Let`s emphasize that-- [highlight]THIS IS AN ALPHA, RELEASED FOR YOU TO PLAY WITH AND GET A SENSE OF WHAT`S TO COME. AND SOME THINGS DOESN`T WORK. REALLY. IF YOU ARE EXPECTING ANYTHING CLOSE TO PERFECTION, WALK AWAY FROM YOUR COMPUTER, LOWER YOUR EXPECTATIONS FOR AN HOUR OR SO, THEN COME BACK. MORE EXCITING DISCLAIMERS/WARNINGS IN ALL CAPITAL LETTERS CAN BE FOUND BELOW. READ THEM.[/highlight]
Code:
[B]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/B]
KNOWN BUGS (what doesn't work):
- Modem in 2G mode work incorrect(Network registration don't work with some SIM cards, permanent full signal straight, problem is with audio in calls)
With 3G all is OK, Use this: Settings -> More.. in "wireless&network" category -> Mobile Network -> Preferred Network type -> 3G only
- Some SIM cards may not be recognized as the Lollipop more capricious in this regard.
- Conference Calls
- Some problems with audio codec settings, but generally it should
- After Recovery time to time incorrect capacity of battery
- disabled SELINUX
- Camera key don't start camera app
- TV out removed, because it is not working yet
- many custom features from omni is still not merged
UPDATE from OMNI 5.1.1 from 27.12.2015 to 03.06.2026
ATTENTION! Since version 27.12.15 and ending 06.03.2016 F2FS used file system. Therefore, when flash on earlier versions and later, you need to follow the instructions from scratch. Also use these "start" kernels. This will remove your current rom and files.
f2fs "start" kernel is here: s8500, s8530
ROOT
Omni is without root support from default
To activate root flash zip via Recovery UPDATE-SuperSU-v2.46
Downloads
GApps: Download
Installation
Bada 2.0 is required
Warning! It will remove Bada!
Download BOOTFILES, Kernel and FOTA for your device:
for 8500:
BOOTFILES: https://yadi.sk/d/KhxqKyg4bP2nu
"start" kernel: https://yadi.sk/d/ilhyKTaEfTo6L
FOTA: https://yadi.sk/d/OtpVoaXpfNggE
for 8530
BOOTFILES: https://yadi.sk/d/cBPD41VEbP2od
"start" https://yadi.sk/d/wVGzUA96fGW55
FOTA: https://yadi.sk/d/-WnbHbFHfNgZK
Flash BOOTFILES, "start" kernel and FOTA using Multiloader.
After reboot it will open android recovery
Advanced -> Terminal Command -> Select -> Type sh partition.sh -> press Enter"
Wait before on screen you will see "Partitions had been prepared"
Back -> Back -> Back -> Reboot -> Recovery -> Swipe to Reboot
Mount -> Enable MTP (if you see disable MTP - it is already activated) on this step PC can ask to install driver, use Android MTP driver
Copy Zip with ROM to Internal Storage or Sdcard -> Disable MTP -> Back
Install -> choose zip with ROM(mount point /sdcard for Internal storage and /external_sd for SD card) -> Swipe to Confirm Flash
Wait for flashing (about 10 min) -> Reboot System
First start take about 10-15 min, be patient.
Enjoy OMNI!
HOW TO UNINSTALL
Just reflash bada via Multiloader
CHANGELOG:
14.02.2017 https://yadi.sk/d/BdsM-5VO3E5FS9
- Omni sources 14.02.2017
- Fix issue with not working partition.sh
11.02.2017 https://yadi.sk/d/yJaeiEZt3DvPAH
- Omni sources 11.02.2017
- Big update kernel from Coldwindofnowhere
Added CMA. Now, it is stable. This option allows you to have more available RAM as in BigMem.
Big thank's for Coldwindofnowhere and xc-racer99
- Update power management
- Added SQL optimization
- Added some RIL, ART tweaks
- Feedback from testers increased search speed of GPS satellites
- ROM compiled with Uber Toolchains 4.8 and 4.9 kernel, with the addition of optimizations ArchiDroid
arm-linux-androideabi-4.8
arm-eabi-4.9
11.01.2017 https://yadi.sk/d/FB2yJPyz38Ssx4
- Omni sources 11.01.2017
- Update kernel from Coldwindofnowhere
- Reworked RAM management and return to the ext4 file system to increase space and reduce lag
- New power management chipset and reduced display voltage
03.06.2016 https://yadi.sk/d/wFB7zDA0sCweM
- Omni sources 02.06.2016
- Small changes on kernel. Disabled volume tweaks.
- Small changes on RAM managment
- Set zRam zise to 128 Mb
09.05.2016 https://yadi.sk/d/YUx6MYyBraaUt
- Omni sources 09.05.2016
- Reworked ART parameters
- Disable the Battery Life Extender and Fast charging (not quite work correctly)
- Reduced zRam size to 96 Mb
- Added the latest fixes for GPS from Volk204
- Improved deep sleep the device
- Enabled hardware UI acceleration
- Some tweaks and fixes for RIL from Alberto96 and fire855
- Added settings for the stability of receiving 3G (experimental)
- Set the correct values of sound in the advanced settings
- Fixed lag after the call
- Fixed rewind the video in the player
- Big update kernel with latest changes from @Coldwindofnowhere https://github.com/Coldwindofnowhere/android_kernel_samsung_aries/tree/android-5.1
14.01.2016 https://yadi.sk/d/MeqfNujemzK7J
- Omni sources 14.01.2016
- Added porting applications to SD-card with support for memory selection
- Added some options ART from aries
- Added Bigmem support in Advanced settings
with default settings we have 270 mb RAM with working 720p video recording
with Bigmem we have 283 mb RAM without working 720p video recording(as was by default in previous versions)
with Max RAM we have 315 mb RAM and camera, video playback and torch is not working at all
- New features in the kernel : Battery Life Extender, dynamic synchronization of files , dynamic control and fast charging . All of this can be found in Settings - Performance
- Added optimization zRam swap and support for the exFAT file system
- Added new planners SIO plus and BFQ, and new TCP algorithms
- Changed CPU frequency : min = 200 MHz , max = 1200MHz . Max can be reduced to 1000 MHz for energy saving
- Also enabled boost for incall volume in Advanced Settings
- Big kernel update from https://github.com/Coldwindofnowhere/android_kernel_samsung_aries/tree/android-5.1
Big thanks to @Coldwindofnowhere
27.12.2015 https://yadi.sk/d/tyEMtPVHmXAVD
- Omni sources 27.12.2015
- Switch to f2fs file system (system partition increased by 100 MB to install GApps on a new file system)
- Minor optimization of ART and other kernel optimization for speed and stability
22.12.2015 https://yadi.sk/d/faohzx6CmRCRH
- Omni sources 22.12.2015
- The camera can shoot 1280*720 ( -10 MB of available RAM)
- Added new Governors and I/O planners to the kernel
- Changed minimum screen voltage ( 3.0V was - became 2.8V )
- Other kernel optimization for speed and stability
- Added support for TRIM
- Disabled menu button on the lock screen
14.12.2015 https://yadi.sk/d/NTt8Y6zymFAYu
- First release
THANKS TO
Special thanks to volk204 for their help to build this project.
Thanks to Alberto96, Oleg_k, mijoma, nbates66, anghelyi, mikegapinski, hunktb, autra, Tigrouzen, Benzox, fire855 and many others.
OMNI team for base ROM
Pawitp, kasper_h and all other aries developers
Paulk and Replicant project for good base for bada-modem RIL
sooti & Coldwindofnowhere for kernel and rom patches (Galaxy S I9000)
and many other who help us.
XDA:DevDB Information
[ROM][NAND|S85xx] OmniRom 5.1.1 Lollipop, ROM for the Samsung Bada OS
Contributors
djkoloda, volk204
Source Code: https://github.com/AMD-Grifon
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: OmniRom
Version Information
Status: Abandoned
Created 2016-04-17
Last Updated 2020-09-06
Good job bro.
Can u post some screenshot?
3. Advanced -> Terminal Command -> Select -> write sh partition.sh, press Enter
Thang Trinh said:
Good job bro.
Can u post some screenshot?
Click to expand...
Click to collapse
Thank`s! Screens will later.
@djkoloda When can we expect an update? Your ROM is awesome. Thanks a lot dear friend.
docamr said:
@djkoloda When can we expect an update? Your ROM is awesome. Thanks a lot dear friend.
Click to expand...
Click to collapse
@docamr Thank you for your kind words. The update will be today or tomorrow if there is no technical problems.
Before I publish the release, I have to check it thoroughly. So it will have to wait a little longer.
Take your time to polish your rom. If you need help for testing purpose you can count on me
barbe31 said:
Take your time to polish your rom. If you need help for testing purpose you can count on me
Click to expand...
Click to collapse
Thanks. I sent you a PM the build for the tests.
Please Update the ROM @djkolada
Dear @djkoloda
Please update the ROM bro. I am waiting eagerly.
docamr said:
Dear @djkoloda
Please update the ROM bro. I am waiting eagerly.
Click to expand...
Click to collapse
I finished the test and tomorrow will post an update. If there are any problems - write, so how on s8500 and s8530 results may vary and I can not detect all bugs.
Waiting to download and test update today.
djkoloda said:
I finished the test and tomorrow will post an update. If there are any problems - write, so how on s8500 and s8530 results may vary and I can not detect all bugs.
Click to expand...
Click to collapse
Please give us update today. I will test and give you feedback. Thank you djkoloda :good:
docamr said:
Please give us update today. I will test and give you feedback. Thank you djkoloda :good:
Click to expand...
Click to collapse
Given my "perfect" online, the build can push at the night ...
djkoloda said:
Given my "perfect" online, the build can push at the night ...
Click to expand...
Click to collapse
Bro can modified device tree omni to run on cm?
thinhx2 said:
Bro can modified device tree omni to run on cm?
Click to expand...
Click to collapse
In principle, not so difficult, but will take enough time for this.
djkoloda said:
In principle, not so difficult, but will take enough time for this.
Click to expand...
Click to collapse
Yes,wait bro build cm13
the update is delayed , OP busy at work, and then holidays.
Rom is finally ready! Enjoy!)) If there will be any problems with the battery drain, then send reports.
https://yadi.sk/d/mTSgRb2krUoGK
gapps
Hi,
looks good, what about some minimal gapps?
