Discontinued
XDA:DevDB Information
SkyHigh Stock MM ROM, ROM for the Samsung Galaxy Note 5
Contributors
UpInTheAir
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: Samsung
Version Information
Status: Stable
Created 2016-04-17
Last Updated 2016-05-07
Warning - Requirements - Installation - Download
Discontinued
Help and FAQ
Discontinued
Woov nice man good to see you with a Rom too
And first post lol
Sent from SM-N920C & dr.ketan M5
battery life ??????
iko11 said:
Woov nice man good to see you with a Rom too
And first post lol
Sent from SM-N920C & dr.ketan M5
Click to expand...
Click to collapse
Just a stock experience. No more, no less
ahmedelshosh14 said:
battery life ??????
Click to expand...
Click to collapse
As is, stock.
User choice to do what he/she chooses.
UpInTheAir said:
Just a stock experience. No more, no less
As is, stock.
User choice to do what he/she chooses.
Click to expand...
Click to collapse
It's good because when I need for stock it's not very easy to use odin all the time. And as the new firmwares released I believe you keep it up to date.
Sent from SM-N920C & dr.ketan M5
iko11 said:
It's good because when I need for stock it's not very easy to use odin all the time. And as the new firmwares released I believe you keep it up to date.
Sent from SM-N920C & dr.ketan M5
Click to expand...
Click to collapse
I'm going to try. But as I said in Post #3, sometimes you will need to still flash so you have matching boot-loader, kernel, modem etc.
Uploading takes forever, over 8 hours !!
I'll try to upload N920GUBS2BPD1 overnight.
Hi UITA,
Is this ROM any different to having original/stock Rom but with SkyHigh kernel installed?
Any chance of N9200 Rom support?
elmor0 said:
Is this ROM any different to having original/stock Rom but with SkyHigh kernel installed?
Click to expand...
Click to collapse
Please read OP with minimal changes and benefits.
elmor0 said:
Any chance of N9200 Rom support?
Click to expand...
Click to collapse
Again, as per OP. maybe tomorrow night if my connection can handle it
Other variant PDA supported in future (8 hours to upload if the connection is stable)
Click to expand...
Click to collapse
Please also read this post in SkyHigh kernel thread :
http://forum.xda-developers.com/showpost.php?p=66409303&postcount=694
Good
Gửi từ SM-G935F của tôi bằng cách sử dụng Tapatalk
I assume i can flash this on the G variant as long as i flash your kernel ?
diegonnc said:
I assume i can flash this on the G variant as long as i flash your kernel ?
Click to expand...
Click to collapse
I don't see why not. I don't believe you "need" any custom kernel unless you wish benefits of those features. Back up before flash though
I'll be uploading the N920G as soon as able.
how can i add french language?
yassine78 said:
how can i add french language?
Click to expand...
Click to collapse
Try this
https://play.google.com/store/apps/details?id=com.wanam
Sent from SM-N920C & dr.ketan M5 and AudaxNote Kernel 1.1
iko11 said:
Try this
https://play.google.com/store/apps/details?id=com.wanam
Sent from SM-N920C & dr.ketan M5 and AudaxNote Kernel 1.1
Click to expand...
Click to collapse
thank you, this one enable all hidden language
iko11 said:
Try this
https://play.google.com/store/apps/details?id=com.wanam
Sent from SM-N920C & dr.ketan M5 and AudaxNote Kernel 1.1
Click to expand...
Click to collapse
I'll add a link in OP. Might save needless questions again
BTW: All that have downloaded the N920CXXU2BPC7 ROM, I uploaded the odexed version by mistake. I will rename it for now and try upload the de-odexed. But it takes 8 hours if the connection doesn't drop . . . Will try tonight so my internet isn't tied up.
Sorry about this. I am flashing the de-odexed version now for test to make sure OK.
Edit: there are a few issues with de-odex. FC etc. Still testing to look for a work-around. Otherwise stay with odex for now.
