It's a 4 months ago i flashed this CM9 on my locked bootloader using SEMC Debrand Engine and installed this recovery CWM Touch :angel:
but today , i have connected my phone to PC .... my PC can't Recognize My Android Phone
after that , i downloaded a flashable stock rom zip 6.1.1.B.1.100 cause i think that if i recovered my Stock ROM it will work ... but ,
failed ! can't connect and RECOVERY DELETED CAUSE I HAVE A BL !
now i have a second problem ,,, how to restore recovery without USB ! ( CWM Touch for BL requires ADB - it's a windows tool !)
PLS HEEEEEEEEEEEELP !!!!!! :crying:
Note : i have tried another USB CABLE and another PC and phone only charges...
Related
Hi guys
I guys i hav a bricked usb port in my x10 & it is stuck at sony errison logo (boot loop)
i cant flash it as da computer will not detect my phone any more however it detects other x10 devices so i kno der is no prob wid my drivers on my computer
what should i do plzzzzzz help ..........
Make sure in which kernel were you after the bootloop, put a working rom for the kernel and flash it via recovery. If you don't have root access or a working recovery, you need to send it to waranty or try use Flashtool or SEUS. And please, use a readable orthography.
hi guys!
i have a problem ...
my friend has the GT 5830c, I installed a custom ROM and it worked perfectly!
But after 5 days of use. the phone crashed and restarting it did not load the system and is in the samsung logo screen!
go for recovery and follow the standard process to reinstall the OS. after reinstalled the system, it gave the same problem! to restart it gets stuck at the boot screen!
Another is that I can only access the download mode. after this try mode recovery, this mode recovery does not enable more!
I tried to flash the stock rom, but the system windows 7 does not recognize the device! already tested on four different PCs and it is not recognized!
already reinstalled windows driver several times and does not work. the computer does not even detect that something was connected to the same!
anyone have a light?
excuse my bad english!
thanks
First of all it is on wrong section.
Definitely, I can't understand your english.
All what I understand from this post is :
1) You installed a Custom ROM on your friend's GT-S5830C device.
2) It worked good until the phone "crashed" and it stuck on bootlogo.
3) After this , you went to CWM Recovery and flash a new Custom ROM again ( You deleted data , cache and dalvik cache ? ). If you install a Custom ROM on your current ROM of course there are high chances of bricking device.
4) So , now it stucked on the bootlogo and it didn't go even of CWM Recovery, right ?
5) Now , you could only access download mode. Sure you would do because the device was bricked.
6) You tried to flash stock ROM.
- Now : What version of ODIN you used ? What PDA , CSC , MODEM , or even pit you put on the ODIN Brackets ? Where did you download , or what TUT you followed to flash Stock ROM ?
- What drivers you installed on PC ( all of them ) ?
- You tried all Computer's USB Porters ?
Answer this questions and let me know what specified problem is it.
Regards,
Sniper Killer
If you are in download mode (not recovery) and different pc's don't recognize the device than probably you have a defected usb cable. Try another cable.
Download mode: Vol up + Vol down + Power.
If recognized as an Unknown device than in device manager remove the device, remove drivers, reboot pc, reinstall drivers, reboot and try plugin device in download mode.
:: Today is the first day of what's left of your life. ::
thanks !!
Sniper Killer said:
First of all it is on wrong section.
Definitely, I can't understand your english.
All what I understand from this post is :
1) You installed a Custom ROM on your friend's GT-S5830C device.
2) It worked good until the phone "crashed" and it stuck on bootlogo.
3) After this , you went to CWM Recovery and flash a new Custom ROM again ( You deleted data , cache and dalvik cache ? ). If you install a Custom ROM on your current ROM of course there are high chances of bricking device.
4) So , now it stucked on the bootlogo and it didn't go even of CWM Recovery, right ?
5) Now , you could only access download mode. Sure you would do because the device was bricked.
6) You tried to flash stock ROM.
- Now : What version of ODIN you used ? What PDA , CSC , MODEM , or even pit you put on the ODIN Brackets ? Where did you download , or what TUT you followed to flash Stock ROM ?
- What drivers you installed on PC ( all of them ) ?
- You tried all Computer's USB Porters ?
Answer this questions and let me know what specified problem is it.
Regards,
Sniper Killer
Click to expand...
Click to collapse
hi guys !
I followed this topic that I created myself when I still had a ACE 5830M !
http://www.androidpt.com/index.php?...ck-rom-galaxy-ace-s5830i-c-e-m-via-odin-root/
it always worked! But this device is not mine, more's the same model!
dont worry guy !
tested on another computer and it worked, i already used much this ACE 5830 before. coincided at 4 micros do not recognize the phone, but the fifth computer tested and recognized!
the custom ROM that gave the problem is exactly a one you are using!
thanks for the help!
admins can lock the topic!
