Hi, I have the L21 model on B130 and got a notification today that B140 is available. I am rooted and am not sure if it's safe for me to take the update while being rooted.
Can someone advise me please? Thanks for your help.
if you want to apply official updates you must have the recovery stock
maybe you should follow this guide and use the latest update (B151) .. much better
http://forum.xda-developers.com/honor-5x/how-to/guide-flashing-stock-roms-l24-l21-l22-t3358478
or
http://forum.xda-developers.com/honor-5x/development/methods-to-stock-rom-flashing-custom-t3358468
Thank you so much, it's just that I read that B151 is only available for L24?
Unroot & remove any edits in /system then flash stock recovery to install the update
Sent from my HUAWEI KII-L21 using Tapatalk
faisalsiddiqui said:
Thank you so much, it's just that I read that B151 is only available for L24?
Click to expand...
Click to collapse
but you can install it on your device: Read "[Guide]Flashing stock ROMs of L24 on L21/L22"
http://forum.xda-developers.com/honor-5x/how-to/guide-flashing-stock-roms-l24-l21-l22-t3358478
I also got the update... Should i update right away?? It says to factory reset after flashing for optimal results... Is it necessary???
Sent from my KIW-L21 using Tapatalk
Thanks a lot everyone for pitching in and helping us noobs!
Arobase40 said:
You only know what is good for you.
If you don't notice any specific issues after the update, then you may probably not need to factory reset.
If you do then better backup everything first.
PS : I guess you are both from UK ?
Click to expand...
Click to collapse
I already updated and don't feel the need to reset... I didn't notice new things.. But the os feels a lil snappier. ..
Also i don't about him... But I'm from Pakistan...
Sent from my KIW-L21 using Tapatalk
Faheemarif252 said:
I already updated and don't feel the need to reset... I didn't notice new things.. But the os feels a lil snappier. ..
Also i don't about him... But I'm from Pakistan...
Sent from my KIW-L21 using Tapatalk
Click to expand...
Click to collapse
it would be great if you could upload the OTA.zip or capture the OTA URL
@Arobase40 if you get prompted for the update do a logcat and capture the update URL
Code:
adb logcat -c - to clear the log and then
adb logcat -d > logcat.txt - to dump the log to your harddrive
you should see some kind of http://update.hicloud.com:8180 address in the log that leads to the update.zip file
Arobase40 said:
Well, if you own a KIW-L21 maybe Huawei/Honor is considering you're from UK... Just an assumption...
Anyway, even though you received the B140 notification is a good news we're still pretty late compared to the US...
Click to expand...
Click to collapse
We sure are... I think we'll also receive the MM update later than the l24 variant....
Sent from my KIW-L21 using Tapatalk
---------- Post added at 07:42 PM ---------- Previous post was at 07:41 PM ----------
clsA said:
it would be great if you could upload the OTA.zip or capture the OTA URL
Click to expand...
Click to collapse
I would love to do so if you tell me how to...
Sent from my KIW-L21 using Tapatalk
I live in france have the l21 but haven't recieved an notiication of update i am on b130 and unlocked bootloader and root what can i do ?
haha thanks !
Arobase40 said:
heah heah heah seems like I got luckier than I thought as just after I "downgraded" to completely stock to test the new Xposed Framework I got the update notification !!![emoji23]
I tried to logcat as you said but I'm stuck at the adb instruction :
130|[email protected]:/sdcard $ adb logcat -c
* daemon not running. starting it now on port 5038 *
* daemon started successfully *
- waiting for device -
^C
130|[email protected]:/sdcard $ adb logcat -d > logcat.txt
- waiting for device -
Don't understand why but I'm in a adb shell... ^^
Click to expand...
Click to collapse
Exit the shell just do it from command
Clear the log
Check for update start the download
Take the logcat
Find the url
Sent from my KIW-L24 using Tapatalk
Arobase40 said:
Sorry for the wrong expectation and the false hope but seems like this was not the update I expected...
The download and update was very quick and the version is still B130... :crying:
Click to expand...
Click to collapse
10-4 still good practice
Sent from my KIW-L24 using Tapatalk
Arobase40 said:
???