Edit2: Keep getting FC on Samsung Keyboard - SysScope - SmartCardManager no matter what de-odex process I use (smali-baksmali or oat2dex) full wipe system & data before flash
.
UpInTheAir said:
I'll add a link in OP. Might save needless questions again
BTW: All that have downloaded the N920CXXU2BPC7 ROM, I uploaded the odexed version by mistake. I will rename it for now and try upload the de-odexed. But it takes 8 hours if the connection doesn't drop . . . Will try tonight so my internet isn't tied up.
Sorry about this. I am flashing the de-odexed version now for test to make sure OK.
Edit: there are a few issues with de-odex. FC etc. Still testing to look for a work-around. Otherwise stay with odex for now.
Edit2: Keep getting FC on Samsung Keyboard - SysScope - SmartCardManager no matter what de-odex process I use (smali-baksmali or oat2dex) full wipe system & data before flash
.
Click to expand...
Click to collapse
Sent you PM.
Sent from my SM-N920C using XDA-Developers mobile app
Battlehero said:
Sent you PM.
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
All done thanks. No FC close yet. If it is still OK before sleep, I'll upload the de-odexed version with system wipe (data is not touched). Will take an eternity to upload . . .
Waiting for the g variant to test
Related
[ROM]Hashcheck-Hybrid-v2[P600][EUCND2 4.4.2]FAST
6-05-2014
First kitkat release for the Samsung P600 Wifi. Running Super smooth and the way this device should be!
Firmware Base P600UEUCND2 4.4.2 Kitkat Changelist 1146904
Includes
Deodex
Rooted & Busybox
Init.d & Tweeaks
Zipaligned
Base Kernel
Knox Removed
Flash Via TWRP - Full Wipe
Fixes:
please use this to fix SD card issue will be fixed next release
Much Much More to come in the next release!
Version 2
Download V2 Drive
Version 1
Download V1 Rapidgator
Download V1 Dropbox Thx Srikar_NBK
Download V1
Please support my work via a beer or coffee! Also keeps wife happy when I spend hours deving
XDA:DevDB Information
Hashcheck-Hybrid-v2, a ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
hashcheck
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Stable Release Date: 2014-05-06
Created 2014-04-17
Last Updated 2014-05-06
hashcheck said:
[ROM]Hashcheck-Hybrid-v1[P600][BUCND1 4.4.2]FAST
17-04-2014
First kitkat release for the Samsung P600 Wifi. Running Super smooth and the way this device should be!
Firmware Base P600UBUCND1 4.4.2 Kitkat Changelist 1058172
Includes
Deodex
Rooted & Busybox
Init.d & Tweeaks
Zipaligned
Base Kernel
Knox Removed
Much Much More to come in the next release!
Click to expand...
Click to collapse
Thanks, but can you upload to Mega? I cant download anything over 500mb unless I pay for it on your current host!
tri4life said:
Thanks, but can you upload to mega? I cant download anything over 500mb unless I pay for it on your current host!
Click to expand...
Click to collapse
I will upload on Mega tonight
hashcheck said:
I will upload on Mega tonight
Click to expand...
Click to collapse
Do you have this on Dropbox etc? If you pm me the link I can download and upload to Mega for you to put in the OP. Thanks!
tri4life said:
Do you have this on Dropbox etc? If you pm me the link I can download and upload to Mega for you to put in the OP. Thanks!
Click to expand...
Click to collapse
Uploading on MEGA now
Any chance for a 601 version?
Sent from my SM-P601 using XDA Premium HD app
Can this be flashed over a stock rooted rom without wiping?
smac7 said:
Can this be flashed over a stock rooted rom without wiping?
Click to expand...
Click to collapse
I totally recommend doing an full wipe first as you are going from 4.3 to 4.4.2! I would say there will be issues otherwise
This means that samsung release kitkat on the 605(LTE snapdragon) soon?
Install this via Odin or TWRP? Eta on Mega? Thanks a ton for this!
has anyone installed this yet? i don't think many (or any of us) can even download since rapidgator restricts large files.
