Hi. So I have REDMI NOTE 3 SD. I got permission to unlock officially. However the Mi unlock tool is giving error of could not verify device.
I'm on Global Stable rom 7.2.3.
I'm not able to go to China Stable ot Dev rom through updater app. It gives error that could not verify package.
Please help as to how to unlock the bootloader officially even though I have permission.
Sent from my Redmi Note 3 using Tapatalk
Welcome to the club. You are not the only one with this issue. Give it some time (maybe a week or two) and try again.
"
http-double-dot-//
en-dot-miui-dot-com /
thread-274412-1-1.html
"
This work for me. (replace the spaces,..... and join the url inside the quotes)
jain_pranav said:
Hi. So I have REDMI NOTE 3 SD. I got permission to unlock officially. However the Mi unlock tool is giving error of could not verify device.
I'm on Global Stable rom 7.2.3.
I'm not able to go to China Stable ot Dev rom through updater app. It gives error that could not verify package.
Please help as to how to unlock the bootloader officially even though I have permission.
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Flash China Stable through Mi Flash then use Updater app to update to China Developer from China stable. Then unlock.
You can't flash China Developer from Global stable using Updater app.
AMDFusion said:
Flash China Stable through Mi Flash then use Updater app to update to China Developer from China stable. Then unlock.
You can't flash China Developer from Global stable using Updater app.
Click to expand...
Click to collapse
+1
I remember RN3 giving me problems when I tried to go from Global Stable to China Dev as well. Global Stable to Global Dev worked perfectly though.
I managed to unlock by going from global stable to global dev.
Immortal68 said:
+1
I remember RN3 giving me problems when I tried to go from Global Stable to China Dev as well. Global Stable to Global Dev worked perfectly though.
Click to expand...
Click to collapse
you cant go from Global stable to China dev, first you have to flash china stable through flash tool than
download and install china dev rom zip via updater app. it'll work..
Update your stock ROM...had the same issue..the update helped with solving my problem (50℅ couldn't verify device error)
pls post here with your details.
http://en.miui.com/type-64-717.html
Had the unlock stuck at 50% too - worked after going to Dev version. I'm on Global but I think China Dev will also work.
dear all.
I have Indian Redmi Note 3 ( Snapdragon version, 3 gb 32GB), I am on stock MIUI Global StableVersion 7.2.5.0(LHOMIDA) . I want to flash Global Developer ROM on this .
I have a few queries
Q.1- Can I directly flash global developer ROM through Updater App without any boot loader unlocked issue or should I unlock the boot loader first?
Q.2 How can I flash Chinese ROM? The reason behind this is that Chinese version supports CDMA data facility which is missing in my global stable version at present I am using TATA cdma SIM in SIM slot 1, wherein voice call and sms works without any problem but data is not working probably because MEID is missing in global ROM ,so i guess that Chinese ROM will solve this issue. )
kindly help
warm regards
ankjain
With regards to your first query..You should go with the official way of unlocking bootloader thought it takes time ..some people who did the unofficial unlocking method ended up bricking their phones..I unlocked it officially then flashed twrp and flashed global dev rom
@vish9180- thanks mate. Is it necessary to unlock it?
Happy to help..It is...I didn't want to run the risk of bricking it like the other guys...so I went the official route...took me 4 days ..since I'm some what active on miui forum..participate in miui forum and they'll clear your unlock request faster.
I am not able to use wifi after trying to upgrade from global to developer rom please help me
Note i was unsuccessful to go on devoper rom with mi global rom yet but wifi stop working
Hello dear friends,
I have buyed a Xiaomi Redmi Note 3 with global rom. I will install dutch language, but cannot find a good rom. Can you help me please? I have also problem with the sim tray. The phone recognize both sim cards, but doesnt have service. Please help. I live in the Netherlands.
The ROMs from xiaomi.eu have Dutch language in-built as far as I know. Here is the link to their Weekly ROMs - https://xiaomi.eu/community/link-forums/roms-download.73/
As for the SIM card issue, have you checked if your operator's bands are supported by the phone or not?
What is your current rom?
Report what you find here: -
Settings - About Phone - MIUI version
Possibility of a vendor rom on the device?
corkiejp said:
What is your current rom?
Report what you find here: -
Settings - About Phone - MIUI version
Possibility of a vendor rom on the device?
Click to expand...
Click to collapse
Hi, my current rom is: MIUI version: MIUI Global 8.0 | Stable 8.0.1.0(LHOMIDG)
Thanks for response
Helle, thanks for response. I have downloaded that rom, but cannot install it on my device. Do you know how to do that? I have sometimes problems with MiFlash.. Sometime it works, and sometime it gives error message about hello packet.
dlkrsn42 said:
Hi, my current rom is: MIUI version: MIUI Global 8.0 | Stable 8.0.1.0(LHOMIDG)
Thanks for response
Click to expand...
