Related
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
bokivaol said:
Phone turns on even if I just plug in usb to phone (one end is in the PC and when I plug in other end into the phone, phone turns on). What is wrong guys?
Click to expand...
Click to collapse
Happened to me b4 if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Leave your phone plugged in and press POWER-HOME and BACK all together, as soon as the screen turns completelly black (backlight off too) releast POWER and HOME, and leave the back-button pressed, that will probably work too.
LukBoy99 said:
if u want to repair with pc comp just remove the battery till u reach connection step then quickly connect battery and cable (nvm the cover) and hold back button when connecting if u do fast enough will work
Click to expand...
Click to collapse
Can you explain me a little more detailed, i didn't get you very well. I am noob
How do you mean until I reach connection step, where should I reach connection step?
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
SmG67 said:
You take out the battery, then you go into PC Companion and follow the steps to repair your phone, until it asks to connect your phone in flash-mode.
Then do as he said (put the battery in etc.)
Click to expand...
Click to collapse
It doesn't work.
I tried and POWER-BACK-HOME buttons while the phone is plugged in (turned off and turned on), same sh..t. Phone starts like that I powered it on
stitypta had
What do you think, what will happened if I wipe it using CWM? Can I brick it on that way?
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
SmG67 said:
If you mean formatting your phone, so you don't have a system on there anymore... that probably will give you a brick. Flashmode is a hardware feature, implemented to install firmware and enable reparations to your phone's software.
Deleting everything you can will not magically solve your problem, as far as i know.
It might help if you get mad at the phone and abuse the back-button by repeatedly pressing it when connecting the phone.
Click to expand...
Click to collapse
Does this mean that I have hardware problem. Phone works without any problem.
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
SmG67 said:
Somehow it doesn't detect you pressing the back-button, maybe there is some dust or dirt inbetween the contacts or something, since you flashed sucessfully before i don't think it's a serious hardware-problem.
Click to expand...
Click to collapse
I didn't flashed it before, I couldn't do that. I couldn't unlock bootloader, because I couldn't boot it in flash mode (phone just show that battery charging), after installing CWM now phone even don't show that battery is charging (it turns on when I plug in USB in the phone without holding any button). This is nightmare!
You are still on the original firmware then?
I mean, your phone still works?
SmG67 said:
You are still on the original firmware then?
I mean, your phone still works?
Click to expand...
Click to collapse
Yes, I am on original firmware and phone still works, but I have problem to boot it in flash mode. When I plug in USB cable in the phone it turns on, like that I pressed POWER button. I don't press any button, but when I plug in usb cable 10-20 seconds and phone is on.
Yes, because your phone detects the usb-cable getting plugged in, even when it's off, it thinks you want to charge it, so (normally) it loads the kernel in order to start the charging-process, that is normal behaviour. I have been on a kernel that didn't support that feature, and it booted into the full rom before it started charging.
In short: the usb-port also functions as a power-button, sort off
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
Yes, the back button works perfect, closing apps (not close apps, but back to the phones "desktop"), back to previous pages in browser...
I am concerned because, before I installed CWM , when it was OFF and plugged in on USB, phone just showed black screen and when I clicked on some button I could see that battery is charging, that was all. Now, when I plug in USB it turns on like I pressed POWER button.
And off course never booted in flash mode because it turns on
SmG67 said:
Does the back-button work normally when you're on the firmware? (Like, open the app-drawer, pressing back-button should close it?)
Click to expand...
Click to collapse
What is app-drawer, I don't know what is that.
oh, that's the bit where you find all your installed apps, the grid you see when you press on the little triangle on the bottom of your desktop, or swipe up on the desktop.
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
SmG67 said:
I honestly don't know why your phone won't go into flash-mode though. Maybe try to take out your battery for about 10 minutes so your phone gets rid of all charge and static, and then try again.
Click to expand...
Click to collapse
I solved problem about POWER-ing on when I plug in USB. I installed new ROM "MiniCM7Pro_V21_Paul_XXX" via CWM because I didn't need to boot it in flash mode and now when I plug in USB I got that it charging battery and orange led diode.
