Hi guys,
Just unlocked my bootloader and began the root process.
I followed part of this guide but without backing up my DRM keys. http://forum.xda-developers.com/z5-compact/general/summary-tutorial-root-sony-xperia-z5-t3360515
I flashed my kernel and the recovery O.K.
fastboot flash recovery recovery.img
flashboot flash boot boot.img
I've tried two versions of TWRP and two different versions of the kernel AndroPlus.
When performing fastboot reboot after flashing both files my phones LED blinks RED once and then does nothing.
Dramatic and scary. What can I do to fix this? When trying to boot without the cable in my phone just vibrates once and does nothing. Screen doesn't light up at all. I'm so worried.
MatMew said:
Hi guys,
Just unlocked my bootloader and began the root process.
I followed part of this guide but without backing up my DRM keys. http://forum.xda-developers.com/z5-compact/general/summary-tutorial-root-sony-xperia-z5-t3360515
I flashed my kernel and the recovery O.K.
fastboot flash recovery recovery.img
flashboot flash boot boot.img
I've tried two versions of TWRP and two different versions of the kernel AndroPlus.
When performing fastboot reboot after flashing both files my phones LED blinks RED once and then does nothing.
Dramatic and scary. What can I do to fix this? When trying to boot without the cable in my phone just vibrates once and does nothing. Screen doesn't light up at all. I'm so worried.
Click to expand...
Click to collapse
did you try to flash first the boot.img and after the recovery ?
acabreram said:
did you try to flash first the boot.img and after the recovery ?
Click to expand...
Click to collapse
I've tried another kernel and it's booting but hanging at the three dots. (bootscreen) been waiting a few minutes. hopefully it gets to system.
MatMew said:
I've tried another kernel and it's booting but hanging at the three dots. (bootscreen) been waiting a few minutes. hopefully it gets to system.
Click to expand...
Click to collapse
Ok yo can try this too
Y tried and working fine root & xposed
It's tus stock kernel but with the habilita to support root
Similar issue for me
I've had almost exactly the same issue today:
- I unlocked boatloader using Sony standard process
- I followed the steps under 'How to Install CM13' within CTXz's guide here
- After flashing the Kernel and THEN the TWRP, I reboot and the phone flashes red LED, then green, then off, then red and then stays on green for a while (screen is blank). My computer registers that there is a new connection by making a sound but doesn't show up any devices that I can see.
- Periodically, I get the device disconnection sound and the green LED goes off, then red comes on, then solid green again until next cycle.
- If I disconnect the cable, the LED goes off. When I try to turn the phone on without cable attached, it buzzes but does nothing - no LEDs. I can't tell whether it is on or not, except that doing hard reset with PWR+Vol.Up gives no reaction.
- When I re-attach cable normally, the red/green LED sequence starts immediately with no need to turn PWR on, which would suggest that the phone is perhaps on.
- I am able to get into bootloader as normal and fastboot registers the device just fine.
- There is no yellow LED
I started with Kernel AndroPlus v24 and TWRP 3.0.0.0.
Failing that, I tried Kernel v20. Then I tried AndroPlus' twrp-2.8.7.0-E5823-32.0.A.6.152.
Have also tried Kernels v20 and v21 with TWRP 3.0.0.0.
I haven't had any fast boot errors - all flashes come back 'OKAY'.
I'd be very grateful for any help? Have I missed something?!
update to my post above:
I used: 'fastboot boot recovery.img' and this fired up the Sony logo with white screen and blue LED. However, after 10 mins of waiting, there was no change in status and I still couldn't get into TWRP with pressing Vol buttons, even after several restarts and unplugging, replugging etc.
Then, I realised the stock ROM on my phone before this whole process was Lollipop 5.1.1 Build 32.0.A.6.200. So, I flashed older versions of the Kernel and TWRP. Now, I can boot into the ROM and use the phone (almost) as normal except, being plugged in, it keeps re-detecting the USB cable. I now also get the Sony boot screen followed by yellow LED.
If I don't touch anything, it boots into the ROM. However, if I press a Vol button while the yellow LED is on during boot, then it just resets.
Thus, I still cannot get into the TWRP interface. Perhaps I need a TWRP version that is specific to my build - the one I have is from AndroPlus website and refers to the previous build (twrp-2.8.7.0-E5823-32.0.A.6.152.img)?
okay, further update (to save someone replying!)
I managed to boot into the system using AndroPlus Kernel v05a (I had Lollipop build ###.200), but still couldn't get into any TWRP.
I then followed the general process explained in this thread, albeit had to do a heck of a lot of research to understand the detail that is omitted from that (otherwise very useful and concise) original post. For example:
- how to actually use Flashtool (installing drivers and then getting hold of the right firmware from within the program);
- the difference between Fastboot and Flashmode;
- having to plug in the phone while it is loaded into the system before then flashing the selected firmware with Flashtool and ONLY THEN unplugging, switching off and booting into Flashmode.
- loading up the system after flashing the Kernel and TWRP so that I connect to computer and re-copy the erased SuperSU .zip file back onto storage, and then re-booting into TWRP and how to flash a zip file with TWRP.
Having now got a stock Marshmallow firmware rooted, my next step is to go back to the original guide I was following and try to install Cyanogen!
Thank you to all the people who have posted help guides throughout this site so that I could piece together what I needed to do - even though it has still taken me about 30 hours of my life to learn all this!
Hopefully my experience might help someone else in due course...
robledog said:
okay, further update (to save someone replying!)
I managed to boot into the system using AndroPlus Kernel v05a (I had Lollipop build ###.200), but still couldn't get into any TWRP.
I then followed the general process explained in this thread, albeit had to do a heck of a lot of research to understand the detail that is omitted from that (otherwise very useful and concise) original post. For example:
- how to actually use Flashtool (installing drivers and then getting hold of the right firmware from within the program);
- the difference between Fastboot and Flashmode;
- having to plug in the phone while it is loaded into the system before then flashing the selected firmware with Flashtool and ONLY THEN unplugging, switching off and booting into Flashmode.
- loading up the system after flashing the Kernel and TWRP so that I connect to computer and re-copy the erased SuperSU .zip file back onto storage, and then re-booting into TWRP and how to flash a zip file with TWRP.
Having now got a stock Marshmallow firmware rooted, my next step is to go back to the original guide I was following and try to install Cyanogen!
Thank you to all the people who have posted help guides throughout this site so that I could piece together what I needed to do - even though it has still taken me about 30 hours of my life to learn all this!
Hopefully my experience might help someone else in due course...
Click to expand...
Click to collapse
I had the same problem and solution is as is written here.
