Hi. Has anyone managed to root Ulefone Armor X5?
The phone is based on MediaTek Helio P23 MT6763, 64-bit Processor.
Baseband: MOLY.LR12A.R2.MP.V91.7.P4
Kernel: 4.4.146#2 wed Sep 25 16:10:16 CST 2019
Build Nr: Armor_X5_MH1_EEA_V01
I have installed the drivers uploaded onto Mega by the Ulefone company here:
https://mega.nz/#F!t64QzRxA!SxZFFl3WrgujTaFshrFuKA!03YnGSYa
I have created the patched boot.img by Magisk Manager 7.5.0.
Enabled the OEM Unlock and USB Debugging thru the Developer options.
Thru ADB, successfully reboots to fastboot by "adb reboot bootloader". The PC recognizes it as typing "adb devices" gives the serial number.
And so far that's all.
Typing "fastboot oem unlock" or "fastboot flashing unlock" gives no result on the phone screen. The ADB says: waiting for device.
I am following most of the steps explained here:
https://forum.xda-developers.com/android/general/root-ulefone-armor-6-tutorial-t3948089
Any advice on what I am doing wrong?
Is it possible to brick it or bootloop by flashing the patched boot.img directly?
Many thanks.
zhekozhekov said:
Hi. Has anyone managed to root Ulefone Armor X5?
The phone is based on MediaTek Helio P23 MT6763, 64-bit Processor.
Baseband: MOLY.LR12A.R2.MP.V91.7.P4
Kernel: 4.4.146#2 wed Sep 25 16:10:16 CST 2019
Build Nr: Armor_X5_MH1_EEA_V01
I have installed the drivers uploaded onto Mega by the Ulefone company here:
https://mega.nz/#F!t64QzRxA!SxZFFl3WrgujTaFshrFuKA!03YnGSYa
I have created the patched boot.img by Magisk Manager 7.5.0.
Enabled the OEM Unlock and USB Debugging thru the Developer options.
Thru ADB, successfully reboots to fastboot by "adb reboot bootloader". The PC recognizes it as typing "adb devices" gives the serial number.
And so far that's all.
Typing "fastboot oem unlock" or "fastboot flashing unlock" gives no result on the phone screen. The ADB says: waiting for device.
I am following most of the steps explained here:
https://forum.xda-developers.com/android/general/root-ulefone-armor-6-tutorial-t3948089
Any advice on what I am doing wrong?
Is it possible to brick it or bootloop by flashing the patched boot.img directly?
Many thanks.
Click to expand...
Click to collapse
If your PC Is not seeing device in fastboot. It may be you need to update your fastboot.exe
In my case there was two possibilities. In Windows 10 I gave myself higher
admin rights clicking right in the folder of my fastboot programm. I tried a little bit, but there is no big thing to get a positive answer writing (before of course I switch on under developer settings usb debugging and gave answer in phone screen) :
fastboot devices
Better and easier is it on Linux, because writing sudo in front of fastboot and ready is it:
sudo fastboot devices
sudo fastboot flashing unlock
or
sudo fastboot flashing unlock_critical
:good:
Hi,
Recently rooted mine Armor X5 (with some pains) so remember mistakes I did and you might be doing.
First, confirm that fastboot sees your device ("fastboot devices") . If you get "waiting for device" then
try different ADB & fastboot installers (e.g. 15 seconds ADB Installer 1.4.3 or ADB installer v1.3
Good luck
waldem88 said:
Hi,
Recently rooted mine Armor X5 (with some pains) so remember mistakes I did and you might be doing.
First, confirm that fastboot sees your device ("fastboot devices") . If you get "waiting for device" then
try different ADB & fastboot installers (e.g. 15 seconds ADB Installer 1.4.3 or ADB installer v1.3
Good luck
Click to expand...
Click to collapse
Thanks for the advice. I am still waiting for someone to give detailed instructions of rooting it.
Did you flash and use TWRP or flashed the patched boot.img straight? Cheers.
waldem88 said:
Hi,
Recently rooted mine Armor X5 (with some pains) so remember mistakes I did and you might be doing.