But I can't boot it in flash mode even with new ROM, all the time orange led diode when I hold back button and plug in USB. I wiped out all date except something about "battery" from Advanced CWM options.
bokivaol said:
Hello comrades,
I have xperia x10 mini pro. I rooted phone with Flashtool and installed CWM. I tried to boot it in flash mode (turned off phone, back button held and plugged in USB into the phone), but what I get is that my phone turned on always, like that I pressed Power button.
Earlier I couldn't boot it into the flash mode and I got that I charging battery, but after I installed CWM, phone always turns on.
Due to, I can't re-flash it because it always turns on. I tried with flashtool, PC companion, SEUS but all software need that I turn off phone and then hold back button and plug in usb and what I get is turned on phone. Please help me how to fix this problem.
I would like to re-flash it to stock 2.1.1.A.0.6 (2.1-update1).
Click to expand...
Click to collapse
i dont have time to read if this was resolved but you need to leave your phone of for about 2 min the little bugger holds a charge for quit a bit you got one of the newer ones like mine i got this info from sony website at least 30sec power off before attempting to do the above steps also i do know how to get the phone out of this refer to the this thread http://forum.xda-developers.com/showthread.php?t=1635286&page=2 i only know this cause iam you !! lol as soon as i find a stock rom boom i am
http://minus.com/lbg0XZRW728Kwu ling for stock rom bro
follow step for step with the referance link above to reflash stock rom thanks that dude that told me
and it works cause i rebricked it lol i reflashed the same rom that did this to my phone and so far all above steps in referance link seem to be working"
http://forum.xda-developers.com/showthread.php?t=1636504 follow to the t you hav i.c.s 4.0 i guess works like a charm ! between both guides 25 min !!! yesterday i put 7hrs !! enjoy bro and thank thank the guys that root me they are the true credit iam just passing the info on too you that i got from both guides. look at my post and you will see i had this problem follow these steps and you will be fine remeber firs boot is the longest
best thing that ever happened to me was i bricked my my xperia mini pro u20 haha got ics out it lol
Xperia S Issues. Bad Flash
Hi, I read the 'existing users' installation instructions on the Sspeed ICS rom and installed the rom without installing the ics rom and kernel (I was tired). When booting, I go in a bootloop with the doomkernel screen. I can access recovery fine.
When holding vol+ and connecting to PC the phone goes back into it's bootloop and does not boot into fastboot.
When holding vol- and connecting to PC the phone flashes the green led and then boots into bootloop.
If I wait until the phone vibrates and lights up blue I can press the button to access recovery. I thought I could then just copy a gb rom over using USB mount but it is not detected on the PC.
Any help would be greatly appreciated.
Thank you
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
Thanks but like I say fast boot and flashmode don't work so I can't access this option
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
arc_u said:
Try flashing stock ICS rom with flashtool
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
unrealboot1 said:
I have the same problem too... I was hoping it would just work, but apparently it doesn't it needs a base rom.....I'm at work at the moment so i cannot fix my phone(i flashed it while at work which i shouldn't have done...) i noticed you can put it into fast boot in recovery - go to reboot options then fast boot can you see if that works
Click to expand...
Click to collapse
Hi thanks for your reply. I've tried going to fastboot
from recovery and I get a blue flashing light for one flash then it boots up again. Am I able to do anything at that point?
Glad I'm not the only stupid one on here
im not the expert here but I have bricked other phones before but never an xperia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone. It should be mount and storage menu -> mount usb storage, then leave it on that menu and connect to computer, see if that works
unrealboot1 said:
im not the expert here but I have bricked other phones before but never an experia phone before. I have been reading up, the doom kernel has some mounting options, try to mount the sd card as mass storage so pc can send files accross to the phone.
Click to expand...
Click to collapse
Hi is this by the mount USB storage optuon ? I tried that and it wasn't detected on the PC. I could try another PC later. Recovery went into mount mode fine but nothing happened on the PC. Not even a blank drive which I know some people have had
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
K900 said:
If it blinks the LED for a second and reboots, that means that you don't have the drivers. Install drivers that are bundled with flashtool and try again. Or use Linux / OSX.
