DISCLAIMER: You know the risks, bricking, breaking etc. I'm not, nor is anyone else responsible if something goes wrong with your device, especially should it turn into a cave troll and bludgeon someone to death.
You will have to be rooted for this to work.
Update 1/5/11
Changed the install and loader scripts re-compressed and uploaded, new download link. Stream lined the installation process (removed 5 steps)
Update 1/4/11
reflect changes to ubuntu.sh and bootubuntu scripts and streamlining the process. Added screenshots
_________________________
I was over at nexusonehacks.net and looking at the ubuntu on nexus one hack and was thinking that this could be ported to the nook color. The idea is to run ubuntu from an img on the sd card.
The following is a modified version of the "how to" orginally posted here
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
Credits
The guys at NexusOneHacks
xda user munday who has modified the scripts to work for the nook color
Devs at XDA Developer for the Ubuntu ARM image for HTC HD2
Saurik (Jay Freeman) for the Debian G1 script, which was hacked for Ubuntu on Nexus One! and then re-hacked for the Nook Color by munday
Here we go:
1) Go download the ubuntu file here: http://www.megaupload.com/?d=67BU4Y3T
2) Extract the contents using 7zip http://www.7-zip.org/download.html
3) Copy the extracted folder "ubuntu" to the root of your SD card
4) Unmount the nook from your pc, go into the app NookColor Tools (if you don't have it download it here courtesy of Ben 74 and click All Settings->Development then uncheck Auto Mount. This will prevent the SD card from being mounted automatically when plugged into the PC
5) Plug the Nook back into your pc and open a command line then navigate to your android sdk folder ie C:\android-sdk or wherever you have it and type
Code:
adb devices
Hit enter and make sure that the nook color comes up (should be the SN of your Nook)
Note: This can also be done from terminal emulator instead of adb...but it is kind of a pain
6) Now we want to go into the command line on the nook so type
Code:
adb shell
Hit enter and this should bring up a "#" sign.
7) Type
Code:
su
hit enter (I do this just as a force of habit)
8) Now we navigate to the ubuntu folder we just copied to our sd card by entering
Code:
cd /sdcard/ubuntu
hit enter. To confirm you are where you want to be you can type
Code:
ls
and it should list the contents of the ubuntu folder.
9) Run the setup script ubuntu.sh by entering the following:
Code:
sh ./ubuntu.sh
hit enter
10) Now type
Code:
bootubuntu
and hit enter
11) So now we have ubuntu command line up and running which should look like:
Code:
[email protected]:/#
We will need to get some packages to run a gui and then connect to it via VNC client. So we need to update a few things first. Type:
Code:
apt-get update
then
Code:
apt-get install tightvncserver
now we need the gui elements so enter this:
Code:
apt-get install lxde
12) Type the following:
Code:
export USER=root
vncserver -geometry 1024×600
this sets the resolution...you can change it to play around, but the native resolution for the nook is 1024x600. This is also where you will set the password for your vnc server...make sure to remember it
13) Next, we are going to add the following to /root/.vnc/xstartup file using cat command: (hit enter after each line and ignore the fact that it looks like it does it twice)
Code:
cat > /root/.vnc/xstartup
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
icewm &
lxsession
After hitting enter after the last line press "Ctrl+D" twice then press enter
14) We need the vnc server to start every time we start ubuntu, type this:
Code:
cat > front
export USER=root
cd /
rm -r -f tmp
mkdir tmp
cd /
vncserver -geometry 1024×600
Same as before, hit enter after each line then after hitting enter for the last line press "Ctrl+D" twice then press enter.
15) Enter this
Code:
cat front /root/.bashrc > temp
Then
Code:
cp temp /root/.bashrc
16) Now on the nook open up your vnc viewer app (android vnc viewer or PocketCloud...or whatever you use)
Use the following settings:
Host Address: 127.0.0.1 (some don't require this)
Password: the password you set up in step 16
Port: 5901
Save and then click connect and you should be up and running on ubuntu! To leave ubuntu type exit from adb. This should kill ubuntu. Exit adb and then you can disconnect the nook from your pc.