I'm on Clean ROM and have TWRP 2.6.3.3. So is the ROM TWRP flashable ? Or does it require Odin ? Thanks for your work in getting Kitkat going for this tab. :good:
Srikar_NBK said:
I'm on Clean ROM and have TWRP 2.6.3.3. So is the ROM TWRP flashable ? Or does it require Odin ? Thanks for your work in getting Kitkat going for this tab. :good:
Click to expand...
Click to collapse
Yes TWRP flashable but do a full wipe
I got it coming from Rapidgator .. but slow as hell right now.
Not sure if Mega's upload will beat me on this one.
Jonsing to install
hashcheck said:
Yes TWRP flashable but do a full wipe
Click to expand...
Click to collapse
Thanks for the response. Will wait for the Mega link to become live :laugh:
Rapidgator is bombing out ... c'mon Mega
thank you
Thank you for bringing us this.... i am on kk but cant get root is this rom rooted ?
louvass said:
Thank you for bringing us this.... i am on kk but cant get root is this rom rooted ?
Click to expand...
Click to collapse
As per the OP, yes it is
Does this have the KitKat SD card fix in it?
My SD card is working perfectly so I would say yes
Sent from my Nexus 5 using Tapatalk
Hi Guys This is a stock rom for users who like stock rom without any modifications
Stock Deodexed ROM for Samsung Galaxy Note 4
Based on N910GDTU1BOF1_N910GOLB1BOF1 singapore Update
Features:
Deodexed
Zipaligned
Rooted
De-Knoxed
PrivateMod Fixed
Added 300 Fonts
Sharing :
Ask me before using any of my work .
Credits:
dsixda (for android kitchen)
Chainfire (for SuperSu)
Downloads And Instructions :
1. Download rom and Bootloader If your on earlier Bootloader Then OF1 if you allready are on OF1 then your good to go with the rom zip only
2. Place rom zip in your sd card
3. Download bootloader_modem_zip (if your on ealier bootloader)
4. Boot into download mode
5. unzip the bootloader zip till you get .md5 file
6. flash it via odin * untick auto reboot*
7. once done take off your battery and reboot into recovery
8. flash rom zip
Done
Downloads
mine 2
mine 3
mine 4
Great brother
------------------------------------------ SIGNATURE --------------------------------------------
android.zealot.fervor said:
Great brother
---------------------------------------------------- SIGNATURE -------------------------------------------------------
Click to expand...
Click to collapse
thanks brother
been wait for this thanks alot
Hello good morning anyone can tell me if this work on n910F? Tanks!
reyocio said:
been wait for this thanks alot
Click to expand...
Click to collapse
haha thanks my friend
bollycao18 said:
Hello good morning anyone can tell me if this work on n910F? Tanks!
Click to expand...
Click to collapse
no mate 910F and 910G arent compatiable anymore after OE2 bootloader
waiting for Nameless to update with BOF1.
MBariya said:
waiting for Nameless to update with BOF1.
Click to expand...
Click to collapse
We are working on a few things bro if not achieved soon il push an update in a day or 2
Deodexed OF1 stock working flawlessly on my phone.
Thanks Er. Aditya
Sent from my SM-N910G
How can i have Viper4Android Working on this?
davibs said:
How can i have Viper4Android Working on this?
Click to expand...
Click to collapse
Original thread:
http://forum.xda-developers.com/oneplus-one/themes-apps/app-viper4android-v2-3-4-0-t3040014
Viper4Android Lollipop (link from the thread):
https://mega.co.nz/#!VdQwGDha!glh6RYEnKVzokFhJ3FQOqCDAl9EMcgdTviWSCondwdc
If you installed the driver (opening the app for the first time) and made your changes, rebooted and it didn't work then you will need to flash a SElinux permissive kernel or download an app to change the SELinux status.
Sent from my SM-N910F using XDA Premium 4 mobile app
Man thank u so much for this rom..
Just what I'm looking for !!
Sent from my SM-N910G
sandhu795 said:
Man thank u so much for this rom..