@djkoloda : good job. Couldn't try the version last week. Really faster than before. Now we can use it normally.
I tried to install pico gapps but it's insanely slow.
I will perform much deeper test but it is quite good a version.
Related
** Note: This kernel is end-of-life and will no more be maintained. There will be no LineageOS 15.1 or newer kernel be available anymore **
Hi Guys!
Thanks to one of my coworker at work which had no further usage for his Note 8 GT-N5110 i had recently the possibility to call it my own! I was very happy about that but what i instantly missed after powering on the device for the first time was the great boeffla kernel which runs very well on my S3 for quite some time now. So i decided to "route" some spare time into porting the boeffla kernel for n801x devices to n51x0 devices. After a „couple of days“ and after fighting around with git, merging things and stuff i can enjoy now the power of boeffla on this device too! Finally i want to share this kernel with the ones who maybe missed boeffla on a Note 8 too and of course with all others which maybe want to give it a try.. As it is pretty much complete and i didn't want to reinventing the wheel i did (in agreement with Lord Boeffla!) a shameless copy of his text from the n8x0 thread and changed the relevant parts for this version. It is and it should stay a Boeffla Kernel so i think it's not that “blasphemic” if i copy the Lord himself. btw. all credits to him!!
This is the thread about the ported version of the Boeffla-Kernel for Galaxy Note 8 n51x0 devices
Some of you might know Lord Boefflas kernel already from the Galaxy S3 area.
If you want to learn more about the kernel, it's features and how to configure what, I would recommend you to visit the Galaxy S3 thread of the kernel.
Notes:
This kernel (provided in separate images) should work on the following devices:
GT-N5110 (Wifi only), GT-N5100 (G3 modem) and GT-N5120 (G4/LTE modem) Only GT-N5110 versions are tested by me as i have no possibility to test the others! So feedback about how the kernel is working on a GT-N5100 and GT-N5120 would be highly appreciated, thx!
The kernel images are only for Samsung based Jelly Bean (Android 4.2.2) or Kit Kat (Android 4.4.2) roms!!! Do not install it on CM or AOSP based roms!!!
Kernel versions 1.x are only for Samsung based Jelly Bean 4.2.2 roms!!!
Kernel versions 2.x are only for Samsung based Kit Kat 4.4.2 roms!!!
Custom Roms:
This Kernel is not compatible with the yNote ROM because of modifications related to init process and removing SELinux!! But it should work for example with stock based custom roms like civatos CivZ roms!
WARNING: Be sure that u flash the right kernel for the right device !! Images are named accordingly so double check that u use the right one! Flashing a wrong version may brick your device !!
If you have questions to settings, presets, others configuration and wanna share your configuration, head over to the unofficial Boeffla-Config App Config sharing thread: http://forum.xda-developers.com/show....php?t=2621308
Support
First read the FAQ section on the Homepage (offline, project EOL) !!!
Click here (offline, project EOL) to learn about all possible kernel settings in the config app.
Click here (offline, project EOL) to learn about using the config app.
I will refuse to give support if you do any undervolting and experience freezes or hot reboots.
Change logs
(you can also access them directly in Boeffla-Config V2 by pressing menu and selecting "change log...")
Features
* To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from here: DOWNLOAD (offline, project EOL)
* Upstreamed to Linux 3.0.101 (www.kernel.org)
* Based on Samsung source code GT-N5110_JB_Opensource_Update2/GT-N5110_KK_Opensource.zip and current CM12.x sources
* Initramfs from XXCMK1 (for all JB builds) stock kernels
* Initramfs from XXDNI2 (for KK n5110 builds) stock kernel
* Initramfs from XXDNH3 (for KK n5120 builds) stock kernel
* Initramfs from XXDNL5 (for KK n5100 builds) stock kernel
* Initramfs from official CyanogenMod roms for all CM versions (in "pre-anykernel" images)
* CPU under/overclocking to from 100 Mhz to 1920 MHz
* CPU undervolting interface
* GPU frequencies configurable (underclocking, overclocking up to 700 MHz)
* GPU voltages configurable (undervolting, overvolting)
* Configurable charger rate for AC and USB (default increased to 1100 mA for ac charging)
* Charge info display support
* Configurable zRam
* Configurable touch boost frequency
* Configurable early suspend time (for screen off animations, 100ms default)
* Boeffla-Sound engine V1.6.7 to unleash the power of the audio hub wm1811
* Additional governors: ZZMoove 1.0 beta8, pegasusqplus,smartassv2, intelliactive, lulzactiveq and wheatley
* Governor profiles for pegasusq, pegasusqplus and zzmoove for performance, battery saving etc.
* Additional schedulers: ROW, ZEN, BFQ (v7r8) and SIO
* Schedulers configurable separate for internal and external SD memory
* Hardcore speedmod sharpness fix implemented (default is off)
* SD card read ahead buffer configurable separate for internal and external SD memory (default increased to 256 kB)
* Ext4 File system tweaks (default to on, can be disabled)
* System Tweaks predefined supported (default is off)
* WIFI Multicast filter for better battery life
* WIFI wakelock times reduction
* Proportional rate reduction for TCP
* TCP congestion changed from Cubic to Westwood
* Wifi mac address change support
* Dynamic fsync 1.2 implemented
* Timeout for external SD card changed to improve handling of crappy SD cards
* Custom boot animation support
* Swap supported (but not recommended, use zRam instead)
* init.d support (in /system/etc/init.d - set correct permissions! No support for Zipalign scripts for good reasons!)
* NTFS (read-only access only!) compiled as a module
* CIFS compiled as a module
* NFS compiled as a module
* XBox controller support as module
* USB OTG Ethernet (Asix) support as module
* exFat support switchable (switch it off if you do not need it)
* Battery monitor wakelocks reduced
* Kernel can root if required (create file "autoroot" on internal sd and reboot)
* Android logger can be disabled
* Kernel logging can be disabled
* Disabled various debug logs and traces
* Frandom compiled as a module (for mods like Crossbreeder)
* Automatic EFS backup to external (priority) or internal SD Card (fallback)
* Kernel initialisation log file (with history of 3 log files)
* Emergency reset script automatically placed into /boeffla-kernel-data folder of your internal memory
* Compatibility to common standard apps (Voltage Control, SetCPU, System tuner etc.)
* Compiled with Google arm 4.8 toolchain
* Internal kernel busybox version 1.24.1
* Added support for broken m5c73m3 camera firmware
* Fixed non-working MDNIE negative mode (change in v2.x for KK only)
* WiFi working on JB bootloader! (related to v2.x for KK only)
* Support for external USB web cams enabled
* Mali driver updated to r3p2 rel4 (related to v2.x for KK and all CM12.x, CM13.x, LOS14.1)
in addition added by me ZaneZam (partially taken from civatos SphereEngine and SphereKat projects – thx and credits to him!):
* Configurable touch to wake with S-Pen Support (JB+KK+CM12.x+CM13.x+LOS14.1)
* Implemented double-tap-to-wake (aka knockon - this is NOT how the LG G2 works, it just replaces
the single tap in existing touch wake by a double tap) (JB+KK+CM12.x+CM13.x+LOS14.1)
* Strip the Wireless modules of debugging for size (JB+KK+CM12.x+CM13.x+LOS14.1)
* Brought back Triangle Away Support (JB+KK)
* Added intelligent writeback (JB+KK+CM12.x+CM13.x+LOS14.1)
* Update battery driver to work correctly on JB bootloader (fixed LPM mode - change in v2.x for KK only and might not work on every system!)
* SELinux included full compatibility and set to enforcing like in stock roms as default (change in v2.x for KK and all CM12.x+CM13.x+LOS14.1)
* Mobicore included (change in v2.x for KK only)
* Added new GPU control interface (5 frequencies and voltages) for new mali drivers (change in v2.x for KK+CM12.x+CM13.x+LOS14.1 only)
* Added support for 'fun with resistors' (http://forum.xda-developers.com/showthread.php?t=820275) (JB+KK+CM12.x+CM13.x+LOS14.1)
* Added missing Samsung SideSync USB Gadget (JB+KK+CM12.x+CM13.x+LOS14.1)
* Added Support for USB keyboard app (CM12.1+CM13.x+LOS14.1)
* Added Intelli Plug and use that instead of native kernel hotplug support for legacy governors (JB+KK+CM12.x+CM13.x+LOS14.1)
(=Hotplug support for all non-hotplug-able governors via included intelliplug v1.6 and this will be enabled when switching to such a governor)
Special Note 8 Info:
* S-Pen Alignment fix included (By original JB Samsung/CM Sources and also added to KK Sources)
* Memory Leak fixes included (By original JB+KK Samsung and CM Sources)
* Added Security fix CVE-2013-6282 (CM12.1)
* Added Security fix CVE-2015-3636 (CM12.1)
Download
For all information and downloads (stable AND testing versions), visit the Boeffla-Kernel homepage:
www.boeffla.de (offline, project EOL)
want to live on the edge?
checkout Unoffical Boeffla Kernel Linaro Builds
Lord Boefflas Objective
The objective of this kernel is to have a kernel for daily use. It does not aim for best battery life, or best smoothness or best benchmark scores. It aims more for a good mix of all, not sacrificing stability and functionality in the end.
And - most important: It aims to stay quite close to stock !!!
I will, also in future, only add features that make sense to me personally as well and are not against my initial objectives. You can always raise your wishes and requests, however there is absolutely no guarantee it will be implemented.
Quote Lord Boeffla:
This said, I will definitely NEVER implement:
dual boot (I do not need it)
f2fs - it is known to cause various issues and compatibility problems
anything that requires upstreaming of kernel parts to a higher kernel major version
So do not even ask for it. Everything else I am happy to check and decide.
Click to expand...
Click to collapse
So i (ZaneZam) won't do that either but all the things Lord Boeffla decides to implement in the future will of course find their way into this kernel as long as it is possible to implement them plus/minus some little things i might find useful for the Note 8 devices but at the end always respecting Lord Boefflas Objective!
Compatibility
To reiterate it again: This kernel is only for Samsung based Jelly Bean (Android 4.2.2) and Samsung based Kit Kat (Android 4.4.2/GT-N5100 4.4.4) firmwares. Since 26.04.15 there are also CM12.x,CM13.x,LOS14.1 versions available. It is not designed to run on AOSP based roms!