To start ubuntu from the nook open up a terminal emulater and type:
Code:
bootubuntu
Hit enter, this should bring up the [email protected], hhen press "Home" key and open up your vnc app. Now you are ready to rock your Linux tablet!
You could also use gscript lite to automate the process of starting ubuntu so you don't have to type it in the terminal everytime. You can get gscript lite from the market or download the file I have attached.
It does seem a little laggy..just a little...for now anyway
To exit ubuntu: Disconnect the vnc client then hold the "Home" key (I use button savior which brings up a nice little task manager) and click the Terminal emulator when it pops up under running tasks. Once you are back in the terminal you can type:
Code:
exit
to shut down ubuntu.
Enjoy and make sure you thank munday and the guys at nexusonehacks and all the devs who helped make it possible.
-devastator
EDIT:
I noticed that after rebooting the nook would hang at the "Future of reading" screen....if this happens turn the device off remove the sd card the turn the nook back on. It should boot fine. After it's finished you can return the sd card and mount it. This is strange and I'm looking into it. I'm not sure if this is limited to me or if it is universal to all nooks. It also still fails at shutting ubuntu down for some reason. I'm still looking into this.g into this.
I got it going, just needed a few "busybox"-es here and there . It needs some work, right now to get X you have to use VNC.
It's sluggish but a bit more work might just yield something a bit more usable. I'll play more tomorrow night.
Here's my scripts:
ubuntu.sh
Code:
mount -o remount,rw /dev/block/mmcblk0p5 /system
busybox modprobe ext2
rm -f /data/local/bin/fsrw
rm -f /data/local/bin/bootubuntu
rm -f /data/local/bin/unionfs
rm -f /data/local/bin/installer.sh
rm -f /data/local/bin/mountonly
mkdir /data/local/mnt
#busybox clear
rm /system/bin/fsrw
rm /system/bin/bootubuntu
rm /system/bin/unionfs
rm -/system/bin/mountonly
busybox cp -f fsrw /system/bin
busybox cp -f bootubuntu /system/bin
busybox cp -f unionfs /system/bin
busybox cp -f mountonly /system/bin
cd /sdcard/ubuntu
busybox chmod 4777 *
cd /system/bin/
busybox chmod 4777 *
cd /
#busybox clear
echo " "
echo "Ubuntu Chroot Bootloader v0.1"
echo "Ubuntu Bootloader is now installed!"
echo "This process does NOT damage Android OS!"
echo " "
echo "Original Installer by Charan Singh"
echo "Modified for Ubuntu Chroot by Max Lee at NexusOneHacks.net"
echo " "
echo "To enter the Debian Linux console just type 'bootubuntu'"
bootubuntu
Code:
mount -o remount,rw /dev/block/mmcblk0p5 /system
export kit=/sdcard/ubuntu
export bin=/system/bin
export mnt=/data/local/mnt
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
busybox mknod /dev/loop2 b 7 0
mount -o loop,noatime -t ext2 $kit/ubuntu.img $mnt
mount -t devpts devpts $mnt/dev/pts
mount -t proc proc $mnt/proc
mount -t sysfs sysfs $mnt/sys
busybox sysctl -w net.ipv4.ip_forward=1
echo "Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4"
echo "nameserver 8.8.8.8" > $mnt/etc/resolv.conf
echo "nameserver 8.8.4.4" >> $mnt/etc/resolv.conf
echo "Setting localhost on /etc/hosts "
echo "127.0.0.1 localhost" > $mnt/etc/hosts
echo "READY TO ROCK AND ROLL BABY! "
echo "Brought to you by NexusOneHacks.net and the open source community! "
echo " "
busybox chroot $mnt /bin/bash
#After exit command is executed clear it all up
echo " "
echo "Shutting down Ubuntu"
umount $mnt/dev/pts
umount $mnt/proc
umount $mnt/sys
umount $mnt
Then just followed the instructions at nexusonehacks.
note: to run bootubuntu i had to use sh and the use the full path:
Code:
# sh /system/bin/bootubuntu
other note: I was using adb not a term app on the nook.