First, confirm that fastboot sees your device ("fastboot devices") . If you get "waiting for device" then
try different ADB & fastboot installers (e.g. 15 seconds ADB Installer 1.4.3 or ADB installer v1.3
Good luck
Click to expand...
Click to collapse
just got my phone bro. would you be kind in sharing the method you used to root your armor x5.. thanks.
I have the some problem.
In other device, fastboot are work alright.
I try to edit (repack) Zip Rom with replace boot_verified.img with img from magisk, and instal with SP multi port from official site, its error' on boot.img....
Any idea to verify signature boot_verified.img from magisk.???
Sorry for my bad English..
A Solution
Hi, popping in to say I had the same exact problem. After you enter fastboot through the command "adb reboot bootloader", go into device manager and look for Armor X5, right-click update drivers, and then select search for drivers online. It should automatically update with the adb driver.
( I also found the code at the end of the romprovider tutorial titled "How to create a prerooted patched boot.img with magisk" useful, although fair warning it did wipe my device clean )
My input
I'll say this: There is 2, yes, two fastboot 'modes' in this fone, and is provable thus: adb reboot bootloader - shows a black screen with the tiniest of writing, and...
adb reboot recovery - boots us into (origional) recovery, where we can choose to boot into fastboot, however, when booting into this mode, at the top of the screen we see fastbootd - note the 'd' at the end? fastboot commands work, but dont stick, appear to write succesfully.
So when people say they cant use fastboot commands, this is why!
I got as far as:
adb reboot fastboot
fastboot -i 0x0E8D devices
fastboot -i 0x0E8D flashing unlock <-success - bootloader unlocked, and can be relocked.
fastboot -i 0x0E8D flash boot boot.img <- magisk_patched.img (did not show anything to say it worked)
fastboot -i 0x0E8D flash recovery twrp.img <- twrp (tried all available twrp versions, none worked so far, reckon we need a twrp built for this particular fone)
After reflashing the boot, fone bootlooped.
After flashing recovery, fone bootlooped.
So hopefully someone will chip in, because it's not normal that we can apparently flash anything with bootloader unlocked, but now we cant.. I'll point out my fone is an android 10, probably the reason no other twrp's will work, most likely being made on android 9
I have 30 years programming experience, just getting old and cranky...
Seems my thread starter was moved to god knows where, (bang go donations until I see something worth donating to lol), I AM a developer, who buys toys just to hack them!! So may threads in dev section have ZERO useable information, 'scuse the coment :/
Hi, on my side I am stuck in the same way because I found several versions:
- mt6762
- mt6763
i feel all twrp and magisk are for 6763.
Can you confirm which version you have?
Sorry but I'm stuck months too and I really need to root my phone ;-(
Pachacouti said:
I'll say this: There is 2, yes, two fastboot 'modes' in this fone, and is provable thus: adb reboot bootloader - shows a black screen with the tiniest of writing, and...
adb reboot recovery - boots us into (origional) recovery, where we can choose to boot into fastboot, however, when booting into this mode, at the top of the screen we see fastbootd - note the 'd' at the end? fastboot commands work, but dont stick, appear to write succesfully.
So when people say they cant use fastboot commands, this is why!
I got as far as:
adb reboot fastboot
fastboot -i 0x0E8D devices
fastboot -i 0x0E8D flashing unlock <-success - bootloader unlocked, and can be relocked.
fastboot -i 0x0E8D flash boot boot.img <- magisk_patched.img (did not show anything to say it worked)
fastboot -i 0x0E8D flash recovery twrp.img <- twrp (tried all available twrp versions, none worked so far, reckon we need a twrp built for this particular fone)
After reflashing the boot, fone bootlooped.
After flashing recovery, fone bootlooped.
So hopefully someone will chip in, because it's not normal that we can apparently flash anything with bootloader unlocked, but now we cant.. I'll point out my fone is an android 10, probably the reason no other twrp's will work, most likely being made on android 9
I have 30 years programming experience, just getting old and cranky...
