Hello everyone,
I own a samsung galaxy s2 gt-i9100 I've been using it for a long time. A few days ago i installed cynogenmod 13 marshmallow on it but faced some severe issues like dialler problems,battery drain,google play services not working. So, i switched it back to my previous rom i.e. cm 12.1 lollipop but my old twrp recovery got replaced by cynogenmod default recovery. Now some people who may have used it know that its very basic and does not has backup,restore, has bugs,does not flashes some zips or files that i wanted so i tried to replace it with twrp/cwm through rashr,flashify,rom manager,etc. But none of it worked, whenever I'd boot after flashing the twrp/cwm recovery it'll go back to the default cynogenmod recovery. Now, me not knowing what im doing stupidly downloaded mobile odin lite app then i downloaded the cwm kernel recovery kitkat compatible and installed via mobile odin lite. After that it got screwed, it won't just startup it'll just start and go into recovery i mean continuously! It was annoying, then i read an article on a forum to download any cm nightly or stable mod and flash it but i did a little bit of tweak of removing the recovery boot img file with twrp to get preinstalled twrp recovery but i gotta admit it was the last mistake possible. Now i sit here, with a bricked phone in my hand which is looping continuously only on the samsung logo. If anyone out there can assist me correctly it'll be a life saver for me. Thanks for reading this and please reply with a solution asap. Please! Im in danger!
can you get into download mode?
if yes you can download a stock firmware and flash but you will have to hope it will work, otherwise you will get stuck on nand write start which means the nand is stuffed/corrupted and then basically only a motherboard replacement will do the job, or you can try using another computer, reinstall usb drivers..
can you get into recovery mode?
if you can, you can flash a rom
The 'nand stuffed' assumption is a last resort, tried everything and nothing works assumption. There is *plenty* to try before assuming that the nand is 'stuffed'......
It sounds like (from your description) that you may have rendered recovery useless and inaccessible.
I've a feeling what you need to do is to go into download mode and Odin flash a firmware.
Even if it doesn't boot, you should have a recovery that you can flash PhilZ recovery from and then use that to flash a custom rom. Initially, I'd stay away from the MM builds and instead flash something KK or LP based as they're less 'volatile' and have a higher degree of stability than the MM roms.
http://i.imgur.com/rVnFwJM.jpg
Related
While I did find a similar posts, they were for different devices. I also tryed to search o different sites for similar problems to no avial.
What Happened: After backing up system data and app data then removing Foxhound ROM with factory reset, and installing UltimaROM i came to find that the modem did not install correctly result in no connection to my cell network. I booted into TWRP recovery to try and do a re-install of the ROM only to find that TWRP was restarting itself every 3 seconds or so. I attempted to restart the device which i found to result in a TWRP bootloop that i cannot get out of, it constantly is booting into recovery mode and i cannot get it restart the OS.
What I've tried: Since i can get into download mode i decided to attempt to re-install TWRP using Samsung Galaxy S3 Toolkit but since i do not have USB debugging on i cannot do that. I'm mainly looking for a fix before i go and claim it on the warranty saying update went bad or something. If people need more information I will try to provide it as best i can.
Summery if i confused people is that TWRP is in a bootloop, i am unable to get to the OS, but i still have download mode available.
I fixed it but not how I would have liked to. I ended up losing all data due to flashing stock ROM using ODIN. I would still much appreciate a alternative method that does not involve loss of data though just for future reference, that is if anyone knows a alternative method.
Sent from my GT-I9300 using xda app-developers app
could've tried reflashing TWRP or any other recovery through odin
I have an LG Optimus Q (LGL55c) with twrp loop. I was trying to go back to stock rom, instead I deleted all the system files in twrp when it was working...Then I rebooted back into recovery and get the loop. Does this mean I completely bricked my phone? I tried using adb, adb shell doesn't work. It does find the device. Even tried the LG update with no sucess Any ideas or suggestions?
I just read the forum title, I thought this was for the Optimus Q not the Samsung S3. Sorry mods
Temasek unofficial cm12 5.02
I was running this rom when my power button shorted and I got it replaced but then I tried to do a complete wipe and clean flash but since then it has been twrp bootlooping, tried to flash the latest recovery through Odin but still doesn't work also tried stock firmware flash but says binary not available.
