My Micromax A250 has the following issues(because of installing different custom ROMs):
1. Camera is not able to focus.
2. Proximity sensor not working properly.
3. I am not able to install ROM directly from phone as recovery mode not working.
While going to recovery mode, it is showing me the Recovery Menu. But nothing is working. I cannot even factory reset the
phone. On the screen dead Android is being displayed. Nothing is working in recovery mode.
I can still use my phone with all of the above issues.
I need a stable and working ROM or any other way to fix all(or any) of the above mentioned issues.
It can be a stock ROM or custom ROM but as if I cannot install with phone itself, I need ROM which can be installed with SP Tool or any other PC Tool.
I was thinking of installing Cyanogen ROM, is it available for MMX A250?
Full description to fix all the issues will be appreciated.
Please help me out.
Thank You in advance.
Related
Hi guys.! Well, there's a serious issue with my phone - it is running without recovery. Everything happened when I wanted to install a CWM recovery for updating a new ROM for my Micromax A54 Phone. I searched alot on "how to install CWM recovery on micromax" and also the ROM, and tried every step carefully. But, at the end, when I used Recovery Manager for installing the same, it rebooted the phone and gone! And even today, when I start RecoveryManager for purpose of fixing my phone's recovery, sometimes it restarts itself automatically and sometimes, if in case RecMan starts, it reboots while reflashing the Stock Recovery/CWM. I want to install a new ROM for my phone but for that, I need to have a recovery in my phone.
When I start phone into Recovery Mode, the Ninja logo gets stuck up there leaving phone in unstable state. All I have to do then is to restart my phone and try again! Till today, I have not found how to fix my phone and get a new ROM+CWM for it. Please help with this.
Thanks a lot!! :fingers-crossed:
STOCK RECOVERY - http://d-h.st/D7G
STOCK ROM - http://d-h.st/fg2
CUSTOM RECOVERY - https://www.dropbox.com/s/2wvss17e0nddqce/recoverycwm6_a54_sandeep.rar (CWM TOUCH)
CUSTOM RECOVERY - https://www.dropbox.com/s/wgwk58dvfmniz14/RECOVERYCWM6_A54_SANDEEP.RAR (TWRP 2.3.3.0)
CUSTOM ROM - http://www.mediafire.com/download/69ccs68y6c2fjtl/Mokee_Final.zip
PASSWORD - [email protected]!n]A
CUSTOM ROM - http://www.mediafire.com/download/crn4d1jj4f4pobb/invincible_v1_a54.zip
NOTE : It's better to flash the recovery through fastboot mode.
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Link not working.
After a long search for stock recovery for my Micromax A54, I found this thread. But link to the stock recovery is not working.
'says file not found'. Can you please provide a working link, also it would be greatfull if you explain flashing via fastboot method
Thank you.
Yesterday 02/04/2014 I upgraded my room VERSION 4.3.21 MIUI V5 using cwm recovery and everything worked fine.
And today I decided to set up a room that has more kit kat android the problem is that now my android does not want to start in recovery mode.
I've tried everything, I root again, gave permissions and yet when it will reboot into recovery mode it formats and reset the device.
Is there another way to get into recovery mode?
Or have some program to install room the computer?
My phone is Blu Life One
Sorry for my english I'm Brazilian
I learned that to use the SP Flash Tool - spft
Anyone have rom blu life one for SP Flash Tool - spft? may be the original or any of that works
yea they don't have any ideas either
firstly i was using the stock rom in this phone. i searched many sites for a custom rom but failed. one day i was obsessed to flash a new custom rom and finally in a FB forum i got a link to a custom rom. After i installed this and rebooted, my phone did start but blinked continously. it blinked like a torch. now it isn't even booting into the recovery mode. please help me. i'm very tense about it as i have no extra phone to use. and it got bricked. i just want to be happy with the stock rom and not experiment more. just help me flash the stock rom. i dont know the use of sp flash tool. moreover whenever i download the drivers of micromax a115 3d from any site, i find no exe files to install so my pc has no drivers for my phone as well. the drivers just contain .inf files. i had flashed CWM recovery before this experiment. but now even the CWm recovery is also not booting. how to proceed next. atleast help me install the micromax a115 3d drivers in my pc. lease.