Click to expand...
Click to collapse
Lol its good to practice doing a logcat and looking through it
Sent from my KIW-L24 using Tapatalk
Arobase40 said:
Okayyy, but what 10-4 means ???
I'm actually watching at the log even though I'm sure I won't find any reference to the update or what it this one is...
Click to expand...
Click to collapse
http://www.urbandictionary.com/define.php?term=Ten+Four
Sent from my KIW-L24 using Tapatalk
Ota link should be here
/data/data/com.huawei.android.hwouc/shared_prefs/
I don't remember the file
Sent from my HUAWEI KII-L21 using Tapatalk
i have L21 variant and i received B140 update, unfortunately whenever i try to install it i end up with the same error "software install failed" even though i uninstalled xposed and restored the original build.prob
anyways i tried to look into the OTA link in the directory provided by AL_IRAQI and this is what i found
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v45539/f1/[email protected]#
i'm not quite sure but i think this is the OTA update
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v45539/f1/full/update.zip
after missing around with update.zip file i can confirm its the ONE :highfive:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Arobase40 said:
HELP !!!!
I finally received the B140 notification with size 177MB...
I guess the reason I didn't received before was because I pulled my sim card off using only wifi... As soon as I put my sim card back I got the notification... lol
I did the logcat but could find the correct link for the update...
My phone is actually not rooted.
PS : Never mind, I got it and I'll try to upload it somewhere but I have a small data plan left... ^^
Click to expand...
Click to collapse
like I said before it takes practice to grab the logcat at the right time
when you get the update notification plug the phone into your pc
clear the log and then just before you click the update grab the logcat
the link is the actual update button you click it and it starts the download
after that the url is gone
i recieved the notiication but i am rooted and have unlocked bootloader can i do the update ?
---------- Post added at 10:29 AM ---------- Previous post was at 10:02 AM ----------
tried to update but no work i unrooted but i want to remove twrp
Related
We got a tip and a screenshot of this for the N10, but I'm starting to suspect it was fake. Has anyone at all gotten the JWR66Y update today?
http://i.imgur.com/hIQjX2h.png
dunno about the n10, but the GN yakju update has been confirmed so it is likely i suppose.
http://android.clients.google.com/p....signed-yakju-JWR66Y-from-JWR66V.1b0ac7df.zip
edit: i got the link from this thread: http://forum.xda-developers.com/showthread.php?t=2414147
Saw that one, but I'm just looking for a confirmation on the N10.
Archon810 said:
Saw that one, but I'm just looking for a confirmation on the N10.
Click to expand...
Click to collapse
I got a very small system update last night on my N10. Not sure what the build number was on it. Can check later.
Just checked but still no updates for my N10, build JWR66V..I heard it's only a little security fix but I'm not sure about that
Inviato dal mio Nexus 10 usando Tapatalk 4
AleCai said:
Just checked but still no updates for my N10, build JWR66V..I heard it's only a little security fix but I'm not sure about that
Inviato dal mio Nexus 10 usando Tapatalk 4
Click to expand...
Click to collapse
Yes, JWR66Y is a very small update. There are no new features. It's purely a security update.
RogueWing said:
I got a very small system update last night on my N10. Not sure what the build number was on it. Can check later.
Click to expand...
Click to collapse
Just checked. That is the update I got last night.
nothing so far in my Nexus 10 or Nexus 4, but sounds like is real.. mostly bug fixes I guess.
Got it right now but installation failed because I had CWM touch recovery installed...
Now I can't get the update again...
Enviado desde mi Nexus 10 usando Tapatalk 2
Can you go into your /cache folder and get the name of the zip file?
I got it just now. Wouldn't update because I'd changed Velvet.apk now I can't get it again.
EDIT:
Ah, nice it was in cache like someone mentioned above. It is indeed JWR66Y
EDIT 2:
Copied it to the internal, flashed in TWRP. It said patching, removed root, but failed on flashing recovery.
I'll upload the file in a moment.
OK. If you guys get the update again, please look in your /cache folder and give us the filename before you try to install it. Once we have the filename, we can provide the link to the file on Google's server. That way, if you can't get it again, it won't matter because you can just download the file directly. Thanks!