Seems my thread starter was moved to god knows where, (bang go donations until I see something worth donating to lol), I AM a developer, who buys toys just to hack them!! So may threads in dev section have ZERO useable information, 'scuse the coment :/
Click to expand...
Click to collapse
error for me too
you are win?
Using win 7 x64,
Phone is on Android 10_Q
Mtk 6765
This is an aarm64, meaning a 64-bit fone, no instructions available so far work, because they are all for android 9, lot's of 'Q' root's, but not for what they call 'A' only boot, which is not the same as A/B partitioning.
All I'm reading now is the same tut's on hundreds of websites giving the same old information... and the fact root is gone. From what I read, My fone is so up to date that I'm where most will be shortly, and with root devs too busy keeping old hat alive... Figure it out: TWRP is actually dead, now. This is why they no longer accept requests here. Twrp cannot be loaded in a dynamic partition setup, (so far) it wont even fastboot boot twrp.img, not happening with ANY twrp. So forget TWRP. Twrp is old hat to my fone.
Magisk, haha, not one version works for true 64bit, (Not implemented yet), and prob never will be, say tata magisk and say tata su, cause we cant write to the deduped ext4 system, root is kinda pointless now, cause if we cant read/write... Overlayfs is the fix I read, in about 5 years...
So its writing custom kernels for the A only tat's the way I read...
Wake up, it's time to experience the cave in to google domination... their AI patc things much quicker than waiting on devs working on what used to work...
Fingers crossed they get round to the new updates instead of concentrating on what works for ONE fone...
Pachacouti said:
Using win 7 x64,
Phone is on Android 10_Q
Mtk 6765
This is an aarm64, meaning a 64-bit fone, no instructions available so far work, because they are all for android 9, lot's of 'Q' root's, but not for what they call 'A' only boot, which is not the same as A/B partitioning.
All I'm reading now is the same tut's on hundreds of websites giving the same old information... and the fact root is gone. From what I read, My fone is so up to date that I'm where most will be shortly, and with root devs too busy keeping old hat alive... Figure it out: TWRP is actually dead, now. This is why they no longer accept requests here. Twrp cannot be loaded in a dynamic partition setup, (so far) it wont even fastboot boot twrp.img, not happening with ANY twrp. So forget TWRP. Twrp is old hat to my fone.
Magisk, haha, not one version works for true 64bit, (Not implemented yet), and prob never will be, say tata magisk and say tata su, cause we cant write to the deduped ext4 system, root is kinda pointless now, cause if we cant read/write... Overlayfs is the fix I read, in about 5 years...
So its writing custom kernels for the A only tat's the way I read...
Wake up, it's time to experience the cave in to google domination... their AI patc things much quicker than waiting on devs working on what used to work...
Fingers crossed they get round to the new updates instead of concentrating on what works for ONE fone...
Click to expand...
Click to collapse
Hello, I have the same phone, any news about rooting etc.. ?
Hi,
I got my Armor X5 P22 Mediatek MT6762, Android 10 phone a couple of days ago to replace an ageing Moto G5S. I have unlocked the bootloader on several previous Android phones, but found doing so on this X5 a bit harder.
Assuming you have enabled 'Developer Options' etc on the phone and installed the Mediatek drivers and 'Minimal ADB and Fastboot' on your PC/laptop, I would suggest that once you are in Fastboot mode and have confirmed that Fastboot recognises your device with the command "Fastboot devices", that you next enter the command
Fastboot /?
This will bring up all the Fastboot commands and options installed on your phone. I then used
Fastboot flashing get_unlock_ability which returned an 8 digit number:-
D:\Minimal ADB and Fastboot>fastboot flashing get_unlock_ability
...
(bootloader) unlock_ability = 16777216
OKAY [ 0.015s]
finished. total time: 0.015s
I have no idea what the 8 digit number means, as I thought it would return '1' or '0' .
However I then did the following:
D:\Minimal ADB and Fastboot>fastboot flashing unlock
...