Click to expand...
Click to collapse
I've used the laptop I'm trying it on for unlocking the boot loader and rooting. Maybe something corrupted the drivers. Will try on my Linux machine when I get home.
Thank you for all the help so far
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
doesn't work...after the 3 beeps i let go and the screen turns black but then the boot loop happens again, i cant turn the phone off
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
Hi, I do get the 3 vibrates and the phone stays off but instill got the individual quick flash then boot up.
Apologies mine stays off too, i just had it on charger so it turns on again after the 3 beeps, once off the charger it will turn off....I will be trying stuff when i get home.
Androxyde said:
Just Press VolUp and Power button until you get (one vibration followed by 3 consecutive vibrations) ... it will mean phone is shutdown.
Once shutted down, you will be able to press VolDown while plugging phone to PC and it will enter into flashmode.
Then you will be able to flash a FTF using flashtool
Click to expand...
Click to collapse
This will work, cause I had a similar issue a while ago
Good luck
depulle87 said:
This will work, cause I had a similar issue a while ago
Good luck
Click to expand...
Click to collapse
correct
Hello. I've got familiar problem. My phone blacked out after one day having about 35 % battery full. I was trying to reset it by holding power and volume up buttons - nothing happened. Just once showed up Sony logo but then again black nothing. Then it vibrate 3 times quickly and from that time it is shutted down, won't turn on even in flashmode. LED is not working too. I was asking for advice in local store servise and guy told me, that new phones have to be at least 30 min on the charger. So it's here now for hour, no result. :/
Just fixed this issue.
Follow these steps
1.hold vol up + power until phone vibrates 3 times.
2.open flash tool and point towards your stock file.
3.hit okay
4.wait for flash tool to prepare the files then it will prompt you to connect device in flash mode( vol down + power)
5.wait for it to finish. Unplug reboot and there you go fixed...
Hope this helps
Sent from my LT26i using Tapatalk 2
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Alikalix said:
Cant do that, because PC dont recognize the phone. Phone has just red LED, thats all.
Click to expand...
Click to collapse
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Bin4ry said:
Use the bundled wallcharger!!! not a PC, pc has too less power to charge it now!
After wallcharger is placed hold vol+ and power for a few seconds until 3 vibrations, then let the phone on charger for atleast 2 hours, if all is good phone will bootup to the "charging animation"
Regards
Click to expand...
Click to collapse
Something similar happened to me. I have the bugged version of chargemon (only can charge with phone on) and accidentally discharged completely. The phone didn't boot, didn't charge and didn't do the 3 vibrations thing. So I put the battery off, conected the wall charger, putted the battery and it booted
It's really easy to remove the battery, you just need to be careful
hi guys,
first, i know that the title is typical but i searched the the forum for my problem and i couldnt find any help so please hear me out!
i've been using xperia sola for over 5 months now and also been using the Ultimate V11 JB ROM, everything was ok till 2 days ago. at first it started with hanging and then restarting itself but now it still hangs at anywhere possible but it doesnt restart itself and none of the keys work so i cant hard reset it too!
i flashed it to stock rom, didnt work. tried the new NovaThor JB ROM and still nothing. the problem still exist.
now it wont turn on completely. tried with the another charger thing but i get a red light for 1 sec and then nothing.
plz help, its somewhat urgent!
ardalan1991 said:
hi guys,
first, i know that the title is typical but i searched the the forum for my problem and i couldnt find any help so please hear me out!
i've been using xperia sola for over 5 months now and also been using the Ultimate V11 JB ROM, everything was ok till 2 days ago. at first it started with hanging and then restarting itself but now it still hangs at anywhere possible but it doesnt restart itself and none of the keys work so i cant hard reset it too!
i flashed it to stock rom, didnt work. tried the new NovaThor JB ROM and still nothing. the problem still exist.
now it wont turn on completely. tried with the another charger thing but i get a red light for 1 sec and then nothing.
plz help, its somewhat urgent!
Click to expand...