I had to flash Stock Firmware Marshmallow via Flashtool. After this I flashed kernel(boot) and recovery without problems and yellow icon will displayed.
Don't want to warm up this kind of old thread, but I have exactly the same issue (E8523). Would any of you mind to post their (stock) ROM versions which finally worked? I tried almost every combination that came to my mind (Customized CE1 32.2.A.0.224 => v31, several LP versions => more or less 20 to 32...).
Currently after installing the MM I mentioned the stock kernel worked, but when I flash the AndroPlus kernel (fastboot flash boot /path/to/boot.img) it won't boot up, black screen, looks like no dtb found (doesn't even try to load). This is also the message I get when I try to boot this img via fastboot directly.
I am sure I am missing something really stupid (quite new to android devices), but what?
IGNNE said:
Don't want to warm up this kind of old thread, but I have exactly the same issue (E8523). Would any of you mind to post their (stock) ROM versions which finally worked? I tried almost every combination that came to my mind (Customized CE1 32.2.A.0.224 => v31, several LP versions => more or less 20 to 32...).
Currently after installing the MM I mentioned the stock kernel worked, but when I flash the AndroPlus kernel (fastboot flash boot /path/to/boot.img) it won't boot up, black screen, looks like no dtb found (doesn't even try to load). This is also the message I get when I try to boot this img via fastboot directly.
I am sure I am missing something really stupid (quite new to android devices), but what?
Click to expand...
Click to collapse
Pro tip: hold shift and right click inside folder with recover.IMG or voot.IMG to open command prompt from that folder. Then all you have to do is type fastboot flash boot boot.IMG. I suggest trying to put a custom recovery like twrp on and flashing the xpower ROM from that, it will give you everything in one package.
Edit: fwiw I'm pretty sure custom recoveries have been able to flash .IMG fils for a few years now but I've never actually tried it. Might be worth a shot.
Thanks, but I haven't found cmd.exe on my linux machine yet^^ (I suppose wineconsole is cheating )
I know how to flash *stuff* to my phone, but that *stuff* seems only to work if some specific version of stock rom was installed previously. My best guess is the bootloader changes and supports different dtb formats on every version.
Stock Marshmallow 6.0.1 Customized CE1 32.2.A.0.224 does _not_ work for installing any version of AndroPlus kernel (tried a few...). It fails at boot (does not even load system, probably dtb).
Just in case someone might run into similar issues: What finally worked was Stock MM 6.0.1 Customized DE 32.2.A.0.224 with AndroPlus v31. It seems to be some older release (?), it says R2C instead of R9C for Customized CE1.
I could not find this information anywhere on the net (maybe its me), so for those with a slow internet connection the above version should work. You don't have to actually boot it, flashing is enough.
Thanks for sharing the information in this tread, it really helped me to unbrick my phone!
I started with Lollipop on my brand new Z3C and tried to root using AndroPlusKernel v31 / TWRP 3.0. This resulted in a softbick state, only being able to boot in fastboot mode.
After many hours struggling, an upgrade to stock Marshmallow (E5823_32.2.A.0.224) did the trick. This somehow seems ta make the device ready for the new kernel and recovery (I guess it has to do with the partitions in the filesystem).
Anyway, from stock Marshmallow I could start all over and succeeded to flash a custom bootloader, recovery and now have the ability to flash any desired rom! Thanks again.
To updrade to stock MM I used the instructions in this thread:
[GUIDE][18th Dec][4Noobs] Flashing A FTF File Using Flashtool
To set up TWRP recovery I used the instructions in this thread:
[ROM][UNOFFICIAL][6.0.1][E5823/E5803] CyanogenMod 13 for the Sony Xperia Z5C [ALPHA]
The stock rom I used for my E5823 is "E5823_32.2.A.0.224_R1C_CIS Generic_1298-5167.ftf" from xperiablog.net
Since I'm a new registered member I can't post external links
Google it and you're set!
IGNNE said:
Just in case someone might run into similar issues: What finally worked was Stock MM 6.0.1 Customized DE 32.2.A.0.224 with AndroPlus v31. It seems to be some older release (?), it says R2C instead of R9C for Customized CE1.
I could not find this information anywhere on the net (maybe its me), so for those with a slow internet connection the above version should work. You don't have to actually boot it, flashing is enough.
Click to expand...
Click to collapse
I'm having the same problem, where did you get that MM stock version from?
And what do you mean by "you don't have to actually boot it"?
Search for XperiaFirm and Flashtool. There is plenty.
You don't have to start your freshly installed Stock Rom version "...". You just have to flash it (write it to your phone) Now you boot your phone in fastboot mode and flash your custom kernel and mod rom of your choice. Seems to be some incompatible whatever between not matching kernel versions and the "stuff" flashing installs (suspect sth like bootloader, but no idea).
I have flased boot.img nd recovery.img on android 7.1.1 z5 compact my phone won't pass the sony logo
any help ?
---------- Post added at 11:05 AM ---------- Previous post was at 10:54 AM ----------
starchild78 said:
I have flased boot.img nd recovery.img on android 7.1.1 z5 compact my phone won't pass the sony logo
any help ?
Click to expand...
Click to collapse
I've just discovered I can boot into twrp
anything I can do to fix this from there ?
Related
Installing the new Sony Bootloader and Recovery
THIS IS FOR ALREADY UNLOCKED DEVICES!
DO NOT TRY THIS ON A GPE!Since a lot of people seem to have problems keeping their recovery when flashing Lollipop-ROMs i decided to put up this little guide...
You can also Skip this whole guide, by just flashing the newest stock-FW at least once!
First off, as already said, this is for already unlocked devices. You can use this Guide until "Install Custom ROM", except the rooting part, for rooting use this, if you haven't already!
Don't do it if you don't atleast somewhat know what you are doing.
I am not responsible for bricked devices, or whatever you might end up with.
So, lets get started.
1. Download Sonys FlashTool "EMMA" and install it: http://developer.sonymobile.com/downloads/tool/flash-tool-for-xperia-devices/
In the .zip file from the FlashTool you'll find a File "customization.ini"
Copy this file to the installation directory of EMMA, usually "C:\Program Files (x86)\Sony Mobile\Emma"
If you don't copy that file, Emma will ask you for a login, don't create an account there, you will NEVER get any activation-email!
2. Open EMMA and boot your Phone into FlashMode (Power off your device -> Press and hold volume DOWN -> while pressing volume DOWN insert USB-Cable)
3. Emma should now recognize your device, but you have to select it manually tough. Select your EXACT model number. Again, I am not responsible for any bricked devices or whatever you end up with!
