I have tried everything on YouTube videos and on other forums, and nothing has worked so far... This is what has happened:
1) I flashed a custom font zip file, which I later realised was only for the HTC One M8
2) As phone rebooted, got stuck at the "glowing" Samsung logo (the 3rd one, after the model number and the jingle)
3) Phone stuck at that logo, have tried LOADS OF METHODS and nothing has worked
Please help!
PS - I am new to these things and have rarely "dabbled" in this kind of stuff, all I've done so far (which worked fine) is root my phone, install CWM Recovery, install a modded version of Android 4.3 (?) which was designed to make your phone run faster (which it did). Please help! Have I broken my phone?! :crying:
Search for the latest stock ROM for your phone on sammobile.com and flash the ROM using Odin.
Some good info here too: http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125
If you have a btu device :https://drive.google.com/folderview?id=0B4vTiHTBB629ZW5vQndpbjFnblk
Beamed in by telepathy.
Related
my phone is a samsung galaxy s2 which was is branded to orange.
i have recently updated from android 2.4.6 to the new android 4.0.3 through kies.
i was really wanting to just root my device but for the time being leave the current rom on, i mainly wanted to uninstall blatware for now and backup etc...
anyway things have gone a bit wrong, i tried following the beginners guide on the following url:
http://forum.xda-developers.com/showthread.php?t=1056334
i downloaded the files that it tells you to, i opened odin and selected the XWKDD file as it says to and it said that the root was sucessful, but my phone didn't fully reboot, it went off and come onwith the samsung galaxy s2 logo and a yellow ! under it, and now it just stays on that and wont do anything else
have i ruined my phone or can it be fixed without losing any of my data or the way i had my phone?
any really fast help would be great, id love to sort this tonight if i can.
thanks in advance
james
Try reflashing stock android 4
Sent from my GT-S5660
i have just found the stock fw that orange released will try and flash it with odin now.
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good:
I had recently found out how to root my Galaxy S3 specificly the Sprint model since then I was messing with Xposed, and a few specific Modules having to do with the UI I encountered a UI crash when I rebooted the first time, then after that I attempted to wipe the device thinking that would fix the issue only to have it not boot into the device instead stick at the boot screen (I cant share links yet or Id show an image) I have flashed the Clockwork Mod Recovery tool into the device which worked I have access to Odin and CWM I just don't know how to fix this issue and it only looks like I make things worse if I try to look it up myself does anyone know what I should do???
Edit
I managed t get the device running by finding the original firmware update zip on the samsung website then ran it throught adb the situation resolved itself thanks though.