SPECIAL NOTE ABOUT NEWER STOCK ROMS: to be able to use the KitKat kernel builds with newer roms like XXDNH2 or XXDNH3 stock roms or based ones u will need to patch your rom beforehand. due to mali API changes in these roms booting with custom kernels isn't possible. so you can now checkout and install civatos fix HERE (many thx and credits to him!) after patching the rom the kernel should boot fine! <-- 10.04.15 since kernel version 2.2 obsolete as it has been "fixed" in the kernel itself. nonetheless if u still face issues with newer roms then u can use civatos method in addition but for now it's not needed to boot the kernel on newer roms.
Kit Kat 4.4.4:
Since version 2.1 stable this kernel is compatible with the XXDNL5 rom for GT-N5100 devices.
CM12.x:
Since 26.04.2015 there are also CM12.0 and CM12.1 versions for GT-N5100 and GT-N5110 devices available. these are compatible with offical CyanogenMod 12.x roms and based ones.
CM13.x:
Since 17.04.2016 there are also CM13.0 versions for GT-N5100 and GT-N5110 devices available. these are compatible with offical CyanogenMod 13.0 roms and based ones.
Since 01.05.2016 there are also CM13.0 versions for GT-N5120 devices available. these are compatible with offical CyanogenMod 13.0 roms and based ones.
LineageOS 14.1:
Since 13.01.2017 there are also LineageOS/CM14.1 versions for GT-N5100, GT-N5110 and GT-N5120 devices available. these are compatible with offical LineageOS 14.1 roms and based ones.
Note: You need at least version 2.4.19 of Boeffla-Config V2 to allow all functionalities to be available.
Configuration of the kernel
To tweak and configure the kernel, manually load and install the app "Boeffla-Config V2" from here: DOWNLOAD (offline, project EOL)
Donation
If you like my work, feel free to donate via XDA developers: Donation-Link or via link on Homepage (offline, project EOL)
Or, just purchase the donation version of the Boeffla-Config app, which also gives you some extra features.
Yeah go on folks donate for this great Dev!! :good:
Source code
All sources can be found in my Github repository: https://github.com/zanezam
Credits to developers
Of course, I had never been able to create all that by my own. So I want to give credits to the really good developers around, that have given me all the inspiration and from which I cherry picked lots of the implemented functionalities:
* Andip71
* Yank555
* Hardcore
* Chainfire
* DerTeufel
* Harunjo
* AndreiLux
* Netarchy
* Gokhanmoral
* Simone201
* Supercurio
* Mialwe
* Entropy512
* Faux123
* civato
... I just hope I did not forget someone. If so, please let me know and I will add you of course.
Thanks to all of you for your great work !!!
And special thanks from me to my friend Andi for letting this kernel-port exist „under his hood“ by providing it on his homepage and for supporting it in his Config App! Appreciate that much!!
Disclaimer
*** As always - Flash on our own risk! ***
Make sure you flash the correct version depending on your firmware version!
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in CWM recovery and safely store your personal data before you flash a new kernel.
One last important note from me ZaneZam:
This is a contribution to the Boeffla Kernel project and not my own project! This port was made in agreement with Lord Boeffla but not by himself! I will support this ported version as good as i can, Lord Boeffla will not as he doesn't support versions for devices he doesn't own! So please if you have device specific questions ask them here and not in any other boeffla kernel thread, thanks!
Cheers and now enjoy the power of Boeffla on the Note 8!
ZaneZam
reserved 1
reserved 2
reserved 3
Give this guy his cookie, can't wait till Samsung releases the KK kernel source to try this baby out.
yeah i'm waiting too to be able to start from scratch
Been waiting for this thank you.....tested kernel on civatos rom, works great no issues at all.battery life and performance are great. Boffella sound is awesome and the boffella config gives a little more control over audio than just boffella sound. Would love to see a aosp kernel with these features since no current 4.4.2 aosp or cm kernels have boffella sound working. I downgraded from 4.4.2 for this kernel and happy I did.... Thanks
Have flashed it on my N5100 running latest X-Note ROM.
After first flash, my screen was flickering.
Then I did cache and dalvik wipe and flashed again.
Now no flickering any more, but my GSM doesn't work any more.
So back to civz kernel.
Gesendet von meinem GT-N5100
blowy666 said:
Have flashed it on my N5100 running latest X-Note ROM.
After first flash, my screen was flickering.
Then I did cache and dalvik wipe and flashed again.
Now no flickering any more, but my GSM doesn't work any more.
So back to civz kernel.
Gesendet von meinem GT-N5100
Click to expand...
Click to collapse
first of all thx for your braveness *gg* and thx for the report!
as said unfortunately i cannot test versions other then the N5110, so i rely on your reports.
but maybe i can pinpoint the problem with your help at least if you still are willing to help,
that would be great but also isn't a problem if u refuse
another one with such a problem on GT-N5100 or GT-N5120?
ZaneZam said:
first of all thx for your braveness *gg* and thx for the report!
as said unfortunately i cannot test versions other then the N5110, so i rely on your reports.
but maybe i can pinpoint the problem with your help at least if you still are willing to help,
that would be great but also isn't a problem if u refuse
another one with such a problem on GT-N5100 or GT-N5120?
Click to expand...
Click to collapse
One thing I noticed that is very important to me is docking mode is no longer supported with this kernel. Switch to civatos kernel it works again.dock mode supports USB host charging and HDMI at the same time all u need to do is place a 65k resistor between Id pin and ground on ur USB host cable.....very important to me since tablet is used in my car as a head unit... I'd appreciate any help.Maybe s3 uses a different resistance?
b3ltazar said:
One thing I noticed that is very important to me is docking mode is no longer supported with this kernel. Switch to civatos kernel it works again.dock mode supports USB host charging and HDMI at the same time all u need to do is place a 65k resistor between Id pin and ground on ur USB host cable.....very important to me since tablet is used in my car as a head unit... I'd appreciate any help.Maybe s3 uses a different resistance?
Click to expand...
Click to collapse
actually to be as near as possible to boeffla kernel I didn't activate it in config but will check that for u and maybe we have an beta 2 soon!
I appreciate that . I really want to get into kernel dev. I built a few windows 7 moded os. But seems u need Linux experience I only have some backtrack experience. Thanks for the reply. I'm always open to testing
b3ltazar said:
Been waiting for this thank you.....tested kernel on civatos rom, works great no issues at all.battery life and performance are great. Boffella sound is awesome and the boffella config gives a little more control over audio than just boffella sound. Would love to see a aosp kernel with these features since no current 4.4.2 aosp or cm kernels have boffella sound working. I downgraded from 4.4.2 for this kernel and happy I did.... Thanks
Click to expand...
Click to collapse
So you know my JB kernel also support Boeflla.
Second I'm test building Kitkat kernel.
Already working is:
Exfat
Cifs
Wifi
Cpu OC up to 1.92GHz and UC to 100MHz
CPU voltage control
S_Pen alignment fixed
RTL28.. USB modem support
Various Fixes in memory leaks
DynamicFsync
ZZmoove & lulzactive governor added
row, vr, sio shedulers added
and all of this without samsung source thanks to a help full eye of one of my users
More to come...........public release?
civato said:
So you know my JB kernel also support Boeflla.
Second I'm test building Kitkat kernel.
Already working is:
Exfat
Cifs
Wifi
Cpu OC up to 1.92GHz and UC to 100MHz
CPU voltage control
S_Pen alignment fixed
RTL28.. USB modem support
Various Fixes in memory leaks
DynamicFsync
ZZmoove & lulzactive governor added
row, vr, sio shedulers added
and all of this without samsung source thanks to a help full eye of one of my users
More to come...........public release?
Click to expand...
Click to collapse
thx for the info civato, i think he knows that already as he used/uses your kernel btw i was going to contact you about your JB sources as i missed an updated repo in your github account, or am i blind? could u please give me some hint? and here again: thx for all your work! :good:
[*]and all of this without samsung source thanks to a help full eye of one of my users
Click to expand...
Click to collapse
-> very interesting!
ZaneZam said:
thx for the info civato, i think he knows that already as he used/uses your kernel btw i was going to contact you about your JB sources as i missed an updated repo in your github account, or am i blind? could u please give me some hint? and here again: thx for all your work! :good:
-> very interesting!
Click to expand...
Click to collapse
Yep sorry I noticed that 4.2.2 kernel source hasn't been updated, just no time.
When I finish my KitKat kernel I will upload the source to github.
Will try to do that this weekend.
yeah i know that "time thingy" very well! thx looking forward to your update.
ZaneZam said:
yeah i know that "time thingy" very well! thx looking forward to your update.
Click to expand...
Click to collapse
Still running this kernel working good. Battery life is amazing. Hopefully u can get docking mode figured out when u have time.
I'm surprised there aren't more people interested in this kernel. Give it a try with civs 4.2.2 build u won't regret it.
New Version v1.0 beta2 available!
Hi Guys,
a new beta is available!
as usual you can get it HERE or via Load & Flash functionality in Boeffla Config App
Changelog:
Version 1.0-beta2
22.06.2014
Update to zzmoove 0.9-beta2 (ZaneZam)
Speedup late resume for faster wakeup of the device (credits to Yank555)
A few performance tweaks (Lord Boeffla)
Fix n_tty_write crash when echoing in raw mode (Lord Boeffla)
Update su to version 2.00 (Lord Boeffla)
Update to latest changes in Boeffla ramfs (ZaneZam)
Fix compatibility issues by changing Samsung ramfs to the original n5100/n5120
(XXCMK1) rom versions (ZaneZam for n5100 and n5120 builds)
Enable audio/smart dock mode for MAX77693 chip to support 'fun with resistors'
(http://forum.xda-developers.com/showthread.php?t=820275) (ZaneZam)
enjoy!
ZaneZam said:
Hi Guys,
a new beta is available!
as usual you can get it HERE or via Load & Flash functionality in Boeffla Config App
Changelog:
Version 1.0-beta2
22.06.2014
Update to zzmoove 0.9-beta2 (ZaneZam)
Speedup late resume for faster wakeup of the device (credits to Yank555)
A few performance tweaks (Lord Boeffla)
Fix n_tty_write crash when echoing in raw mode (Lord Boeffla)
Update su to version 2.00 (Lord Boeffla)
Update to latest changes in Boeffla ramfs (ZaneZam)
Fix compatibility issues by changing Samsung ramfs to the original n5100/n5120
(XXCMK1) rom versions (ZaneZam for n5100 and n5120 builds)
Enable audio/smart dock mode for MAX77693 chip to support 'fun with resistors'
(http://forum.xda-developers.com/showthread.php?t=820275) (ZaneZam)
enjoy!