Now select the "(Open Devices) TA update" and click "Apply Service"
It should take a few seconds and should then display SUCCESS.
You can now close Emma
4. If you haven't already download FastBoot and Drivers: http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
(Run as Administrator!)
5. Download the newest version of twrp and put it somewhere:
New Inoffcial twrp-3.0.0 build by me: http://forum.xda-developers.com/xperia-z-ultra/development/togari-twrp-recovery-3-0-0-t3314440
Old official versions: https://twrp.me/devices/sonyxperiazultra.html
6. Finally boot up you Phone in FastBoot-mode (Power off -> press and hold volume UP -> while pressing wolume UP insert USB-Cable
Your LED should now light up blue
Shift+Rightklick in the Folder where you have put TWRP recovery, and select "Open Commandprompt here"
Now write "fastboot flash recovery FILENAME_OF_TWRP_FILE"
You can now unplug your USB-Cable and boot into recovery and continue from there.
Your recovery will be permanent, meaning you won't loose it or replace with any other recovery that might come with your ROM.
I hope this was somewhat helpfull
Any one can flash this to C6806?
jacklau2000 said:
Any one can flash this to C6806?
Click to expand...
Click to collapse
You can try, just select your modelnumber in emma
If the "Open Devices (TA Update)" show up, you're fine. If not just don't do anything.
But do not try this on a GPE!
alia5 said:
You can try, just select your modelnumber in emma
If the "Open Devices (TA Update)" show up, you're fine. If not just don't do anything.
But do not try this on a GPE!
Click to expand...
Click to collapse
tried, but no luck. thanks.
It's really weird, I used emma, and installed their latest ta update. Now I can get into fastboot mode, all commands execute successfully, but the recovery never takes. The vol down + Power doesn't work, nor does 'adb reboot recovery'. Am I missing a step somewhere? This isn't my first android device, but from where I sit, it seems like something is up with my xzu.
If I try and install the 14.4* update through emma, it goes through the whole process, completes "successfully", then boots into 14.5. Something is clearly not working here.
The TA update only unlocks the ability to boot to recovery, it doesn't install one. And no, flashing official TWRP to recovery partition doesn't work, it must be compiled again to work on normal recovery partition and not in FOTAKernel, where it must be flashed to work.
Regards
teddy74eva said:
The TA update only unlocks the ability to boot to recovery, it doesn't install one. And no, flashing official TWRP to recovery partition doesn't work, it must be compiled again to work on normal recovery partition and not in FOTAKernel, where it must be flashed to work.
Regards
Click to expand...
Click to collapse
I´m on CM 11 M12 (looking forward to 12) + the new sony bootloader without any custom Kernel stuff.
Sadly, you are right. It´s not done with downloading twrp-2.8.5.0-togari.img and fastboot flash recovery yourfile.img.
The last offical TWRP release for Xperia Z Ultra is from february 2015, any chance they release an updated version for the new Sony bootloader?
Hermann1222 said:
I´m on CM 11 M12 (looking forward to 12) + the new sony bootloader without any custom Kernel stuff.
Sadly, you are right. It´s not done with downloading twrp-2.8.5.0-togari.img and fastboot flash recovery yourfile.img.
The last offical TWRP release for Xperia Z Ultra is from february 2015, any chance they release an updated version for the new Sony bootloader?
Click to expand...
Click to collapse
I will try to compile one because, you know, summer holidays and no school however I don't know if I will make it.
Regards
Is there any (wish for TWRP) recovery for togari, which use the new bootoader?
FYI:
My device is a brazilian c6843.
Emma recognizes the device automatically and indicates with an exclamation point that there is no services available to the unit.
In the case someone doesn't know, it's basically the c6833 with DTV 1seg. It's totally compatible with c6833 firmware, losing TV, of course.
You sir are the real hero! Thank you!
I have a xzu running cm12.1, and I have 2 quick questions for those with more knowledge than me
Is it possible to flash the new bootloder using the open source FlashTool?
If I have to use emma, is it possible to just apply the open device ta update *without* installing stock firmware first?
pbgapski said:
If I have to use emma, is it possible to just apply the open device ta update *without* installing stock firmware first?
Click to expand...
Click to collapse
You can totally do that, BUT, the newest stock firmware also has some firmware updates regarding nfc, also having the newest stock rom flashed at least once will be kind of a requirement to get everything properly working on marshmallow roms.
So I would say flash the newest stock rom at least once!
missing clues on new recovery partition
alia5 said:
You can totally do that, BUT, the newest stock firmware also has some firmware updates regarding nfc, also having the newest stock rom flashed at least once will be kind of a requirement to get everything properly working on marshmallow roms.
So I would say flash the newest stock rom at least once!
Click to expand...
Click to collapse
I followed your advice, but it seems I am missing a few clues.
My sirius was on cm12.1. I backedup and flashed D6543_23.4.A.1.232_1281-5466_R6C.ftf with flashtool on linux. I tried to use emma (several times) afterwards to check for any TA updates, but all I got was "no services matched this device" or something like that. Google tells me I am not the only one with this issue with emma
Then I used fastboot to install twrp 3 from twrp.me to recovery partition, but I could not access twrp.
I fastbooted recovery again with twrp 2.8.7, and this time I could enter twrp and reflashed CM.
Now I can access twrp using the button combinations while booting, but rebooting to recovery from CM leads to a bootloop. Has anyone experienced this as well?
So it seems I am still missing a few clues to using the recovery partition. Is any build of twrp supposed to work on both FOTAkernel and recovery partitions?
Is there a TWRP 3 build that works from 'coldboot to recovery' and 'cm reboot to recovery' with the new bootloader? Any pointers?
pbgapski said:
Now I can access twrp using the button combinations while booting, but rebooting to recovery from CM leads to a bootloop. Has anyone experienced this as well?
So it seems I am still missing a few clues to using the recovery partition. Is any build of twrp supposed to work on both FOTAkernel and recovery partitions?
Is there a TWRP 3 build that works from 'coldboot to recovery' and 'cm reboot to recovery' with the new bootloader? Any pointers?
Click to expand...
Click to collapse
Well, booting to recovery on separate partition from os, requires the rom to have a patch... the "new" mm-roms (when they finally hit aka. are ready to be shared in public) will have that, so no worry, just wait.
why it said my phone have no available service, i am on c6833
alia5 said:
Well, booting to recovery on separate partition from os, requires the rom to have a patch... the "new" mm-roms (when they finally hit aka. are ready to be shared in public) will have that, so no worry, just wait.
Click to expand...