FAILED (remote: GetVar Variable Not found)
finished. total time: 6.704s
D:\Minimal ADB and Fastboot>fastboot reboot
(bootloader) Start unlock flow
rebooting...
On rebooting the phone, a warning appeared on the Home Screen for 5 seconds stating that the bootloader was unlocked, the phone could not be trusted and my warranty was void. The phone was factory reset.
On re-enabling 'Developer Options' and checking the 'OEM unlocking' option the phone confirms that 'Bootloader is already unlocked'
Don't know whether this helps anyone else struggling to unlock their phone.
The 'fastboot flashing unlock' command might be unnecesary.
regards
bjlabuk said:
Hi,
I got my Armor X5 P22 Mediatek MT6762, Android 10 phone a couple of days ago to replace an ageing Moto G5S. I have unlocked the bootloader on several previous Android phones, but found doing so on this X5 a bit harder.
Assuming you have enabled 'Developer Options' etc on the phone and installed the Mediatek drivers and 'Minimal ADB and Fastboot' on your PC/laptop, I would suggest that once you are in Fastboot mode and have confirmed that Fastboot recognises your device with the command "Fastboot devices", that you next enter the command
Fastboot /?
This will bring up all the Fastboot commands and options installed on your phone. I then used
Fastboot flashing get_unlock_ability which returned an 8 digit number:-
D:\Minimal ADB and Fastboot>fastboot flashing get_unlock_ability
...
(bootloader) unlock_ability = 16777216
OKAY [ 0.015s]
finished. total time: 0.015s
I have no idea what the 8 digit number means, as I thought it would return '1' or '0' .
However I then did the following:
D:\Minimal ADB and Fastboot>fastboot flashing unlock
...
FAILED (remote: GetVar Variable Not found)
finished. total time: 6.704s
D:\Minimal ADB and Fastboot>fastboot reboot
(bootloader) Start unlock flow
rebooting...
On rebooting the phone, a warning appeared on the Home Screen for 5 seconds stating that the bootloader was unlocked, the phone could not be trusted and my warranty was void. The phone was factory reset.
On re-enabling 'Developer Options' and checking the 'OEM unlocking' option the phone confirms that 'Bootloader is already unlocked'
Don't know whether this helps anyone else struggling to unlock their phone.
The 'fastboot flashing unlock' command might be unnecesary.
regards
Click to expand...
Click to collapse
Hello, could you flash twrp on this phone? I have the same one (mt6762, Android 10) and couldnt find a working twrp Port...
Deleted link to unofficial twrp site
maxxvd said:
Hello, could you flash twrp on this phone? I have the same one (mt6762, Android 10) and couldnt find a working twrp Port...
Click to expand...
Click to collapse
You dont have same fone, you have mt6762, I have mt6765
This worked for me (am using a mac so my terminal lingo may be different)
Device: Ulefone X5 2019
Chipset MT6763
Processor: arm64-v8a, A-only system partition
Reset device
Enable developer options, USB debugging, and OEM unlock, then in terminal, do:
adb device
adb reboot bootloader
fastboot flashing unlock_critical
Device is now unlocked and reboots (unlocked warning now appears on reboot screen)
——
Then I installed TWRP & Magisk:
Re-enable developer options, USB debugging, and OEM unlock
To flash the TWRP recovery.img: Copy the TWRP recovery.img into the platform-tools folder, and from that folder, do:
adb reboot bootloader
fastboot flash recovery recovery.img
Then once finished, hold down the power and volume up buttons until it shuts down and restarts (restarts in TWRP recovery)
——
• Download the latest Magisk installer file and put it in the ADB (platform-tools) tools folder (or in your device storage)
• Inside TWRP, go to Advanced > ADB Sideload, then do adb sideload Magisk.zip (replace Magisk.zip with the Magisk zip filename )
Swipe the slider to install Magisk
Tap Reboot System
Hi, just got a brand new Armour x5, bought unlocked. It has Android 10 on it. First, I would like to back up entire phone without installing any apps at all, adb or fastboot commands to do so would be appreciated.