Click to expand...
Click to collapse
Just to make sure, this still doesn't support TW KitKat Roms? I read in the OP that is for jellybean roms.
Unofficial CyanogenMod 12.1 for Samsung Galaxy Tab 3 10.1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, ...
* You flash this at your own risks
*/
About CM
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Important information
You need a recent TWRP version to flash this ROM.
Installation
First time installing or coming from another ROM
Copy ROM to SDCard
Copy Houdini to SDCard
Copy GApps to SDCard
Boot into recovery
Backup EFS partition
Wipe -> Advanced Wipe -> Dalvik Cache + System + Cache + Data
Install ROM
Install Houdini
Install GApps
Reboot
First start takes a long time
Upgrading from earlier version of CyanogenMod 12.1
Copy ROM to SDCard
Boot into recovery
Install ROM
Reboot
[OPTIONAL] Converting filesystem to F2FS (thanks @michiil)
The ROM has F2FS support. You may want to use it instead of the default (EXT4).
This will delete ALL files/data from your tab.
What you will need: A working PC and a working USB cable.
Install the most recent Recovery
Download the most recent Recovery from the second post. Flash the zip file in recovery. Back in the main menu press Reboot > Recovery
Format Data and Cache to F2FS
Wipe > choose Cache > repair or change file system > change file system > F2FS > Swipe to Confirm
Go back and repeat the same steps with Data. I got some error messages when formatting Data but they don't seem to be a problem.
Back in the main menu press Reboot > Recovery
Install Rom + Houdini + Gapps
Connect your tab to your PC and copy the zip files on the tab.
Flash the files, reboot and enjoy :good:
How to get back to EXT4
You will again loose all files/data on the tab.
Just repeat Step 2 but use EXT4 instead of F2FS.
What's working
RIL for P5200 (data, SMS/MMS, calls)
GPS
2D/3D acceleration
HW video encoding/decoding
Screen cast (miracast)
Sound
InfraRed
Camera
Wifi
Bluetooth
Sensors (and automatic brightness)
Smart cover lock/unlock
Multiuser
SDCard, USB OTG
Tethering (USB, Bluetooth, Wifi)
F2FS and exFAT
What's not working
Chromecast
RIL (for P5220)
MHL
Secure videos/DRM (Widevine, Google Play Movies...)
HW audio decoding
SELinux (disabled)
You tell me
How to root
Go to 'Settings/About tablet'
Tap 7 times on 'Build number'
Go back
Go to 'Developer options'
Tap on 'Root access'
Select 'Apps only' ('Apps and ADB' if you plan to use it in adb shell)
How to help
When something is not working correctly, in addition to common informations, I may ask you to provide logs. There are different kind of logs and it's not always easy to get all of them. For this, you can use SysLog (available on F-Droid or Google Play.
There is currently a bug in the app. Download it from AndroidFileHost. Use this patch if you want to compile it yourself:
Code:
diff --git a/app/src/main/java/com/tortel/syslog/utils/Utils.java b/app/src/main/java/com/tortel/syslog/utils/Utils.java
index 40d41b8..80ae55c 100644
--- a/app/src/main/java/com/tortel/syslog/utils/Utils.java
+++ b/app/src/main/java/com/tortel/syslog/utils/Utils.java
@@ -144,7 +144,7 @@ public class Utils {
Log.v(TAG, "Path: "+path);
//Make the directory
- if(!outPath.mkdirs() && !outPath.isDirectory()){
+ if(!outPath.mkdirs() || !outPath.isDirectory()){
throw new CreateFolderException();
}
Make sure to root device before using this app.
To get the logs:
Start SysLog
Click on 'TAKE LOG'
Once log is taken, SysLog will try to share the resulting file, just cancel
Send me the file /sdcard/SysLog/[YYYY-MM-DD_HH.mm]/[YYYY-MM-DD_HH.mm].zip
If you left 'Scrub potentially personal information from the logs' checked, you should be safe.
ROM sources
Kernel
https://github.com/nels83/android_kernel_samsung_santos10/tree/cm-12.1
Device trees
https://github.com/nels83/android_device_samsung_p5200/tree/cm-12.1
https://github.com/nels83/android_device_samsung_p5210/tree/cm-12.1
https://github.com/nels83/android_device_samsung_p5220/tree/cm-12.1
Local manifest
https://github.com/nels83/android_device_samsung_p5200/wiki/Local-manifest
CM12.1 Patches (if you just need these)
https://gist.github.com/nels83/bbec9f80478fcb679412
Credits
Angel_666 , moonbutt74 and Restl3ss for starting the work on this device
Android-Andi for his device tree
Deltadroid for his GApps package
All testers of the "signup" thread
CyanogenMod and Google for Android
XDA
AndroidFileHost
XDA:DevDB Information
CyanogenMod 12.1 for GT-P52XX, ROM for the Samsung Galaxy Tab 3 10.1
Contributors
nels83
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-05-05
Last Updated 2016-05-29
Downloads
ROM
ROM - Beta 4 (20160529)
Galaxy Tab 3 10.1 3G : GT-P5200 (MD5)
Galaxy Tab 3 10.1 Wifi : GT-P5210 (MD5)
Galaxy Tab 3 10.1 LTE : GT-P5220 (MD5)
You can find old versions on AndroidFileHost. Version code is in file description.
Houdini (20150521)
Houdini for Android 5.0 (MD5)
GApps
See Open Gapps, select Platform x86 and Android 5.1.
TWRP
See TWRP thread.
Other
Flash player (11.1.112.60)
Flash player for x86
Note
There is currently a bug with HW video decoding/encoding: you can't have both. By default, the ROM provides HW video encoding but partial HW video decoding.
If you want full HW video decoding, you can flash hw_decode.zip (you will however loose HW video encoding). Fixed in alpha 11.
A bug appeared in Alpha 13 causing voice calls (in P5200) to be muted. It will be fixed in Beta 2. In the meantime, you can flash audio_test3.zip after flashing the ROM. Fixed in beta 2.
Changes
Changelog
Beta 4 (20160529)
- CM update
Old changes
Beta 3 (20160210)
- CM update
- Fixed GPS
- Updated F2FS driver
Beta 2 (20151120)
- CM update (stable/cm-12.1-YOG7D)
- Fixed audio calls
- Speaker by default for audio calls
- Fixed video artifacts
Beta 1 (20151027)
- CM update
- Better hardware buttons responsiveness
- Enabled wifi hotspot for GT-P5210
Alpha 15 (20151012)
- CM update
- Button lights are activated only when touching them (thanks to pawitp)
- Reduced boot time (first one and when using encryption)
Alpha 14 (20150922)
- CM update
- Fixed device encryption
- Added HW keystore
- Disabled CABC
- Added stock extSdCard symlink (thanks @HassoNas)
- Reduced boot time by launching MDS service (thanks to Tran Huu Tin)
Alpha 13 (20150902)
- Based on CM 12.1 YOG4 stable branch
- Fixed sensors
- Optimized zram
- Added KeyDisabler
- Added CABC
Alpha 12 (20150806)
- CM Sync
- Fixed voice calls for P5200
- Fixed GPS for P5200/P5220 (still partial support)
- Fixed permissions for interactive governor
- Used proper OmniROM patch for cursor
- Added deadline I/O scheduler
- Reverted to CFQ I/O scheduler by default
- Disabled KSM
Alpha 11 (20150728)
- CM Sync
- Fixed video encoding
- Fixed audio bugs appearing in some games
- Added FIOPS I/O scheduler (enabled by default)
Alpha 10 (20150711)
- CM Sync (Android 5.1.1_r6)
- Fixed USB OTG settings
- Added performance profiles
- Fixed more green bar on some videos
- Fixed reversed volume button
- Reverted power hal
Alpha 9 (20150615)
- CM Sync
- Added Stk and SamsungServiceMode
- Fixed pinch zoom (by CM)
- Set lz4 compression for zram
- Set lzma compression for kernel
- Cleanups / merges
Alpha 8 (20150605)
- CM Sync
- Fixed third party VPN
- Added smart cover support
- Various fixes
Alpha 7 (20150601)
- CM Sync
- Enabled KSM (for real, missed a commit in alpha 6)
- Fixed audio glitches
- Fixed green bar on some videos
- Added F2FS support (needs TWRP 2.8.6.0 V2)
Alpha 6 (20150528)
- CM Sync (Android 5.1.1_r3)
- Enabled KSM and zram
- Forced menu icon (in Firefox for example)
- Fixed home button for secondary users
Alpha 5 (20150520)
- CM Sync
- Fixed screen recording
- Use opensource mixvbp
Alpha 4 (20150517)
- CM Sync
- Adjusted power profile (needs testing)
- Fixed HW video encoding (only from camera, screen recording not working)
- Fixed Wifi direct
- Various config fixes
Alpha 3 (20150510)
- CM Sync
- Fixed wifi tethering
- Fixed mouse cursor
- Fixed show touches in developer options
Alpha 2 (20150508)
- Add P5220 ROM
- Fixed bluetooth PIN and tethering
- Add extra fonts
- H icon for HSPA
- Enable Wifi-Direct for all devices
Alpha 1 (20150505)
- Fixed camera for P5200
- Fixed minimum brightness
- Fixed hardware keys definitions
- Enabled reboot to download
nels83 said:
Changelog
Alpha 1
- Fixed camera for P5200 (hopefully)
- Fixed minimum brightness
- Fixed hardware keys definitions
- Enabled reboot to download
Click to expand...
Click to collapse
Hi! Glad to see a new thread by you!
Just some Thoughts - in "/common-overlay/frameworks/base/core/res/res/xml/power_profile.xml"
Code:
<item name="battery.capacity">2100</item>
maybe 4000?
and
<array name="cpu.speeds">
max value for us is 16000000 and min value is 800000 i think like this:
<array name="cpu.speeds">
<value>800000</value>
<value>933000</value>
<value>1200000</value>
<value>1333000</value>
<value>1600000</value>
</array>
And for Intel platform we need 2 more files: thermal_throttle_config.xml
thermal_sensor_config.xml but i dunno how correctly it will be used by CM frameworks...