Click to collapse
I have the same problem but not bootloop just stuck at starting apps screen,BTW did you have a TWRP scripts for flashing TWRP 3.0 into FOTAkernel
hi .. after this update can i relock my phone and restore drm functions?! or phone go to unlocked forever?!
pls help i need answer
erfanzz said:
pls help i need answer
Click to expand...
Click to collapse
Search the forums on how to backup TA partitions. I have mine but never tried to restore them
Hey guys,
I've had a total of 4 android smartphones during the last years, and I did root all of them and even install diferent ROM's, but on this phone (Honor 7) was kinda diferent.
The root process is way more complex than all the other androids I did root (simply flash a .zip file...) so I've been post-poning this task over and over..
Finally yesterday I gained courage to try out rooting my phone, and while attempting to root my Honor 7, after flashing SuperSU from TWRP, my phone no longer booted.
Stressed as I was, I just told to myself "f*ck it" and formatted the system and I didn't care much if there was a fix without needing to format the system. (but then I realised that I could not find any .img ROM files to flash from TWRP recovery, so basically I did my actions wrong once again)
I followed the tutorial from guidebeats.com which talks about rooting EMUI 4.0 Android 6.0 (I cant post links)
Basically this is the story:
While unlocking the bootloader, even though, the tutorial said the phone would reboot itself after typing "flashboot oem unlock 1234934829" I did a hard reboot (or reset?) holding (VOL+) + Power button and I have the feeling that the bootloader unlock was not 100% done, even if it said it was unlocked. (Phone was working perfectly fine there)
Then I flashed SuperSU, and I could no longer boot. After powering up my phone, after the first splashscreen, the screen would only turn black.
What (I think) I need to now is remove the TWRP recovery, and use the stock one and attempt to install an "update" using (Vol+) + (Vol-) + Power. (please correct me if I'm wrong)
But now there's some issues I got that I'd like some help with:
1- How can I get back to the stock recovery? (NOTE: I currently got no OS installed on my Honor 7, since I formated it)
2- Will I need to lock and unlock my bootloader again (if I want to 'fix' the bootloader unlock?)
3- Where can I get official Honor 7 stock ROM? (would be awesome if there was already the Android 6 stock rom for a clean install)
4- What are the steps on this tool (Honor 7 Multi-Tool) to root my phone?
I need my Honor 7 asap
Sorry for the long post, It's my first time doing a more advanced root and I have all these questions.
Thank you very much for any kind help!
joaomPT said:
Hey guys,
I've had a total of 4 android smartphones during the last years, and I did root all of them and even install diferent ROM's, but on this phone (Honor 7) was kinda diferent.
The root process is way more complex than all the other androids I did root (simply flash a .zip file...) so I've been post-poning this task over and over..
Finally yesterday I gained courage to try out rooting my phone, and while attempting to root my Honor 7, after flashing SuperSU from TWRP, my phone no longer booted.
Stressed as I was, I just told to myself "f*ck it" and formatted the system and I didn't care much if there was a fix without needing to format the system. (but then I realised that I could not find any .img ROM files to flash from TWRP recovery, so basically I did my actions wrong once again)
I followed the tutorial from guidebeats.com which talks about rooting EMUI 4.0 Android 6.0 (I cant post links)
Basically this is the story:
While unlocking the bootloader, even though, the tutorial said the phone would reboot itself after typing "flashboot oem unlock 1234934829" I did a hard reboot (or reset?) holding (VOL+) + Power button and I have the feeling that the bootloader unlock was not 100% done, even if it said it was unlocked. (Phone was working perfectly fine there)
Then I flashed SuperSU, and I could no longer boot. After powering up my phone, after the first splashscreen, the screen would only turn black.
What (I think) I need to now is remove the TWRP recovery, and use the stock one and attempt to install an "update" using (Vol+) + (Vol-) + Power. (please correct me if I'm wrong)
But now there's some issues I got that I'd like some help with:
1- How can I get back to the stock recovery? (NOTE: I currently got no OS installed on my Honor 7, since I formated it)
2- Will I need to lock and unlock my bootloader again (if I want to 'fix' the bootloader unlock?)
3- Where can I get official Honor 7 stock ROM? (would be awesome if there was already the Android 6 stock rom for a clean install)
4- What are the steps on this tool (Honor 7 Multi-Tool) to root my phone?
I need my Honor 7 asap
Sorry for the long post, It's my first time doing a more advanced root and I have all these questions.
Thank you very much for any kind help!
Click to expand...
Click to collapse
As you are already familiar with adb and other stuff so will write a short post for you.
To download latest firmware, head to
http://forum.xda-developers.com/hon...tock-firmware-packages-honor-7-t3448747/page1
Google, download and install Huawei update extractor and open UPDATE.APP in it (obtained after extracting firmware).
You can see all the images. Just extract recovery and boot to platform-tools folder.
Meantime, do the unlocking command again, with
Fastboot OEM unlock xxxxxxxxxxxxxxxx
Followed by fastboot reboot
And press and hold the vol down button again until you reboot in bootloader.
Flash the recovery and boot you extracted using
Fastboot flash recovery recovery.img
Fastboot flash boot boot.img
(I got a habit of extracting and flashing system and Cust using
Fastboot flash system system.img
Fastboot flash Cust Cust.img
But they are not necessary)
Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again).
Please do report back if it comes to life.
To root, just flash twrp and then use SuperSU 2.62 (no other version) and update it later using play store.
Sent from my PLK-L01 using XDA Labs
Hey!
Thank you alot for your reply.
From the link you sent about the firmwares, there are alot of Builds for the L01 (EU) model. Can I simply use the latest from the list or I gotta install 1 by 1 (from older to newer)?
Also, the bootloader unlock thing, is it ok if I wait to do it until I install the stock ROM again? Because I think I don't have the code anymore (Also don't know about IMEI)
Other thing, yesterday before bricking my phone, I tried to re-unlock the bootloader as you said above, but it didnt let me because "it was already unlocked".
I really have no idea if it's 100% unlocked or not.
important thing!
With those ROM's, I still have the right to receive official OTA updates from the HiCare app right?
Thank you again
joaomPT said:
Hey!
Thank you alot for your reply.
From the link you sent about the firmwares, there are alot of Builds for the L01 (EU) model. Can I simply use the latest from the list or I gotta install 1 by 1 (from older to newer)?
Also, the bootloader unlock thing, is it ok if I wait to do it until I install the stock ROM again? Because I think I don't have the code anymore (Also don't know about IMEI)
Other thing, yesterday before bricking my phone, I tried to re-unlock the bootloader as you said above, but it didnt let me because "it was already unlocked".
I really have no idea if it's 100% unlocked or not.
important thing!
