I have a Sprint S6 Edge. I recently used CF Auto-Root and TWRP, but I must have done something wrong (probably the wrong version) because now I'm stuck on the boot screen with the red message "Recovery is Not Seandroid Enforcing." The volume up-home-power combination to take into recovery mode does nothing, only the volume down-home-power combination works, taking me to the download mode. I have tried flashing my stock rom in download mode but it says failed. The same screen comes up when I restart from download mode. I've looked around and I think it's called a Recovery is Not Seandroid Enforcing Bootloop, but I couldn't find a solution that worked for it. Do you have any suggestions?
Related
[Q] Recovery Booting Recovery is not seandroid enforcing set warranty bit Recovery
I tried rooting my note 3, sprint version, using odin v3.07 and the program crashed in the middle of installing and when it started working again it said "RESET" instead of "PASS", now my phone keeps rebooting saying:
"Recovery Booting....
Recovery is not seandroid enforcing
set warranty bit: Recovery"
My phone isn't recognized by my computer or odin. And my phone won't go into download mode.
How can I fix this??
I'm dealing with the same problem, Korean Version SM-N900S N900SKSUENB8 4.4.2, using odin v3.09.
My Message;
"Recovery Booting....
Recovery is not seandroid enforcing
set warranty bit: Recovery"
Anyone help?
Hi,
My Working Solution;
Entering into Odin download mode, but the cable is not connected, you need to remove the battery and re-insert battery and the volume down + home + power should be pressed in turn.
CWM file downloaded from the following page after you've installed it, and the device is opened.
hxxp://techbeasts.com/2013/10/08/root-install-cwm-on-samsung-galaxy-note-3-easy-method-for-all-versions/
Hi, I am working on a sprint note 3 model SM-N900P
I Rooted Odin3 3.10.6
I installed twrp - teamwin recovery project 3.0.2-1
I installed supersu
I installed flashify
I installed samsung galaxy note 3 cleaner v0.5
I maybe installed n900-cwm-recovery-6.0.5.0, (or I tried to install it, not sure)
I was trying to install smartdebloater because note cleaner didn't work.
Now I am getting the black screen with the white 'samsung galaxy note 3' logo
and at the top of the screen I am seeing
recovery booting........ (in blue)
recovery is not seandroid enforcing ( in red)
set warranty bit: recovery (in yellow)
That flips to a team win screen recovery project 3.0.2-1
That opens on this;
running open recovery script
installing zip
updating partition details...
...done
full selinux support is present
running open recovery script
installing zip file '/sdcard/download/smartdebloater+v3+kk+n5009.zip'
checking for mds file
skipping mds check no mds file found
starting aroma installer version 2.7orc2
(c) 2013 by amarullz xda-developers
After a short time it loops back to the first screen with the red blue and yellow script at the top.
If I remove the battery and press the start button it enters this loop.
If I remove the battery and press the up volume, home and power it enters this loop
If I remove the battery and press power it enters this loop.
I have pressed the three buttons with the battery out. It enters this loop when I put the battery back in.
Sometimes it enters the loop when I put the battery back in without pushing anything.
Odin is not finding the device and neither is it showing up as a device in explorer, so I can't do anything from my laptop.
Going quietly crazy here, any insight or hail marys will be appreciated.
Try a different USB cable, USB Port and an older version of Odin for download mode.
Make sure all the drivers are installed.
Hi,
How much older a version of Odin?
I used Odin3 3.10.6 to root it a few days ago.
Okay so i have been using my s6 edge for a while and got bored with the stock rom and the root was successful but when i flashed twrp onto it i rebooted and it stays on the Galaxy S6 Edge sreen (the one before the flashing samsung logo) it also says "kernel is not seandroid enforcing " but just stays on this screen until the batter dies out i have tried using odin and odin can't read it i tried samsung kies but that can't read it either so i have deemed my pc useless in this situation
really need this phone to work so any advice would be much appreciated
Casey98 said:
Okay so i have been using my s6 edge for a while and got bored with the stock rom and the root was successful but when i flashed twrp onto it i rebooted and it stays on the Galaxy S6 Edge sreen (the one before the flashing samsung logo) it also says "kernel is not seandroid enforcing " but just stays on this screen until the batter dies out i have tried using odin and odin can't read it i tried samsung kies but that can't read it either so i have deemed my pc useless in this situation
really need this phone to work so any advice would be much appreciated
Click to expand...