Check above
---------- Post added at 09:45 PM ---------- Previous post was at 09:38 PM ----------
I couldn't sideload it using the stock recovery :/ It failed on "setperms"
I'll have to grab factory image and unpack it into a CWM zip at some point.
If anybody could make a zip for CWM thatd be awesome :good:
mine also fails at permissions - check this thread out seems to be figured out -http://forum.xda-developers.com/showthread.php?t=1745781&page=53
a line needs to be changed to #set_perm(0, 0, 0544, "/system/etc/install-recovery.sh"); because of the way the daemon is in supersu if somebody could whip up a manta zip like the ones they have were set
oldblue910 said:
OK. If you guys get the update again, please look in your /cache folder and give us the filename before you try to install...
Click to expand...
Click to collapse
I have JWR66Y downloaded from Google and haven't installed it yet on my unrooted N10. Do you need to be rooted to see the files in the /cache directory?
---------- Post added at 03:39 PM ---------- Previous post was at 03:14 PM ----------
Here's where the action is on this topic:
http://forum.xda-developers.com/showthread.php?t=2413535&page=15
So I ended up making my own zip for CWM, changed the line I mentioned above and removed the asserts. Worked fine here but flash at your own risk. Flashed supersu 1.51 after flashing the update and answered No to fixing the recovery.
**Only use if you are on Google's stock JWR66V odex hasn't been tested with other "stock" roms
NeoMagus said:
So I ended up making my own zip for CWM, changed the line I mentioned above and removed the asserts. Worked fine here but flash at your own risk. Flashed supersu 1.51 after flashing the update and answered No to fixing the recovery.
Click to expand...
Click to collapse
So, it appears that it's a small security update, it'll remove root, and I can expect to have problems with it with TWRP. Nice. Got it early this afternoon, will have to mess with getting it working later.
Jackietreehorn said:
So, it appears that it's a small security update, it'll remove root, and I can expect to have problems with it with TWRP. Nice. Got it early this afternoon, will have to mess with getting it working later.
Click to expand...
Click to collapse
Dude, every OTA ever in history removes root and reflashes stock recovery. This isn't news. Just flash and then re-root. It's a Nexus. You can do that.
Sent from my Xoom using Tapatalk 4
The 1.8MB OTA has arrived in UK:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NeoMagus said:
So I ended up making my own zip for CWM, changed the line I mentioned above and removed the asserts. Worked fine here but flash at your own risk. Flashed supersu 1.51 after flashing the update and answered No to fixing the recovery.
Click to expand...
Click to collapse
Will it work with twrp as well?
Sent from my Nexus 10 using xda app-developers app
This guide is how I updated to latest firmware with TowelRoot still intact.
I downloaded the firmware from Sammobile.com.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Put the .tar file on SD card.
Open Mobile Odin pro.
Scroll down to open file. Press it.
Choose the .tar file.
Checked Enable EverRoot and Inject Superuser.
I choose to wipe dalvik cache which is optional.
Pressed flash firmware and that's it!
Good luck.
Sent from my SM-G900T using Tapatalk
if flashinglike you
* I lose my apps?
i dont want lose root
carvajaljn said:
if flashinglike you
* I lose my apps?
i dont want lose root
Click to expand...
Click to collapse
You don't lose apps or root. That's the point of the post.
Sent from my SM-G900T using Tapatalk
Tnks!! now ..
i buy my mobile and this is unlock of sim.. if i install this dont lose the unlock?
Why "open file ..." and not " OTA / update zip " ?
soyimparable said:
Why "open file ..." and not " OTA / update zip " ?
Click to expand...
Click to collapse
Because it puts all the partitions in the right places.
Sent from my SM-G900T using Tapatalk
Have you noticed that you still keep root but will become custom, not official firmware... still no tripped knox
GastonC said:
Have you noticed that you still keep root but will become custom, not official firmware... still no tripped knox
Click to expand...
Click to collapse
Long as knox isn't tripped I don't care if it says custom lol. Mine said official until I altered the build prop.
Sent from my SM-G900T using Tapatalk
I didn't alter anything. What is build prop? I just installed a couple more apps that need root access....