Obligatory video
I can't post links yet so check: youtube.com/watch?v=TnXfZ6aagn8 for a really boring video
EDIT: switched the names, DOH!
I also had to use sh and the full path also. Thanks for the update on the script...gonna try it in the morning (it's 2am here) will also see if I can help to get it running smoother. What class SD card are you using? I imagine a class 4 or higher would yeild better results as far as responsiveness goes.
The sd is a class 2 that came in one of my dev phones. I'll pick up a faster one tomorrow after work and test it out.
It's just about 3am here now, we must be in the same time zone.
I'm going to bed now, but first here's a modded version of the script you had originally posted that also works now.
bootubuntu
Code:
#!/bin/sh
mount -o remount,rw /dev/block/mmcblk0p5 /system
export kit=/sdcard/ubuntu
export bin=/system/bin
busybox [ ! -d /data/local/ubuntu ] && mkdir /data/local/ubuntu
export mnt=/data/local/ubuntu
export PATH=$bin:/usr/bin:/usr/sbin:/bin:$PATH
export TERM=linux
export HOME=/root
busybox mknod /dev/loop1 b 7 0
busybox losetup /dev/block/loop1 /sdcard/ubuntu/ubuntu.img
mount -t ext2 /dev/block/loop1 /data/local/ubuntu
#mount -o loop,noatime -t ext2 $kit/ubuntu.img $mnt
mount -t devpts devpts $mnt/dev/pts
mount -t proc proc $mnt/proc
mount -t sysfs sysfs $mnt/sys
busybox sysctl -w net.ipv4.ip_forward=1
echo "Setting /etc/resolv.conf to Google Open DNS 8.8.8.8 and 8.8.4.4"
echo "nameserver 8.8.8.8" > $mnt/etc/resolv.conf
echo "nameserver 8.8.4.4" >> $mnt/etc/resolv.conf
echo "Setting localhost on /etc/hosts "
echo "127.0.0.1 localhost" > $mnt/etc/hosts
echo "READY TO ROCK AND ROLL BABY! "
echo "Brought to you by NexusOneHacks.net and the open source community! "
echo " "
busybox chroot $mnt /bin/bash
#After exit command is executed clear it all up
echo " "
echo "Shutting down Ubuntu"
umount $mnt/dev/pts
umount $mnt/proc
umount $mnt/sys
umount $mnt
busybox losetup -d /dev/loop1
#unregistering the loopback device just seems to die. need to fix or remove.
I'll look at the N1 formus tomorrow too and see if they have made progress in getting X to run fast or without need for VNC.
Nice work, I am addicted in seeing the crazy crap people are doing everyday.
Couldn't sleep so I'm messing around with it now...I'm using a class 4 and have it up and running. It does seem to be a little laggy, but I don't have a class 2 to compare it to. Let me know what you find out, I'll keep playing with it also to see if I can get it to be more responsive...but we are definately on our way to having a great little linux tablet in addition to android. You should also be able to use this for other builds of linux also by just changing out the .img file to a flavor of your choosing. I'm excited
I have also updated the OP with the how to and credits. Really appreciate your help munday.
I noticed that after rebooting the nook would hang at the "Future of reading" screen....if this happens turn the device off remove the sd card the turn the nook back on. It should boot fine. After it's finished you can return the sd card and mount it. This is strange and I'm looking into it. I'm not sure if this is limited to me or if it is universal to all nooks.
Edit:
Running into some strange occurrences...it appears that when you type exit from the terminal to kill ubuntu, I believe ubuntu stays running...anyway, I'm going to bed and will work on it more tomorrow.
devastatorx said:
You should also be able to use this for other builds of linux also by just changing out the .img file to a flavor of your choosing. I'm excited
Click to expand...
Click to collapse
Are there any increased risks with changing the version you use?