With those ROM's, I still have the right to receive official OTA updates from the HiCare app right?
Thank you again
Click to expand...
Click to collapse
Just use B380 as it's the latest full firmware available there.
Unlocking bootloader again was just a precautionary measure (proceed without it and if it is not 100% unlocked and if something goes wrong, we can troubleshoot later, which imo, won't happen)
And yep, if you keep the firmware as it is, but if you flash twrp and root, you will still see the update available in Hicare but will have to install stock recovery again before upgrading. (Nothing else is needed as SuperSU 2.62 gives a systemless root so you only need to flash back stock recovery for an update)
I am not against honor-tool bit it's best to do things manually as it makes you learn stuff and is easy to troubleshoot if something is amiss.
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Just use B380 as it's the latest full firmware available there.
Unlocking bootloader again was just a precautionary measure (proceed without it and if it is not 100% unlocked and if something goes wrong, we can troubleshoot later, which imo, won't happen)
And yep, if you keep the firmware as it is, but if you flash twrp and root, you will still see the update available in Hicare but will have to install stock recovery again before upgrading. (Nothing else is needed as SuperSU 2.62 gives a systemless root so you only need to flash back stock recovery for an update)
I am not against honor-tool bit it's best to do things manually as it makes you learn stuff and is easy to troubleshoot if something is amiss.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Alright, btw, about the thing you said
"Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again)."
I gotta do that myself with an "update.app" file or what?
Sorry, I missed that part
Cheers!
joaomPT said:
Alright, btw, about the thing you said
"Now you are set to try a 3 button update (sometimes it gets stuck so if it's stuck for 15 minutes, try 3 button again)."
I gotta do that myself with an "update.app" file or what?
Sorry, I missed that part
Cheers!
Click to expand...
Click to collapse
You have to make a dload folder in SD card and copy UPDATE.APP to that folder.
Then just turn off the phone, press and hold power + vol up + vol down until phone boots.
Let go of power but keep others two pressed for 5, 6 sec more. Your phone will boot into recovery and start installing UPDATE.APP
It likes to get stuck at 5% (most reports) but sometimes, somewhere else. If its stuck for 15 minutes on a particular percentage, just press and hold the above three buttons again using the same process.
Multiple tries make it work...
Sent from my PLK-L01 using XDA Labs
muradulislam said:
You have to make a dload folder in SD card and copy UPDATE.APP to that folder.
Then just turn off the phone, press and hold power + vol up + vol down until phone boots.
Let go of power but keep others two pressed for 5, 6 sec more. Your phone will boot into recovery and start installing UPDATE.APP
It likes to get stuck at 5% (most reports) but sometimes, somewhere else. If its stuck for 15 minutes on a particular percentage, just press and hold the above three buttons again using the same process.
Multiple tries make it work...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Hey man!
Good news, my phone is alive and root is done.
The problem was on the SuperSU that I flashed, it was version 2.71, instead of the one you said » version 2.62 «
I cant thank you enough!! Can I pay you a coffee?
Thank you!
joaomPT said:
Hey man!
Good news, my phone is alive and root is done.
The problem was on the SuperSU that I flashed, it was version 2.71, instead of the one you said �?�» version 2.62 �?�«
I cant thank you enough!! Can I pay you a coffee?
Thank you!
Click to expand...
Click to collapse
That's great... Enjoy your phone and as for coffee, well, let's say, you owe me one and we will leave it at that
Better yet, you can search DigiGoon and pay him for the coffee, he taught me what I told you.
You can find him somewhere in this thread
http://forum.xda-developers.com/honor-5x/help/honor-5x-kiw-ul00-boot-loop-t3449554/page1
Decision is yours
muradulislam said:
That's great... Enjoy your phone and as for coffee, well, let's say, you owe me one and we will leave it at that
Better yet, you can search DigiGoon and pay him for the coffee, he taught me what I told you.
Whichever you like...
Click to expand...
Click to collapse
Alright man, cheers
joaomPT said:
Alright man, cheers
Click to expand...
Click to collapse
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
tgergo said:
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
Click to expand...
Click to collapse
Hello.
Do you have unlocked bootloader and TWRP recovery? You can format your phone from TWRP recovery.
I think the only option for you is to get the old ROM img and flash it (starting from 0)
You can dirty-flash (Flash a different ROM with same android version as yours, e.g: flashing custom android 5 ROM over your stock android 5 ROM without factory resetting your phone) but I dont think you can do that from Android 6 to 5.
joaomPT said:
Hello.
Do you have unlocked bootloader and TWRP recovery? You can format your phone from TWRP recovery.
I think the only option for you is to get the old ROM img and flash it (starting from 0)
You can dirty-flash (Flash a different ROM with same android version as yours, e.g: flashing custom android 5 ROM over your stock android 5 ROM without factory resetting your phone) but I dont think you can do that from Android 6 to 5.
Click to expand...
Click to collapse
Yes I have unlocked bootloader and currently not twrp but I can flash it at any time.
The last two paragraphs you wrote are different solutions or the last one is a more detailed explanation of the previous?
I have android 6 so the later method won't work as you said.
But formatting it and flashing a stock android 5 rom - is it that simple? Nobody here suggested this before, however I have been asking for months.
All the phones are empty when they leave the assembly line.
How did you flash the new rom to your formatted phone? Extracted update.app and flashed each file with fastboot? Any issues you faced?
tgergo said:
Yes I have unlocked bootloader and currently not twrp but I can flash it at any time.
The last two paragraphs you wrote are different solutions or the last one is a more detailed explanation of the previous?
I have android 6 so the later method won't work as you said.
But formatting it and flashing a stock android 5 rom - is it that simple? Nobody here suggested this before, however I have been asking for months.
All the phones are empty when they leave the assembly line.
How did you flash the new rom to your formatted phone? Extracted update.app and flashed each file with fastboot? Any issues you faced?
Click to expand...
Click to collapse
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
joaomPT said:
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
Click to expand...
Click to collapse
I'll try... But seems too simple to be true...
joaomPT said:
From my last 2 paragraphs, the first was a solution, the second was an impossible alternative that I thought it would work.
My issue was that I had a custom recovery but I had no ROM installed, so I had to install the stock recovery and boot (extracting from update.app) and flashing it via fastboot, to afterwards force the update with 3-button method.
-----
What you'll need to do is:
- Flash TWRP
- Wype system, data, cache.. (so that you completely delete your current ROM)
- Extract recovery.img and boot.img from an update.app of an Android 5 ROM you'd like to have (Official ROM for your device model)
- Flash them via fastboot (You'll go back to stock recovery again)
- Shutdown your device
- Create a folder named "dload" on your sdcard and put UPDATE.APP file in it.
