So I tried install Bliss ROM to my Moto E 1st gen. After installation its stuck at the screen where it says "Warning Bootloader Unlocked".
The phone is not detected by laptop. In Linux there are no extra messages in dmesg logs and in Windows, Device Manager shows no additional USB device. If I press power button the phone will restart and stay in the initial screen and will continue so until its battery is drained out.
I tried adb, fastboot, mfastboot and qboot but they are unable to detect phone.
What can I do to make my device functional again?
ravi.xolve said:
So I tried install Bliss ROM to my Moto E 1st gen. After installation its stuck at the screen where it says "Warning Bootloader Unlocked".
The phone is not detected by laptop. In Linux there are no extra messages in dmesg logs and in Windows, Device Manager shows no additional USB device. If I press power button the phone will restart and stay in the initial screen and will continue so until its battery is drained out.
I tried adb, fastboot, mfastboot and qboot but they are unable to detect phone.
What can I do to make my device functional again?
Click to expand...
Click to collapse
Try any different ROM (clean flash ),
It might be a ROM issue!
Sent from my Moto E using XDA-Developers mobile app
My problem to begin with is that I cannot get to a point where it is detected as by any tool on PC. So how can I flash it?
ravi.xolve said:
My problem to begin with is that I cannot get to a point where it is detected as by any tool on PC. So how can I flash it?
Click to expand...
Click to collapse
Do you have twrp? If yes, then flash using twrp. It doesn't need pc
AFAIK, it shouldn't be a rom issue. Anyways you can try to flash another rom
Afaik no issues in last build of bliss
Sent from my Moto E using Tapatalk
Solved
Solved by pressing volume down and power for very long time, booted into TWRP and flashed with factory ROM
Related
My Moto G XT1032 won't boot, it gets into the boot animation then goes to a black screen and does nothing, I can get into the fastboot and recovery menus however when I try to do anything through adb and fastboot it's saying either waiting for device or device not found. I wanted to return back to stock 4.4.4 so I could get the lollipop update, bootloader is unlocked. When I connect my phone to the PC is makes the sound that it's connected but it won't show the internal storage, the drivers are there since I checked in device manager.
Is my phone bricked?
Any helped will be gladly appreciated!
Thanks!
iscopesiz said:
My Moto G XT1032 won't boot, it gets into the boot animation then goes to a black screen and does nothing, I can get into the fastboot and recovery menus however when I try to do anything through adb and fastboot it's saying either waiting for device or device not found. I wanted to return back to stock 4.4.4 so I could get the lollipop update, bootloader is unlocked. When I connect my phone to the PC is makes the sound that it's connected but it won't show the internal storage, the drivers are there since I checked in device manager.
Is my phone bricked?
Any helped will be gladly appreciated!
Thanks!
Click to expand...
Click to collapse
Your phone is soft-bricked, but since it boots to all those modes, should be easy enough to get going. Not sure why you would expect the internal storage to show up if the device isn't booting...? Do you have a custom recovery installed? You didn't mention what you did before it stopped booting correctly either, which could be helpful info for troubleshooting. Are you sure the correct drivers are being loaded? Are you using adb and fastboot when the phone is in the correct mode to receive the commands? Fastboot doesn't work in recovery, adb doesn't work in bootloader mode, etc. Worst case scenario, just restore with RSD Lite. If you are still having issues connecting to it, then uninstall all Moto drivers, reboot the PC, then reinstall them most recent Motorola Device Manager and try again.
i have updated my phone moto e to android L OTA manually and since then it worked really well but only few bugs were there .
later again i saw a 13mb file of bugs fix manually update which i have downloaded and installed in my phone which got bricked and this occurred :
My phone shows only one Motorola M logo image and while connecting to charger it shows only this image
Help me out to work my mobile as before it use to be !!
can any one help regarding this problem.
Srinivas0009 said:
i have updated my phone moto e to android L OTA manually and since then it worked really well but only few bugs were there .
later again i saw a 13mb file of bugs fix manually update which i have downloaded and installed in my phone which got bricked and this occurred :
My phone shows only one Motorola M logo image and while connecting to charger it shows only this image
Help me out to work my mobile as before it use to be !!
can any one help regarding this problem.
Click to expand...
Click to collapse
its because u have charger connected..take it out and boot up..
-Adarsh- said:
its because u have charger connected..take it out and boot up..
Click to expand...
Click to collapse
sorry but i couldnt start my phone !!! it shows me motorola M logo and doesnt go forward from it
Srinivas0009 said:
sorry but i couldnt start my phone !!! it shows me motorola M logo and doesnt go forward from it
Click to expand...