P.S. for open\close reaction on case we can try add <bool name="config_lidControlsSleep">true</bool>
Just flashed Alpha1 built for P5200 and camera works now
thx nels83
New bugs:
-otg mouse works, but no cursor
-screencasting not working(my device chromecast)
-show touches in developer options not working
-when I change language, settings crash
---------- Post added at 03:27 PM ---------- Previous post was at 03:03 PM ----------
blits01 said:
New bugs:
-otg mouse works, but no cursor
-screencasting not working(my device chromecast)
-show touches in developer options not working
-when I change language, settings crash
Click to expand...
Click to collapse
+wifi hotspot not working
Is there a way to make the button lights only light up when you touch them and not light up every time you touch the screen?
Sent from my Nexus 5
blits01 said:
New bugs:
-otg mouse works, but no cursor
-screencasting not working(my device chromecast)
-show touches in developer options not working
-when I change language, settings crash
---------- Post added at 03:27 PM ---------- Previous post was at 03:03 PM ----------
+wifi hotspot not working
Click to expand...
Click to collapse
Not working Dialer(do not call)
KingUsman said:
Is there a way to make the button lights only light up when you touch them and not light up every time you touch the screen?
Sent from my Nexus 5
Click to expand...
Click to collapse
+1
Angel_666 said:
Hi! Glad to see a new thread by you!
Just some Thoughts - in "/common-overlay/frameworks/base/core/res/res/xml/power_profile.xml" ...
Click to expand...
Click to collapse
Thanks! Good catch, I never edited this file, just took the one from stock ROM...
Angel_666 said:
And for Intel platform we need 2 more files: thermal_throttle_config.xml
thermal_sensor_config.xml but i dunno how correctly it will be used by CM frameworks...
Click to expand...
Click to collapse
I'll take a look. Thermal management is on my todo list.
Angel_666 said:
P.S. for open\close reaction on case we can try add <bool name="config_lidControlsSleep">true</bool>
Click to expand...
Click to collapse
It won't work, these devices don't have lid
KingUsman said:
Is there a way to make the button lights only light up when you touch them and not light up every time you touch the screen?
Click to expand...
Click to collapse
I don't think so. This would require CyanogenMod changes (if it is even possible).
Thank you for this great ROM.
Is it possible to make the magnetic Sensors work? If i open or close my Bookcover the Display doesn't turn on or off.
blits01 said:
New bugs:
-screencasting not working(my device chromecast)
-otg mouse works, but no cursor
-show touches in developer options not working
Click to expand...
Click to collapse
Thanks for the reports, I'll check this.
blits01 said:
-when I change language, settings crash
Click to expand...
Click to collapse
It seems we are not alone: https://code.google.com/p/android/issues/detail?id=166828 and http://forum.xda-developers.com/showpost.php?p=59934854&postcount=5133
I noticed some bugs concerning fonts, it may be related.
blits01 said:
+wifi hotspot not working
Not working Dialer(do not call)
Click to expand...
Click to collapse
These two are hard to try for me as I don't have a P5200 device (but I will investigate). Maybe @Angel_666 could take a look ?
Holzi001 said:
Thank you for this great ROM.
Is it possible to make the magnetic Sensors work? If i open or close my Bookcover the Display doesn't turn on or off.
Click to expand...
Click to collapse
This function is not included in CyanogenMod (afaik). You can try to calibrate the magnetic sensor and install Magnetic Lock from the Play Store.
Flashed this afternoon and I am loving it so far. Can really tell it's been liberated from TW as performance is vastly superior. Haven't really encountered new bugs or anything. Did try to mess with the magnetic lock apps but with zero success. Is it even possible to bake functionality like this into CM?
Thank you so much for putting this together!! Has breathed a lot of new life into this aging device.
I had honestly given up on the tab 3 10.1 haha (as is obvious by lack of pimpdroid updates), I was about a day away from selling it. Good work my friend
Its really awsome to see something new here i will flash it as soon as i get home.
If you need someone to do some testing just ask me since i have a 5200.
EDIT: goddamn thats smooth. its like a whole new tablet
Thrilled
This is just amazing! I've been looking in the development thread almost every day this year. From the start of April it's been less often and I almost most hope.
So imagine my surprise and joy! It's like a brand newer tablet! Thanks :laugh::good:
nels83 said:
Thanks for the reports, I'll check this.
It seems we are not alone: https://code.google.com/p/android/issues/detail?id=166828 and http://forum.xda-developers.com/showpost.php?p=59934854&postcount=5133
I noticed some bugs concerning fonts, it may be related.
These two are hard to try for me as I don't have a P5200 device (but I will investigate). Maybe @Angel_666 could take a look ?
Click to expand...
Click to collapse
@blits01 can you send\receive sms on your device?
Angel_666 said:
@blits01 can you send\receive sms on your device?
Click to expand...
Click to collapse
Sms and ussd work good
The CyanPop 6.0.1 Project
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Features:
CyanPopOTA
Android 6.0.1_r13
CyanPop bootanimations
All CM features
Compiled with RazorKernel as default kernel
Compiled with UBERTC 4.9.3
Ram bar to recent options
Statusbar clock font size
Second Clock support
Statusbar clock font style
status bar color option
Network traffic indicator
Show CyanPop in flashing
PackageInstaller: Show current & new version
Launcher3
Snapdragon Camera
CyanPopWallpapers
AdAway app prebuilt
About CyanPop and CyanPop maintainers in settings
Advanced Reboot SystemUI
CyanPop Logo in settings
CyanPop is starting
KernelAdiutor prebuilt
MarshMallow logo instead of 'No recent apps'
Update Alarm Files from N5 Factory Image
Update Effects from N5 Nexus Image
Update Dock/Undock Sounds from M Factory Image
Update Notification Sounds from N5 Factory Image
Update Material Ringtones to M from N5 Factory Image
Update VideoRecord & Wireless Charging Sounds to M
Use M Sound for LowBattery
Ensure M Camera Sounds
CyanPop is starting in first boot
LCD density setting
Enable MultiWindow for everyone!
More Battery Saver Mode Options
Enable non-market apps install by default, disable verifier
Allow faster app switching
Update frameworks-res.apk icon to a more appropriate icon
SwipeHelper: Let's cut Max Excape Animation in Half too
Speed Up Long Press Timeout
RazorKernel
Change SQL to improve performance.
Improve scrolling cache
Battery saver enhancements
Dev options enabled by default
wifi tab enabled by default
RazorKernel Features:
Added Darkness governor
Based on linux 3.10.94
LZ4 Compressor module
xz: Optimize Sfck Compression
block: Disable add_random
block: deadline: Optimize for non-rotational
drivers: usb: Use Android device as USB keyboard/mouse
Optimized SLUB memory allocator
Zram
ARM RWSEM algorithm
Enabled pipe flag.
Advanced TCP Congestions
support of exFAT
Overclock to 1.4 Ghz.
Many optimizations
Latest KCAL thanks @savoca
Enabled Conservative
Thermal limit control thanks to @franciscofranco
gpu Oc thanks @neobuddy89
Added BFQ
Lowered VFS cache pressure
Control vibration intensity thanks @Varun Chitre
Added more TCP congestion Algorithms.
And other
.
Governors:
.
Interactive
Conservative
Ondemand
Userspace
PowerSave
Performance
Darkness
.
Schedulers
.
noop
deadline
row
cfq
fiops
Bfq
What's working :
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Video Playback
Audio ( Record and Playback )
Sensors
Flash
Led
Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
8. Flash the gapps.
10. WIPE DALVIK/CACHE
11. Reboot Device.
Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the update zip from recovery.
4. Install the gapps
5. WIPE DALVIK/CACHE
6. Reboot Device.
Download
BasketBuild- basketlink
Changelog
opengapps.org
Credits
Of rom:
RolanDroid: Rom Developer
CyanogenMod
Team CrDroid
Temasek
[*]@PartimusPrime: For his bootanimations
Of Device:
ketut.kumajaya
and others who worked hard to bring the base rom..
Otherhelps:
Sam Fischer (tushar Jain)
Aniruddh Chandratre
And my Beloved Testers
send a pm if i forgot you
Sources
CyanPop Sources
CyanPop Device Sources
Follow CyanPop!
which camera app to use in place of stock...??
Screenshots
saurabh1234 said:
which camera app to use in place of stock...??
Click to expand...
Click to collapse
Uses Snapdragon Camera
Any screenshot available? Many many thanks for your awesome work!
any more bug after camera bro.. .??
Kiran Anto said:
What's not working :
Camera Taking pictures using stock camera .. it freezes
GPS (device only) requires a signal lock from stock to function correctly or this.
Click to expand...
Click to collapse
thanks for this refreshment-rom!
1) guess that gps fix you suggested are adb commands executed in fasboot mode << are there any negative side-effects?
[didn't understand the first method, so i don't even dare to ask about it]
{finally, i got used living without gps using RR}
2) do you think this snapdragon might work? >> any other suggestion - if not?
i know you're investing all your time in "regular" CM 13, but would really appreciate if you don't neglect this one too
Can you tell me what to select in open gapps page, in order to download the correct file?
ARM or ARM64?
Android version 6.0?
Kiran Anto said:
Uses Snapdragon Camera
Click to expand...
Click to collapse
Can you give a link to Snapdragon camera? Does it work completely?
fforward72 said:
Can you tell me what to select in open gapps page, in order to download the correct file?
ARM or ARM64?
Android version 6.0?
Click to expand...
Click to collapse
You have to select ARM(it's for 32 bit systems).
ARM64 is for 64-bit system's.
arc7ful said:
Can you give a link to Snapdragon camera? Does it work completely?
Click to expand...
Click to collapse
its there in the rom...
Kiran Anto said:
its there in the rom...
Click to expand...
Click to collapse
Oh! ok. Does it work properly?
Heating up a lot please fix it.Otherwise its quite smooth.
Oh just saw your kernel thread and Facebook page. Got my answer!
...
@Kiran Anto
I am running this rom for about 24 hours and here is a few bugs i have noticed :
1) The camera bug is the major one.
