Hello i have a Galaxy S5 G900A running 5.0 lollipop. But after flashing xposed.zip through flashfire my phone shows AT&t logo for a while and then power off. I try to flash through odin but each Time get these error. I have tried Downgrade-to-NEC, Stock 4.4.2 firmware but it not flashing it just giving me these errors
Odin logs
<ID:0/020> Added!!
<ID:0/020> Odin engine v(ID:3.1100)..
<ID:0/020> File analysis..
<ID:0/020> SetupConnection..
<ID:0/020> Initialzation..
<ID:0/020> Set PIT file..
<ID:0/020> DO NOT TURN OFF TARGET!!
<ID:0/020> Get PIT for mapping..
<ID:0/020> Firmware update start..
<ID:0/020> SingleDownload.
<ID:0/020> boot.img
<ID:0/020> NAND Write Start!!
<ID:0/020> recovery.img
<ID:0/020> system.img.ext4
<ID:0/020> FAIL! (Auth)
<ID:0/020>
<ID:0/020> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On phone
SW-Rev Check fail: Refer 3 > Binary 1
Secure check fail: System
I am facing this problem for more than a week so kindly give me the solution for this.
Related
There is stock ROM i9100XXKP1 from samfirmware.
And the zip contains 4 files
Code:
I9100_APBOOT_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar.md5
I9100_CODE_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar.md5
I9100_KERNEL_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar.md5
MODEM_I9100XXKP1_REV_02_CL1085642.tar.md5
Inside the I9100_CODE_I9100XXKP2_CL17109_REV02_eng_mid_ship.tar.md5,it contains file as follow
Code:
cache.img
data.img
factoryfs.img
hidden.img
zImage
I modified the zImage, and make a tar package.
then I use odin to flash it by PDA option, however I got fail
Fail log:
Code:
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> PDA/cache.img
<ID:0/010> NAND Write Start!!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
after this,i restore zImage,and i modified the factoryfs.img
but the same as before....
please help me ~!!
sorry for my bad english
i tried to update my i9300 but everytimes odin gives error
<ID:0/169> Added!!
<ID:0/169> Odin v.3 engine (ID:169)..
<ID:0/169> File analysis..
<ID:0/169> SetupConnection..
<ID:0/169> Initialzation..
<ID:0/169> Get PIT for mapping..
<ID:0/169> Firmware update start..
<ID:0/169> boot.img
<ID:0/169> NAND Write Start!!
<ID:0/169>
<ID:0/169> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
no matter what usb port i use....i also try odin 3.0.4 and 1.8.5 but same error...phone cannot boot or go into recovery ..just in download mode..plz help
BaCkkk said:
i tried to update my i9300 but everytimes odin gives error
<ID:0/169> Added!!
<ID:0/169> Odin v.3 engine (ID:169)..
<ID:0/169> File analysis..
<ID:0/169> SetupConnection..
<ID:0/169> Initialzation..
<ID:0/169> Get PIT for mapping..
<ID:0/169> Firmware update start..
<ID:0/169> boot.img
<ID:0/169> NAND Write Start!!
<ID:0/169>
<ID:0/169> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
no matter what usb port i use....i also try odin 3.0.4 and 1.8.5 but same error...phone cannot boot or go into recovery ..just in download mode..plz help
Click to expand...
Click to collapse
what was the rom before flashing? and what is the f/w that you are flashing now?
i got this phone from my friend and he is noob ..he tried to flash a rom but dont know which on..right now im flashing KIES_HOME_I9300XXEMB5_I
NAND might be damaged or partition struture damaged/corrupt.
Try this rescue firmware:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
If that doesn't work you'll probably need a service centre.
I tried up rom for galaxy note 10.1 N8000. But i have error. Please help me!!!!!!!!!!
D:0/018> Added!!
<ID:0/018> Odin v.3 engine (ID:18)..
<ID:0/018> File analysis..
<ID:0/018> SetupConnection..
<ID:0/018> Initialzation..
<ID:0/018> Get PIT for mapping..
<ID:0/018> Firmware update start..
<ID:0/018> boot.img
<ID:0/018> NAND Write Start!!
<ID:0/018> cache.img
<ID:0/018> hidden.img
<OSM> All threads completed. (succeed 0 / failed 1)
Hi, everyone
I got a problem after giving phone to Chinese Service (NOT official)... the reason was a broken window (or touchscreen im not really sure)... and now nothing works: NO wifi, NO ime, NO call or msg, NO video - nothing..... the strangest thing is that the whole memory was fulled by unknown "other files". every time when i try to setup firmware I get this error:
Code:
<ID:0/012> Added!!
<ID:0/012> Odin engine v(ID:3.1005)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> SingleDownload.
<ID:0/012> system.img.ext4
<ID:0/012> NAND Write Start!!
<ID:0/012> recovery.img
<ID:0/012> hidden.img.ext4
<ID:0/012> FAIL! (Ext4)
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help, I can't keep it anymore, i already spent for it 2 days.. so please HEELP!!!!
So I'm trying to get Magisk on my US S10+, and I get my firmware from here (G975USQU1ASBA). I use the modified Odin that it tells me to use, I put my phone in download mode, I place all the file that I need to in Odin, and here's what I get:
Code:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> skip file list for home binary
<ID:0/006> persist.img.ext4
<ID:0/006> carrier.img.ext4
<ID:0/006> dqmdbg.img.ext4
<ID:0/006> Home Binary Download
<ID:0/006> Total Binary size: 7423 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> abl.elf
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On my phone I get some text in red saying: SW REV CHECK FAIL : [abl]Fused 2 > Binary 1
How can I fix this? Help would be appreciated.