This is my secondary device and I've not been in touch with Odin for a while. Any help will be appreciated.
Thanks
Download latest firnware from sammobile.com and flash it with Odin, as described on sammobile: does Odin finish with '1 succeeded'?
I'm in a very similar situation, but with my Samsung Galaxy Note 2 (N7105). It's rooted, and I am, or was using TWRP 2.7.0.2. ROM is CyanogenMod 12, 5.0.2 Lollipop.
I did a factory reset from INSIDE Android, and chose to wipe internal memory. Phone did the reset and wipe, rebooted into TWRP instead of Android, and now I have TWRP boot loop.
I posted more about it here: http://forum.xda-developers.com/showpost.php?p=60247503&postcount=3671
I have the Problem toooo!
What must i do Now!
with my S3 is the same!!!
For posterity:
With an old (2014?) version of TWRP and a custom ROM, I tried reverting to factory settings. That caused the phone to reboot TWRP, and the screen would flash every couple of seconds. I flashed a stock recovery image I found on Google, and when it restarted again, the wipe was completed successfully. My intention was to wipe all user data anyways so I can't say if this method might save it.
So I have a Sprint Galaxy Mega and it seems as though it may be semi-bricked. It will not boot past the GALAXY MEGA logo. It will just continuously power cycle to and from that logo. If I attempt to put it in recovery, it will say "RECOVERY BOOTING" in blue letters as usual, then power cycle right back to the GALAXY MEGA screen. It will boot into Odin mode and accept Odin files, but after attempting do do a typical "stock Odin" scenario, nothing has changed. I looked around for the Pit but cannot seem to find it. Does anyone has a reliable link to the latest Odin stock restore and the PIT file that matches it?
Maybe an error with your system data. So you can't reboot into recovery ? If you can try to wipe data and cache and reboot.
It may be an abnormal re-partition when flashing stock rock, and then I can't help you (have the i9205 international model). Some members of this section have the Sprint version, try to send them a PM if nobody can help you
Nope, no recovery. I was considering flashing a custom recovery to it to see what it does but I don't wanna kill the phone any more than it already is...
Yes I understand. But flashing custom recovery can solve your problem, only if you can boot on it. I think it can't make more damages to your phone, he just always stuck on boot phase like a brick, but if you don't want to try, wait for a developer making you a PIT file. More safe, the Galaxy Mega have a too poor development support for risk anything...
Well I went ahead and flashed TWRP to it. It will boot into TWRP just fine. Tried flashing the stock L900 ROM zip and it still won't boot.
Well I installed a custom ROM, SlimKat, and the phone boots. If I install the stock ROM located in the following link, OP's signature, the phone goes right back to bootlooping. ???
I need either the stock ROM or a ROM with dialer codes because this phone will be flashed to a regional carrier.
what recovry version you use bro. maybe recovery problem. try use your custom rom to flash another recovery from philz. the latest one. some time recovery dont work properly to downgrade from 4.4.2 to stock 4.2.2.
Great, so with Philz Touch Recovery, I never had problems for downgrade and I do this often for testing roms. Now it should not bootloop if you reflash stock.
I am using "CWM-based recovery 6.0.4.7"
I will try Philz recovery
After trying Philz recovery to flash the stock file I found, it once again bootlooped. Is there another stock ROM floating around somewhere or possibly a custom ROM that has dialer codes such as ##3282# enabled?
No idea... But actually the most complete stock based custom rom is MegaFire I think. Flash V5 (not V5x !) it should be enabled.
I don't see what is the problem while flashing stock rom... Oh ! Maybe you haven't enabled USB Debugging, I forgot to do that one time and I had some issues, in case you try to flash a firmware where Knox or others features are on with a modem without these, may cause bootloop. I've searched for 2 days before solve that little problem...
Have you tried another firmware ? If you can flash custom rom, something went wrong before flash... Odin folder is complete ?
Strange...once again a boot loop after flashing the MegaFire ROM
I'm almost certain I need the PIT file. I cannot find it anywhere.