Just what I'm looking for !!
Sent from my SM-N910G
Click to expand...
Click to collapse
pleasure
Bro...this rom can be used in N910G right???as i purchased the phone from singapore and using the BOC7 base band version along with OF1 build no???
vinu4u07 said:
Bro...this rom can be used in N910G right???as i purchased the phone from singapore and using the BOC7 base band version along with OF1 build no???
Click to expand...
Click to collapse
Absolutely bro you can use
Hay bro . Now i am using 5.0.1LP baseband version BOC7 and build No BOE1.
So can i go with your BOF1 and if i go with it should i need to install Boot Loader
Sent from my SM-N910G using XDA xterm
About MIUI 7
http://en.miui.com/
Features
OTA incremental updates every week
Original Samsung feature:multiwindow,camera,Power Saving Mode,S Pen,Fast charging,etc
Support Variants
N910F/N910P/N9108V/N9100/N9106W/N9109W(have been tested) and maybe other Snapdragon variants(have not been tested)
If you need more note4 snapdragon variants,please tell me!
Changelog
Temporarily empty
Instructions for Using
1. Download the ROM.
2. Copy the file to your internal or external SD Card
3. Reboot into recovery and wipe data,cache and dalvik cache
4. Install the ROM
5. Reboot your phone & enjoy it!
Download Link
N910F/N910P/N9108V:http://miuirom.xiaomi.com/rom/u2699462/5.11.1/miui_n9108v_rainbow_5.11.1_35db7f5bc6_4.4.zip
N9100/N9106W/N9109W:http://miuirom.xiaomi.com/rom/u2699462/5.11.1/miui_note4_rainbow_5.11.1_ce1d87ee78_4.4.zip
GAPPS :http://opengapps.org/?api=4.4&variant=nano
If you like my work,please press Thanks button and rate ROM with 5 stars.
THX!
XDA:DevDB Information
MIUI 7 For Samsung Galaxy Note 4, ROM for the Samsung Galaxy Note 4
Contributors
bxfxf, bxfxf
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 5.0/4.4 Baseband & Bootloader
Based On: Samsung Stock Firmware
Version Information
Status: Stable
Current Stable Version: 5.10.28
Stable Release Date: 2015-10-28
Created 2015-10-28
Last Updated 2015-10-28
Thx for another miui for note4.
Wysłane z mojego SM-N910F przy użyciu Tapatalka
bxfxf said:
Support Variants
N910F/N910P/N9108V/N9100/N9106W/N9109W(have been tested) and maybe other Snapdragon variants(have not been tested)
If you need more note4 snapdragon variants,please tell me!
Click to expand...
Click to collapse
Note 4 N910G variant please, if you can :good:
@bxfxf Your version working on bootloader and modem 5.1.1?
Cant flash this on 910F - got error - that it is not for trelxx.
TWRP 2.8.7.0
Wysłane z SM-N910F
What's the different to other miui 7?
2 questions - First, what's the difference from the other miui 7 ROM to this one for N4.
Second, no link mentioned for N910G Variant
Sent from my SM-N910F using Tapatalk
Servers are a bit shoddy aren't they? Been like that for the past hour....
I'll post a mirror once mine has finished downloading. I wouldn't want anyone to suffer the pain I'm currently suffering lol
speedyjay said:
I'll post a mirror once mine has finished downloading. I wouldn't want anyone to suffer the pain I'm currently suffering lol
Click to expand...
Click to collapse
The download isn't slow. Downloaded in around 3 minutes.
The download is very slow mate, its only just turned over to 93% after an hour. I've just upgraded my net to 200mbps so I definitely know its not my net. The download is definitely slow dude
speedyjay said:
The download is very slow mate, its only just turned over to 93% after an hour. I've just upgraded my net to 200mbps so I definitely know its not my net. The download is definitely slow dude
Click to expand...
Click to collapse
I must be lucky then.
Fingerscan print work in this rom?
extended batteries
Can you please include the extended battery fix?