Well, you will want to make sure that the build supports ARM based devices.
munday said:
Then just followed the instructions at nexusonehacks.
note: to run bootubuntu i had to use sh and the use the full path:
Code:
# sh /system/bin/bootubuntu
Click to expand...
Click to collapse
I fixed this, the scripts were backwards, I have updated the OP to reflect the changes and bootubuntu now works
devastatorx said:
I fixed this, the scripts were backwards, I have updated the OP to reflect the changes and bootubuntu now works
Click to expand...
Click to collapse
sweet, i can't wait to get home to play more!!!
I've tried running ubuntu.sh from the terminal emulator (With su) and from ADB, and have not had success with either.
The readout is:
Code:
': File existste '/system/bin
': File existste '/system/bin
': File existste '/system/bin
: not found
: not found
cd: can't cd to /sdcard/ubuntu
: not found
: No such file or directory
: not found
cd: can't cd to /system/bin
: not found
: No such file or directory
: not found
cd: can't cd to /
: not found
: not found
Ubuntu Chroot Bootloader v0.1
Ubuntu Bootloader is now installed!
etc., etc.
Is there a problem with how I copied the script? I assume the first part about the file existing is due to this being the third or fourth time I've tried running the script (Unsuccessfully), but I've no idea how to interpret the rest.
Thanks
munday said:
sweet, i can't wait to get home to play more!!!
Click to expand...
Click to collapse
I sent you a message
Link3737 said:
I've tried running ubuntu.sh from the terminal emulator (With su) and from ADB, and have not had success with either.
The readout is:
Code:
': File existste '/system/bin
': File existste '/system/bin
': File existste '/system/bin
: not found
: not found
cd: can't cd to /sdcard/ubuntu
: not found
: No such file or directory
: not found
cd: can't cd to /system/bin
: not found
: No such file or directory
: not found
cd: can't cd to /
: not found
: not found
Ubuntu Chroot Bootloader v0.1
Ubuntu Bootloader is now installed!
etc., etc.
Is there a problem with how I copied the script? I assume the first part about the file existing is due to this being the third or fourth time I've tried running the script (Unsuccessfully), but I've no idea how to interpret the rest.
Thanks
Click to expand...
Click to collapse
Try using these, just unrar and then copy them in your ubuntu folder, if it asks to overwrite just click yes...also you have autmounting of the sd card turnned off in nook color tools settings right?
Yeah, it must have been an error on my end. Using the updated scripts you posted worked like a charm.
Thanks!
Link3737 said:
Yeah, it must have been an error on my end. Using the updated scripts you posted worked like a charm.
Thanks!
Click to expand...
Click to collapse
Good to hear!
I'm currently working on making this a port to the SD card so that with the sd card in it boots into ubuntu from power off, and with the sd card out it boots to android then you replace the sd and use it for storage like normal. It will also run a lot snappier....well that's the idea anyway.
devastatorx said:
Good to hear!
I'm currently working on making this a port to the SD card so that with the sd card in it boots into android from power off, and with the sd card out it boots to android then you replace the sd and use it for storage like normal. It will also run a lot snappier....well that's the idea anyway.
Click to expand...
Click to collapse
Booting from SD in the same fashion as Nookie Froyo? That sounds like it would give a huge performance boost over the current method, I can't wait to see what you come up with.
This should be acheivable using the method mentioned in this topic:
http://forum.xda-developers.com/showthread.php?t=873243 thanks to clockworx.
Currently looking into this
devastatorx said:
This should be acheivable using the method mentioned in this topic:
http://forum.xda-developers.com/showthread.php?t=873243 thanks to clockworx.
Currently looking into this
Click to expand...
Click to collapse
I was thinking the exact same thing, the nook seems to like booting from sd, so we should be able to set up the partitions like the foryo sd and edit the init.rc and env.txt to boot ubuntu instead of android. Just a theory though. It's my plan for tonight anyway.
munday said:
I was thinking the exact same thing, the nook seems to like booting from sd, so we should be able to set up the partitions like the foryo sd and edit the init.rc and env.txt to boot ubuntu instead of android. Just a theory though. It's my plan for tonight anyway.