Any chance of hooking us up with a fast mirror? Sammobile is a pain
MrFhenix said:
Any chance of hooking us up with a fast mirror? Sammobile is a pain
Click to expand...
Click to collapse
Try this. I didn't use it but it's worth a shot.
http://forum.xda-developers.com/showthread.php?p=54542250
Sent from my SM-G900T using Tapatalk
philliman said:
Try this. I didn't use it but it's worth a shot.
http://forum.xda-developers.com/showthread.php?p=54542250
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Can you tell me if it updated your camera firmware??
just tellme your current CAM FW version
Thank you,
Got latest FW NG3, Rooted, Knox 0x0, Official status retained
Spend two hours trying to get Odin Pro to work and then realized I switched to ART DOH!!! Switched back to Delvik, spend $4.99, and it took all 5 minutes.
hzm82 said:
Thank you,
Got latest FW NG3, Rooted, Knox 0x0, Official status retained
Spend two hours trying to get Odin Pro to work and then realized I switched to ART DOH!!! Switched back to Delvik, spend $4.99, and it took all 5 minutes.
Click to expand...
Click to collapse
Thats wassup!! Congrats!
We're the instructions clear enough for you? I'm just curious.
Sent from my SM-G900T using Tapatalk
worked out great
Thanks philli for this
Followed the instructions and was very easy without any fails. The bootloader didn't update so I updated it with pc odin and now everything is all good.
xposed need to be reinstalled, and a few reboots later. up and running
Thanks again
anyone have a good link to download this firmware to the phone sd card
Thanks all
dallasnights said:
anyone have a good link to download this firmware to the phone sd card
Thanks all
Click to expand...
Click to collapse
Post #12
Sent from my SM-G900T using Tapatalk
MrFhenix said:
Can you tell me if it updated your camera firmware??
just tellme your current CAM FW version
Click to expand...
Click to collapse
3.0
Sent from my SM-G900T using Tapatalk
slicknsxy said:
Thanks philli for this
Followed the instructions and was very easy without any fails. The bootloader didn't update so I updated it with pc odin and now everything is all good.
xposed need to be reinstalled, and a few reboots later. up and running
Thanks again
Click to expand...
Click to collapse
did you lose root or still have root
ahmadroid said:
did you lose root or still have root
Click to expand...
Click to collapse
i did not lose root
Hello All
Here I will Share the Pre-Rooted Firmwares for
Samsung Galaxy Grand Prime VE SM-G531F
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These Pre-Rooted Firmwares can be flashed via Odin3 flasher, Just select the file in AP Field, Like you flash any Stock ROM of this model.
Notice:
- Make sure your phone is SM-G531F before flashing.
- Do this on your own responsibility.
Pre-Rooted SM-G531F Firmwares:
- G531FXXU1AOH1: Download AFH Link
Thanks...trying it...
It works! Thanks!
PS: can you create a step-by-step tutorial on how you came up with this root method?
xjpmauricio said:
It works! Thanks!
PS: can you create a step-by-step tutorial on how you came up with this root method?
Click to expand...
Click to collapse
I am happy that it worked for you bro, Please which version did you used?
Indeed i did not do it myself
another person did it and I only repacked the system.img
He is working on G531H model now
Hi, I've used this version: G531FXXU1AOH1
This is my original post regarding this subject: http://forum.xda-developers.com/grand-prime/general/root-sm-g531f-t3182124
Full work 100%. Easy install for Odin and Knox 0x0 .
Great. Now we need a recovery that dont **** our knox time to wait again ^^
zatoshi said:
Full work 100%. Easy install for Odin and Knox 0x0 .
Great. Now we need a recovery that dont **** our knox time to wait again ^^
Click to expand...
Click to collapse
Good for you bro, Which version did you use?
andro-man said:
good for you bro, which version did you use?
Click to expand...
Click to collapse
g531fxxu1aoh1 :d
Hi guys I'm also interest to create rooted firmware for Samsung new models can you put a tutorial
Sent from my ONE A2001 using XDA Free mobile app
Hi all ! What about ....OG5? Cuz I've got this baseband version. This OH5 will works?
