CWM installed but not booting - Verizon Samsung Galaxy S 4

HI everyone.I am new to this type of stuff and i think a screwed up something .
So i decided to put a custom rom on my samsung galaxy s4 verizon.First of all i rooted vie King root app then i installed rom manager i choosed the correct version and i install Clockworkmod , everyting went well.Then i turned of the phone , hold volume up home button and power button and the same time to enter the cwm recovery.
Samsung logo appears and a blue text appears on the left corner of the screen and then it vibrates and boots up like normal
i tried letting go of the buttons when i see the blue text i tried everyting and it does not boot in any recovery mode not even in stock recovery
BASEBAND VERSION: I545VRUGOC1
KERNEL VERSION: 3.4.0
BUILD NUMBER: LRX22C.I545VRUGOC1
HARDWARE VERSION: I545.07
ANDROID 5.0.1
KNOX: 2.3
sorry for my bad english i will appriciate any help

Do research on the forums before flashing recoveries on a locked bootloader. You will have to do an odin reset to fix this, you cant get CM

Oh so how can i do that odin reset can you please tell me which files do i need ?

actually i can get to stock recovery from rom manager what would happen if i wipe reset from there ?

What to do...
Type Odin on XDA search.... then you will know about Odin.
Go to SAMmobile and find the firmware for the phone.
considering that you learned about Odin and how it works on the first step, flash it.
Good Luck!

So it would not work if i wipe factory reset from stock recovery ?

No. Wipe factory reset will not fix it

Matthew M. said:
No. Wipe factory reset will not fix it
Click to expand...
Click to collapse
i flashed it with odin i downloaded the stock firmware flash was succesful.All my apps and stuff are there its unrooted now but still rom manager says that i have clockworkmod installed and when i try to go in recovery mode nothing happens the phone just vibrates and boots as usual.And now the only way to accses stock recovery is trough rom manager.How can i get rid of clockworkmod ?
thanks in advice

Related

[Q] [URGENT] Phone turns on and reboot (repeatly)

After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
cooza said:
boot to recovery,wipe cache and factory reset.
EDIT:Hold "home+volume up+power" all at the same time until recovery menu appears.
Click to expand...
Click to collapse
borstri said:
reflash with odin some stock firmware if you don't want to wipe, if there is no problem with wiping, just go to recovery and do a factory reset...this has a strong chance of success.
Click to expand...
Click to collapse
After I hard reset and wiped cache..its still reboots..
Someone help me!! :'(
now it looks that only solution is to reflash, go to
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=7#regiona
or
http://forum.xda-developers.com/showthread.php?t=1113928
find something u like and flash it with odin.
http://forum.xda-developers.com/showthread.php?t=1110160&highlight=odin+how+to
dont bother wit finding of exact fw. for you, find something that is for your region....
Is it flash it by using odin?
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
borstri said:
apsolutley with odin, since I suppose that you don't have cwm packed rom on SD card, because in that case does not matter if you have cwm recovery or not..., dont know if you have done it before...bat after beginners fear, it is actually peace of cake...dont be afraid, just follow instructions to the letter...
Click to expand...
Click to collapse
After I flashed it, it turns to the CWM screen and install the Multi-csc..something like that..and it reboot..after it reboot..its still turns to CWM and install the multi-csc.
So what should I do now?
you have done something wrong, or taken wrong rom image, since after flashing with ODIN stock rom you WILL ENDUP with stock recovery! Dont know what you flashed, but it was not stock rom.
What rom you took exactly??
"GT-I9100_SIN_I9100DXKI2_I9100OLCKH1_I9100DXKI1"
I flash this..is this a boot loop or other problem?
Hey dude, thanks for helping me so much..
My phone is working now..but I have to download my things again..=(
Alright. Thanks!
no problem, been in that situation. check some custom roms when u have time....you'll be amazed what this device can do.
and in clockwork recovery you have backup and restore, setup phone just how you like it, make a CWM backup and you are always sure that rescue is there....don't need odin or PC for that.
Flash Supercore with odin as PDA or some other kernel that has CWM recovery
The problem occured again just now, its after i dpwnlpad some apps from market..and its still not completely remove the hanging problem..And my laptop died. LOL.
Anyone here?
May i sugest u reflash stock rom and return it to the store.
If u have random reboot after flashing stock rom there is obviouse something wrong with your device.
hi
my gs2 turns on and reboot repeatly when i put micro sd card and install app in sd card .
help me too .
sorry for bad english .
garylaw said:
After I turn on my Galaxy S II and it hangs for a few seconds and it reboot again and again..
Sometimes stuck on the home screen..
I really don't know why will this happen to my phone. I'm going to trip tomorrow..anyone can help me?
Model : GT-I9100
Android version : 2.3.3 (Stock ROM)
Rooted
Click to expand...
Click to collapse
Your kernel is it also stock?