Click to expand...
Click to collapse
I also stumbled across this: http://androix.org/ Which talks about a native android xserver which does a way with the vnc aspect altogether. I downloaded and attempted to install but I get the error "There is a problem parsing the package" and I haven't had any luck plus there isn't much documentation.
Let me know how it goes munday, I'll be working on the same thing later (have to take the fiance out for dinner)
question
I was just curious, after installing ubuntu can we install flash as we would had we booted linux from netbook?
I learned about this here... http://fieldeffect.info/w/NativeCompileSDK
You can install an i386/x86_64 chroot within your existing Debian chroot using qemu-user-static to run the Android SDK on your Android phone/tablet/phablet.
1.
Get yourself a debian chroot, I recommend at least 2gb. I use DebianKit from market.
2.
You will need a X11 desktop environment and a VNC client on your device. I use androidVNC from market.
Here is my working example...
Start your Debian chroot/environment and do...
apt-get install openbox openbox-themes obmenu obconf menu menu-xdg xdg-utils xfonts-base xfonts-terminus* nautilus terminator lxappearance gmrun leafpad man-db hicolor-icon-theme tightvncserver tint2
That gives you a window manager, fonts, filebrowser, terminal emulator, text editor, theme manager, taskbar, and a VNC server.
Now lets get some GTK engines and libraries....
apt-get install gtk2-engines-auroa gtk2-engines-murrine gtk2-engines-oxygen gtk2-engines-pixbuf libgtk2.0-bin gtk3-engines-oxygen gtk3-engines-unico libgtk-3-bin
Now 7zip to handle zips and archives comfortably(put non-free in your apt sources.list)...
apt-get install p7zip p7zip-full p7zip-rar zip unzip
##The Android SDK manager, qemu, and multistrap##
apt-get install ant file openjdk-6-jre openjdk-6-jdk qemu-user-static libswt-gtk-3-java libswt-cairo-gtk-3-jni
3.
Now we can build a small x86_64 rootfs using multistrap
multistrap can use a config, have mine...
http://db.tt/hS5j3wg
Copy multistrap.conf straight into your working(pwd) directory....
cp /sdcard/Download/multistrap.conf .
Do this to avoid multistrap complaining later...
cat multistrap.conf >mstrap
mkdir /data/mnt
Determine size of rootfs for loop image..
du -hs /data/mnt/
Now make an image for x86_64 chroot
dd if=/dev/zero of=/sdcard/64bit.img bs=$(( 0x100000 )) count=YOUR IMAGE SIZE
That byte size makes your image slightly larger than the count value in Mb, for example count=78 will write 82Mb image.
mkfs.ext2 /sdcard/64bit.img
tune2fs -c0 /sdcard/64bit.img
mkdir /data/tmp
busybox mount -o loop /sdcard/64bit.img /data/tmp/
cp -r /data/mnt/* /data/tmp/
umount /data/tmp
rm -r /data/tmp/
rm -r /data/mnt/
mkdir /data/mnt
busybox mount -o loop /sdcard/64bit.img /data/mnt/
5.
Now the environment is set up and mounted, at this point install the SDK
Aim your browser to http://developer.android.com/sdk/index.html
Select "Linux" from "SDK Tools Only", thats the last thing at the bottom of the list.
cp /sdcard/Download/android-sdk_r21.0.1-linux.tgz .
7z x android-sdk_r21.0.1-linux.tgz russosv
7z x android-sdk_r21.0.1-linux.tar
Now we need a couple goodies from http://fieldeffect.info/w/NativeCompileAPK ##--Thanks to russosv from FeildEffect
These are edited from original....