Click to collapse
Hard reset
Sent from my XT1022 using XDA Premium mobile app
Soft Brick
That's only a soft brick, the good thing is it turns on, if it was a hard brick you would have to do a blankflash of the bootloader, which as the device has only just been released it won't be available. Just a few things, because this is only a soft brick you may be able to sort it out. Be careful, when you're doing an OTA update be sure to have the stock recovery because if you have a custom recovery such as TWRP or CWM it won't install the update that's why when you have an OTA update it's best to flash the stock recovery so that it will be able to install Motorola's OTA update. If you haven't got the stock recovery img flashed on your device then you will need to. Download the stock recovery img, you can do it on one of the Moto Tool's that's floating around. Then enter your bootloader, fastboot mode by powering off the device and holding POWER + Volume down buttons together but don't let go until you see your bootloader. Make sure you have ADB and Fastboot drivers installed on your PC, download the recovery img for your device (stock one) save it to your desktop and then do the following. Locate your ADB and Fastboot driver folder and then open a command prompt window in your folder and type to following, without the apostrophes, 'fastboot devices' and if you see your device you're connected ready to flash. After that, type 'fastboot flash recovery recovery.img' and it will flash the stock recovery partition for your device. When you have done that you can boot into recovery, scroll with your volume buttons until you see 'recovery' click on it and you will see 'Wipe Factory' click that and it will revert your phone back to stock! Hopefully then your problem should be fixed, if not then you will need to wait for the Factory Images, or I think you are able to download them off Motorola's website, if not then you'll have to wait! Just remember in future to always make a backup of your current firmware, then if something like this does go wrong you always have something to fall back on if your device does get bricked!
Hope this helped you
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
i have same problem.
can someone solved it?
SaRLaY said:
Hello
I think I've bricked my P760. When i want to run my phone it stuck on LG logo and can't boot to OS. Everything was fine but after installing fix to camera i could boot to OS my phone once and after reboot i can't boot to OS anymore. My phone has root, unlocked bootloader, custom recovery and custom ROM. I don't have acces to recovery. I have only acces to bootloader mode with fastboot (VOL+ + HOME + POWER). Then i have a note "Welcome to LG Fastboot Mode ". My computer detects it and automatically installs drivers (Fastboot interface (Google USB ID). But the problem is that in Device Manager it all time blinks. It's connected and immediately dissconects. I'm using original USB cable from LG charger. When i'm trying to use cmd in fastboot & adb files it's waiting for device all the time.
I don't know what I should do next :C
Pls help guys
Click to expand...
Click to collapse
mirul_up said:
i have same problem.
can someone solved it?
Click to expand...
Click to collapse
pseudosane said:
I can help you. i just figured it out after walking away for a few weeks. pm me and ill tell you over google+ or skype and walk you through it.
Click to expand...
Click to collapse
Go through this thread http://forum.xda-developers.com/showthread.php?t=2292828 it will definitely solve your problem, from the screen-shot it seems that you are using windows 10, i'm not sure that omap4430 drivers will work on windows 10 or not, but you'll try otherwise do the process on windows 7, your phone will revive...
@Codeplex its to complicated thread.
before mine become like this my phone alway succes writing recovery via adb fastboot but now i try writing recovery via adb fastboot always filed.
flashing firmware with cmahendra method always get 15% error..
I think all dev not care anymore about our phone..,
Hi, I first did factory reset then hard reset moto e gen 1 running on android 5.1.
After booting and selecting language, phone asked for wifi connection (skip button is grayed) when I connect to any available working wifi network it stucks at (checking connection screen) and stays there only.
Please tell me how to sort this out.
Did you tried hard resetting again?
Yep! No use
rizzee said:
Yep! No use
Click to expand...
Click to collapse
Stock android 5.1 received through ota?
Man many random issues keep popping up in that.
You can always try any custom rom or if you want stock one check this out :
http://forum.xda-developers.com/showthread.php?t=2755857
-z3r0- said:
Stock android 5.1 received through ota?
Man many random issues keep popping up in that.
You can always try any custom rom or if you want stock one check this out :
http://forum.xda-developers.com/showthread.php?t=2755857
Click to expand...
Click to collapse
Was trying to install stock rom, but when I enter the command it stucks. I think phone is not getting connected. It shows conneting phone and stays like this. Motorola Driver is installed.
rizzee said:
Was trying to install stock rom, but when I enter the command it stucks. I think phone is not getting connected. It shows conneting phone and stays like this. Motorola Driver is installed.