All works used both roms work perfectly.
Enviado desde mi SM-G531F mediante Tapatalk
zatoshi said:
All works used both roms work perfectly.
Enviado desde mi SM-G531F mediante Tapatalk
Click to expand...
Click to collapse
Thanks man ! I will try it. but first my apartment need be a finish when I find my laptop.
Cheers and thanks again
Hi, can someone tell me are these firmwares delete user data?
vlabns said:
Hi, can someone tell me are these firmwares delete user data?
Click to expand...
Click to collapse
No..I have not get any userdata changed after flashing with odin.
I have rooted sucessfully with G531FXXU1AOH1_Prerooted_System_v5.1.1...
My existing build No
G531FDDU1AOH2..
My existing baseband No
G531FDDU1AOH1..
After flashing pre-rooted rom i got changed
My New build No
G531FXXU1AOH1
My New baseband No
G531FDDU1AOH1..
I got an new app named SuperSU and Security clean master in app menu..
Then i Updated SuperSU binaries..
After that i prompted as " security notice...Unauthorised actions found and click to restart for undo actions".
I gave it k ,Bcz it going on prompting me again and again...
But After restart also its same...any help?
---------- Post added at 07:21 PM ---------- Previous post was at 07:16 PM ----------
Found solution for Security Notice Problem after root.
Download any "system app remover"
Open it and scroll down till you see " security log agent"
Long click on it
Click on "disable" or else unistall it.
Now am Having my Samsung Galaxy grand Prime 4G SM-G531F is fully rooted and working fine.
I got rid of sd card security permission problem by,
http://android-revolution-hd.blogspot.in/2015/01/how-to-unlock-external-sd-card-writing.html
vlabns said:
Hi, can someone tell me are these firmwares delete user data?
Click to expand...
Click to collapse
Hi, not sure but I think after change a rom its always better to perform a wipe. And start install all over again.
Anyway, BIG step foward ! Now I dreaming about custom recovery like CWM or TWRP
Cheers!
You guys have the s6 like weather widget? B/C us with 5.0.2 have the old one and in the lockscreen have only the clock and no weather.
If so, can someone of you share the systemUi. Apk and weather widget oh and seclauncher please.
?
Enviado desde Tapatalk
Hi !
I just flash version 5 and it stuck at samsung logo (small dots still blinking) how long I need to wait ?
Now like 10 minutes
edit:
it does not work... I'm back to stock and will try this first version
I was try with lastes version of odin - same issue.
back to stock - try OH1 and I will give info here
ActivNoiz said:
Hi !
I just flash version 5 and it stuck at samsung logo (small dots still blinking) how long I need to wait ?
Now like 10 minutes
edit:
it does not work... I'm back to stock and will try this first version
I was try with lastes version of odin - same issue.
back to stock - try OH1 and I will give info here
Click to expand...
Click to collapse
Hello
I had the same situation but version "1" works fine for 2-3 days. I only just had to stop SecurityLogAgent.
mar_79 said:
Hello
I had the same situation but version "1" works fine for 2-3 days. I only just had to stop SecurityLogAgent.
Click to expand...
Click to collapse
Great ! After flashing I will check all
Cheers!
And one more thing: disable that security log agent
Hi!
OH1 works ! At last superuser works ! Binary installed ! Thanks a lot !
Hi guys, I'm returned after Mate 8 experience.
I've write a small program to track all Huawei change in Official rom.
Here
L09
B103
B130
B150
B151
B160
B161
L29
B152
VIE-L29C10B160
I'll update this thread for every rom that I'll find.
How update
Insert the Micro SD card into the handset and power on. After entering call -> enter:*#*#2846579#*#* -> ProjectMenu -> Software Upgrade -> SDCard Upgrade-> OK，
Important:
To return full stock consider that B103 is first official full rom. Together with update.pp you must put also this file (unzip) to have this structure on dload directory
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please HIT a THANKS BUTTON if I help you.
acer73 said:
Hi guys, I'm returned after Mate 8 experience.
I've write a small program to track all Huawei change in Official rom.
Here
B103
B160
I'll update this thread for every rom that I'll find.
Click to expand...