#!/bin/bash
QEMU=/usr/bin/qemu-x86_64-static
64CHROOT=/data/mnt/
case "$1" in
mklinks)
if [ ! -e "./64BIT" ]; then
mkdir ./64BIT
fi
for i in $(file ./* | grep "ELF 32" | awk '{print $1}' | sed s/://g | sed s/[./]//g); do
echo "Moving $i..."
mv $i ./64BIT
ln -s ~/bin/run-64-link $i
done-
;;
*)
$QEMU $64CHROOT/lib64/ld-linux-x86_64.so.2 --library-path $64CHROOT/lib:$64CHROOT/usr/lib:$64CHROOT/usr/share/perl/5.12.4/unicore/lib:$64CHROOT/var/lib:$64CHROOT/lib/x86_64-linux-gnu:$64CHROOT/usr/lib/x86_64-linux-gnu [email protected]
;;
esac
Copy that to run-64, then...
chmod 755 run64
cp run-64 /usr/bin/
One more...
echo $(dirname $0)/64BIT/$(basename $0) [email protected]
/usr/bin/run-i386 $(dirname $0)/64BIT/$(basename $0) [email protected]
Make that run-64-link
chmod 755 run-64-link
cp run-64-link /usr/bin/
5b.
Now launch VNC server
tightvncpasswd
tightvncserver
killall Xtightvnc
cat >.vnc/xstartup<<EOF
tint2 &
terminator &
openbox-session
EOF
tightvncserver
export DISPLAY=:1
6.
Now launch the VNC client I mentioned earlier, should connect with 127.0.0.1:5901 and your password you set.
Go back to terminal or use the one launched on X11 to do...
sh android-sdk-linux/tools/android
Install at least one api.
If all went well you can now go around "debugging" yours and your friends Android devices over wifi now.
For an example, and to see it work do....
svc wifi disable(or enable) ##this turns off/on wifi
setprop service.adb.tcp.port 5555(or -1) ##this turns on/off adb over network
stop adbd
start adbd
adb connect 127.0.0.1(yours) or any other adbd addy listening on your network,
Have fun
Never did a "how to" before, go easy and I'll make corrections and answer things. Thanks for reading. Leave feedback.
Potential necro post but I believe the information is still currently valid and not readily available on searches. I've looked variations of this up for years with no luck until I hit the right search terms.
bump, and thanks.
can't believe there's no comments.
I know it's a slower than real-64-bit-pc method but not all of us have access to new hardware... or pc's. Maybe a novelty, still cool and useful if you've got the time to let the slower hardware compile.
you have preserved the scripts, original link is dead.
here is the Internet Wayback Machine cache of the original circa 2012 for reference.
http://web.archive.org/web/20120502044700/http://fieldeffect.info/w/NativeCompileAPK
appreciate you sharing.
I have a non-rooted Android device with stock ROM 4.4.2 and I have the following test shell script:
Code:
adb push test.sh /data/local/tmp
adb shell "cd /data/local/tmp; chmod 755 test.sh"
adb.exe shell "sh /data/local/tmp/test.sh > /dev/null 2>&1 &"
If I run this over ADB from PC to my device, it simply works.
Now convert this to:
Code:
cp test.sh /data/local/tmp
cd /data/local/tmp; chmod 755 test.sh
/system/bin/sh /data/local/tmp/test.sh > /dev/null 2>&1 &"
and it doesn't work. It says permission denied on /data/local/tmp.
Is there any other EXT4 place on a non-rooted device that I can do this?
Well, I cd to /data/local/tmp and even submitting a 'ls' command inside Terminal Emulator doesn't work, it says permission denied, but when doing it from PC to Android using ADB it's fine. Is there any workaround for this? I want to be able to do this on the device itself.
Thanks
idoit said:
I have a non-rooted Android device with stock ROM 4.4.2 and I have the following test shell script:
Code:
adb push test.sh /data/local/tmp
adb shell "cd /data/local/tmp; chmod 755 test.sh"
adb.exe shell "sh /data/local/tmp/test.sh > /dev/null 2>&1 &"
If I run this over ADB from PC to my device, it simply works.
