i have install remix os on usb stick i use it on acer aspire one zg5 .. i want to connect to an external monitor with vga cable but no signal can you help me ???
xhostluv said:
i have install remix os on usb stick i use it on acer aspire one zg5 .. i want to connect to an external monitor with vga cable but no signal can you help me ???
Click to expand...
Click to collapse
You're probably looking at video=*** stuff added to grub. But first press ALT&F1; press dmesg then unplug/replug external monitor a few times to check if the system picks it up; check with dmesg again.
Related
Hy everyone!
I have problem with my samsung galaxy tab P7500..it wont recognize my usb. in notification bar shows that is connected but it is not. there is no folder od something with my usb staff. it worked fine, and then just stopped. i dont know why
before, when i connected usb, tab opened a folder of usb, but now nothing..
did i miss something? where did i get wrong??
please heelp!!
P.S. sorry for my english
Switch to a different USB port. It seems like a stupid answer, but it is a common problem. Switching from the form factor USB ports (front panel) to the board mounted ports (rear panel) or visa-verse often works.
i know this may be an old post but here goes, i have the same problem, my PC tells me that the drivers for my tab are installed but i can not see it in my PC.
i connected it to different USB ports but still i can not see it.
i tried turning the debugging on/off still to no successes.
7500 tab, cyanogenmod 4.0.4 (9 nightly )
nobody850 said:
i know this may be an old post but here goes, i have the same problem, my PC tells me that the drivers for my tab are installed but i can not see it in my PC.
i connected it to different USB ports but still i can not see it.
i tried turning the debugging on/off still to no successes.
7500 tab, cyanogenmod 4.0.4 (9 nightly )
Click to expand...
Click to collapse
Try unistalling kies and the Samsung drivers, restart the pc and just install the driver. See if that works.
Sent from my GT-P7510 using XDA Free mobile app
i don't have kies and i have uninstalled the samsung drivers, restarted my PC but still nothing.
nobody850 said:
i don't have kies and i have uninstalled the samsung drivers, restarted my PC but still nothing.
Click to expand...
Click to collapse
Okay, I just googled your problem... Try removing the device from device management (sorry, it was a Dutch site, translation might be different) in Windows. Then reconnect it.
Sent from the mini galaxy in my hands! ?
Olivier V said:
Okay, I just googled your problem... Try removing the device from device management (sorry, it was a Dutch site, translation might be different) in Windows. Then reconnect it.
Sent from the mini galaxy in my hands! ?
Click to expand...
Click to collapse
i did that on 2 different pc's and still the same problem.
nobody850 said:
i did that on 2 different pc's and still the same problem.
Click to expand...
Click to collapse
Then I only have 2 more options available before I run out of ideas.
1) did you enable mtp under the storage options on your tab?
2) your USB cable might be defective. Try a different cable.
Sent from the mini galaxy in my hands! ?
Olivier V said:
Then I only have 2 more options available before I run out of ideas.
1) did you enable mtp under the storage options on your tab?
2) your USB cable might be defective. Try a different cable.
Sent from the mini galaxy in my hands! ?
Click to expand...
Click to collapse
it is working.
thank you
enable mtp under the storage options on your tab
nobody850 said:
it is working.
thank you
enable mtp under the storage options on your tab
Click to expand...
Click to collapse
Ah, great! I'm glad I could help
Hi
Hope somebody could help me.
my tab is p7500. official ics and rooted. i try to connect usb otg and it working by showing "USB connector connect" .
I can connect it with 1gb flash drive. But when i connect with 2 gb flash drive or higher, the tab will show "High-power usb device connected. cannot access to this device".
why it show like that? is the tab only can access flash drive with 1gb memory and below? or there is some setting that need to be done if want to connect with higher than 1gb flash drive?
Please see the picture attach...
tamhar said:
Hi
Hope somebody could help me.
my tab is p7500. official ics and rooted. i try to connect usb otg and it working by showing "USB connector connect" .
I can connect it with 1gb flash drive. But when i connect with 2 gb flash drive or higher, the tab will show "High-power usb device connected. cannot access to this device".
why it show like that? is the tab only can access flash drive with 1gb memory and below? or there is some setting that need to be done if want to connect with higher than 1gb flash drive?
Click to expand...