- Reboot
- Do the 3-Button update ([Vol+] + [Vol-] + Power)
- If it works, it will auto install
(- If it gets stuck on 5% for over 5/10min, force reboot pressing [Vol+] + Power) and try again the installation
- After installing it will boot normally (first boot takes a while)
NOTE: I'd recommend creading the dload folder before wiping the ROM, because usb didnt work for me afterwards. (It would still work if I was on recovery tho)
>> Remember to make a full system backup before wiping aswell, dont be stupid like me xD (thats why I had to full wipe my system after soft-brick)
Im answering based on what I did and was explained here to me
Click to expand...
Click to collapse
Hi again,
I'm doing this OS installation now. It starts fine but stucks at 90%, (I'm trying to install the latest stock ROM which can be downloaded from Huawei site, B220 or221). Did you have the same issue? I waited more than half an hour at 90% but did not go on.
tgergo said:
Hello
How did you format your phone?
I'm still struggling with going back to Android 5 and EMUI 3.1 since there is no rollback file available. (PLK-AL10, B396) Maybe formatting and installing the old rom could be a solution, like in your case?
Click to expand...
Click to collapse
Maybe formatting, Flash stock Android 5 recovery using Honor multitool , and then Flash a Android 5 firmware
Not sure it Will Work without rollback..
Finally, after 2 months of struggling I managed to get back to Android 5 and EMUI 3.1 without a rollback file.
Here is what I did:
0. Download a full ROM you want to install
1. Backup of the current system with Hisuite (everything. Apps, media, contacts, call log, etc.)
2. Flash TWRP recovery with fastboot (start phone in fastboot mode)
3. Wipe (and format!) everything you can with TWRP
4. Extract boot.img and recovery.img from update.app of the new ROM with Huawei Update Extractor
5. Flash boot.img and recovery.img with fastboot.
6. Copy update app to dload folder on SD card, insert into the phone.
7. Restart phone with [VOL+] + [VOL-] + [Power] buttons to force update.
8. The system will be installed from SD card. I had no issues with the installation. First I did not format the phone (just wiped) and it did not work.
9. Restore data from backup.
The only strange thing is that the native app icons look different than my previous lollipop system. Don't know why. They are less colorful. I installed C00B220 for PLK-AL10.
tgergo said:
Finally, after 2 months of struggling I managed to get back to Android 5 and EMUI 3.1 without a rollback file.
Here is what I did:
0. Download a full ROM you want to install
1. Backup of the current system with Hisuite (everything. Apps, media, contacts, call log, etc.)
2. Flash TWRP recovery with fastboot (start phone in fastboot mode)
3. Wipe (and format!) everything you can with TWRP
4. Extract boot.img and recovery.img from update.app of the new ROM with Huawei Update Extractor
5. Flash boot.img and recovery.img with fastboot.
6. Copy update app to dload folder on SD card, insert into the phone.
7. Restart phone with [VOL+] + [VOL-] + [Power] buttons to force update.
8. The system will be installed from SD card. I had no issues with the installation. First I did not format the phone (just wiped) and it did not work.
9. Restore data from backup.
The only strange thing is that the native app icons look different than my previous lollipop system. Don't know why. They are less colorful. I installed C00B220 for PLK-AL10.
Click to expand...
Click to collapse
Is this really work? i cant rollback to any version.
Yuaru said:
Is this really work? i cant rollback to any version.
Click to expand...
Click to collapse
Yes it does. (It did for me.) Technically this is not a rollback but installing a brand new system on an empty phone. That's why it is important to do a backup upfront.
tgergo said:
Yes it does. (It did for me.) Technically this is not a rollback but installing a brand new system on an empty phone. That's why it is important to do a backup upfront.
Click to expand...
Click to collapse
Thanks for the answer. Im gonna try this method. I can't reflash any region rom.
Hello there
I've tried it for a while now: Getting a working recovery on Paranoid Android 6 (MM). As it seems, Marshmellow has some problems in general with rooting etc.
Back some time, i've had some troubles getting the Stock MM rootet and a working custom recovery installed. But with this thread, it worked: https://forum.xda-developers.com/xperia-z2/general/stock-t3355768
But on Paranoid Android, it bricked my phone. (Black screen and flashing LED)
So I tried:
https://forum.xda-developers.com/z3/general/wip-sony-android-6-0-mm-t3337357 (flashing the .zip and execute the .bat on Windows). No effect, can't boot into Recovery (either over the Volume buttons or the "reboot menu")
and then again a "modified" version of TWRP, but I can't find the thread to this anymore. However, this file took no effect too. I'd make an attachment with the file, but i can't as it seems.
Then I flashed the official TWRP .img from their webiste and the phone bricked again. The same happened with this: https://forum.xda-developers.com/xperia-z2/general/twrp-recovery-collection-t2999078
Now I'm on Stock again (and Bootloader locked ), but my goal is to get my phone google-free and as much opensource as possible. So, is it possible to get a working recovery on the newest Paranoid Android or do I have to downgrade back to PA 5? Or do you have a recommendation for another, more actual, Custom-Rom? I liked PA 4 and 5, so I'd like to install 6 too.
What did I miss in this mayhem of threads, scripts and files?
Thanks for the help
Try to flash by fastboot twrp 3.0.0 from rcstar6696, https://mega.nz/#F!TRRjgICI!D4WON2JY7Lunrx7W-LSaww!uVoB0TYL
Make sure you typed "fastboot flash recovery..." not "fastboot flash boot..." in cmd.
DiogoSilva48 said:
Try to flash by fastboot twrp 3.0.0 from rcstar6696, https://mega.nz/#F!TRRjgICI!D4WON2JY7Lunrx7W-LSaww!uVoB0TYL
Click to expand...
Click to collapse
Thanks for the answer, but unfortunately it doesn't work too. (I turned off the device. Hold Vol-Up, plugged the phone an ran the command: "fastboot flash recovery twrp-3.0.0-0-sirius.img". CMD says it's all okay)
The phone didn't brick, but i can't boot into TWRP. (May I ask, where you got this modified TWRP from?). The phone doesn't give me even the opportunity to press a volume-button. After the Sony Logo, AOSPA boots without a little vibration or flashing LED (like it did before on Stock or AOSPA 5). And if I try to "force" a reboot into recovery from the advanced reboot menu, the phone stays completely black and I've to wait some time, until I can turn it on again. (Happens too, if I press vol-up/down all the time)
I did some research and found some threads, which were about Custom-Kernels like "advanced kernel" or "DooMLoRD". Perhaps I have to do something with these? (example: https://forum.xda-developers.com/xperia-z2/development/kernel-advanced-stock-kernel-t3347413 )
I ask myself, why this doesn't work "out of the box". In AOSPA 5, there weren't any troubles. But since Marshmellow, custom ROMs and Stock-ROMs seem to have many problems (with customization).