Now convert this to:
Code:
cp test.sh /data/local/tmp
cd /data/local/tmp; chmod 755 test.sh
/system/bin/sh /data/local/tmp/test.sh > /dev/null 2>&1 &"
and it doesn't work. It says permission denied on /data/local/tmp.
Is there any other EXT4 place on a non-rooted device that I can do this?
Well, I cd to /data/local/tmp and even submitting a 'ls' command inside Terminal Emulator doesn't work, it says permission denied, but when doing it from PC to Android using ADB it's fine. Is there any workaround for this? I want to be able to do this on the device itself.
Thanks
Click to expand...
Click to collapse
No there isnt, not if you try using /data partition. ADB can read this partition (and that too was added around android kitkat itself for purpose of adb backup
etc). So ADB can read this partition, but terminal emulator and such cannot.
Assuming that you have a great reason to simply not copy the sh file to user-usable internal memory, /system partition is the one place where you can copy things without actually having root (and even access them with terminal emulator, but not manipulate them), and this isn't that simple either. Rather, the method will be device dependent. For instance, if you have a phone like Nexus phones, simply download stock firmware, open/extract it depending on what format it is (img or tar), add your sh file and repack the firmware, then flash it into the phone. The firmware should be same as your current installed so your applications dont mess up. But this method is not only long (and messy if your device has integrity checks on firmware files), but also not possible on some phones (as far as I know).
You can also try copying the sh file with adb to /data/data/com.android.terminal. Then you should be able to access this with terminal emulator (since an app has permissions inside its own data folder). However I have not tested this method and I am not sure it will work.
Besides this, every app (including terminal emulator) runs in a sandbox and does not have access to anything except /system (read-only access), emulated user-storage and its own data inside /data/data/. So in phone itself, you cannot read the file unless you copy it to /system or user-memory. And this finally implies that except above two methods, there is no other way to copy file to some other place except user-memory and be able to read it using some app inside phone itself without rooting.
Thanks for your comprehensive reply. I resolved the problem. Yes, it's right, I can simply run the shell script without even moving it to /data/local/tmp... so now I can conveniently running it directly from my phone without having to turn a computer on and do it over ADB.
thankx
Hello everyone,
I've updated my firmware to the latest version of my huawei ascend p7 making it impossible to root my phone. Now what I'm trying to do is get the non-rooted busybox working and replace the old links of commands with the ones in busybox. I'm using the following commands to do that:
First I export the path and such using:
Code:
export PATH=$PATH:/data/data/burrows.apps.busybox/app_busybox;
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/data/data/burrows.apps.busybox/app_bussybox
Now I'm able to use busybox in my terminal (only for that session, when I exit the terminal and restart it I would have to re-do the export path thing).
So... I wanted to replace all the links to those of busybox using the following command:
Code:
for c in `busybox --list`; do busybox ln -s busybox $c; done
This however outputs for each command for example cat:
Code:
ln: cat: Read-only file system
I've read somewhere that you can remount your system partition in order to make it writeable? Is this the way to do it? And if so what commands should I run? I have access through adb and a normal shell on the phone. Remember: it's non-rooted...
EDIT: seems like I can't remount /system without root priviledges...
Also I would like to be able to have a full colored bash shell with a bashrc (in which I can add the path to busybox aswell) if that's possible.
I'm using jackpal's android terminal emulator.
EDIT: I think I might've posted this on the wrong forum, if anyone is so kind as to move this to this forum: http://forum.xda-developers.com/ascend-p7/help I would greatly appreciate it. Altho I think this might be a general question rather then a model specific question.
I am trying to install Debian on my Samsung Galaxy Tab S following the instructions in How to run Debian or Ubuntu GNU/Linux on your Android and has come to the part where I should be Creating the Debian root file system and for which one of the commands to my tablet is
Code:
# busybox chroot /root /debootstrap/debootstrap --second-stage
However there is no command
Code:
/debootstrap/debootstrap
at my tablet and I cannot find a way to install it.
So have I misunderstood something or is there a way of installing debootstrap at an Android?
*bump*
I can't help you with this problem. Maybe other people will.