Click to collapse
i don't think that the p7500 supports more than 1gb of memory. i don't think that i have a flash drive in my p7500.
nobody850 said:
i don't think that the p7500 supports more than 1gb of memory. i don't think that i have a flash drive in my p7500.
Click to expand...
Click to collapse
thanks nobody850
i thought i could watch videos on my tab by using flash drive since now days videos [email protected] are more than 1gb especially with hd..so i don't have to connect my tab to [email protected] seems like i have to follow the usual way...
tamhar said:
Hi
Hope somebody could help me.
my tab is p7500. official ics and rooted. i try to connect usb otg and it working by showing "USB connector connect" .
I can connect it with 1gb flash drive. But when i connect with 2 gb flash drive or higher, the tab will show "High-power usb device connected. cannot access to this device".
why it show like that? is the tab only can access flash drive with 1gb memory and below? or there is some setting that need to be done if want to connect with higher than 1gb flash drive?
Please see the picture attach...
Click to expand...
Click to collapse
I can't believe that the p7500 wouldn't support flash memory over 1gb. I've heard of people using a USB hub that has it's own power supply for OTG.
---------- Post added at 12:49 PM ---------- Previous post was at 12:42 PM ----------
tamhar said:
thanks nobody850
i thought i could watch videos on my tab by using flash drive since now days videos [email protected] are more than 1gb especially with hd..so i don't have to connect my tab to [email protected] seems like i have to follow the usual way...
Click to expand...
Click to collapse
I like to just share a PC drive or folder on my network, then us ES File Explorer to find the video on your network and stream it over wifi to MX player on the droid. It's a little technical to set up, but a good thing to know.
I have a NT 16 gb from stock with my smartphone usb cable but not the charger.
I connect the usb cable to an international adapter via its usb port so I think I get 1.6A: and judging by how fast I charge the NT, I would say it is right.
I want cm10.2 or cm11 [preferably of course] but I cannot install cwm.
I cannot get usb debugging on by downloading an apk and lunching it: I must choose between the app installer or the package installer and then get the error: only from NB we can install apk's, great.
I have 1micro sdhc class 4 of 4gb and one class4 16gb, none of them permits to boot up which incredibly sucks, idk why.
I configure them with minitool, 300mb space, and my put img of cwm 6.0.4.6.
Every time I end up with the reset factory choice from NB after I perform pwr+home then power alone; whether I connect the nt to the power adapter or not.
When I connect the nt to windows, it is seen only as a drive.
ADB does not recognize the device of course.
Is there a way to install CM ? without a bootable SD ?
This is unbelievably frustrating and since I am a complete noob to android and all that, pls level with me
this guide is quite helpful: http://wiki.cyanogenmod.org/w/Install_CM_for_acclaim
if i were you i'd throw the ROM and Gapps that you want on the internal storage if you can get into USB mode, then look at this and use this guide to flash CM: http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14
yeah it says how to root stock firmware but it's the same process, just different zip files.
yes I have seen the wiki and I am stuck at Boot to recovery mode since my nook always shows the BN recovery:
from your second link, it is this line
You will see a picture of N on the screen followed by a box with a white background followed by CWM booting up.
CWM does not boot. Is it possible that the problem is from the SD cards ?
I tested a sandisk 32gb class10, it still shows the factory reset screen
Regarding the USB mode, the NT says I must install the apks from BN only, so I do not not know how to active it.
i'm assuming you know how to connect the tablet to a computer... try that.
blue whale said:
I have a NT 16 gb from stock with my smartphone usb cable but not the charger.
I connect the usb cable to an international adapter via its usb port so I think I get 1.6A: and judging by how fast I charge the NT, I would say it is right.
...
Is there a way to install CM ? without a bootable SD ?
This is unbelievably frustrating and since I am a complete noob to android and all that, pls level with me
Click to expand...
Click to collapse
Have you tried the method outlined at http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163?
Note that many NT will boot off SD only from power-off state and upon insertion of a powered USB cable (regular mini-USB cable connected to PC or powered USB Hub should work fine).
Success CM11 is installed \0/; My partition was of type 0b not 0c...
I do have a problem now when I plug in the tablet on windows xp sp3: windows cannot find the drivers with or without debugging on.
Is it possible to see the device as a storage space in general and also being recognized by adb when debugging is on {i believe it is how this work, is it not ?} ?
blue whale said:
Success CM11 is installed \0/; My partition was of type 0b not 0c...