Any Idea, why the official TWRP aren't running "out of the box"? Or why it only doesnt work for me, since it seems that I'm the only one with these problems.
EDIT:
I got it!!! I flashed the official TWRP 3.0.2-0 from their website via fastboot. With the advanced reboot menu from AOSPA i managed to boot into TWRP. (But i can't boot into it with the volume-buttons, which is kinda sad for a "recovery menu". Any ideas, how i manage to get this working? Because, if the phone doesn't boot anymore I can't access TWRP... :/
So I bought a stock Xperia Z5 Compact E5823 on which I want to use LinageOS. I managed to set up Cyanogenmod and, later, LinageOS on my previous two phones, but I am not very confident about what I am actually doing, so please excuse if I express myself unclear or if I lack basic understanding. My main problem is that I cannot access recovery mode, neither via volume-down + power-button, nor via ADB.
Phone info: Android version 5.1.1, Kernel version 3.10.49-perf-g6b847e2, Build no. 31.0.A.4.11 (do you need something else?)
I followed the LinageOS guide: https://wiki.lineageos.org/devices/suzuran/install but I fail to flash TWRP.
I unlocked the bootloader, I am able to access my phone using ADB (I'm on a Linux machine) and I can boot into fastboot mode. There I should be able to flash a TWRP recovery in order to flash LinageOS, but if I do, nothing changes.
At first I tried the newest TWRP version (3.2.1): https://forum.xda-developers.com/crossdevice-dev/sony/twrp-3-1-0-z5-z5c-z5p-t3571050 - is this version even compatible?
When running fastboot flash recovery <twrp321-recovery.img>, it says target didn't report max-download-size (what does that mean?) and finishes without errors. However, booting to recovery is not working, the phone just boots normally.
When running fastboot boot <twrp321-recovery.img>, it says FAILED (remote: dtb not found) (what's "dtb"?)
Trying around with different TWRP versions, I found that version 2.8.something works for booting (fastboot boot recovery.img), so I end up in TWRP, but flashing this recovery still does not work, as above: Max-download-size note, no errors, no recovery mode, just normal boot.
I did several factory resets and tried to flash LinageOS using the booted recovery, but then it says something about missing partitions that I don't understand (I could do it again if this information is useful).
Generally: Shouldn't I be able to boot into recovery mode, irrespective of what I did? I did not try it before I started messing around, so I do not know if it had worked out of the box ...
Could I have accidentally messed up my recovery mode? Maybe when I tried to flash TWRP 3.2.1? If so, how do I revert this - how do I set up a working recovery? Do I need to erase/wipe anything specific? I fear bricking this phone ...
I also tried around with FlashTool (https://xperiafirmware.com/), trying to set up a new kernel, thinking that TWRP might need that, but I seem to be too unacquainted with Android OS architecture for this - actually, I do not even know what exactly a kernel is ...
Thank you very much in advance
Fred
fredduh said:
So I bought a stock Xperia Z5 Compact E5823 on which I want to use LinageOS. I managed to set up Cyanogenmod and, later, LinageOS on my previous two phones, but I am not very confident about what I am actually doing, so please excuse if I express myself unclear or if I lack basic understanding. My main problem is that I cannot access recovery mode, neither via volume-down + power-button, nor via ADB.
Phone info: Android version 5.1.1, Kernel version 3.10.49-perf-g6b847e2, Build no. 31.0.A.4.11 (do you need something else?)
I followed the LinageOS guide: https://wiki.lineageos.org/devices/suzuran/install but I fail to flash TWRP.
I unlocked the bootloader, I am able to access my phone using ADB (I'm on a Linux machine) and I can boot into fastboot mode. There I should be able to flash a TWRP recovery in order to flash LinageOS, but if I do, nothing changes.
At first I tried the newest TWRP version (3.2.1): https://forum.xda-developers.com/crossdevice-dev/sony/twrp-3-1-0-z5-z5c-z5p-t3571050 - is this version even compatible?
When running fastboot flash recovery <twrp321-recovery.img>, it says target didn't report max-download-size (what does that mean?) and finishes without errors. However, booting to recovery is not working, the phone just boots normally.
When running fastboot boot <twrp321-recovery.img>, it says FAILED (remote: dtb not found) (what's "dtb"?)
Trying around with different TWRP versions, I found that version 2.8.something works for booting (fastboot boot recovery.img), so I end up in TWRP, but flashing this recovery still does not work, as above: Max-download-size note, no errors, no recovery mode, just normal boot.
I did several factory resets and tried to flash LinageOS using the booted recovery, but then it says something about missing partitions that I don't understand (I could do it again if this information is useful).
Generally: Shouldn't I be able to boot into recovery mode, irrespective of what I did? I did not try it before I started messing around, so I do not know if it had worked out of the box ...
Could I have accidentally messed up my recovery mode? Maybe when I tried to flash TWRP 3.2.1? If so, how do I revert this - how do I set up a working recovery? Do I need to erase/wipe anything specific? I fear bricking this phone ...
I also tried around with FlashTool (https://xperiafirmware.com/), trying to set up a new kernel, thinking that TWRP might need that, but I seem to be too unacquainted with Android OS architecture for this - actually, I do not even know what exactly a kernel is ...
Thank you very much in advance
Fred
Click to expand...
Click to collapse
Hi Fred,
while searching for a similar (or maybe the same) problem on my new Z5 compact I came across your post.
I was trying to install LineageOS and therefore started with TWRP 3.2.1 linked from the LineageOS installation manual(link)
It failed. Many times. The only workaround was booting to recovery mode with the phone booted to stock rom via:
Code:
adb reboot recovery
but NOT ONCE it worked with the given key combination. Trying to install LineageOS from that resulted in a completely unusable phone, not even showing the sony logo on boot.
What helped my was flashing the phone with the sony tool "emma" with the latest custom rom (for me 32.4.A.0.160). Whatever magic this does (firmware upgrade maybe), it brought my device back to live and now I can install and boot into TWRP recovery, installed LineageOS.
You can do so by
1 installing and starting emma, just follow screen instructions
2 activate developer mode (tapping on the build number 7 multiple time (under settings/about phone)
3 activate adb debugging under settings/developer settings and authorize phone
4 power off the phone
5 connect the phone to the pc
6 press and hold volume down button until the led becomes green
The device will appear in Emma and you can flash it back to life.