(The snapdragon camera just takes photos and crashes on shooting videos)
2) Offline charging
(When the phone is switched off and plugged in to the charger the blue icon appears and the whole screen turns blue and starts flickering. You have to power it on to charge properly)
3) GPS
(I locked the gps from stock and then flashed the rom but still it fluctuates about my current location)
4) Random freezes
(The phone sometimes freezes for like 5 minutes and then comes back to normal)
PS : This should help you make this ROM more stable
God of War™ said:
@Kiran Anto
I am running this rom for about 24 hours and here is a few bugs i have noticed :
1) The camera bug is the major one.
(The snapdragon camera just takes photos and crashes on shooting videos)
2) Offline charging
(When the phone is switched off and plugged in to the charger the blue icon appears and the whole screen turns blue and starts flickering. You have to power it on to charge properly)
3) GPS
(I locked the gps from stock and then flashed the rom but still it fluctuates about my current location)
4) Random freezes
(The phone sometimes freezes for like 5 minutes and then comes back to normal)
PS : This should help you make this ROM more stable
Click to expand...
Click to collapse
ill fix it soon.. after newyear. probably. next update would be to fix camera.... imtrying..
and alll other bugs already fixed in my test builds..
Please give me proper link to minimal gapps required aftrr flashing this rom
I'm getting an error of insufficient storage along with the pico installer it is not getting installed.
Please help
Is this ROM still in active development?
@Kiran Anto is this project closed ??
Cyanpop latest version is 5.5
Any plans to update this ??
The Prehistory of UltimateROM
About a month ago I decided to set out to improve the performance of my phone with a more optimized build. I had already begun building OmniROM 5.1.1 with a some set of optimizations based on the work of OptiPop Team, and shortly after some the major issues on Marshmallow on our devices were resolved, this idea to create an ultimatively optimized AOSP-based ROM has born.
Why Should You Use UltimateROM? What makes it different?!
Honestly, I don't necessarily care, how many users or downloads my ROM has. Most importantly, and what I do care about is people liking and enjoying their phone; if you try UltimateROM and you like it, great! I'm glad you enjoy it. If you don't, maybe leave some feedback on how I can improve it, and go try something else in the meantime. If you'd like to know, what I've done that makes this ROM unique, here is a list:
Highly optimized. similar to Linaro(and in many ways, better than), build, resulting in a smoother Android
Compeletely developed in the open, everything I do is right on my GitHub for anybody to use and improve upon.
A unique kernel which attempts to balance features, stability, and of course, performance
Almost the sources, excluding apps, the SystemUI and some more, are based on CyanogenMod ones, which means there are more fixes and support for our legacy devices (even though CyanogenMod itself doesn't really support any devices like our, anyway google doesn't even do that minimal support as CM Team does)
Disabled SELinux. Looking backward on how many issues SELinux was causing and still causing for people that use it on MM, it seems to me a ridiculuos how google promotes and implements it everywhere, without any proof of improving anything rather than making worse.
Current Information
Everything I do with UltimateROM I always test personally on my phone, but anyway...
Code:
#include <disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modifications, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
Please also note that currently I don't test installation with the Gapps. So far installation is only tested as dualboot ROM - though, the uploaded build is an usual one, - please let me know if the uploaded build has issues with booting, even though normally this should not happen.
What's working:
RIL (phone/SMS/3G)
Video (playback & recording)
Audio (playback & recording)
Wi-fi
Bluetooth
Camera (Front and rear)
2D/3D HW Acceleration
USB, MTP, ADB
all native tethers (Wifi/BT/USB)
external storage
What's not
Formatting SDcard as adoptable storage will screw it up (don't format / encrypt)
MTP bug with doubled folders in sdcard root folder
ROM features:
Dark Marshmallow Theme
long volume press to skip track
PA Pie control
SlimRecents / improved AOSP recents
Re-added task manager
Navigation Bar
System UI tuner
expanded desktop
storages are swapped by default
extended reboot menu
customizable button backlight settings
Viper4Android FX
superuser embedded
Download
UltimateROM
Installation
Before installation, make sure that you have enough free space on partition /system. AT LEAST 540 Mb is required for this build if installing WITHOUT any Gapps. If you don't have enough space, follow repartition manual. (at your own responsibility for any kind of possible damage. Be sure to measure twice and cut once!). There is a CWM ReParted zip that was tested by @Culateralligator.
wipe cache
make sure you're using TWRP 2.8.6.0. All the below is only tested on this recovery. Philz is not supported by this ROM and not planned to in the near future. Note that TWRP from the linked topic requires preinstalled chrono kernel.
install ROM first
install latest chrono kernel
install gapps (optional), if you do so, make sure you are not running of space on /system ( about GApps )
Sources:
https://github.com/UltimateROM/android_manifest
Thank Yous
SergeyL - many-many thanks for an initial set of patches, device tree and TWRP 3.0.0.0! Also thanks for helping me implementing some features to this ROM.
JDCTeam, BenzoROM - thanks for great cherry-picks!
MWisBest - this project was heavily inspired by his FML (Fork My Life) ROM
OptiPop - an initial set of optimizations that the currently used by me is based upon
@Meticulus - thanks for his great contributions on our devices!
@AGONTUK - thanks for an initial Marshmallow bring up!
@nieltg - Sources for Galaxy Ace 2 device
@golden-guy - thanks for great cherry-picks !
@TeamCanjica - vendor and hardware sources
@Unjustified Dev - Audio fixes
Google
CyanogenMod
AOKP
SlimROMs
EuphoriaOS
OmniROM
AOSPA
Viper4AndRroid Team
And many other devs, I could forget (please write me if I did so).
Special Thanks
@shaqman89 - for providing the build server
@S.AMU - for providing FTP server
XDA:DevDB Information
UltimateROM, ROM for the Samsung Galaxy Ace II
Contributors
ChronoMonochrome, SergeyL, JDCTeam, OptiPop Team, BenzoROM, OmniROM, AOKP, CyanogenMod, SlimRoms, AOSPA, Temasek.
Source Code: https://github.com/UltimateROM
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Stock 4.1.2 ROM or up + kitkat-compatible recovery
Based On: AOSP, CyanogenMod
Version Information
Status: Stable
Created 2016-03-20
Last Updated 2018-08-20
Changelogs
Changelog
20.08.2018 - build #13
sources update
switch to opensource sensors
switch more device libs to open source base
unified codina / janice build
02.12.2017 - build #12
fixed native moving apps to SDcard
APP2SD and similar apps now should work correctly *
fixed second incoming call not to crash rild (not tested, needs confirmation), thanks to @SergeyL
small RIL fixes
NOTE: installation method was updated. Flash latest chrono kernel build after this ROM install.
02.04.2017 - build #11
kernel updated to r5.0
sdcard mount fixes
integrated an unofficial build of the Xposed framework
ported the utility mtools *
* for repairing the broken sdcard label you can move the file /system/bin/mtools to /system/xbin folder, then type in the terminal emulator mlabel/i]. It will show the current sdcard label and will prompt to type the new one.
27.02.2017 - build #10
updated sources to 6.0.1_r78
added an initial support of the PowerHAL *
ported some changes from Resurrection Remix 7.1.1 build (thanks to SergeyL for patches)
updated kernel to r5.x.x (mostly updates from google android-3.4 kernel)
changed recovery to TWRP 3.x.x
unstable MySQL optimizations are reverted
changed buttons backlight mode - backlight is only enabled when buttons are pressed
experimental change scheduling policy of the surfaceflinger to FIFO
maybe, something yet
* at the moment there's no support of changing the PowerHAL profiles from the Settings, however, you can change profile in a file /system/etc/init.d/999powerhal
Proceed installation of this build only with data wipe.
20.09.2016 - build #9
Fully switched to an opensource RIL! Many thanks to Meticulus for finding the working RIL sources and fixing it, also I'd like to thank millosr and mickybart from Nozomi (Xperia S) forum for fixing the crash when performing a call and providing patches for debugging the proprietary libril!
More libs now are built from source - credit goes to Meticulus
Added sdcardfs support (requires at least build r4.8 of Chrono Kernel)
Added home key press to accept the incoming call and power key press to end the active call features from CyanogenMod - thanks to SergeyL for helping with finding those patches
Changed LowMemoryKiller tunables to the more aggressive + increased zram size to 400Mb - multitasking should be (hopefully) better
Changed Dynamic governor tunables to be more aggressive
Various minor fixes that improves the stability of ROM
We've also finally got rid of all shim (i.e. interposed) libraries that were needed in order for some features (camera, GPS etc) to work
30.05.2016 - build #8
updated wifi autoconnection fix (fixed the battery stats)
fixed SystemUI FC when switching USB mode via status bar notification
fixed GSM / WCDMA preferred / WCDMA Only switching
fixed soft reboot when switching 2G/3G with an enabled mobile data
added Pie Control from Paranoid Android
added SlimRecents
updated AOSP recents implementation ("clear all" button doesn't properly work, so don't enable it or use SlimRecents)
added task manager
allowed disabling of brighness slider disabling
revert AOSP camera to 5.1.1 (fixed the photo cropping issue)
added FAT images mounting via UMS support (use
sys.config.opt_sd0device=full_path_to_the_image.img build.prop setting to override the device mounted as Sdcard0 or sys.config.opt_sd1device for Sdcard1)
26.05.2016 - build #7
Work around wifi autoconnection issue
Fixed video encoding issue by some apps (instagram video upload etc) - thanks to Meticulus for the original patch
Added LockClock back
Added option to show the weather in the status bar
Various small improvements, tweaks etc.