I do have a problem now when I plug in the tablet on windows xp sp3: windows cannot find the drivers with or without debugging on.
Is it possible to see the device as a storage space in general and also being recognized by adb when debugging is on {i believe it is how this work, is it not ?} ?
Click to expand...
Click to collapse
By default the NT should automatically show up as an MTP device when plugged in via USB.
You only need to enable USB debugging when using adb access over USB.
digixmax said:
By default the NT should automatically show up as an MTP device when plugged in via USB.
You only need to enable USB debugging when using adb access over USB.
Click to expand...
Click to collapse
Well, via a software, I removed all the usb drivers connected to an android tablet. Then, the first time I plug in the NT, I have an OMAP443 install [for I do have these drivers] and windows then searches for the "BN NT" but cannot find the drivers. It's quite puzzling.
For the MTP, as far as I understand, I must install windows mediaplayer 11, is there not an alternative >?
blue whale said:
Well, via a software, I removed all the usb drivers connected to an android tablet. Then, the first time I plug in the NT, I have an OMAP443 install [for I do have these drivers] and windows then searches for the "BN NT" but cannot find the drivers. It's quite puzzling.
Click to expand...
Click to collapse
Did you switch the NT to USB mode (Settings->Storage->Settings->UMS)?
For the MTP, as far as I understand, I must install windows mediaplayer 11, is there not an alternative >?
Click to expand...
Click to collapse
MTP on Win PC requires Windows Media Player 10 or later.
it did work after disabling the debuging
Hi,
I can't connect with ethernet on my Remis OS USB key. Do you know if there is a solution?
Thanks
Mine works on my home pc.
NIC card built into Asus m5a97 motherboard. Usb drive boot
Brian
reliant_turbo said:
Mine works on my home pc.
NIC card built into Asus m5a97 motherboard. Usb drive boot
Brian
Click to expand...
Click to collapse
It doesn't work in my PC as well.
Same here, my Board has 2 onboard NICs. in ethernet settings RemixOS shows some (random?) MAC-Adress witch doesn't belong to any of them.
Ethernet not working
It does not work im my pc as well
Hey guys,
I installed the latest Remix onto a separate partition so I can dual-boot on my Windows 7 machine.
It seems to work fine, I guess. Detects my cheap little USB wifi adapter, at least. But it will not detect my Android phone when connected to PC via USB. Now I'm sure this is due to lack of Android-to-Android wired interface, and someone will probably recommend an OTG cable, but honestly, is there any way of forcing Remix OS to detect USB connection from an Android phone?
I have a kate SD with resurection remix on android 7.1.
I have
-a cable micro USB-USB female
-this RJ45 adapter + USB 3.0 ports
https://www.amazon.com/UGREEN-Ethernet-1000Mbps-Nintendo-Chromebook/dp/B00LLUEJFU
[in the comments, people make it work on android TV but a guy with samsung tabalet has no rj45]
=>WHen I plug a wifi mouse in the cable micro USB-USB female, the mouse is detected
=>When I plug the USB Hub+rj45 adpater+cable, I do not get a ethernet connection, but I do get the wifi mouse. I tried with PLANE MODE and without. WIFI is OFF.
THe USB hub+rj45 works well on windows. How do I get it to work on android ?
THe driver for android+linux is here http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=131;71;112 How can I install it on my phone?
blue whale said:
I have a kate SD with resurection remix on android 7.1.
I have
-a cable micro USB-USB female
-this RJ45 adapter + USB 3.0 ports
https://www.amazon.com/UGREEN-Ethernet-1000Mbps-Nintendo-Chromebook/dp/B00LLUEJFU
[in the comments, people make it work on android TV but a guy with samsung tabalet has no rj45]
=>WHen I plug a wifi mouse in the cable micro USB-USB female, the mouse is detected
=>When I plug the USB Hub+rj45 adpater+cable, I do not get a ethernet connection, but I do get the wifi mouse. I tried with PLANE MODE and without. WIFI is OFF.
THe USB hub+rj45 works well on windows. How do I get it to work on android ?
THe driver for android+linux is here http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=131;71;112 How can I install it on my phone?
Click to expand...
Click to collapse
You will need to include this in android kernel and then flash that kernel. First learn how to compile kernel, then learn adding additional drivers and then compile your own kernel.