Let me know how it worked for you,
Frank
This afternoon I installed LineageOS and all was well with the world. I then installed TWRP as I wanted to install Magisk and the EMUI camera. However, it then started bootlooping and nothing I've tried seems to be working.
I can get into Fastboot and it lets me flash stuff, but nothing boots. I tried the unbricking guide as well, but none of the three files work - I get a "No space left on device" error for each of the files.
If anyone can provide me with an idiot's guide to sorting this I'll be massively grateful.
nea102 said:
This afternoon I installed LineageOS and all was well with the world. I then installed TWRP as I wanted to install Magisk and the EMUI camera. However, it then started bootlooping and nothing I've tried seems to be working.
I can get into Fastboot and it lets me flash stuff, but nothing boots. I tried the unbricking guide as well, but none of the three files work - I get a "No space left on device" error for each of the files.
If anyone can provide me with an idiot's guide to sorting this I'll be massively grateful.
Click to expand...
Click to collapse
Hi, look at this perhaps it can help you
https://forum.xda-developers.com/ma...e-10-flash-oreo-update-package-t3716814/page3
I had used that guide, was following that when I was getting the out of space errors.
However, I got it all sorted in the end - I just downloaded a different (older) version of the firmware and that worked.
Help for you
samlis said:
Hi, look at this perhaps it can help you
https://forum.xda-developers.com/ma...e-10-flash-oreo-update-package-t3716814/page3
Click to expand...
Click to collapse
Hi good day.
I have been following your work from another page, and now in XDA.
I had not read your message, and, I changed the recovery for the stock, and, I was an idiot to close the bootloader.
What happened? Brick simple on my cell phone, did not come out (because I fixed it) of the image of erecovery (EMUI) without tabs or options, a rather rare image.
How do I solve it:
1. I did not enter fastboot, I did not correctly enter the stock recovery (I had deleted the twrp), I had closed the bootloader (my stupidity)
2. Be patient and wait for the battery to run out (wait a day for it).
3. Open cmd and place the command to open the bootloader (fastboot oem unlock) and execute.
4. Put the device in fastboot mode when connecting to the laptop (I did not work several times, the fastboot came out with error FUNC No 10 and NO 2), after numerous attempts and not to let it charge the battery too much (because it was restarted and towards brick in the EMUI logo), correctly enter the fastboot and unlock, when you enter step 3 automatically, it will be executed. I had an advance in removing the cell phone from the brick.
5. It reboots and wonderfully happened to the Rom (that had previously installed), that is to say, the erase was not executed when the bootloader had previously closed.
6. As I had little energy, it was turned off, but I connected it and entered charging mode without restarting (before I did it).
7. Wait for a load of at least 5%, and install the Catuva21 TWRP from the tutorial.
8. I put it by command to restart in fastboot, but I generate error (Error Func No 10 and No 2).
9. I turn off the cell phone and with volume up and power key
10. Enter the TWRP correctly, verify that it is installed.
11. Restart system and log in to the system. I had not deleted anything, but to avoid problems, I hope to load 55% and execute the steps to install the rom.
12. Enjoy and dry spilled tears.
Experience lived and I hope you do not do something that developers do not advise.
Grcias and happy day.
Hi all,
Although my device isn't Mate 9 (mine is Nova 2s a.k.a HWI-AL00), but i'll share my experiece here.
Since EMUI8.0 Oreo, it's becoming more and more tough to get back to oreo stock after you mess/brick your device, maybe that's why HW plan to shutdown their bootloader unlock page.
Couple days ago, i got bored with my Nova 2s stock, and try to mess around to get root.
After flashing twrp (of course my bootloader is unlocked) and using modded rom which already contains magisk, i decided i want to go back to stock again, since the modded rom is not good to use.
This is where all the hassle began...
Maybe my most stupid move was, i formatted all partitions listed in twrp (so many partitions i can't remember).
After few days crying and try to find solutions, today i get to the point where it can download the rom package from HW ERecovery interface.
What i'm doing :
- download full package rom, extract the zip, and extract the *.app file using HuaweiUpdateExtractor, now you can see many *.img's there
- enter fastboot and flash twrp and boot into twrp
- flash these images : system.img into system partition, vendor.img into vendor partition
- exit twrp and get into fastboot again
- fastboot flash these images : kernel.img into kernel partition, ramdisk.img into ramdisk partition, recovery_ramdis.img into recovery_ramdisk partition
- shutdown device and let it boot normally
- it boot into HW eRecovery, and there's a menu to download rom full update package from server, i choose those menu (to download it, you must connect the device to wifi connection)
now i'm still waiting for the result, hopefully when the download finished, it can flash those packages nicely, i'll update the information to you guys later.
heindrix said:
Hi all,
Although my device isn't Mate 9 (mine is Nova 2s a.k.a HWI-AL00), but i'll share my experiece here.
Since EMUI8.0 Oreo, it's becoming more and more tough to get back to oreo stock after you mess/brick your device, maybe that's why HW plan to shutdown their bootloader unlock page.
Couple days ago, i got bored with my Nova 2s stock, and try to mess around to get root.
After flashing twrp (of course my bootloader is unlocked) and using modded rom which already contains magisk, i decided i want to go back to stock again, since the modded rom is not good to use.
This is where all the hassle began...
Maybe my most stupid move was, i formatted all partitions listed in twrp (so many partitions i can't remember).
After few days crying and try to find solutions, today i get to the point where it can download the rom package from HW ERecovery interface.
What i'm doing :
- download full package rom, extract the zip, and extract the *.app file using HuaweiUpdateExtractor, now you can see many *.img's there
- enter fastboot and flash twrp and boot into twrp
- flash these images : system.img into system partition, vendor.img into vendor partition
- exit twrp and get into fastboot again
- fastboot flash these images : kernel.img into kernel partition, ramdisk.img into ramdisk partition, recovery_ramdis.img into recovery_ramdisk partition
- shutdown device and let it boot normally
- it boot into HW eRecovery, and there's a menu to download rom full update package from server, i choose those menu (to download it, you must connect the device to wifi connection)
now i'm still waiting for the result, hopefully when the download finished, it can flash those packages nicely, i'll update the information to you guys later.
Click to expand...
Click to collapse
Can you link here the twrp file that work for you? i have mate 10 pro (bla-l29) and i tried couple versions and none of them work well. thenks
yoni sofer said:
Can you link here the twrp file that work for you? i have mate 10 pro (bla-l29) and i tried couple versions and none of them work well. thenks
Click to expand...
Click to collapse
take a look here, mate.
https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904