i9100 boot loop recovery

hi, I have SGS-II I 9100. I was using root box 4 rom on my SGS-II with default kernel. All of a sudden day before yesterday the baseband and IMEI just vanished. Flashing the OEM rom seemed as solution. So I flashed the Android 4.1.2 India rom. It did flashed it successfully. The phone restarts and shows android logo and does something. When it restarts again it goes directly into recovery. I have tried with different versions but its still the same. Tried to flash Siyah kernel and Install custom rom. It still does that goes directly into CWM recovery screen. Can anyone help with this issue. I am clueless on how to fix it. Forgot to mention it does not reboot automatically. When clicked on reboot it shuts down. I then need to pull out the battery and get it back into it and then start the phone.
dimitrix730 said:
hi, I have SGS-II I 9100. I was using root box 4 rom on my SGS-II with default kernel. All of a sudden day before yesterday the baseband and IMEI just vanished. Flashing the OEM rom seemed as solution. So I flashed the Android 4.1.2 India rom. It did flashed it successfully. The phone restarts and shows android logo and does something. When it restarts again it goes directly into recovery. I have tried with different versions but its still the same. Tried to flash Siyah kernel and Install custom rom. It still does that goes directly into CWM recovery screen. Can anyone help with this issue. I am clueless on how to fix it. Forgot to mention it does not reboot automatically. When clicked on reboot it shuts down. I then need to pull out the battery and get it back into it and then start the phone.
Click to expand...
Click to collapse
Flash stock firmware again via Odin when you phone booting after flashing press volume up+home +power button for 10sec it's give you stock recovery then select wipe data factory reset then reboot your Device it will successfully boot
Sent from my GT-I9100 using xda premium
gauravgymnast08 said:
Flash stock firmware again via Odin when you phone booting after flashing press volume up+home +power button for 10sec it's give you stock recovery then select wipe data factory reset then reboot your Device it will successfully boot
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I did it twice. flashing 4.1.2 roms from different regions.did try factory reset. that too doesnt work. Still stuck at recovery screen. it just wont step out of it.
You flashed stock with odin and it go's to cwm? What did you flash? Were did you get it from?
andrewwright said:
You flashed stock with odin and it go's to cwm? What did you flash? Were did you get it from?
Click to expand...
Click to collapse
Thank-you for your reply. I flashed Stock i9100 from Sam firmwares. Gave a try to India, UK and italy edition. It does not go to CWM but rather goes into android recovery wizard. The screen where you see red triangle with android died or something. Its been more than a day and still cant find how to fix it. After flashing the stock firmware when i reboot my phone I get to a screen with android and status bar right at the bottom of it. Probably installs boot loader or something it the second screen once you reboot your phone after flashing the stock firmware. The next time you reboot you should be getting to OS right? But it takes me to recovery instead? What does it expect me to do in the recovery screen? I really don't know. I can access only 2 modes Download and recovery.
Here's the thing..3e recovery is the samsung default recovery mode whereas CWM is a customized one.
You either flash it via Odin or you flash a custom kernel via odin to get it.
Anyway, as long as you are NOT on 4.0.4 you can factory reset and wipe cache via stock recovery (3e).
Again, what did you flash exactly?
Sent from...this is not even my S2