Click to collapse
hi there...possible to find out how to check which ROM im on? and if im allowed to download other ROMs instead?
My VIE-AL10 (C00***) has already jumped two more versions. I was on B163 over the weekend and yesterday on to B169. It is good to see some mionor bug fixes coming through as and when rather than the once or twice a month depending if your running the developer ROM.
Sathelp said:
My VIE-AL10 (C00***) has already jumped two more versions. I was on B163 over the weekend and yesterday on to B169. It is good to see some mionor bug fixes coming through as and when rather than the once or twice a month depending if your running the developer ROM.
Click to expand...
Click to collapse
Thats the advantage of buying China version of the Phone. Developer rom gets updates every month, while stable version gets update about every 2 months. International version gets update like maybe twice a year.
zimmy83 said:
hi there...possible to find out how to check which ROM im on? and if im allowed to download other ROMs instead?
Click to expand...
Click to collapse
Hi mate, you can go in info and read model number
warea said:
Thats the advantage of buying China version of the Phone. Developer rom gets updates every month, while stable version gets update about every 2 months. International version gets update like maybe twice a year.
Click to expand...
Click to collapse
Yes it's real for official update. But I show that rom are on Huawei server. In China last rom is B168 in Europe now B160 but smartphone have customer see only B103 . This is the reason of my thread share with other rom that I find on Huawei server
acer73 said:
Hi mate, you can go in info and read model number
Click to expand...
Click to collapse
great will go check later...have not even used the phone cause was unable to link it up with google contacts and google calendar which is pretty annoying as all my work contacts and appointments are linked to that.
was told there is some apps on the HW app store which allows for this will have to try it tonight. i think its called Calendar and contact sync adapter.
I've downloaded your B160 file and installed it over the phone menu
extracted the downloaded file, copied the update.app to the dload folder on my sdcard and then installed it without problems
thank you!
(Huawei p9 plus vie-l09 from o2 germany)
tomoffel said:
I've downloaded your B160 file and installed it over the phone menu
extracted the downloaded file, copied the update.app to the dload folder on my sdcard and then installed it without problems
thank you!
(Huawei p9 plus vie-l09 from o2 germany)
Click to expand...
Click to collapse
Stay tuned. In weekend a lot of stuff. My tool, twrp recovery and other
I've update first post with new rom
Can you post any L29 ROMs please?
Sent from my EVA-L29 using Tapatalk
geovass said:
Can you post any L29 ROMs please?
Sent from my EVA-L29 using Tapatalk
Click to expand...
Click to collapse
I haven't L29 so I can't use my tool on smartphone. I need real smartphone to capture Huawei files. Sorry for this but I'll study something useful for have this rom
Can you please share your tool with me, so i could get new ROMs for L29 and share with the forum?
Guys tomorrow I'll publish this tool and TWrp recovery with decrypt option
Could we get new ROMs (official) with this tool?
Sent from my EVA-L29 using Tapatalk
geovass said:
Could we get new ROMs (official) with this tool?
Sent from my EVA-L29 using Tapatalk
Click to expand...
Click to collapse
No. Tool is useful only for custom rom (es. twrp, backup/restore)
update first post
If you need help with the decrypt option give me a shout, as I've defeated it for Mate 8 / P9.
P
paulobrien said:
If you need help with the decrypt option give me a shout, as I've defeated it for Mate 8 / P9.
P
Click to expand...
Click to collapse
Hi, mate I've see all your great work. As you can see from image decrypt work. Your reverse engine is really great. Only problem of your source is data partition backup (255 error). I've worked on this matter.
acer73 said:
Hi, mate I've see all your great work. As you can see from image decrypt work. Your reverse engine is really great. Only problem of your source is data partition backup (255 error). I've worked on this matter.
Click to expand...
Click to collapse
Oh, I've not seen the 255 error! What caused it?
P
Sent from my HUAWEI NXT-L29 using Tapatalk
According to some sources, the update came out.
There are april security patches, daydream and improvments.
I have B03 and I don't have any update via fota.