Click to collapse
Now try to charge it full
If can't try to reflash the Stock ICS ROM
ardalan1991 said:
hi guys,
first, i know that the title is typical but i searched the the forum for my problem and i couldnt find any help so please hear me out!
i've been using xperia sola for over 5 months now and also been using the Ultimate V11 JB ROM, everything was ok till 2 days ago. at first it started with hanging and then restarting itself but now it still hangs at anywhere possible but it doesnt restart itself and none of the keys work so i cant hard reset it too!
i flashed it to stock rom, didnt work. tried the new NovaThor JB ROM and still nothing. the problem still exist.
now it wont turn on completely. tried with the another charger thing but i get a red light for 1 sec and then nothing.
plz help, its somewhat urgent!
Click to expand...
Click to collapse
only once the red light is blinking or it is continuously turning on when you are connecting the charger..if it is turning on then charge your mobile
for 3-4 hour..if that is not the case then try flashmode and fastboot mod..and when you are pressing power button are you getting any vibration??
if there above things dont work then your device may have hard bricked for which you have to take your device to service center...good luck
bibhu059 said:
only once the red light is blinking or it is continuously turning on when you are connecting the charger..if it is turning on then charge your mobile
for 3-4 hour..if that is not the case then try flashmode and fastboot mod..and when you are pressing power button are you getting any vibration??
if there above things dont work then your device may have hard bricked for which you have to take your device to service center...good luck
Click to expand...
Click to collapse
the red blinking light apears everytime i connect the charger, but for 1 sec. but now when i connect it to wall charger no red light but when i connect it to pc usb the red light apears and now it stays and doesnt go away. does this mean it is charging?!
how can i fix it with flashmode or fastboot?!
i dont think it is bricked because it was working fine 2 days ago and suddenly it started restarting!
then try to enter into flash mod by pressing the vloume down button and simultaneously connect the usb to the pc...if it is working then flash the stock ftf...if by connecting the cable to the phone through pc led is showing constantly then keep it remain like that for 3-4 hours..it might get charged.
bibhu059 said:
then try to enter into flash mod by pressing the vloume down button and simultaneously connect the usb to the pc...if it is working then flash the stock ftf...if by connecting the cable to the phone through pc led is showing constantly then keep it remain like that for 3-4 hours..it might get charged.
Click to expand...
Click to collapse
i tried the volume down thing but it didnt work, couldnt flash my phone.
i connect it to pc and the red light appears but it disappears after 10 minutes and i have to disconnect and then connect it again to get the red light!
its on the OS, could happen any time. Probably bootloop.
install flashtool
download ICS stock room
click the lightning on the flashtool and locate where you have put the ICS stock room.tft
hold down volume before connecting the cable to the phone.
then wait till the stockrom flash correctly.
-waiting feedback
skyfast said:
its on the OS, could happen any time. Probably bootloop.
install flashtool
download ICS stock room
click the lightning on the flashtool and locate where you have put the ICS stock room.tft
hold down volume before connecting the cable to the phone.
then wait till the stockrom flash correctly.
-waiting feedback
Click to expand...
Click to collapse
tnx but the problem is computer doesnt recognize the phone!
install first the driver, its in the flashtool
skyfast said:
install first the driver, its in the flashtool
Click to expand...
Click to collapse
it's not bcuz of the drivers. the phone doesnt even boot to be recognized!
ardalan1991 said:
it's not bcuz of the drivers. the phone doesnt even boot to be recognized!
Click to expand...
Click to collapse
its easy to recognize it, hold turn-off button and volume-up until 3 vibrations = force turn-off
if already turn-off
then hold volume-down before inserting the cable.
--feedback
skyfast said:
its easy to recognize it, hold turn-off button and volume-up until 3 vibrations = force turn-off
if already turn-off
then hold volume-down before inserting the cable.
--feedback
Click to expand...
Click to collapse
none of those buttons work! i hold the power off and the volume-up button but nothing happens!
the only thing thats working in my phone is the red LED light when i connect it to charger! although it disappears after 10-15 minutes and i have to disconnect and reconnect it again!
ardalan1991 said:
none of those buttons work! i hold the power off and the volume-up button but nothing happens!
the only thing thats working in my phone is the red LED light when i connect it to charger! although it disappears after 10-15 minutes and i have to disconnect and reconnect it again!