i9100g bootloop and no home button

Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working. I tried to flash a stock rom and I got a successful flash, but a bootloop at restart.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
I can flash using odin using a usb jig to put it in download mode
So... What do you propose to do?
Thanks in advance!
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Flash DorimanX kernel and restore home button in STweaks.
GamingDj said:
Flash DorimanX kernel and restore home button in STweaks.
Click to expand...
Click to collapse
Uhm I think this is not the only viable solution.
Investigations and trials
pantweb said:
Hello,
I am an owner on a i9100g on cyanogenmod 10.1 stable...
The Home button suddently stopped working.
I would like to know if it is an hw related issue or it is related to cyanogenmod.
My issues are:
I cannot go in Recovery mode since Home button doesn't work
If I select reboot to recovery mode the phone restart several times and finally boots successfully
So... What do you propose to do?
1) Flash a stock rom via Odin (so I do not need the Home button)
2) Is it possible to flash a newer version of Cyanogenmod via odin?
Thanks in advance!
Click to expand...
Click to collapse
Hello,
I have the same issue, I was in CM 10.1.1 stable and home button not working.
Then, I tried to flash a stock ROM via Odin, and now my phone is stuck in a bootloop...
I tried to flash different ROMS (always stock from sammobile.com) but every time the result is the same: bootloop.
The problem is that as my home button is not working, I cannot go into recovery mode to do a factory reset or flash a custom ROM, neither in download mode (I use a home made JIG for this).
I have also tried to flash the correct OMAP pit file, hoping for it to do a full wipe, but did not work either, my phone is still in a boot loop.
My last hope would be to do a OMAP flash as described here: link
But I am not sure it will fix the problem and this solution is quite risky...
Does anyone have another idea / suggestion ?
Also, I am not confident in changing my home button as it is necessary to remove the LCD first...
@GamingDj: I did not found any i9100g compatible DorimanX kernel, only i9100...
Many thanks in advance for your help.
Cheers
Help
Any help on this issue please ?
My phone is still dead
Fixed it !
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Can u use adb?
then, you can enter the recovery mode by using adb reboot recovery
Sent from my Nexus 4 using Tapatalk 4
abuisset said:
I found a way to make it work, and I think it can be useful to some other people.
Here is what I did:
Remove the battery and insert it back in
Insert a USG jig to enter Download mode
Flash a stock ROM from sammobile.com using ODIN, Auto-reboot should be UNCHECKED
Phone will stay in Download mode after the flash is complete. This way the phone will NOT install the package yet
Remove the battery and insert it back in
Plug the JIG to enter Download mode again
Flash the right version of CWM kernel
Reboot the phone
What it did is that the phone tried to install the stock ROM, and ran CWM kernel (instead of the stock one).
The phone boot in Recovery mode with a little instruction at the bottom "Invalid args"
My guess is that CWM does not have the same API and failed to execute the commands.
But... Who cares ? I was in Recovery mode
I was able to Wipe data/Factory reset and wipe cache. Phone is back to life (Home button still broken though...).
Hope this tread can help others in the same position...
Cheers !
Click to expand...
Click to collapse
can you point out what cwm kernel you put on?
RadarZgin said:
can you point out what cwm kernel you put on?
Click to expand...
Click to collapse
Hello,
Here is what I used:
Stock Firmware 4.0.3 I9100GXXLPN from sammobile.com
CWM 6.0.1.2
Odin3 v1.85
Cheers,
Anthony

What am I doing wrong?