Hello there,
Need Help on urgent basis. I am still using HTC Explorer . I need Help with multiple things.
I was on custom rom with Philz Touch recovery. My phone started to do some issues with soft keys. I Tried some other ROM but nothing changed. I reverted back to the same ROM and then even my touch started to mess up.
I did restore of my old Stock ROM. (Backup I did before installing Custom ROM)
Now my touch is much better and soft keys are working much better.
I want to do a factory reset on stock ROM to see if can get rid of this soft key and touch issue because reverting back to stock ROM did a good job in almost solving my issue now my questions are:
1. Stock ROM but custom recovery (Philz Touch Recovery) is it possible to do factory reset in this situation or I have to revert back to stock recovery?
2. I am facing issue with fastboot my phone does not connect in fastboot mode it does shows Fastboot USB but on my computer it says Waiting for device need help with this too.
3. If anyone knows about the method to flash stock recovery without using PC then kindly do let me know.
4. I am using Stock ROM backup. ROM which came already installed on my device. Do I need to download RUU or it is just fine to do factory reset on this ROM.
Reply as fast as you can guys because I have only this one phone to use and I am tired of trying alot of things now I just want to do factory reset and then start over again.
Regards,
Usman Aly
No one????
I was trying to install a custom rom on my phone . I made a backup of my system using the phones recovery mode. After that i tried installing the rom, but i was told that i can only install the rom with clock work Mode (CWM) installed on my device. So i installed the CWM and went ahead to install the rom. As it turned out the rom was not compartible with my phone so the phone started bool looping (freezing at manufacture logo). Sensing danger i went back to restore my old operating system using the backup i made earleir only to realize that i couldnt install it. That was because i made the made the backup using the recovery mode of the stock rom and as such CWM could use that backup. Now am stuck with a soft bricked phone.
I have a few choices.
1. Get CWM out of the phone and use the recovery mode of the stock rom to restore my system.
2. Install a compartible custom rom on my phone and take off from there.
Can anyone help me out with a way that i can get back to the recovery mode of my stock rom or better still how to remove clock work mode from the phone.
Or alternatively a custom rom that will work with my phone. Am using a mediatek device and after searching for some time i have realised that there are very few roms out there that actually work with mediatek devices. If anyone can suggest one for me, i would be very grateful.
PHONE:
Mediatek 6572
Viwa max running on android 4.2.2
I have tried flashing back the stock recovery using a scater file and Sp flash tools, but it stucks at download section for a long time without starting. If i could get a working custom Rom i would be very happy. Thanks in advance.
Hey bro,
If you want a custom rom for your device i could help you but i would need some files
Dagobert88 said:
I was trying to install a custom rom on my phone . I made a backup of my system using the phones recovery mode. After that i tried installing the rom, but i was told that i can only install the rom with clock work Mode (CWM) installed on my device. So i installed the CWM and went ahead to install the rom. As it turned out the rom was not compartible with my phone so the phone started bool looping (freezing at manufacture logo). Sensing danger i went back to restore my old operating system using the backup i made earleir only to realize that i couldnt install it. That was because i made the made the backup using the recovery mode of the stock rom and as such CWM could use that backup. Now am stuck with a soft bricked phone.
I have a few choices.
1. Get CWM out of the phone and use the recovery mode of the stock rom to restore my system.
2. Install a compartible custom rom on my phone and take off from there.
Can anyone help me out with a way that i can get back to the recovery mode of my stock rom or better still how to remove clock work mode from the phone.
Or alternatively a custom rom that will work with my phone. Am using a mediatek device and after searching for some time i have realised that there are very few roms out there that actually work with mediatek devices. If anyone can suggest one for me, i would be very grateful.
PHONE:
Mediatek 6572
Viwa max running on android 4.2.2
I have tried flashing back the stock recovery using a scater file and Sp flash tools, but it stucks at download section for a long time without starting. If i could get a working custom Rom i would be very happy. Thanks in advance.
Click to expand...
Click to collapse
do you have a stock rom for this device?