Click to expand...
Click to collapse
In which step it's actually getting stuck?
you can check if it's your device is connected or not by this command in fastboot mode -
Code:
fastboot devices
or (if you have mfastboot)
Code:
mfastboot devices
-z3r0- said:
In which step it's actually getting stuck?
you can check if it's your device is connected or not by this command in fastboot mode -
Code:
fastboot devices
or (if you have mfastboot)
Code:
mfastboot devices
Click to expand...
Click to collapse
Hi when I enter any of these command, it says <waiting for the device>
this is the same message I get with every command.
rizzee said:
Hi when I enter any of these command, it says <waiting for the device>
this is the same message I get with every command.
Click to expand...
Click to collapse
Your device isn't detected by your pc maybe because of inappropriate drivers.
If drivers are properly installed maybe you have issues with your usb cable.
Also check on phone if it says USB Conncted in fastboot mode, after connecting the usb.
-z3r0- said:
Your device isn't detected by your pc maybe because of inappropriate drivers.
If drivers are properly installed maybe you have issues with your usb cable.
Also check on phone if it says USB Conncted in fastboot mode, after connecting the usb.
Click to expand...
Click to collapse
Yes, on phone its showing "USB Connected".
I only installed Motorola Driver kit. Do I need any other driver?
Uninstall it and then install motorola device manager. Try afterwards.
-z3r0- said:
Stock android 5.1 received through ota?
Man many random issues keep popping up in that.
You can always try any custom rom or if you want stock one check this out :
http://forum.xda-developers.com/showthread.php?t=2755857
Click to expand...
Click to collapse
i checked and did all the steps as told in the link. But after fastboot reboot the the fone displays the fastboot mode with message "failed to validate system image" and the fone does not boot up.
My device is MOTO E, XT1022. i tried with android lollipop from the stock roms.
joelfinz said:
i checked and did all the steps as told in the link. But after fastboot reboot the the fone displays the fastboot mode with message "failed to validate system image" and the fone does not boot up.
My device is MOTO E, XT1022. i tried with android lollipop from the stock roms.
Click to expand...
Click to collapse
You may check out this one :
http://forum.xda-developers.com/showpost.php?p=48802176&postcount=29
rizzee said:
Hi, I first did factory reset then hard reset moto e gen 1 running on android 5.1.
After booting and selecting language, phone asked for wifi connection (skip button is grayed) when I connect to any available working wifi network it stucks at (checking connection screen) and stays there only.
Please tell me how to sort this out.
Click to expand...
Click to collapse
I too had this exact same problem of the phone getting stuck at that screen forever. As far as I remember, I fixed it by wiping system partition. I faced this problem several times and tried hard resetting and all but wiping system partition always fixed the issue. Ofcourse you have to flash stock via fastboot following this.
Still very new to the community, so please bear with me if I miss something or make any mistakes.
Trying to flash havocOS
I flashed an unofficial version of twrp (for X657, made sure to disable verity on both vbmeta and vbmeta_system), then attempted to boot into twrp, with no luck (it just ended up booting into fastboot for some reason).
I then tried to boot into fastbootd, completely forgetting i had twrp still installed, to flash havoc from there (this is where i think i messed up, i remember reading somewhere that twrp prevents this)
Now my phone is stuck looping on the infinix logo
Tried the SP Flash Tool, but kept getting this error. Which I'm guessing is because the phone keeps restarting (mainly because "Disconnected!" shows up in the console between two instances of the same error).
Any advice?
UnequalB said:
Still very new to the community, so please bear with me if I miss something or make any mistakes.
Trying to flash havocOS
I flashed an unofficial version of twrp (for X657, made sure to disable verity on both vbmeta and vbmeta_system), then attempted to boot into twrp, with no luck (it just ended up booting into fastboot for some reason).
Click to expand...
Click to collapse
Probably you haven´t to flash vbmeta to boot to TWRP but just when you are ready to boot to system.
UnequalB said:
I then tried to boot into fastbootd, completely forgetting i had twrp still installed, to flash havoc from there (this is where i think i messed up, i remember reading somewhere that twrp prevents this)
Click to expand...
Click to collapse
You can flash the TWRP image through fastboot and then boot to it through commands.
UnequalB said:
Now my phone is stuck looping on the infinix logo
Tried the SP Flash Tool, but kept getting this error. Which I'm guessing is because the phone keeps restarting (mainly because "Disconnected!" shows up in the console between two instances of the same error).