It's only a file to copy to the kernel sources before compiling.
The file is avaliable here: http://forum.xda-developers.com/showpost.php?p=61870638&postcount=107
It would enable us to use bigger batteries than stock. (There is a problem without the fix when the battery is low)
Thank you!
Ogy77 said:
@bxfxf Your version working on bootloader and modem 5.1.1?
Click to expand...
Click to collapse
I have not tested,you can test it for us
lgumo01 said:
Cant flash this on 910F - got error - that it is not for trelxx.
TWRP 2.8.7.0
Wysłane z SM-N910F
Click to expand...
Click to collapse
will fix it in the next build.
Does this also have s-view?
bxfxf said:
will fix it in the next build.
Click to expand...
Click to collapse
Thanks for this new MIUI rom .
Is it compatible with N910G if we modify the updater script ?
bxfxf said:
will fix it in the next build.
Click to expand...
Click to collapse
I have a same issue with F version
@rafik25,for n910f variant (and maybe other one), problems proceeds from META-INF >com > google > Android > updater-script?
Thanks for your amazing work, waiting patiently because hobby of course [emoji4]
Delete
Good to c new ROM for our beloved galaxy s6...welcome to the party Astrubale
Screenshots please...???
Im waiting the rom,to test in my g920f.
Delete
ROM is up, link added.
Astrubale said:
ROM is up, link added.
Click to expand...
Click to collapse
tank you
Could you take some sreenshots?
KornyeiDavid said:
Could you take some sreenshots?
Click to expand...
Click to collapse
For now is only deodex, you can see the screen of the stock S6 edge. In the next build I'll add some tweak and debload rom, then I'll upload some screen
Hi,this rom is great in 920i variant, only the Google Play not download apps error, the wizar of configuraron in first boot error in Connection, the all work great, very like the smood effect in this rom, fix this errors, and Knox in On, not binarios in ROOT, thank you
polarworks said:
Hi,this rom is great in 920i variant, only the Google Play not download apps error, the wizar of configuraron in first boot error in Connection, the all work great, very like the smood effect in this rom, fix this errors, and Knox in On, not binarios in ROOT, thank you
Click to expand...
Click to collapse
Root full fixed in next version.
Good rom, simple and smooth.
Has it f2fs support so we can use it with arter kernel (system, data & cache)?
Still uploading?
Sent from my SM-G920F using XDA-Developers mobile app
peluillo said:
Still uploading?
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
About 5 hours, very bad internet connection here.
TENN3R said:
Good rom, simple and smooth.
Has it f2fs support so we can use it with arter kernel (system, data & cache)?
Click to expand...
Click to collapse
I don't tested this yet, for this I need a tester.
Is the Rom still uploading
Sent from my SM-G925F using Tapatalk
V3 stable is out, link the OP!!!!
@Astrubale
There is a new version from today (PFI).
Is it really better than PF1 ?
Whats the criteria for knowing which version is newer ?
Many thanks in advance
enebro77 said:
@Astrubale
There is a new version from today (PFI).
Is it really better than PF1 ?
Whats the criteria for knowing which version is newer ?
Many thanks in advance
Click to expand...
Click to collapse
Changelist, higher = newer .. unless it's a branded firmware (e.g. AT&T, Vodafone etc.)
In this case G920FXXU3DPFI (8007686) is the latest. PF9 may have a higher changelist, but it's a branded firmware from Vodafone.
Btw what is the difference between XXU 3 and XXS 3 firmware? The PF1 is XXS3 and others are XXU3 like PFI
Hi DEV
U can new version upload in the host AFH ??