Click to collapse
That looks like an official rom. Have you checked your APN settings for your network?
dlkrsn42 said:
Helle, thanks for response. I have downloaded that rom, but cannot install it on my device. Do you know how to do that? I have sometimes problems with MiFlash.. Sometime it works, and sometime it gives error message about hello packet.
Click to expand...
Click to collapse
For xiaomi.eu roms, you need to unlock your bootloader officially and flash the rom through TWRP.
corkiejp said:
That looks like an official rom. Have you checked your APN settings for your network?
For xiaomi.eu roms, you need to unlock your bootloader officially and flash the rom through TWRP.
Click to expand...
Click to collapse
I have an unlocked bootloader and TRWP, but cannot install an EU rom, can you help me with that?
@dlkrsn42 First take backup, because flashing xiaomi.eu rom will require a wipe of data.
Put the xiaomi.eu rom zip (intact not extracted) on your external sdcard.
Boot TWRP.
Wipe Data and cache Partitions
Select Install and choose the xiaomi.eu rom zip (from sdcard).
Swipe to Install
Reboot
corkiejp said:
@dlkrsn42 First take backup, because flashing xiaomi.eu rom will require a wipe of data.
Put the xiaomi.eu rom zip (intact not extracted) on your external sdcard.
Boot TWRP.
Wipe Data and cache Partitions
Select Install and choose the xiaomi.eu rom zip (from sdcard).
Swipe to Install
Reboot
Click to expand...
Click to collapse
I tried, but it doesnt work good. It gets bootloop
@dlkrsn42 First boot of the rom, can take 15 to 20 mins.
What version of TWRP are you using? Try the official version: - https://twrp.me/devices/redminote3.htm
Did you download the correct version of the rom for kenzo?
Did you check the MD5 of the rom, to make sure it wasn't corrupted in the download.
Your bootloader might have been locked again by the flash, so you will have to unlock it again using MIunlock tool!
---------- Post added at 10:13 PM ---------- Previous post was at 09:30 PM ----------
corkiejp said:
Have you checked your APN settings for your network?
Click to expand...
Click to collapse
@dlkrsn42
See you have open a new discussion here: -
https://xiaomi.eu/community/threads/redmi-note-3-no-service-sim-card.35527/
corkiejp said:
@dlkrsn42 First take backup, because flashing xiaomi.eu rom will require a wipe of data.
Put the xiaomi.eu rom zip (intact not extracted) on your external sdcard.
Boot TWRP.
Wipe Data and cache Partitions
Select Install and choose the xiaomi.eu rom zip (from sdcard).
Swipe to Install
Reboot
Click to expand...
Click to collapse
dlkrsn42 said:
I tried, but it doesnt work good. It gets bootloop
Click to expand...
Click to collapse
after flash eu rom, don't forget to flash lazy flasher to remove dm-verity & forced encryption on miui mm rom. cmiiw.
abihary said:
after flash eu rom, don't forget to flash lazy flasher to remove dm-verity & forced encryption on miui mm rom. cmiiw.
Click to expand...
Click to collapse
Not required for xiaomi.eu roms on devices that are officially unlocked. Never had to use the above on my device.
corkiejp said:
Not required for xiaomi.eu roms on devices that are officially unlocked. Never had to use the above on my device.
Click to expand...
Click to collapse
sure you didn't need it if you coming from official miui either global or china version, then switch into eu rom.
different story if you coming from cm/aosp rom. eu rom will locked your bootloader even officially unlock, this happened to me once. after flashing eu rom from cm, i directly reboot it. guess what, stuck at mi logo & fastboot mode. checked my bl, it's locked again and should be unlocked.
will be more safe if you suggest to flash it after rom due to we didn't know those ppl coming from miui/cm/aosp and which twrp used.
corkiejp said:
@dlkrsn42 First boot of the rom, can take 15 to 20 mins.
What version of TWRP are you using? Try the official version: - https://twrp.me/devices/redminote3.htm
Did you download the correct version of the rom for kenzo?
Did you check the MD5 of the rom, to make sure it wasn't corrupted in the download.
Your bootloader might have been locked again by the flash, so you will have to unlock it again using MIunlock tool!
---------- Post added at 10:13 PM ---------- Previous post was at 09:30 PM ----------
@dlkrsn42
See you have open a new discussion here: -
https://xiaomi.eu/community/threads/redmi-note-3-no-service-sim-card.35527/
Click to expand...
Click to collapse
Yes, but i gonna delet it from there, nobody gives reply. In meanwhile i have did a research and find the problem (i think). Ik have flashed my Phone to an Global rom (kenzo), but i need to install the global rom version for redmi note 3 special edition (kate). I have find this update package, but cannot not install it. I have asked permission to xiaomi to unlock my bootlaoder (officialy), i hope to get a postive answer and after that, i actualy dont know how to update my Phone with the Kate rom.
You know how i can do this? Or somebody else whos reading this. Please help me
@abihary First thing i did when I got my device was to flash global dev, to unlock. And flashed xiaomi.eu rom. Didn't need to patch boot. Have updated by dirty flashing about 11 weekly roms and didn't encounter any problems.
If your device has been on CM firmware, then you probably need to flash official roms first before flashing xiaomi.eu rom and would need the lazy flasher.
Xiaomi.eu Marshmallow roms cause the bootloader lock if coming from lollipop.
@dlkrsn42 "Kate" Model doesn't have an xiaomi.eu rom (probably never will due to only official global roms for it).
No wonder your device boot-looped when flashed with a "Kenzo" rom.
The rom you listed earlier was for "Kenzo"
dlkrsn42 said:
Hi, my current rom is: MIUI version: MIUI Global 8.0 | Stable 8.0.1.0(LHOMIDG)
Click to expand...
Click to collapse
If you do have the "Kenzo" and unlocked unofficially, there was extract steps required to successfully flash xiaomi.eu rom.
See here.
Edit: It is advised to be officially unlocked for xiaomi.eu marshmallow roms
If you have "Kate" check here to flash an official rom by EDL. Doesn't need to be unlocked to do so. But use a fastboot rom.
Out of curiosity while in fastboot mode, what does the following report?
Code:
fastboot getvar product
corkiejp said:
@abihary First thing i did when I got my device was to flash global dev, to unlock. And flashed xiaomi.eu rom. Didn't need to patch boot. Have updated by dirty flashing about 11 weekly roms and didn't encounter any problems.
If your device has been on CM firmware, then you probably need to flash official roms first before flashing xiaomi.eu rom and would need the lazy flasher.
Xiaomi.eu Marshmallow roms cause the bootloader lock if coming from lollipop.
@dlkrsn42 "Kate" Model doesn't have an xiaomi.eu rom (probably never will due to only official global roms for it).
No wonder your device boot-looped when flashed with a "Kenzo" rom.
The rom you listed earlier was for "Kenzo"
If you do have the "Kenzo" and unlocked unofficially, there was extract steps required to successfully flash xiaomi.eu rom.
See here.
Edit: It is advised to be officially unlocked for xiaomi.eu marshmallow roms
If you have "Kate" check here to flash an official rom by EDL. Doesn't need to be unlocked to do so. But use a fastboot rom.
Out of curiosity while in fastboot mode, what does the following report?
Code:
fastboot getvar product
Click to expand...
Click to collapse
Hello, thanks for the information. The fastboot getvar product code results in Kenzo. I will tell you short my situation:
I and my friend have orderd the xiaomi redmi note 3 (snapdragon). I had installed everything but with a reason i dont know my phone doesnt accepted the lockscreen pin. This is the pin i used several years on different phones, so my phone was not able to use. I have did a research and found fastboot and fastboot roms for Kenzo. I have did this and know i have problems with my simcard (no service) and camera that doesnt work.
i asked my friend to send me a screen shot of his "about phone" menu (we both got the same phones). His phones shows this: "MIUI Global | 7.5 Stable 7.5.2.0 (MHRMIDE)" and my phone shows now (after update) "MIUI Global 8.0 | Stable 8.0.5.0(LHOMIDG)". I did an research on his version (MHRMIDE) and find the international version (Kate). Well i have buyed that phone also, sow i am thinking that my phone now doesnt support my provider (but i dont know why camera doesnt work..). Sow i am now out of options. I have find an tutorial (https://www.youtube.com/watch?v=7TufbuneNl4) to install MHRMIDE rom from TWRP recovery. On the youtube movie its going all good, but not when i try it. Can it be because o dont have official unlocked bootloader?(i am still waiting on an sms from Xiaomi). And everything was working very fine when i received the phone.
I will very happy of someone can help me to fix it. Can it something with baseband or kernel? I am not an expert like you guys... I hope this story is clear and understandable..
@dlkrsn42 If you and your friend have exactly the same phone and it is the same size.
Then if you flashed a "kenzo" rom onto a "Kate" model, It is probably incorrectly telling the wrong product version in fastboot.
That would also explain why your not getting no service as the kate has different modem firmware.
As I suggested earlier you will need to flash a Fastboot rom for "kate" in EDL mode, can be done without unlocking the bootloader.
Edit: The video you linked is a guide to put the "Kate" rom on a "Kenzo" and is not recommended because it won't unlock the extra bands.
corkiejp said:
@dlkrsn42 If you and your friend have exactly the same phone and it is the same size.
Then if you flashed a "kenzo" rom onto a "Kate" model, It is probably incorrectly telling the wrong product version in fastboot.
That would also explain why your not getting no service as the kate has different modem firmware.
As I suggested earlier you will need to flash a Fastboot rom for "kate" in EDL mode, can be done without unlocking the bootloader.
Edit: The video you linked is a guide to put the "Kate" rom on a "Kenzo" and is not recommended because it won't unlock the extra bands.
Click to expand...
Click to collapse
Hello, thanks for fast response. Well ı tried to flash a kate rom, but it doesnt work. Do you have any idea what i can do? Because when i ordered the phone, it is selled as an international phone amd it was also working good till i have flashed a kenzo rom.
Have you tried the EDL Mode method with a fastboot rom.
Here are instructions for that method, just make sure you use Special Edition Fastboot rom.
I find that the sim isn't recognized when booted up. You need to enter airplane mode then deactivate it for the phone to register the sim
Hi experts. I have bought mi 6 from China which came with a Chinese ROM, to which I have now installed GooglePlay somehow. I now want to install the global ROM on it but there seems to be a problem. I have tried installing the available global ROM via the updater app on the phone (as mentioned on the website) but it won't allow me because the global ROM version is older than the present Chinese ROM running on my phone:
(GLOBAL: miui_MI6Global_V8.2.2.0.NCAMIEC_7f3f8ad7c8_7.1)
(Chinese: miui_MI6_V8.2.27.0.NCACNEC_e725f9829f_7.1)
Is there any way to install the global ROM without unlocking the phone? Fastboot ROM also requires unlocking the phone. I seriously don't want to unlock it...
Experts please advice what should I do?
Try using the EDL mode via the EDL cable. It should work on Mi series
I have Mido SD 32/3GB on MIUI 8.2.10.0.0.
When I check for updates in Updater app it gives me no update,and on MI site download page for Redmi Note 4X global there are 8.5.4.0 version. I have manualy downloaded 8.5.4.0 update and put it in internal and external memory and tryed "choose update package" option.Nothing,MIUI says "can't verify update.current version is illegal,only allowed to flash stable version".I have tried MIUI 9 7.8.24...same thing. The fone is all stock.But the bootloader is factory unlocked.
Anybody has solution??? Thanks.
milan978 said:
I have Mido SD 32/3GB on MIUI 8.2.10.0.0.
When I check for updates in Updater app it gives me no update,and on MI site download page for Redmi Note 4X global there are 8.5.4.0 version. I have manualy downloaded 8.5.4.0 update and put it in internal and external memory and tryed "choose update package" option.Nothing,MIUI says "can't verify update.current version is illegal,only allowed to flash stable version".I have tried MIUI 9 7.8.24...same thing. The fone is all stock.But the bootloader is factory unlocked.
Anybody has solution??? Thanks.
Click to expand...
Click to collapse
Hey man, you have a Fake/tampered Rom
Take a look at this:
http://en.miui.com/thread-392159-1-1.html
For stable rom , needed about 3 decimal points. Not more than that
You need to use MIFLASH tool to flash the original rom. Make sure to unlock bootloader first (i think its already unlock thou).
Flashing guide:
http://en.miui.com/thread-565784-1-1.html
Thanks,I was thinking about using MIFLASH.
Yes, bootloader is (factory ??? ) unlocked.I buy it like that.
(why would seler temper with ROM? my Mido is chinese 2016101 and I live in Serbia/East Europe.couldn,t they just flash Global rom.I buy from them Redmi 4a for my wife,and it was OK.Updated fine to latest ROM.)
Didn't know about 3 decimal rom rule.
milan978 said:
Thanks,I was thinking about using MIFLASH.
Yes, bootloader is (factory ??? ) unlocked.I buy it like that.
(why would seler temper with ROM? my Mido is chinese 2016101 and I live in Serbia/East Europe.couldn,t they just flash Global rom.I buy from them Redmi 4a for my wife,and it was OK.Updated fine to latest ROM.)
Didn't know about 3 decimal rom rule.
Click to expand...
Click to collapse
Xiaomi have no official retail stores yet (except at India thou) so they let those f*ck up resellers to buy their phones and do whatever they want to sell it.
If the reseller bought those phones directly from China with chinese miui rom , tendency it will modified to english with playstore installed.
Sorry for that lol ,
Now try miflash if it works :fingers-crossed:
MIFLASH did the trick. I'm now on 8.5.4.0.
How to know the bootloader is lock or unlock?
And is there any tutorial i can follow on how to install rom from fake to official?
Frawz said:
How to know the bootloader is lock or unlock?
And is there any tutorial i can follow on how to install rom from fake to official?
Click to expand...
Click to collapse
To flash an official ROM (stable or developer, chinese or global) over an unofficial one, you need an unlock bootloader and follow this guide.
If you are using an unofficial ROM, like those fake MIUI ROMs (bad) or Xiaomi.eu ROMs (better than official), you have already an unlocked bootloader.