Click to collapse
Can you get into download mode or recovery mode?
If you can get into recovery mode then wipe data/cache.
If you can get to download mode flash stock firmware and start again.
To get into recovery hold only down and power for 10 seconds, as soon as the screen goes off to reboot switch to recover combo, home and up amd power for 20 seconds until it boots to recovery. Try that first.
callumbr1 said:
Can you get into download mode or recovery mode?
If you can get into recovery mode then wipe data/cache.
If you can get to download mode flash stock firmware and start again.
To get into recovery hold only down and power for 10 seconds, as soon as the screen goes off to reboot switch to recover combo, home and up amd power for 20 seconds until it boots to recovery. Try that first.
Click to expand...
Click to collapse
this is where my problem begins the home button on the phone clicks but doesn't work the fingerprint sensor still works fine thats it so i was using adb commands from the terminal to boot it into recovery/download mode but now it just gets to the galaxy s6edge screen then just stays there so my computer can't read it so its stuck
After trying to reflash my phone I've managed to get into a loop where I can't get into any recovery mode.
After starting up I get a vibration then a screen showing:
Recovery Booting (blue)
RECOVERY IS NOT SEANDROID ENFORCING (red)
Set Warranty Bit : recovery (yellow)
I've tried all combinations of UP/HOME/POWER DOWN/HOME/POWER etc, but none do anything.
Is there anything else I can do, or is it time for the bin?
Of course, 10 seconds after I post, it starts working !
My phone is stuck in a bootloop. Here's what I've tried so far:
Booting into recovery mode, but it won't go into it, download mode does work though.
Flashing the latest 7.0 BTU using Odin, it is successful, but upon reboot the bootloop is back.
Flashing to another 7.0 BTU, same as above.
Flashing using AP + CP + CSC in Odin, same as above.
Flashing TWRP, it is successful, but again, on reboot the bootloop is back and it won't go into recovery mode, I have held down the buttons on the black screen, I've tried holding them whilst flashing, I've tried with auto boot and without it, nothing works. I've flashed TWRP about 10 times now trying different things.
Tried using ADB to get into recovery using TWRP, but ADB doesn't recognize any devices, probably because I don't have the USB mode enabled? Obviously I can't enable it as the phone is bricked.
Any suggestions?
This phone is so thin, it won't even make a good door stop at this point.
Sprinter55 said:
My phone is stuck in a bootloop. Here's what I've tried so far:
Booting into recovery mode, but it won't go into it, download mode does work though.
Flashing the latest 7.0 BTU using Odin, it is successful, but upon reboot the bootloop is back.
Flashing to another 7.0 BTU, same as above.
Flashing using AP + CP + CSC in Odin, same as above.
Flashing TWRP, it is successful, but again, on reboot the bootloop is back and it won't go into recovery mode, I have held down the buttons on the black screen, I've tried holding them whilst flashing, I've tried with auto boot and without it, nothing works. I've flashed TWRP about 10 times now trying different things.
Tried using ADB to get into recovery using TWRP, but ADB doesn't recognize any devices, probably because I don't have the USB mode enabled? Obviously I can't enable it as the phone is bricked.
Any suggestions?
This phone is so thin, it won't even make a good door stop at this point.
Click to expand...
Click to collapse
Try flashing philz recovery that worked for me to get recovery working !
Do you know what version and where from?
I tried a few versions but got the "Recovery is not seandroid enforcing" error on reboot.
I also tried recovery.tar from arter97 com (can't post the link) - Now it doesn't show the above error, and the Galaxy logo is showing without rebooting every 5 seconds. At least it's something different. Still can't boot into recovery mode though.
Here is a video that can fix the bootloop of Samsung Galaxy phone, maybe helpful with you.
https://www.youtube.com/watch?v=zXSHe3oorIM