ChelebiTech said:
If you are in download mode (not recovery) and different pc's don't recognize the device than probably you have a defected usb cable. Try another cable.
Download mode: Vol up + Vol down + Power.
If recognized as an Unknown device than in device manager remove the device, remove drivers, reboot pc, reinstall drivers, reboot and try plugin device in download mode.
:: Today is the first day of what's left of your life. ::
Click to expand...
Click to collapse
Thank you friend, have solved the case!
Hi, can anybody help me. I just flashed my locked bootloader x10i with Feralab kernel- [LB]FeraKernel-v15.1-GB just like it instructed ( at this point it is still fine).Then i flashed the Feralab rom -FeraLab_v30.5_Final through CWM ,After that, i try to reboot it ,but the phone just stuck at the sony ericsson text .
When i want to flash it back to stock with flashtool, it wont detect my phone ,it say error , flashing aborted .When i try to flash it to stock with Flashtool 0,291 , it says ERROR - USB\VID_0FCE&PID_ADDE\5&1E642C5D&0&1 and my computer says USB DEVICE CANT BE RECOGNIZED ,I think this is driver related problem cause when I check through Device Manager , I can see a yellow warning mark beside
SEMC Flash Device(it says "A request for the USB BOS descriptor failed." ) and USB Mass Storage Device .I already reinstall PC companion in my windows 8 computer but the problem still persist.
Can anyone help me with this , I mean i cant even get it into flash mode after doing the pressing back while connecting the USB thing to flash it back to stock.
pulldtrigger said:
Hi, can anybody help me. I just flashed my locked bootloader x10i with Feralab kernel- [LB]FeraKernel-v15.1-GB just like it instructed ( at this point it is still fine).Then i flashed the Feralab rom -FeraLab_v30.5_Final through CWM ,After that, i try to reboot it ,but the phone just stuck at the sony ericsson text .
When i want to flash it back to stock with flashtool, it wont detect my phone ,it say error , flashing aborted .When i try to flash it to stock with Flashtool 0,291 , it says ERROR - USB\VID_0FCE&PID_ADDE\5&1E642C5D&0&1 and my computer says USB DEVICE CANT BE RECOGNIZED ,I think this is driver related problem cause when I check through Device Manager , I can see a yellow warning mark beside
SEMC Flash Device(it says "A request for the USB BOS descriptor failed." ) and USB Mass Storage Device .I already reinstall PC companion in my windows 8 computer but the problem still persist.
Can anyone help me with this , I mean i cant even get it into flash mode after doing the pressing back while connecting the USB thing to flash it back to stock.
Click to expand...
Click to collapse
The bootloader should be unlocked first if am not wrong.
ronaksworld said:
The bootloader should be unlocked first if am not wrong.
Click to expand...
Click to collapse
Really , well I thought you can flash Feralab even on locked bootloader Well I guess I get that part wrong . Do you have any idea how to fix the problem above
Solved!
Well guess what , I finally able to flash my phone. First, I detect the all the driver that related with x10i and uninstall its driver completely. Then, I install the driver by disabling driver signature enforcement in windows 8.After that , the usual flashing to stock.
pulldtrigger said:
Well guess what , I finally able to flash my phone. First, I detect the all the driver that related with x10i and uninstall its driver completely. Then, I install the driver by disabling driver signature enforcement in windows 8.After that , the usual flashing to stock.
Click to expand...
Click to collapse
Maybe ask someone in ***FeraLab*** Official - Break The Limits. threat?
http://forum.xda-developers.com/showthread.php?t=1458001
as even am new around here i would suggest you to make at least 10 post then u can visit the above link and ask for help in that threat.
as you said the boot loader was locked and the flashing failed and you are stuck at sony erricson screen, i think you can use Sony PC Suite and restore it to factory (consult someone else too or search in the forums),
BLU in the Flash Tool is the one you should use first to Unlock bootloader, before that backup the device,
Advance\Trim Area\S1 and Raw Device., i did both the methods and i didnt knew what was the best
This [ROM] AOSP JB 4.2.2 - Unlock Bootloader Only, is the one i used and works perfectly fine on my xperia x10i :victory:
http://forum.xda-developers.com/showthread.php?t=2197387
i tried installing cwm using adb and i got it on there but it cant use volume keys wont work and it only boots into cwm ..help ! im pretty sure ive deleted my bootloader and rom . ive tried phenoix suite , live suite adb and odin .. nothing sees the device (will pay for this fix .please )
Hi
i have flashed by mistake flashed i9100 recovery and kernel on a i9100G , now i can't enter recovery or boot , all i can is acess to download mode , but my pc doesn't recognize my phone , tried all drivers , odin on windows , heimdall on linux , and 2 usb cables but can't recognize my phone !
what should i do ?
did you run heimdall with root privilegues?