Any advice?
Click to expand...
Click to collapse
This is the list of errors from SP Flash tool https://forum.hovatek.com/thread-439.html
Anyway, you have a tool specific for your device https://forum.hovatek.com/thread-9224.html
I guess this thread must be moved to Android General Questions.
SubwayChamp said:
Probably you haven´t to flash vbmeta to boot to TWRP but just when you are ready to boot to system.
You can flash the TWRP image through fastboot and then boot to it through commands.
Click to expand...
Click to collapse
I meant twrp prevents booting to fastbootd, it was after trying to boot into fastbootd using "fastboot reboot fastboot" that the bootloop started, right now I can't seem to get past the boot logo.
SubwayChamp said:
This is the list of errors from SP Flash tool https://forum.hovatek.com/thread-439.html
Click to expand...
Click to collapse
Weirdly enough the error i got was not listed here..
SubwayChamp said:
Anyway, you have a tool specific for your device https://forum.hovatek.com/thread-9224.html
I guess this thread must be moved to Android General Questions.
Click to expand...
Click to collapse
This method doesn't work either since the phone won't stay off for more than 7 seconds.
I'm not stuck in a bootloop as in the phone powers on, then gets stuck, or powers off again
The phone continuously powers on and off and nothing I do (apart from disconnecting the battery) stops it, even then, once the battery is back in it begins looping again...
UnequalB said:
I meant twrp prevents booting to fastbootd, it was after trying to boot into fastbootd using "fastboot reboot fastboot" that the bootloop started, right now I can't seem to get past the boot logo.
Click to expand...
Click to collapse
You don't need to reboot to fastbootd, and you can't apply ADB commands either, because your device doesn't allow it due to random reboots and due to USB debugging is disabled right now.
UnequalB said:
Weirdly enough the error i got was not listed here..
This method doesn't work either since the phone won't stay off for more than 7 seconds.
Click to expand...
Click to collapse
Not true, this is the whole idea of this kind of tools either through SP Flash tool or Infinix tool you just have to GET device can be detected, this tiny portion of time will be enough for the tools can start its job, once the tool started the device get attached without a way to get out of it. To achieve this, prepare ALL that you need for tool to work even press flash/download, connect device with PC and apply the right combination key,
Prepare device manager on Windows and check which status of connection it is passing through to better understand which mode is lacking of.
UnequalB said:
I'm not stuck in a bootloop as in the phone powers on, then gets stuck, or powers off again
The phone continuously powers on and off and nothing I do (apart from disconnecting the battery) stops it, even then, once the battery is back in it begins looping again...
Click to expand...
Click to collapse
You are not saying till now which model your device is, assuming that the bootloader is unlocked.
SubwayChamp said:
You don't need to reboot to fastbootd, and you can't apply ADB commands either, because your device doesn't allow it due to random reboots and due to USB debugging is disabled right now.
Not true, this is the whole idea of this kind of tools either through SP Flash tool or Infinix tool you just have to GET device can be detected, this tiny portion of time will be enough for the tools can start its job, once the tool started the device get attached without a way to get out of it. To achieve this, prepare ALL that you need for tool to work even press flash/download, connect device with PC and apply the right combination key,
Prepare device manager on Windows and check which status of connection it is passing through to better understand which mode is lacking of.
You are not saying till now which model your device is, assuming that the bootloader is unlocked.
Click to expand...
Click to collapse
I tried again and that error seems to just be an issue with the linux version, it detected the phone fine and started writing to "super" on windows, but my laptop died, and now the phone isn't showing up on SP Flash, neither would it turn on at all.. but the charging indicator light comes on when I plug it in.
UnequalB said:
I tried again and that error seems to just be an issue with the linux version, it detected the phone fine and started writing to "super" on windows, but my laptop died, and now the phone isn't showing up on SP Flash, neither would it turn on at all.. but the charging indicator light comes on when I plug it in.
Click to expand...
Click to collapse
Well, if you interrupted the process, that's not good at all. The only you can do is keeping trying it, if your motherboard was not damaged.
hi guys i am DELTIERO from the Philippines did you allready solve the problem?
If not yet done message me on my facebook page https://www.facebook.com/del.villalobos.1/
and i will help you im here veltech san carlos negross occidental phil
Help please! I flashed a gapps zip file using flashify on my infinix smart 5 x657 (Running on lineageos gsi android 12) then the phone just went off. and it not turning on. but it shows the charging indicator light when i connect it to power.
I've tried disconnecting the battery still nothing
what possible solution is there for this?