Sent from my SM-G920F using Tapatalk
This is full port of C900F (Indian Version), all things working good, It is having good speed and battery life
Working things
1. All C900F apps
2. Theme store
3. Edge apps
4. Spen and apps
5. Screen off memo
Bugs
1. Photo editor FC
2. Cant turn off torch from notification (need to use edge panel - quick settings)
3. Reboot or booting takes long time
4. No blurr for edge and air command
5. Heptic feedback not working
6. Fingure print & VoLTE not working
Right now I am somewhat stuck and not having time to work on this so if someone wants to contribute about bugs then welcome
Default kernel is for N910G, other model people need to flash kernel for their model I recommend RamKernel
Download link
https://www.androidfilehost.com/?fid=745425885120718779
XDA:DevDB Information
RamROM_C9, ROM for the Samsung Galaxy Note 4
Contributors
Ram121
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Latest marshmallow bootloader and modem
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2017-03-24
Created 2017-03-24
Last Updated 2017-03-24
reserve
may need
Is the fingerprint working?
Sent from my SM-N910F using XDA-Developers Legacy app
@JohnnyGhost666 Hmm...... That's a damm good question little buddy! You mind reading the Opening Post
Sent from my SM-N910F using XDA-Developers Legacy app
ops
---------- Post added at 08:02 PM ---------- Previous post was at 07:58 PM ----------
dancsuri said:
ops
Click to expand...
Click to collapse
JohnnyGhost666 said:
Is the fingerprint working?
Sent from my SM-N910F using XDA-Developers Legacy app
Click to expand...
Click to collapse
Bugs
1. Photo editor FC
2. Cant turn off torch from notification (need to use edge panel - quick settings)
3. Reboot or booting takes long time
4. No blurr for edge and air command
5. Heptic feedback not working
6. Fingure print & VoLTE not working
Good job as always, much appreciated.
Shall the same kernel be used for N910-F that we use for Note 7 ports?
oqaab said:
Good job as always, much appreciated.
Shall the same kernel be used for N910-F that we use for Note 7 ports?
Click to expand...
Click to collapse
I dont know about others but for other models than G you can use RamKernel for that model it can work on all ports
Ram121 said:
I dont know about others but for other models than G you can use RamKernel for that model it can work on all ports
Click to expand...
Click to collapse
Just confirming 910G directly I can install right?
Will the fingerprint workaround work?
What about xposed?
Thank you Ram
tytnguy said:
Just confirming 910G directly I can install right?
Will the fingerprint workaround work?
What about xposed?
Thank you Ram
Click to expand...
Click to collapse
1 post: "Bugs"
dancsuri said:
1 post: "Bugs"
Click to expand...
Click to collapse
Thanks but, I am asking if the "workaround for fingerprint works?" Because finger print is something MUST have for me.
Trying this out for a bit - so far, very nice and smooth.
Sent from my SM-C900F using XDA-Developers Legacy app
Hello, Can I have a question? What is special in C900F rom? Everyone here is trying to port the N7, N5, S7 Edge... and you, my favourite Rom developer come with this. I am waiting for discussion but it seems nobody testing it . So I think, I will do.
Do you think this Rom will work on N910F with your RamKernel same asi on 910G? Or there can be more issues? THANKS for the RamRoms BTW!! ))
EDIT: I tried to instal.. Did full wipe, instal rom, instal ramkernel V6 for 910F, and... it wont boot.
Nice rom i will try
does it supports volte??
Look at the first post!
Enviado desde mi SM-G9350 mediante Tapatalk
werfewr3 said:
Hello, Can I have a question? What is special in C900F rom? Everyone here is trying to port the N7, N5, S7 Edge... and you, my favourite Rom developer come with this. I am waiting for discussion but it seems nobody testing it . So I think, I will do.
Do you think this Rom will work on N910F with your RamKernel same asi on 910G? Or there can be more issues? THANKS for the RamRoms BTW!! ))
EDIT: I tried to instal.. Did full wipe, instal rom, instal ramkernel V6 for 910F, and... it wont boot.
Click to expand...
Click to collapse
Installed and running great on my N910F just as it is.
Sent from my SM-G935F using XDA-Developers Legacy app
nice man.
any update?
hello can anyone update me if VOLTE works on this ROm by default
Have you tried reading the OP ?
Sent from my SM-G935F using XDA-Developers Legacy app