Click to expand...
Click to collapse
im sorry but your talking about the computer doesnt recognize your device lately, how will it recognize if it is connected to the charger and not on the PC
ardalan1991 said:
none of those buttons work! i hold the power off and the volume-up button but nothing happens!
the only thing thats working in my phone is the red LED light when i connect it to charger! although it disappears after 10-15 minutes and i have to disconnect and reconnect it again!
Click to expand...
Click to collapse
DUDEEEEEEE CALM DOWN AND LISTEN. THE FIRST SIGN OF AN XDA NOOB IS TO PANICK WHEN HIS/HER PHONE IS BRICKED.
Listen to the advice of @skyfast as what he said is completely correct. Try his suggestions and update us. Flash Mode will work regardless of what state. Hold volume down then connect the cable to enter flash mode.
Sent from my LT22i using xda premium
skyfast said:
im sorry but your talking about the computer doesnt recognize your device lately, how will it recognize if it is connected to the charger and not on the PC
Click to expand...
Click to collapse
WHAT!?! it's like you're talking chinese to me right now!
either i connect it to wall charger or pc the only thing i get is a red stable light which disappears after 10-15 min. and computer doesnt recognize the phone when i connect it to PC!
AndroidNoob69 said:
DUDEEEEEEE CALM DOWN AND LISTEN. THE FIRST SIGN OF AN XDA NOOB IS TO PANICK WHEN HIS/HER PHONE IS BRICKED.
Listen to the advice of @skyfast as what he said is completely correct. Try his suggestions and update us. Flash Mode will work regardless of what state. Hold volume down then connect the cable to enter flash mode.
Sent from my LT22i using xda premium
Click to expand...
Click to collapse
plz read my answers too! i said it before that i tried all the combo buttons and they dont work! my phone doesnt respond to any of them. i tired the PowerOff + Volume Up, the PowerOff + Volume Down, i tired connecting it to pc with both Volume Up and Volume down but none of them work!
i know that my sola is bricked and all i need to know is the correct and step by step way to fix it. plz!
You seem to have the same problem with @MegaSharkXDA
Sent from a JB Moonbreaker 3.5 device
http://forum.xda-developers.com/showthread.php?t=1849170
check here, hope you can fix your phone.
hey man you can wipe system data and dalvik and then formate system this happend for me once and then flash the ics stock so you can boot to ics and if you booted wait a while and then flash any custom rom you must wait cuz this time my sola was bootlooping if any custom kernel was seted up
wish i helped
hi..i have a problem with my z2..it wont turn on..when plug into charger..the display turn on for a couple second without showing anything and then only led turn on..showing red..orange or green depends on battery i guest..i wanna try to flash it using flashtool...when i try to flash it..i get stuck at hold volume down button...it wont detect my phone..i cant enter flashmode..but..at the script..it said..devices connected with usb debugging off..driver was succesfully installed..so this is some question from me..hope you guys could help me to solve this..
1)what actually happened to my phone??
2)if i need to turn usb debugging on to flash my phone..how do i turn it on??..bcoz my phone wont turn on..
3)do you have another solution..beside flashtool??
thanks...
Hi,
You could give PC Companion a try or Sony's Emma.
@soka said:
Hi,
You could give PC Companion a try or Sony's Emma.
Click to expand...
Click to collapse
pc companion and emma also dont detect my z2..i cant connect it in flashmode..anyway thank..any other suggestion?
Download this
http://forum.xda-developers.com/showthread.php?t=2635830
install the drivers and try flashmode again.
Do you perhaps know if your bootloader is unlocked?
If so try to get into fastboot mode ( volume up ) and flash a custom kernel like androplus that has recovery.
Then flash a stock pre-rooted zip.
@soka said:
Download this
http://forum.xda-developers.com/showthread.php?t=2635830
install the drivers and try flashmode again.
Do you perhaps know if your bootloader is unlocked?
If so try to get into fastboot mode ( volume up ) and flash a custom kernel like androplus that has recovery.