Hey,
I have since become a S3 ... I have rooted it and wanted to play another Rome.
First I flashed my Carbon ... that was wonderful, but I had no wifi. Then I tried another Rom (with aroma installer). When I had WiFi, but since I have the menu did not like it and it was me too many Samsung Apps.
Now I have flashed me the Resurrection Remix, but the S3 boots constantly new to the CWM.
The same I have with CM11.
What am I doing wrong please?
lolamarcel said:
Hey,
I have since become a S3 ... I have rooted it and wanted to play another Rome.
First I flashed my Carbon ... that was wonderful, but I had no wifi. Then I tried another Rom (with aroma installer). When I had WiFi, but since I have the menu did not like it and it was me too many Samsung Apps.
Now I have flashed me the Resurrection Remix, but the S3 boots constantly new to the CWM.
The same I have with CM11.
What am I doing wrong please?
Click to expand...
Click to collapse
You need to install exactly like below don't miss any steps
-Installation-
1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot
If it still not working flash TWRP recovery and use that to flash the rom
Hey,
I just did it. Then came the Samsung logo, phone restarts and I'm back in the CWM.
Have just flashed TWRP reboot (via CWM) Recovery and but still have CWM.
Grrrrrr ...... what for now
Better download official firmware from Sammobile and install thru Odin. Then Root and carry on with your favorite custom rom.
Yes I agree with KSKHH if problem still there return to stock with odin and start again..
tallman43 said:
Yes I agree with KSKHH if problem still there return to stock with odin and start again..
Click to expand...
Click to collapse
How are you doing? Your phone is working now?
Hey,
so suck an official firmware and flash it with Odin ... then the CWM away again?
If I then use the rooten begin I play me but come back on automatically, or not?
lolamarcel said:
Hey,
so suck an official firmware and flash it with Odin ... then the CWM away again?
If I then use the rooten begin I play me but come back on automatically, or not?
Click to expand...
Click to collapse
Steps:
Install ORIGIANAL firmware via ODIN
Don't need to root
INSTALL CUSTOM RECOVERY
Copy desired ROM into memory card (or intrernal, if dont have memory card)
Wipe all
Install
Profit
Hey,
I have now taken me this firmware:
I9300XXUGML2_I9300DTMGML2_I9300BOUGMK3_HOME.tar
Odin started, specified in the PDA tar file, made ​​my S3 in the download mode, USB cable ran ... it was detected and was also flashed. Now I sit for at least 10 minutes and nothing happens.
The Samsung logo always changes its color and the LED on the top left light blue.
lolamarcel said:
Hey,
I have now taken me this firmware:
I9300XXUGML2_I9300DTMGML2_I9300BOUGMK3_HOME.tar
Odin started, specified in the PDA tar file, made ​​my S3 in the download mode, USB cable ran ... it was detected and was also flashed. Now I sit for at least 10 minutes and nothing happens.
The Samsung logo always changes its color and the LED on the top left light blue.
Click to expand...
Click to collapse
Boot into recovery then factory reset..
hey,
exactly these thoughts I had just as well.
Meanwhile, I have written this text did something on the screen ... the phone goes again.
Thanks to all
So now just flash a recovery and then flash as usual custom of Rome?
Edit:
GT-I9300
Android 4.3
Baseband I9300BOUGMK3
Kernel: 3.0.31-2303192 [email protected]#1 FriDec 13 21:55:31 KST2013
Build: JSS15J.I9300XXUGML2
Edit2:
Hey,
so, now I have successfully flashed TWRP and tested.
Now I'll try to flash CM11 ... hopefully it starts this time also
Edit 3:
so, now it has worked wonderfully.
Thanks again for the help

[Q] I9200 boot loop, can't access recovery mode

I flashed a 4.4.2 stock rom for my mega 6.3 and now it's stuck in the ''recovery booting'' screen with the samsung logo, i can access download mode easily. I've searched, and i think i have to do a factory reset, but i can't access recovery mode (vol up+ home+ power), i've tried everything :/ it just won't boot in recovery mode, so i don't know what to do now, i can successfully flash everything with odin and downlaod mode, but it just keeps on the recovery booting screen, please help!.
Did you try adb?
dnlmihaila said:
Did you try adb?
Click to expand...
Click to collapse
Yup, it doesn't recognize the device
Just out of curiosity, have you had the screen replaced on it? That's a common error that has occurred to a lot of people when they've gone back. It's in another thread if you have. Other than that, I have no idea, but it a factory reset is recommended after the install, I'm not sure if you can get the phone loaded to do it. Good luck!!
JCSouth said:
Just out of curiosity, have you had the screen replaced on it? That's a common error that has occurred to a lot of people when they've gone back. It's in another thread if you have. Other than that, I have no idea, but it a factory reset is recommended after the install, I'm not sure if you can get the phone loaded to do it. Good luck!!
Click to expand...
Click to collapse
Nope, yeah, the phone just boots to the samsung logo and it's stuck there forever :/ i can go to download mode and flash roms, but can't access recovery mode, it just won't do it, i've tried every button combination, the far i've get, is the same samsung logo, but with blue letters on the top that say something like ''recovery booting...''
faced the same problem when updating 4.4.2 via odin.
any ideas?
squall_kay said:
faced the same problem when updating 4.4.2 via odin.
any ideas?
Click to expand...
Click to collapse
Just flash a custom recovery CWM Philz touch or TWRP - (the one silesh made) and perform a factory reset with the cusom recovery and if just a fyi you don't need to be rooted to flash a custom recovery.
alexischino said:
Just flash a custom recovery CWM Philz touch or TWRP - (the one silesh made) and perform a factory reset with the cusom recovery and if just a fyi you don't need to be rooted to flash a custom recovery.
Click to expand...
Click to collapse
I've tried flashing custom recoverys, but still, it won't boot into recovery mode :/ it only shows blue letters on the top ''booting into recovery mode'' but it doesn't do anything
have same problem with I9200 device wont boot after flashing stock 4.4.2 and i cant downgrade it
any idea?

Categories

Resources