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
I'm having the same problem too dude, I
I download n flash all.the firmware I could find online, since I have no idea what the country of origin is. But most of them work, but no WiFi, Bluetoothand the sim card slot don't read
VirtueToVice said:
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
Click to expand...
Click to collapse
So recently i tried to update my twrp recovery and i used goomanager on my phone and i think i used the wrong file because after that file was flashed i can no longer get into recovery mode. Every time i get in to recovery mode it show in the top left recovery mode and then goes into a bootloop and repeats that even taking the battery out cant fix this because when you turn it on it does the same thing...i fixed this by going into odin and flashing cwm recovery md5 file which i assumed would replace the recovery on my phone...but it didnt and i no longer go into recovery mode or flash roms. I would appreciate any help on this if I can fix this problem somehow or if there are other ways to flash roms...i have been looking for ways to flash roms using odin.....Thank You
lol does anyone know what to do?
aethlive said:
So recently i tried to update my twrp recovery and i used goomanager on my phone and i think i used the wrong file because after that file was flashed i can no longer get into recovery mode. Every time i get in to recovery mode it show in the top left recovery mode and then goes into a bootloop and repeats that even taking the battery out cant fix this because when you turn it on it does the same thing...i fixed this by going into odin and flashing cwm recovery md5 file which i assumed would replace the recovery on my phone...but it didnt and i no longer go into recovery mode or flash roms. I would appreciate any help on this if I can fix this problem somehow or if there are other ways to flash roms...i have been looking for ways to flash roms using odin.....Thank You
Click to expand...
Click to collapse
First mention your device name and ROM flashing methods differ with devices and you cannot flash any custom ROM with odin
just got same issue. note 3 sprint variant
i flashed twrp through odin and seems fine now.
Hi everyone
My sister updated her MEGA OTA last month. She cant remember which version she was on. I am assuming it was 4.3. shes doesnt know much,
Her phone got stuck in bootloop.
Initially a got a hard time even getting into restore mode. however after a lot of goggling and trials and errors here is where i am today :
1- I can install TWRP and/or Philz recovery and boot into them.
2- I can enter download mode
3- I have tried installing many ROMS and different versions. I was only partially successful with 4.4 versions because I get a passed message in Odin however upon restart the phone enters boot loop again.
4- I have tried multiple wipe data/dalvik cache/cache and restoring factory settings but i still get the same results.
5- Only in Philz recovery i can mount the external SD card and copy zip files. I was able to root the phone that was (but im not sure if it still is). However all ROMs zip files I tried to install (both from PC and from extSD card) wouldnt open in recovery mode.
Because I get a passed message when I install a ROM from Odin , I dont know what the issue could be. But there is something wrong that happens as soon as this phone boots up.
I seriously do not know what to do anymore. I just need this phone to be working again. At this point I dont care about warranties/ROM versions/stock or custom...
Please help and sorry for my bad English
It sounds like you need to download the stock rom and flash it in Odin (you gotta put the phone in download mode to flash in Odin). The stock rom can be found on the sammobile website in the firmware section. That should get you back to square one (stock rom, stock recovery, no root). Then you start over from scratch.
Sent from my SGH-M819N using XDA Free mobile app
Thanks
I did and I still get the same problem.
In fact after installing stock rom, i could not enter "stock" so I installed philz recovery, logged in philz and wiped cache a couple of time, did a factory reset.
and yet when i restart , the phone is stuck in bootloop.
Maybe she has a Galaxy Mega with a repaired screen. Starting with 4.4 Samsung only supports a digitizer with Synaptics brand chip. It's a big mess and there are countless screens and digitizers made worthless. I think unofficial 4.4 by Cyanogen and others might work, but not official Samsung. With some Galaxy Megas you get a bootloop. With others it boots however the digitizer and touch functions no longer work. I don't know how to go back after you are on official 4.4 because last I saw, there was no root for it. If I'm wrong, someone else please clarify and continue to help.
IMHO only one way out from such situation is try to flash MegaFire MJ2 which is derived from stock 4.2. It's only one 4.2 ROM which can be safely flashed onto KK.
Iformation about MegaFire you can find HERE
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307