23.05.2016 - build #6
More ROM modules compiled with GCC instead of Clang (GCC supports more optimizations)
Almost ROM modules compiled with Link Time Optimizations
Enabled graphite optimizations for more ROM modules
Added autovectorization optimization on per-modular base
More modules built in ARM mode
Allowed disabling of FC notification
Added time-context custom header images feature
Added customization of the carrier label
Added SystemUI tuner
Added display autorotation setting
19.05.2016 - build #5
updated kernel to r4.4.1
added and enabled by default UMS (USB Mass Storage) mode
re-added some default AOSP optimizations
added navigation bar
added battery level icon customization setting
added long back press to kill app feature
remove 3 secs delay in Superuser before to give the app permissions
added feature of disabling mediascaner at boot
added Sqilte performance improvements
disabled an unnecessary debug
another fixes / improvements
fixed graphical glitches in some apps caused by new UMP lib
resized bootanication (thanks Lemu @ 4pda.ru)
fixed init.d scripts
added aggresive Dynamic governor settings
13.05.2016 - build #4
cleaned up the default google optimizations, removed unnecessary flags
disabled forcible ARM mode optimization - until I revisit this again
added performance settings from OmniROM
added CM Filemanager
added a few more opensource code to libUMP, replacing calls to old library
fxed up an inadeqate CPU time consumption caused by logd process
6.05.2016 - build #3
updated sources to 6.0.1_r30
kernel update to r4.3.1
switched to GCC 5.3 toolchain by UBER
enabled graphite, fast math, loop nest, unsafe loop and some more optimizations
entire build is compiled in ARM mode
switched to opensource RIL libraries (based on CyanogenMod repos)
UMP (Unified Memory Provider) library now is mostly opensource - based upon CM sources
Attempt to fix storage permission issues in some apps such as browser - not tested
fixup for RIL java code - thanks to @SergeyL
disabled scrolling cache
SQLite code optimizations
Reduced various delays
many other fixes and improvements - thanks to SergeyL for patches
20.03.2016 - build #2
fixed APN editor crash
added removed fonts back
removed Gallery, Calendar and PrintSpooler
Viper4Android driver post-install (no need to install manually anymore)
Fixed busybox related issues
20.03.2016 - build #1
initial release
Miscellaneous
reserved
Take some time to try this ROM, and now there are some issues
1.there are lost 4 opentype fonts (compared with Sergeyl's CM13)(JP,KR,SC,TC-Regular),so Simplified Chinese display likes XXX
2.V4A needs to works with busybox, lol...
But ROM works smooth
fim5646 said:
Take some time to try this ROM, and now there are some issues
1.there are lost 4 opentype fonts (compared with Sergeyl's CM13)(JP,KR,SC,TC-Regular),so Simplified Chinese display likes XXX
Click to expand...
Click to collapse
These are removed, because of overly sized ROM. Are these fonts only that support these languages? If so, I'll of course re-add them. I was comparing this ROM to my OmniROM and haven't found these fonts, so I thought they can be safely removed.
2.V4A needs to works with busybox, lol...
Click to expand...
Click to collapse
I guess, it's common 6.0.x problem, as busybox has got partially replaced by toolbox and toybox from AOSP, thus making some apps confused.
ChronoMonochrome said:
These are removed, because of overly sized ROM. Are these fonts only that support these languages? If so, I'll of course re-add them. I was comparing this ROM to my OmniROM and haven't found these fonts, so I thought they can be safely removed.
Click to expand...
Click to collapse
Yeah,these 4 fonts only support Janpanese,Korean,Simplified Chinese and Traditional Chinese,(lastest outdated AOSP 6.0 has same problem...）Maybe OmniROM has different font files
ChronoMonochrome said:
I guess, it's common 6.0.x problem, as busybox has got partially replaced by toolbox and toybox from AOSP, thus making some apps confused.
Click to expand...
Click to collapse
Yeah....
Is there any way to fix sdcard problem?
And thanks for this awesome rom.
Fake2Dead said:
Is there any way to fix sdcard problem?
Click to expand...
Click to collapse
What problem exactly?
What GApps should we install, these modified by SergeyL? open_gapps-arm-6.0-pico-20160204.zip
https://yadi.sk/d/HX0CiHNnoGiC5
Culateralligator said:
What GApps should we install, these modified by SergeyL? open_gapps-arm-6.0-pico-20160204.zip
https://yadi.sk/d/HX0CiHNnoGiC5
Click to expand...
Click to collapse
GApps aren't personally tested by me, but I guess, you'll need those provided by SergeyL else keyboard will crash.
ChronoMonochrome said:
What problem exactly?
Click to expand...
Click to collapse
phone says sandisk sd card is corrupted. I tried to format from phone but it didn't work. Also i can't use my camera without external sdcard. And why extsdcard is sdcard0
"Sorry for my english if a have a fault"
Fake2Dead said:
phone says sandisk sd card is corrupted. I tried to format from phone but it didn't work. Also i can't use my camera without external sdcard. And why extsdcard is sdcard0
"Sorry for my english if a have a fault"
Click to expand...
Click to collapse
Did you format your sdcard as adoptable(internal) storage? This is something you actually shouldn't do and it's explicitly mentioned in the issues list as it doesn't work properly on our devices. SDcard should normally work without formatting (in case of M - which also performs encrypting of it), thanks to @SergeyL work. Now you have to format sdcard from Windows / *nix / whatever other OS; if even this won't help, we'll probably need a volunteer to test it. Personally for me sdcard works, but you may want to try SergeyL's CM13 to see if it's working there.
WiFi is unstable, lost connection from time to time, Web Browser is crashing. And any of gapps do not work - do not fit in system. Yes, i readed first post, i have orginally partitioned internal card and do not want touch it. SergeyL's CM13 work with smallest gapps
ChronoMonochrome said:
Did you format your sdcard as adoptable(internal) storage? This is something you actually shouldn't do and it's explicitly mentioned in the issues list as it doesn't work properly on our devices. SDcard should normally work without formatting (in case of M - which also performs encrypting of it), thanks to @SergeyL work. Now you have to format sdcard from Windows / *nix / whatever other OS; if even this won't help, we'll probably need a volunteer to test it. Personally for me sdcard works, but you may want to try SergeyL's CM13 to see if it's working there.
Click to expand...
Click to collapse
Thank you so much for help. I tried to format from windows(exfat) and it worked!
Edit: Don't try to format sdcard as fat32 it didn't worked on me
Pastorious said:
WiFi is unstable, lost connection from time to time, Web Browser is crashing. And any of gapps do not work - do not fit in system. Yes, i readed first post, i have orginally partitioned internal card and do not want touch it. SergeyL's CM13 work with smallest gapps
Click to expand...
Click to collapse
I can confirm Web Browser is unstable.
I haven't those WiFi problems yet, but I'm testing for little time.
What do you mean with smallest GApps?
I've tried no repartition + SergeyL GApps and I get ERROR CODE 70 -not enough system space-.
Culateralligator said:
I
What do you mean with smallest GApps?
Click to expand...
Click to collapse
I found somewhere gapps ~45MB, still too big for install, i have no idea how install Play shop
New build is 20.03.2016(#2) UP!
Changelog
fixed APN editor crash
added removed fonts back
removed Gallery, Calendar and PrintSpooler to free up some space
Viper4Android driver post-install (no need to install manually anymore)
Fixed busybox related issues
Might fix GApps not being fitted on /system issue in the future, but I'll need a volunteer to test the new partition scheme. If anyone knows how to modify CWM repartition scheme zip and create a new one with ~700-750Mb on /system, it would be even much great, because right now I have absolutely no time for this.
Enjoy!
Something weird... I've connected phone to PC 5-6 times.
Last 2 times appears sdcard1 with 1,09GB (real internal sd).
However, I have access to files of real external sd. But when I try to paste a file, it says I have no space for it.
Succesfully installed gapps removed printspooler webbrowser gallery calendar clock and 1 more thing and i found 48 mb gapps
Culateralligator said:
Something weird... I've connected phone to PC 5-6 times.
Last 2 times appears sdcard1 with 1,09GB (real internal sd).
However, I have access to files of real external sd. But when I try to paste a file, it says I have no space for it.
Click to expand...
Click to collapse
Indeed, it seems that I have misapplied one fix to the vold binary. Does this issue also appear on CM13?
P.s. it's possible that vold from CM13 will also work, because UltimateROM use same sources as CM. Can anyone try replacing /system/bin/vold and check if it helps?
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Screenshots and Videos
Screenshots
Click to expand...
Click to collapse
What works?
WorkingBoot
Display/Brightness
Touchscreen
Audio
Wifi
S-Pen
Buttons/Lights
SDCard
USB Storage
GPS
Bluetooth
IR Blaster
Camera
DRM (L3)
SELinux Enforcing
Not workingMHL
Miracast
Not in the list? Report below
Click to expand...
Click to collapse
Other issues
(empty)
Click to expand...
Click to collapse
How to install
This ROM REQUIRES Lollipop bootloader. See this post to learn how to update your bootloader.
1. Download ROM and Gapps and transfer to device
2. Boot into recovery (TWRP recommended)
3. Factory reset
4. Install ROM
5. Install Gapps
6. Reboot to system
You can skip factory resetting ("dirty flash") if you're upgrading from Official LineageOS to a newer Official build.
Click to expand...
Click to collapse
Downloads
Official LineageOS ROM: https://download.lineageos.org/n1awifi
Gapps: http://opengapps.org/ [Recommended: ARM 7.1 Pico or Nano]
Root: https://download.lineageos.org/extras
Exynos5420 team ROMs (UNOFFICIAL builds):
ROM: http://download.exynos5420.com/LineageOS-14.1/n1awifi/
Old downloads:
https://forum.xda-developers.com/devdb/project/?id=16957#downloads
Click to expand...
Click to collapse
Note: n1awifi is the same device as lt03wifi - the SM-P600
Thanks to
Without these people this ROM wouldn't exist:
Exynos5420 dev team ( @deadman96385 @thompatry @ZakooZ @Orion116 @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588 )
@ShevT - For his work on the P601 (huge contributor to our current device tree)
@Raymanfx - First to bring CM to this device
Click to expand...
Click to collapse
Changelog
Current changelogs: https://download.lineageos.org/n1awifi/changes/
Old changelogs:
Code:
20170302
Fix bug where SetupWizard didn't have buttons
Lockscreen rotation setting added to Display->Rotation settings
20170222
Go official!