Then flash a stock pre-rooted zip.
Click to expand...
Click to collapse
still cannot enter into flashmode....i heard the sound from windows that my phone is connect..but not in flashmode..and also cant enter any storage...when i check at device and printer..it just show android..instead xperia z2..and cant do anything with it...i never unlocked the bootloader before...thanks..any other way buddy?
Hi dude.
Try to press and hold power and volume up buttons together for a 10 seconds until your phone vibrate 3 times,maybe help.
Ofcourse,your battery must me charged even 10 %.
Allek84 said:
Hi dude.
Try to press and hold power and volume up buttons together for a 10 seconds until your phone vibrate 3 times,maybe help.
Ofcourse,your battery must me charged even 10 %.
Click to expand...
Click to collapse
already tried...didnt vibrate..also tried red small button near sim card slot..nothing happens too...the only thing that happen is what i mention on the question when connecting to charger...actually..i tried almost everything that i get from internet..but..maybe someone know something..other way..to get my phone back to life..so i asked here..just maybe there are solution...thanx anyway
If your screen turn on even for a second when you connect to the charger there must be a solution.
The bad thing should be if screen not responding at all and that would mean that motherboard is dead.
Послато са D6503 уз помоћ Тапатока
looks like you phone freezed.
Try to use hard reset button, because "Device Connected with USB Debugging off" means your phone is turned on.
Press and hold hard reset button (near SIM Slot, small red button) for a moment to 3 buzzes. Then leave this button. Try to turn on. If it won't boot, do the same procedure and your phone will be turned off. Connect your phone in flashmode, FlashTool should recognize it.
Hope it helps, got similar problem, it has fixed it
Bruce666 said:
looks like you phone freezed.
Try to use hard reset button, because "Device Connected with USB Debugging off" means your phone is turned on.
Press and hold hard reset button (near SIM Slot, small red button) for a moment to 3 buzzes. Then leave this button. Try to turn on. If it won't boot, do the same procedure and your phone will be turned off. Connect your phone in flashmode, FlashTool should recognize it.
Hope it helps, got similar problem, it has fixed it
Click to expand...
Click to collapse
didnt work buddy..doesnt get a single buzzes...yeah..because of the screen turned on for a couple when connected to charger or pc..and wnidows make a sound when coneected..it really does give me a false hope..haha
khafiful said:
didnt work buddy..doesnt get a single buzzes...yeah..because of the screen turned on for a couple when connected to charger or pc..and wnidows make a sound when coneected..it really does give me a false hope..haha
Click to expand...
Click to collapse
oooops... looks like a strange brick :crying: No idea send it to repair I don't see any other options
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
BlAckXpeRia said:
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
Click to expand...
Click to collapse
how can i remove the case to get the battery out of the phone? its not removable right?
uh. no one?
kuhaku319 said:
how can i remove the case to get the battery out of the phone? its not removable right?
Click to expand...
Click to collapse
You have to use a hairdryer. There are tutorials on YouTube.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
You have to use a hairdryer. There are tutorials on YouTube.
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
NatNikos said:
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
Click to expand...
Click to collapse
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
kuhaku319 said:
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
Click to expand...
Click to collapse
Maybe you should try it while plugged in also.
mr.loverlover said:
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
yeah i tried flashing it but the phone is totally dead, pc wont detect the phone because the phone is dead. that's the issue im facing now :silly:
NatNikos said:
Maybe you should try it while plugged in also.
Click to expand...
Click to collapse
tried, still bootlooped, when i hold power + vol up while plugged in, its powered on again and started bootlooping again
im just wondering. did u use flashtool to flash the ftf again?
Dilesh Perera said:
im just wondering. did u use flashtool to flash the ftf again?
Click to expand...
Click to collapse
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Dilesh Perera said:
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
Click to expand...
Click to collapse
mr.loverlover said:
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Click to expand...
Click to collapse
Solved
Apparently the driver is acting weird, but i uninstalled all z2 driver and reinstall them, all working and can be flashed
Thank you guys for helping me :fingers-crossed::highfive: