Hi all!
I was using Modaco 2.9 before and it was amazing stable.
Later on I tryied [email protected] worked well, but not as stable as the modaco, so I thought lets change to the 3.0. Since that I have al lot system crashes, so I thought I need to do "deldalv and/or ext_wipe" with the RA-recovery-1.2.3
Figured out that it didnt work, it says I should use "adb deldalv"
I couldnt get the adb to run on my ubuntu linux, so I tried to find an update for the RA-recovery.
And there is RA-recovery-1.5.1 and I can just install it (cause I have a previous version) via adb.
Now My Question:
How does it work?!?
Code:
[email protected]:~$ adb usb
error: insufficient permissions for device
[email protected]:~$ adb devices
List of devices attached
???????????? no permissions
[email protected]:~$ adb kill-server
[email protected]:~$ adb start-server
* daemon not running. starting it now *
* daemon started successfully *
[email protected]:~$ adb usb
error: insufficient permissions for device
[email protected]:~$ adb devices
List of devices attached
???????????? no permissions
Code:
[email protected]:~$ cat /etc/udev/rules.d/50-android.rules
#Bus 001 Device 005: ID 0bb4:0c02
SUBSYSTEM=="usb", SYSFS(idVendor)=="0bb4",MODE="0666"
How do I connect the device then, if not like that?
How can I test if everything works?
Thanks in advance
Unicate said:
How do I connect the device then, if not like that?
How can I test if everything works?
Thanks in advance
Click to expand...
Click to collapse
afaik this looks good, try starting adb as root. this is what adb devices says for me:
Code:
[email protected]:~$ adb devices
List of devices attached
HT98XXXX427 device
Code:
./adb start-server
./adb shell
works for me (with root ofcourse )
I set up my system so that the adb deamon starts at boot.
Created a script in the /etc/init.d directory called adb:
Code:
#! /bin/sh
case "$1" in
start)
/home/joeblow/AndroidSDK/tools/adb start-server
;;
stop)
/home/joeblow/AndroidSDK/tools/adb kill-server
;;
*)
echo "Usage: $0 start|stop" >&2
exit 3
;;
esac
Created a link to it in /etc/rc2.d:
Code:
lrwxrwxrwx 1 root root 13 2010-01-09 19:17 S10adb -> ../init.d/adb
Off Topic...
Am sorry to be a little off topic.. I just got my Hero and was trying to figure out all the stuff about it here on XDA.. Can anybody tell me what is ADB ??.. Whats it used for ??.. As far as I have understood, I think its some sorta software to connect hero to the computer to transfer files and stuff.. Is it right ??.. If yes.. Then what is the difference between this and HTC SYNC ??.. Thanks in advance.. Cheers !!!
if You want only transfer files, You don't need ADB.
htc sync is for synchronizing phone (contacts, calendar, etc) with PC (i guess, i don't use it ) and for upgrading SW.
Does anyone know how to connect your phone, to its own native adb. If your running 4.0 or better like the new 4.0.1 sense on evo 4g lte you have the native adb, in the terminal you can start it by typing adb start-server, but I cannot connect the phone to it.
This is nice to use to connect to other phones and use it as a debug station, but does anyone know how to connect to the phones adb server from the terminal on its own phone. When I start the server it says its listening on 5083 I have tried adb forward tcp:5555 tcp:55, tried adb tcpip 5555, but none of the forwarding ports seems to work. I have started adb on the phone and adb over wifi but still do not see the ip in adb.
Some help on this would be nice, I will keep thinking, but any help would be nice.
Some ideas might be to start a wifi server using the phones wifi tether, or hotspot to connect to itself
ip addr add 192.168.1.10/24 dev eth0
ip addr add 192.168.1.10/24 dev wlan0
maybe we can manually add and connect the devices threw wifi hotspot or tether with this. someone want to take this on and get back to me
Screen shot..
https://www.dropbox.com/sc/69v6co2l4nrd8qg/0PQqlpzI1M
I got the sdk runing natively following this..... http://fieldefect.info/w/NativeCompileAPK
he uses qemu-user-static and an i386 chroot to run the SDK, done natively on arm debian chroot.
I prefer to use multistrap over debootstrap, also I modify his run-i386 scripts to work with x86_64 chroot.
I connect adb to adbd like so,
setprop service.adb.tcp.port 5555
stop adbd
start adbd
adb connect 127.0.0.1
then try
adb shell
or
adb devices
to confirm.
My screenshot has some output from netstat which may answer your questions about ips/ports. you can see localhost
is listening on both 5038 and 5037. port 5037 belongs to adbd. adb will connect to 127.0.0.1:5037 but only gives errors.
PM me if you have questions ill gladly help.
Yea I have a chrooted ubuntu 10.04 img that I have mounted, I was going to do it that way install the sdk and use the localhost. but I was hoping to keep the chroot out of it. At least it works that way very nice. Only reason I didnt want to use a chroot is its gonna be alot of switching between terminals, was hoping for easy way to use 1 terminal. I suppose i can use 2 windows on the one terminal.
Thanks for the post.
as root
Code:
[email protected]:/ adb kill-server
[email protected]:/ adb start-server
[email protected]:/ adb connect 192.168.1.3
unable to connect to 192.168.1.3:5555
[email protected]:/ adb connect 192.168.1.3:5083
unable to connect to 192.168.1.3:5083
[email protected]:/ adb connect 127.0.0.1
unable to connect to 127.0.0.1:5555
[COLOR="Red"][email protected]:/ adb connect 127.0.0.1:5038
connected to 127.0.0.1:5038[/COLOR]
[email protected]:/ adb devices
list of attached devices
234234234234 offline
I got the adb to start and connect, but the phone still says offline. This is all native not with any chroot or anything else. any ideas?
try port 5037
email me about the other thing [email protected]
I connected using the second post like this
terminal #:
#adb kill-server
#stop adbd
#setprop service.adb.tcp.port 5555
#setprop service.adb.tcp.port 5083
#adb connect 127.0.0.1:5083
#adb devices:
127.0.0.1:5083 device
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, it will also let member do things manually instead of relying on update ZIP's all the time. Besides of explaining how to use a simple program such a quick ADB Pusher, i will also explain in depth the commands of ADB through the actual command line interface, so here we go:
First of all we will start with The command line ADB, the quick adb pusher tutorial is further down the post.
Before we start explaining some of the code what is used in ADB, it is important you know what it is, it is called the Android-Debug-Bridge.
In order to even get ADB to wokr you need to follow these procedures:
Settings -> Developers options -> USB-de bugging
Then check that box, it will make you feel like a boss.
Now once you have done that your android device, is now setup for both development and ADB. Next you are going to plug your device into your computer, via a usb cable.
Once you have done that you need to go to the directory of your ADB interface, this is where you have the android SDK installed too, on a linux or mac based system this could be:
Code:
cd /home/yourusername/android-sdk-mac/tools
Once you have the ADB interface loaded into your terminal, if you type help it will show something similar to this:
Code:
Android Debug Bridge version 1.0.25
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
Now that you have ADB running here are some simple commands on how to use it:
How identify that your device is being recognised by ADB:
Code:
adb devices
Once this has been typed it should show something like this:
Code:
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT26GW507639 device
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>
If there is a line what says "HT26GW507639" with "device" at the end your devices is successfully recognised by ADB!
How to pull data from your device:
Code:
adb -s [yourdeviceADBNUMBERHERE] pull /system /the directory you want it saved too
This command will pull all the files from your devices system directory, to the directory you told it to be saved too.
I did the pull command on a PC and I was able to get all the data from following directories on my Desire C:
/data
/system
How to push data to your device:
Code:
adb -s [yourdeviceserialnumberhere] push /system/app/whatever.apk
This command will push the files you wish to your phone, though this command.
The most basic ADB commands
ADB push, as explained before this command is used to send files to your device
Code:
adb push
ADB pull, as explained before it pulls files from your phone, and makes a copy of them.
Code:
adb pull
ADB Install and example of this code would be "adb install c:\users\app.apk"
Code:
adb install c:\users\app.apk
ADB Shell, this command begins a shell connection to the device on the other end.
Code:
adb shell
ADB reboot, it does what it says
Code:
adb reboot
ADB reboot recovery, this also does what it says
Code:
adb reboot recovery
ADB reboot bootloader, this also does what is says, like the ones above.
Code:
adb reboot bootloader
ADB remount, this remounts the devices file system for editing etc...
Code:
adb remount
ADB Shell commands:
cd, this command changes directories in your devices filesystem.
Code:
cd /system/app
is, this command listes all of the file present in the directory you are at.
Code:
is /system/app
rm, this command removes file from your device.
rm /system/app/whatever.apkcp, this command copies files, and is very similar to the cat command below.
Code:
cp /system/app/whatever.apk /sdcard/whatever.apk
cat, this command is also used to copy files to your device.
Code:
cat /system/app/whatever.apk > /sdcard/whatever.apk
exit, this command exits the ADB shell.
Code:
exit
If any of you are having any problems, read the FAQ first before posting a question in this thread, happy pushing!
If you think any other commands should me added to this section, PM me about it.
As explained above, the quick ADB pusher is an interface over the code based ADB. I will be a much easier approach for new user of android to get to grips to, that is why I am including it.
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, so here we go:
First of all you want to download the quick adb pusher program, this is in both this thread and the revolution Rom thread on XDA, the link for the program is listed below:
Quick ADB Pusher
Now you want to make sure your phone is plugged into your computer, but do not put it into USB storage mode. Make sure your USB de-bugging option is enabled it is located at:
Settings --> Developer options --> USB De-bugging
Now you will start the quick ADB pusher program, once it has started it should detect your phone. If it does not then post a comment in the thread below and we will resolve the issue.
Watch the video below to clarify a few things, such as how to copy system apps etc...
Again I hope this tutorial helps some people out, remember to read the FAQ first before posting,, to prevent the same questions being asked time and time again.
FAQ
Do you guys want a guide on how to build roms for your device?
Sent from my HTC Desire C using xda premium
russell664 said:
Do you guys want a guide on how to build roms for your device?
Sent from my HTC Desire C using xda premium
Click to expand...
Click to collapse
Yes please I think it would be very interesting.
And thanks for your time in doing this :good:
AW: [GUIDE][HOWTO] How to push files using ADB Desire V
Me too
Sent from my HTC Desire V using xda premium
I will when I have time guys, if you want more guides and stuff, surely you can smash the thanks button right in the face for me. To show your support, and that you appreciate my work.
Creating our own custom roms
Yup. It really would be a great tutorial for newbies to get started to make things, which once they could only appreciate. I am myself good at programming and algorithms, but Android development is quite alien to me. I consider myself a potential developer, if only would I get a kick start at ROM making. Also we could be able to support unknown or local market devices. I think that would be really beneficial for the entire Android community to see new budding developers with their innovations. :angel:
Hit thanks if you agree.
russell664 said:
As explained above, the quick ADB pusher is an interface over the code based ADB. I will be a much easier approach for new user of android to get to grips to, that is why I am including it.
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, so here we go:
First of all you want to download the quick adb pusher program, this is in both this thread and the revolution Rom thread on XDA, the link for the program is listed below:
Quick ADB Pusher
Now you want to make sure your phone is plugged into your computer, but do not put it into USB storage mode. Make sure your USB de-bugging option is enabled it is located at:
Settings --> Developer options --> USB De-bugging
Now you will start the quick ADB pusher program, once it has started it should detect your phone. If it does not then post a comment in the thread below and we will resolve the issue.
Watch the video below to clarify a few things, such as how to copy system apps etc...
Again I hope this tutorial helps some people out, remember to read the FAQ first before posting,, to prevent the same questions being asked time and time again.
Click to expand...
Click to collapse
It told me my devices wasn't rooted?
When trying to push a file to my internal storage on my Moto X does the file need to be located in a specific location? I am trying to root my device and need to push a file to my device. I am very new to this, and have adb working and my device showing up when i run "adb devices". I have a folder on my desktop titled "android" which contains adb, fastboot, sdk, and eclipse. Do I need to save the files I want to push to the root of this folder on my desktop? Thanks for the help!
stavebomb said:
When trying to push a file to my internal storage on my Moto X does the file need to be located in a specific location? I am trying to root my device and need to push a file to my device. I am very new to this, and have adb working and my device showing up when i run "adb devices". I have a folder on my desktop titled "android" which contains adb, fastboot, sdk, and eclipse. Do I need to save the files I want to push to the root of this folder on my desktop? Thanks for the help!
Click to expand...
Click to collapse
So push whole folder by
Code:
adb push <path on PC> <path on Moto X>
How to push this command
Please help me:
http://forum.xda-developers.com/showthread.php?t=2708466
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/laf
on my LG G2 (D802 ver 20B without root indian version)
My tablet is stuck in the recovery mode on a permanent loop. Please help
I'm just learning to code and honestly as of 6 months ago I didn't even know how to turn a computer on although I practice and take classes I'm petrified I'm going to screw up my computer. Anyway, my tablet is stuck in the recovery mode on a permanent loop so I can't put it in debug development mode. Please help me fix it. I can't afford a new one and I use it for work when I'm at a job site. I downloaded the Android Suite bundle zip (the one that said recommended) also the sdk tools zip, the quick adb pusher and the lollipop image file, lollipop rom file. I've tried every one of the commands from your site and many many other sites and it's not fixing my tablet. I know you guys don't like stupid questions but I'm feeling like a moron because I can't figure it out. Could someone please please help me fix me tablet.
russell664 said:
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, it will also let member do things manually instead of relying on update ZIP's all the time. Besides of explaining how to use a simple program such a quick ADB Pusher, i will also explain in depth the commands of ADB through the actual command line interface, so here we go:
First of all we will start with The command line ADB, the quick adb pusher tutorial is further down the post.
Before we start explaining some of the code what is used in ADB, it is important you know what it is, it is called the Android-Debug-Bridge.
In order to even get ADB to wokr you need to follow these procedures:
Settings -> Developers options -> USB-de bugging
Then check that box, it will make you feel like a boss.
Now once you have done that your android device, is now setup for both development and ADB. Next you are going to plug your device into your computer, via a usb cable.
Once you have done that you need to go to the directory of your ADB interface, this is where you have the android SDK installed too, on a linux or mac based system this could be:
Code:
cd /home/yourusername/android-sdk-mac/tools
Once you have the ADB interface loaded into your terminal, if you type help it will show something similar to this:
Code:
Android Debug Bridge version 1.0.25
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
Now that you have ADB running here are some simple commands on how to use it:
How identify that your device is being recognised by ADB:
Code:
adb devices
Once this has been typed it should show something like this:
Code:
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT26GW507639 device
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>
If there is a line what says "HT26GW507639" with "device" at the end your devices is successfully recognised by ADB!
How to pull data from your device:
Code:
adb -s [yourdeviceADBNUMBERHERE] pull /system /the directory you want it saved too
This command will pull all the files from your devices system directory, to the directory you told it to be saved too.
I did the pull command on a PC and I was able to get all the data from following directories on my Desire C:
/data
/system
How to push data to your device:
Code:
adb -s [yourdeviceserialnumberhere] push /system/app/whatever.apk
This command will push the files you wish to your phone, though this command.
The most basic ADB commands
ADB push, as explained before this command is used to send files to your device
Code:
adb push
ADB pull, as explained before it pulls files from your phone, and makes a copy of them.
Code:
adb pull
ADB Install and example of this code would be "adb install c:\users\app.apk"
Code:
adb install c:\users\app.apk
ADB Shell, this command begins a shell connection to the device on the other end.
Code:
adb shell
ADB reboot, it does what it says
Code:
adb reboot
ADB reboot recovery, this also does what it says
Code:
adb reboot recovery
ADB reboot bootloader, this also does what is says, like the ones above.
Code:
adb reboot bootloader
ADB remount, this remounts the devices file system for editing etc...
Code:
adb remount
ADB Shell commands:
cd, this command changes directories in your devices filesystem.
Code:
cd /system/app
is, this command listes all of the file present in the directory you are at.
Code:
is /system/app
rm, this command removes file from your device.
rm /system/app/whatever.apkcp, this command copies files, and is very similar to the cat command below.
Code:
cp /system/app/whatever.apk /sdcard/whatever.apk
cat, this command is also used to copy files to your device.
Code:
cat /system/app/whatever.apk > /sdcard/whatever.apk
exit, this command exits the ADB shell.
Code:
exit
If any of you are having any problems, read the FAQ first before posting a question in this thread, happy pushing!
If you think any other commands should me added to this section, PM me about it.
Click to expand...
Click to collapse
I Want to Thank Russell664. I followed your instructions and my tablet works again.
Thank you very much. You do not know how appreciative I am for your help. I hate feeling so stupid about these things. Your detailed guide was so informative and so so helpful. Debbie from Handyman-Girl
:good:
russell664 said:
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, it will also let member do things manually instead of relying on update ZIP's all the time. Besides of explaining how to use a simple program such a quick ADB Pusher, i will also explain in depth the commands of ADB through the actual command line interface, so here we go:
First of all we will start with The command line ADB, the quick adb pusher tutorial is further down the post.
Before we start explaining some of the code what is used in ADB, it is important you know what it is, it is called the Android-Debug-Bridge.
In order to even get ADB to wokr you need to follow these procedures:
Settings -> Developers options -> USB-de bugging
Then check that box, it will make you feel like a boss.
Now once you have done that your android device, is now setup for both development and ADB. Next you are going to plug your device into your computer, via a usb cable.
Once you have done that you need to go to the directory of your ADB interface, this is where you have the android SDK installed too, on a linux or mac based system this could be:
Code:
cd /home/yourusername/android-sdk-mac/tools
Once you have the ADB interface loaded into your terminal, if you type help it will show something similar to this:
Code:
Android Debug Bridge version 1.0.25
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
Now that you have ADB running here are some simple commands on how to use it:
How identify that your device is being recognised by ADB:
Code:
adb devices
Once this has been typed it should show something like this:
Code:
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT26GW507639 device
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>
If there is a line what says "HT26GW507639" with "device" at the end your devices is successfully recognised by ADB!
How to pull data from your device:
Code:
adb -s [yourdeviceADBNUMBERHERE] pull /system /the directory you want it saved too
This command will pull all the files from your devices system directory, to the directory you told it to be saved too.
I did the pull command on a PC and I was able to get all the data from following directories on my Desire C:
/data
/system
How to push data to your device:
Code:
adb -s [yourdeviceserialnumberhere] push /system/app/whatever.apk
This command will push the files you wish to your phone, though this command.
The most basic ADB commands
ADB push, as explained before this command is used to send files to your device
Code:
adb push
ADB pull, as explained before it pulls files from your phone, and makes a copy of them.
Code:
adb pull
ADB Install and example of this code would be "adb install c:\users\app.apk"
Code:
adb install c:\users\app.apk
ADB Shell, this command begins a shell connection to the device on the other end.
Code:
adb shell
ADB reboot, it does what it says
Code:
adb reboot
ADB reboot recovery, this also does what it says
Code:
adb reboot recovery
ADB reboot bootloader, this also does what is says, like the ones above.
Code:
adb reboot bootloader
ADB remount, this remounts the devices file system for editing etc...
Code:
adb remount
ADB Shell commands:
cd, this command changes directories in your devices filesystem.
Code:
cd /system/app
is, this command listes all of the file present in the directory you are at.
Code:
is /system/app
rm, this command removes file from your device.
rm /system/app/whatever.apkcp, this command copies files, and is very similar to the cat command below.
Code:
cp /system/app/whatever.apk /sdcard/whatever.apk
cat, this command is also used to copy files to your device.
Code:
cat /system/app/whatever.apk > /sdcard/whatever.apk
exit, this command exits the ADB shell.
Code:
exit
If any of you are having any problems, read the FAQ first before posting a question in this thread, happy pushing!
If you think any other commands should me added to this section, PM me about it.
Click to expand...
Click to collapse
I found I can use these ADB commands to turn on and of the WiFi of a rooted phone:
Code:
adb shell su -c 'svc wifi enable'
adb shell su -c 'svc wifi disable'
However, I'm interested in doing it without having to root the phone for an automatic testing I'm doing. Do you guys know if this is possible?
I found this project which allows me to connect to a WiFi through ADB commands not being a root user. I was wondering if anyone knows how to disconnect also from ADB and not being a root user.
UPDATE:
I've been recently trying:
Code:
C:\adb>adb shell am start -a android.intent.action.MAIN -n com.android.settings/.wifi.WifiSettings
adb server is out of date. killing...
* daemon started successfully *
Starting: Intent { act=android.intent.action.MAIN cmp=com.android.settings/.wifi.WifiSettings }
Warning: Activity not started, its current task has been brought to the front
and
Code:
C:\adb>adb -s serial_number shell am start -a android.intent.action.MAIN -n com.android.settings/.wifi.WifiSettings
Starting: Intent { act=android.intent.action.MAIN cmp=com.android.settings/.wifi.WifiSettings }
Warning: Activity not started, its current task has been brought to the front
I also found doing this type of command:
Code:
adb shell input keyevent 20 & adb shell input keyevent 23
I can navigate and click. The problem seems to be that I always finish in a different state so the next time I input the command
Code:
adb -s serial_number shell am start -a android.intent.action.MAIN -n com.android.settings/.wifi.WifiSettings
I start in a different place and start clicking elsewhere. I've tried returning home, but that doesn't fix the issue. Is there any way to start always from the same point inside the WiFi settings?
Thanks!
natiya said:
I found I can use these ADB commands to turn on and of the WiFi of a rooted phone:
Code:
adb shell su -c 'svc wifi enable'
adb shell su -c 'svc wifi disable'
However, I'm interested in doing it without having to root the phone for an automatic testing I'm doing. Do you guys know if this is possible?
Click to expand...
Click to collapse
Turn WiFi off
Code:
adb shell settings put global airplane_mode_on 1
adb shell settings put global wifi_on 0
adb shell settings put global wifi_scan_always_enabled 0
Afterwards you've to re-boot the device.
Turn WiFi on
Code:
adb shell settings put global airplane_mode 0
adb shell settings put global wifi_on 1
adb shell settings put global wifi_scan_always_enabled 1
jwoegerbauer said:
Turn WiFi off
Code:
adb shell settings put global airplane_mode_on 1
adb shell settings put global wifi_on 0
adb shell settings put global wifi_scan_always_enabled 0
Afterwards you've to re-boot the device.
Turn WiFi on
Code:
adb shell settings put global airplane_mode 0
adb shell settings put global wifi_on 1
adb shell settings put global wifi_scan_always_enabled 1
Click to expand...
Click to collapse
Thank you, but those don't produce any change on my device. Actually, if I put the first two commands without doing "adb kill-server" in between, I get this message:
error: more than one device/emulator
Click to expand...
Click to collapse
But the output when they work is:
adb server is out of date. killing...
* daemon started successfully *
Click to expand...
Click to collapse
and nothing happens.
I've been recently trying:
Code:
C:\adb>adb shell am start -a android.intent.action.MAIN -n com.android.settings/.wifi.WifiSettings
adb server is out of date. killing...
* daemon started successfully *
Starting: Intent { act=android.intent.action.MAIN cmp=com.android.settings/.wifi.WifiSettings }
Warning: Activity not started, its current task has been brought to the front
and
Code:
C:\adb>adb -s serial_number shell am start -a android.intent.action.MAIN -n com.android.settings/.wifi.WifiSettings
Starting: Intent { act=android.intent.action.MAIN cmp=com.android.settings/.wifi.WifiSettings }
Warning: Activity not started, its current task has been brought to the front
This opens the screen where you can turn on and off the WiFi but it doesn't do it...not sure if I'm missing something!
Just to be shure, make shure your using the latest version of ADB offered by google here:
https://developer.android.com/studio/releases/platform-tools
You could use adb wifi
After activating when using usb it and connecting through the same wifi:
svc wifi enable
works without root
I'm a little late to this thread, but if it still helps the OP, non-rooted Android 10 and below allowed wireless adb connections AFTER a USB connection was first established (adb start-server && adb tcpip 5555 && adb connect [IP]:5555), but that changed (for the better) in Android 11 and above with the new new Developer options Wireless debugging random port assignments (adb connect [IP]:[PORT] or adb pair [IP]:[PORT] [PIN]) such that the adb wireless connection never needs USB cable ever again.
Given Android 11 allows Developer options Wireless debugging via a random port, and Android 12 new Developer options Wireless debugging allows that to be accessed even easier with a new Developer options Wireless debugging tile, the only thing missing is a way to turn the non-rooted Android Wi-Fi on or off via adb (which was the OP's original question after all).
Maybe this will work if we can figure out how to tap the buttons?
adb shell "am start -a android.settings.WIFI_SETTINGS"
Click to expand...
Click to collapse
For swiping on the phone from adb this works...
C:\> adb shell input swipe 500 1000 500 100
This will instantly swipe from center to the top of the screen.
You can add a time period, e.g., take 3 seconds to swipe that.
C:\> adb shell input swipe 500 1000 500 100 3000
Click to expand...
Click to collapse
But you want to tap the buttons, right?
If we can figure out the positions, maybe this would work?
C:\> adb shell am start -n com.google.android.gms/.ads.settings.AdsSettingsActivity
That should pop up an Android "Reset Advertising ID" settings page.
C:\> adb shell input tap 500 400
If run after the command above, that will tap the button to
asking to "Opt out of Ads Personalization" in that Activity
if that button is like mine, at the X=500 & Y=400 location.
On my phone, this is the "Reset advertising ID" button location:
adb shell input tap 500 200
On my phone, this is the "OK" button on that GUI above.
adb shell input tap 700 1000
C:\> adb shell am force-stop com.google.android.gms
If run after bringing up the advertising-id reset Activity,
it will close the activity without doing anything else.
Click to expand...
Click to collapse
Here is a somewhat related post...
[adb,scrcpy,vysor] What ports does Android 12 randomly set when Wi-Fi connecting via Wireless debugging adb "pair" or "connect" commands?
Type adb tcpip 5555 in the command line or Terminal and press Enter.
Find your phone's IP address in Settings > About Phone > Status > IP Address.
Back in the command line or Terminal, type adb connect [your Android's IP address].
Finally, press Enter again.
Regards,
J Wick