Fix video rescaling issue
SEPolicy fixups
Add noise suppression blobs
Enforce SELinux
20170130
Automatic screen brightness no longer enabled by default - zakooz
Enable our cache partition - zakooz
fstab: Mark cache, userdata as formattable - deadman96385
sepolicy: Update policies for media - cryptomilk + deadman96385
Doze fixups and tweaks - BadDaemon + deadman96385 + tincho5588 + zwliew
power: Use our kernel nodes - zakooz
Use NV21 color format instead of nv12tiled - tincho5588
ramdisk: fix s5p-smem ownership - tincho5588
Config: fix audio_effects.conf - tincho5588 + deadman96385
AudioFX: build the package again - tincho5588
20170113
Security patch: 05 January 2017
Enable "Samsung Doze"
GPU: Allow user under/overclock
GPU: Allow user thermal throttling points
GPU: Allow user voltages
20170107
Updated to LineageOS
Fixed microphone (Credit to @thompatry)
Fixed DRM
20161226
Update to final CyanogenMod sources (RIP CM)
Update to Android 7.1.1
December 2016 Security patch
Enable lockscreen rotation
Fix issue where the system was using the wrong audio_effects.conf
Enable advanced low power audio
Include Deathly Aduitor in installation
Increase maximum allowed charging current
No longer using haxes to avoid qualcomm telephony code
Update to 3.4.113 (from 3.4.112)
Update IR driver to samsung LL
Deathly Aduitor no longer complains about outdated kernel
Update Sound effect libs from T705XXU1ANF8 (Samsung MM)
Update mobicore from T705XXU1ANF8 (Samsung MM)
20161201
Major restructure and reorganization (now using exynos5420-common)
Updated audio configuration to official lollipop
Fixed offline charging
Updated audio blobs to official lollipop (kitkat bootloader has no problem with this)
Enabled US 5GHz wifi bands
Updated everything except for GPU driver to samsung's official Marshmallow sources (From klimtlte)
Allow apps to see and control:
USB charging currents
S-Pen Power Saving Mode (turn off S-Pen detection if it is inserted)
All the CPU thermal throttling points
S-Pen booster (increase CPU frequency when the S-Pen touches the screen)
Touchscreen booster (increase CPU frequency when a finger touches the screen)
Capacitive button booster (increase CPU frequency when a finger touches the buttons)
20161113
Fixed bug where buttons would light up even if lights were disabled in settings
Fixed bug where software buttons were enabled by default and restored option to disable them in Settings->Buttons
Camera fully working without crashes
Android security patch: 5 November 2016
20161107
Updated to CM14.1 (Android 7.1)
Fixed camera (but it's quite unstable)
20161030
Fixed battery stand-by problem introduced in previous build
Fixed HD video playback
Audio should crackle less
Now including Cyanogenmod Setup Wizard
Fixed possible system hang and reboot on first-boot
Enabled freeform windows
Improved system UI smoothness
Improved button lights HAL
Enabled strong stack protection
20161008
IR Blaster fixed? I can't test this because my IR emitter is faulty
Disabled doze - our device doesn't properly support this and it will actually decrease battery life
Updated default CPU governor and I/O scheduler configuration - battery life should be vastly improved if you weren't use custom CPU governor settings
Updated and enabled sdcardfs - Testing, storage should work better though
Many clean-ups in the device configuration
Removed system dependency on qualcomm ext-telephony (currently a mess on wifi-only-non-qualcomm devices)
Builds are about 50mb smaller (first boot is longer though) (give me feedback on what you prefer!)
Security patch - October 5, 2016
20160925
Fixed Bluetooth
Fixed Flashlight (and camera preview)
Fixed Settings app crash
Small fixes to RIL (lack of) and WiFi
20160916
Fixed GPS
20160915
Fixed audio
Fixed video rendering
Security patch - September 6, 2016
20160908
Initial release
Click to expand...
Click to collapse
Source code
Device: https://github.com/LineageOS/android_device_samsung_n1awifi
Kernel: https://github.com/LineageOS/android_kernel_samsung_exynos5420
Exynos5420 team: https://github.com/exynos5420
Click to expand...
Click to collapse
XDA:DevDB Information
SM-P600 LineageOS14.1 Official, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
ZakooZ, https://github.com/exynos5420
Source Code: https://github.com/LineageOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: LL bootloader
Based On: LineageOS
Version Information
Status: Stable
Created 2016-09-08
Last Updated 2017-06-22
FAQ
Before using the ROM:
Q. Can I have an ETA for the next build?
A. This ROM is scheduled to build every Thursday at 8 AM GMT. The download becomes available 1 to 5 hours later. If the build fails then you have to wait until the week after.
Q. Does this ROM support custom kernels?
A. No. You can still use them but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them.
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports while using it as Xposed can cause a lot of bugs.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet available for nougat, however when it is ready you will need to use the version arm sdk 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post..
Q. What TWRP versions are supported?
A. ShevT's. Check out this thread for the TWRP download.
Q. Can the builds be dirty flashed over each other?
A. Yes if you're on Official builds.
Q. How do I dirty flash builds on top of old (working) ones?
A. Flash the ROM zip only (no gapps, don't wipe data).
Q. Will this work on Kitkat bootloader?
A. Read the install instructions.
Using the ROM:
Q. How do I enable software buttons?
A. Settings->Buttons.
Q. How do I change my Menu button to a Recents/AppSwitcher button?
A. Settings->Buttons.
Q. Do I need to provide a log if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a log.
Q. How do I get a logcat, and what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
Deathly Adiutor App
Deathly Adiutor is an open-source, modified version of Kernel Adiutor made specifically for Exynos 5420 devices.
Features
Power Saving:
S-Pen Power Saving - Same as in Touchwiz, disables S-Pen detection if it's inserted in the slot
S-Pen Input Booster - Instantly increase CPU frequency when the S-Pen touches the screen
Touchscreen Input Booster - Instantly increase CPU frequency when you touch the screen
Touchkey Input Booster - Instantly increase CPU frequency when you touch the capacitive buttons
Touchscreen Glove Mode (Not all screens support this)
CPU Control:
CPU Settings reworked - Deathly adiutor back-end was cleaned up to work specifically with our CPU
CPU Thermal - Control all thermal throttling points for the CPU (make your device run colder... or even hotter)
GPU Control:
GPU Time in States - Same as CPU Time in States (Times in each frequency)
GPU Frequency Control
GPU Voltage Control
GPU Governor Control
Battery control:
Full power statistics - See current and maximum charging currents and current source of power
Unstable power source detection - Lowers current until the power source is stable
Customize charger current limits - Make your device charge faster (safe, if the charger can not supply enough current, the board will dynamically decrease the current)
Screen-On current limiter - Limit charging if screen is on (to avoid overheating)
Speakers:
Privacy mode - Disable main speaker if headphones are plugged in
Earpiece volume
Left/Right speaker volume
Speaker equalizer
Headphones:
Left/Right channel volume
Mono output mode
Headphone equalizer
App Themes:
Light theme - White and Red
Dark theme - Grey and Red
Credits
This post was written by @ZakooZ
This app is brought you by the exynos5420 developer team: @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588, @ShevT
Translators:
@ShevT - Russian
The following people deserve distinction for their major contribution:
@tincho5588, responsible for 80%+ of the code for the new features
@deadman96385, the main maintainer of the Deathly kernel and most of the remaining code
Downloads
The app can be found in the Play Store:
Free version (with ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.ads
Donator version (no ads): https://play.google.com/store/apps/details?id=com.exynos5420.deathlyadiutor.adfree
Helping the developers
You may have noticed there's 2 versions of this app, one ad-free for donators and one with ads.
You can help us by clicking ads you're interested in for the free version, or purchasing the donator version!
We will use the money generated by this app as common money for the developers of the team. It will be used to pay for our web-hosting (we own a gerrit server and a domain name, exynos5420.com). It will also be used to buy a new device if one of ours breaks.
Translating the App
You can also help us by translating the app to your language:
1. You can start by looking at the full english language file: Link
2. Then compare it to your unfinished language file. You can find it here, under values-xx/strings.xml, xx being your language abbreviation.
3. You can then fill-in the missing strings in your language file. Here's an example of what a proper update looks like.
4. Then you can submit your translation by using our gerrit. If you don't know how to use gerrit, just PM the translation to your favorite developer and he'll get it merged!
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Stogie87 said:
Thanks for working on CM 14. You will make it compatible with LP Bootloader or you are still on KK Bootloader? Because with the LP and M AOSP roms we had to stay on KK Bootloader to avoid sound, spen and reboot issues.
Click to expand...
Click to collapse
It currently works on top of the CM13 device specific code so it's probably best to use KK bootloader. Making it compatible with LP bootloader is difficult and not a top priority at the moment
The Rom is working in lp Bootloader, unfortunately not so well. Where can I get the kitkat Bootloader?
The Google App is not working for me
wulkanat said:
The Google App is not working for me
Click to expand...
Click to collapse
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
ZakooZ said:
I don't have issues with google apps. Try flashing KK bootloader like this: http://forum.xda-developers.com/gal...cial-build-t2980604/post65631142#post65631142
Regardless, a more stable build is coming in the next few days, with better compatibility for exynos
Click to expand...
Click to collapse
Wow, the Rom is now very smooth, only with the standard gapps there are many fc and you cant sign in a google account.
Great work so far, excited for the stable build! No crash on gapps for me , everything felt pretty quick for an early build.
How about for note n8010
Plz
shukenmg said:
How about for note n8010
Plz
Click to expand...
Click to collapse
The new Note 10.1 is completly different from the Old one, so you are in the wrong thread. Don't expect too much, the n8000 is a very Old device.
New build
cm-14.0-20160915-UNOFFICIAL-n1awifi.zip
Fixed:
Audio
Video rendering (in Youtube and such)
Settings app now has cyanogenmod stuff (don't expect the settings to work) (root works)
New build
cm-14.0-20160916-UNOFFICIAL-n1awifi.zip
Fixed:
GPS (with help from @deadman96385)
Links are dead?
Edit, nevermind. Being dumb.
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
angus242 said:
Few things I've run across.
1) Cannot add a second Google account.
2) Status bar battery settings don't take. Tried adding percentage next to portrait icon but won't display.
And FYI, root is baked in. Trying to use SuperSU ended in a boot loop.
Click to expand...
Click to collapse
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
ZakooZ said:
1) 2) will be fixed by Cyanogenmod in the coming weeks, all I can do about that is wait until they update their code to support Nougat
Yes root is already baked into the developer options
Click to expand...
Click to collapse
No problems. I appreciate all the work. I'm just reporting what I've found. Ya never know what might fall through the cracks. :good:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
kryzeK said:
Awesome, dev, thank you!!!! Only for P600? Don't works on P601, right?
Click to expand...
Click to collapse
Should work on P601, but try at your own risk (RIL won't work for sure)