Any news, SD update source?
https://www.z-union.eu/thread/853-axon-7-firmware-1-3b04-daydream/?postID=4450#post4450
https://www.android-hilfe.de/forum/...3281/a2017-g-oreo-8-0-ota.893361-page-24.html
great
we are hope for a new SLIM ROM from @raystef66 and we need the fingerprint for @Didgeridoohan Magisk Module :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WTF, april the 1st....
---------- Post added at 10:46 PM ---------- Previous post was at 10:36 PM ----------
So if someone happens to get an OTA, how do you capture it on a non rooted, stock phone?
RobboW said:
WTF, april the 1st....
---------- Post added at 10:46 PM ---------- Previous post was at 10:36 PM ----------
So if someone happens to get an OTA, how do you capture it on a non rooted, stock phone?
Click to expand...
Click to collapse
you can logcat the download link
I do not have nothing.. still waiting.. on B03
Does it support gcam natively???
rzarectha said:
you can logcat the download link
Click to expand...
Click to collapse
I see that you are from Romania. I am going to speak in english, because this is a english speaking board.
If you are on Digi.Mobil network can you tell me if you can enable VoLte on this network with this update, when you install it on your device?
Right now i am on Android 7.1.1 B10 and its ok for me. I tried android 8 and i didnt like it, but i would switch only if VoLte will work with Digi.Mobil
Tnx in advance:good:
dumyro said:
I see that you are from Romania. I am going to speak in english, because this is a english speaking board.
If you are on Digi.Mobil network can you tell me if you can enable VoLte on this network with this update, when you install it on your device?
Right now i am on Android 7.1.1 B10 and its ok for me. I tried android 8 and i didnt like it, but i would switch only if VoLte will work with Digi.Mobil
Tnx in advance:good:
Click to expand...
Click to collapse
Sure thing!
I am on digi so I can confirm this for you but I'm waiting for the update.
So far nobody has a download link to it
I'm still wondering if it's a hoax. That picture showed 1st of April as the date.
RobboW said:
I'm still wondering if it's a hoax. That picture showed 1st of April as the date.
Click to expand...
Click to collapse
That's the date for the April security patch. B03 is 1st of November.
It is a bit weird though that nobody got the file in 3 days, I'll give you that.
rzarectha said:
That's the date for the April security patch. B03 is 1st of November.
It is a bit weird though that nobody got the file in 3 days, I'll give you that.
Click to expand...
Click to collapse
Some of us went back to B02 to obtain and logcat it but till now no sign of life of the B04. Previous ones, I grabbed within a few minutes....so a bit weird this one doesn't show up...
Keep you updated when it does.
Why do you have to go back to B02?
RobboW said:
Why do you have to go back to B02?
Click to expand...
Click to collapse
The update is being rolled out for the German rom first, that's the 02.
03 is Russian
https://www.facebook.com/groups/1760229210896622/
svsavic said:
https://www.facebook.com/groups/1760229210896622/
Click to expand...
Click to collapse
Nice to show it to us but just adb logcat it and share the file
so : adb logcat > B04.txt
run and press the download - in your adb folder you can grab the B04.txt where you can find the link
raystef66 said:
Nice to show it to us but just adb logcat it and share the file
so : adb logcat > B04.txt
run and press the download - in your adb folder you can grab the B04.txt where you can find the link
Click to expand...
Click to collapse
@svsavic can also extract the zip by downloading it only but not installing it.
I don't remember the location tho where it gets downloaded to. I think it's either in root directory or inside /cache/fota
FYI, I have checked every single entry for Axon 7(OPEN MARKET) from https://www.ztedevices.com/en/support for all contries and the update is not present on that website.
I'm letting you know to save you from wasting a lot of time (I did it at work )
PS:
I have also tried editing this link to kind of guess the new update location:
https://dleu.ztems.com/zxmdmp/downl...ZTE A2017G/191686/P996A04V1.3.0B13_MR2_SD.zip
no success but maybe someone can explore "brute forcing" the link
hey everything together here you have the official b04 as download:
https://drive.google.com/file/d/10fsM2GKlbG-ZSd7d2HXQCPqO3McBNief/view?usp=drivesdk
Hello, how do you install this kind file ? With ADB ? Thanks
Envoyé de mon ZTE A2017G en utilisant Tapatalk