Hey, I've got a tablet from a company called "Que" and it's stuck in bootloop now I tried alot of different key combinations and nothing works also I tried to connect it to my PC and use adb but adb said I need to tap confirm on a confirmation dialog in my device but I can't becuase he's in a bootloop.
If anyone got any tips or a way to help me that would be great.
Thanks
Related
I was having trouble with ADB on my newly acquired ViewSonic ViewPad E100. I thought rooting it and/or installing a new OS/ROM might help.
I saw this thread:
http://forum.xda-developers.com/showthread.php?t=2021203
Where someone pointed a guy to a universal root tool:
http://forum.xda-developers.com/showthread.php?t=1886460
I got the tool to run, and tried to use the #1 - New Standard Root - it got as far as to reboot the device.
Maybe I wasn't in trouble yet. But I waited for a bit and the device was still on the "ViewSonic" boot animation. I stupidly pulled the usb plug out to check out the device closer. It didn't boot. Then I restarted. I can no longer get farther than the "View Sonic" boot animation.
Okay, I know there's some special boot methods in Android, so I try a bunch of key combinations. Power+volume down doesn't seem to do anything [yet] but when I press Power+volume up, I get the android guy with a red exclamation in his belly:
http://i.stack.imgur.com/kcSE4.jpg
It's possible I see a flash of a better image, like this one:
http://www.android-hilfe.de/attachm...ery-rotes-warndreieck-2012-09-22-03.41.16.jpg
So no idea what to do. I figured it couldn't get much worse, so put a recovery "update.img" for a gtab on an SD card and then tried to reboot, with holding vol+power, just power, no luck with any combination.
Then I discovered 'nvflash'
http://raywaldo.com/2011/01/nvflash-for-dummies/
I think I'm following the steps right (for a gtab at least), but I can't get into APX mode. I can get *something* when I hold vol-down+power, I actually get my computer (Windows) to show me some internal storage of the device I guess... There's no way for me to install APX drivers, and I don't see the screen "flash" either, just sometimes I get USB storage attached.
Can I recover from this? Are there any more things I should be trying? Does anyone else out there have this device? Where else can I look for help? I just got this device this week and was hoping to use it for development!
Thanks in advance.
So a friend recently bought this spanish voxter tab 97 IPS (16GB) and after a few days of usage and several attempt to install a custom ROM, the tablet stopped booting. According to him, he tried loading a "compatibility bla bla bla.zip" file with CMW which I really do not know what it is, and since he did the installation, the tab stopped booting into system. Every time it's turned on, it just stops at the boot screen and nothing more. Although before this, he had installed a custom recovery and had also done a Nandroid backup with the recovery. However, what baffles me is, CMW is no longer accessible through the normal "power + volume up" key combo and I'm quite unsure of how to boot into fastboot.
That aside, I tried booting into recovery with adb because apparently, adb recognizes the device whenever it's stuck at boot screen, this also failed, neither did rebooting into fastboot via adb work. All I need to know is if this device is totally bricked, or if there's still something I can do. If there's any, I really would appreciate every help offered. Thanks..
hi thx in advance i need some help with android hipstreet phoenix tablet it boots but when it gets to hipstreet logo it doesnt go any further like it just hangs there forever trying to load,i can enter recovery but nothing in there has helped,when hooked up to computer nothing shows on computer but you can see it in device manager,when i run adb it do not list the device when issue adb devices command im stuck basicaly how can i get this tablet to boot with out resetting and losing everything thats on the tablet that bit im trying to avoid i need the photos and videos from it ,or is there a way i can get the files of then resetting wouldnt be a problem can anyone give me any advice
Hello, I'm new here. I have rooted my new fire 7in 5th gen tablet. I used the flashfire beta app to flash a rom which I found out that the rom had bugs, so I decided to install cm12.1 using the same app, but the app glitch when it started installing the rom meaning it didn't finish and kept installing. I decided to power it down and reboot it back up. It showed the cyanogemod logo booting with animation but nothing booted up. It kept booting like a bootloop. I restarted it multiple times and the same errors keep happening. I tried go into recovery mode by holding the volume up + power button at the same time when i was boot it up. it only went to amazon logo and not recovery. I also plugged in the device to the computer using my factory cable to see if I'm able to enter fastboot mode. It worked, but it wouldn't allow me to flash anything. The tablet greeted me a message saying flash not allow, but the commands were able communicate with fast-boot and cant get it into adb because the boot loop. I had actually enter fastboot mode using commands which worked. Sometimes when i type a different command it said failed remote. Some commands actually worked but I don't what other commands to use to fix it. It has been 10 months since this happened to me. I'm not willing to give up on it because their has to be alternative ways of bypassing these issues. Is their any way you guys can tell me how to fix this? Thank you.
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.