I tapped developer options 7 times, enabled adb, and OEM unlocking. I then adb reboot fastboot after allowing pc to connect, and in fastboot I try:
fastboot oem unlock
and
fastboot flashing unlock
C:\adb>adb devices
List of devices attached
3082SH1001004262 device
C:\adb>adb reboot recovery
C:\adb>fastboot devices
3082SH1001004262 fastboot
C:\adb>fastboot oem unlock
...
FAILED (remote: Command not supported in default implementation)
finished. total time: 0.010s
C:\adb>fastboot flashing unlock
...
FAILED (remote: Unrecognized command flashing unlock)
finished. total time: 0.010s
to no avail, fastboot just looks blackscreen and the tiniest of fonts lol... yes drivers are installed.
So I reboot, and try the Armour 6 tut, but Magisk manager has no option to patch the boot.img I extracted from stock firmware, it also has a distinct lack of advanced settings, most likely due to my not yet having flashed a twrp or magisk-20.4 due to still unable to find out about dm-verity, (is dm-verity different between android 9 + 10?) meaning I wont flash anything that will brick the fone before i even put a sim into it.
Any help appreciated. Google sux.
Edit: Well after 12 or so hours I can honestly say that rooting is all gone downhill, does anyone actually know what they are doing nowadays?
I read all 5 copies of the rooting procedure for this phone, none of which is anywhere near complete, and so very wrong. What might have worked years ago does not work now.
In the Armour x5, when rebooting into fastboot using adb reboot fastboot, we are taken to a black screen with the smallest of txt saying fastboot. This fastboot does not ****in work ('scuse the swearing) so dont tell people to do this, it wont work. Nothing works in this fastboot mode. What you have to do is go into ANOTHER fastboot, by going into what we call recovery, by pressing power and volume up button, then choosing fastboot, ONLY then will fastboot commands kind of work. I say kind of, because most of the fastboot commands do nothing anyway, but at least show some output proving that booting into fastboot from adb is useless now.
For instance, in the pure black screen fastboot, nothing is found in adb or fastboot shell, no 'null' (needing activation), no waiting, just black nothingness. But in the recovery version of fastboot, we see fastbootd at the top of the screen, this is the fastboot that recognises at least partial commands. But none I have actually tried re finding bootloader lock status etc, nada.
I also noticed, I do have shell access when in adb, but not recovery, so if anyone knows how to flash a twrp for android 10 using shell with no root, I'll try it on my not so shiney brand spankin blank fastbootin fone
Hello there,
A newbie here, trying to unlock a TCL 20B (6159K) phone.
Android 11, November 2021 security patch (MTK Easy Su doesn't work with that, reportedly some vulnerability was patched), fastboot accessible but acting weird.
1. Got fastboot from here.
For some reason it doesn't understand the -i option, but connects with the only phone I'm trying to unlock attached anyway.
VID is 0x0e8d, btw.
2. Got adb from don't remember where about a year ago (for my previous Lenovo phone)
3. Unlocked the Developer Options
4. Checked "Allow bootloader unlock" and "Enable USB debugging" options there (not sure how those are named exactly in English, but I 100% guarantee, I've checked the right ones)
5. Sent phone into fastboot with
Code:
adb boot bootloader
6. Checked the unlockability with
Bash:
fastboot flashing get_unlock_ability
(bootloader) unlock_ability = 16777216
OKAY [ 0.005s]
Finished. Total time: 0.006s
7. Tried to unlock the thing, but
Code:
fastboot flashing unlock
FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
and
Code:
fastboot flashing unlock_critical
FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
8. Searching here, on XDA forums revealed there's no TCL 20B sub-form.
9. While there are tons of topics on not allowed in locked state, none of those helps.
fastboot oem unlock is seemingly an old way to do things (TCL 20B is a rather new device released WAY past 2015)
TCL is an Alcatel device, not a Xiaomi or some ZUK one, to require an account (haven't found anthing on "alcatel account")
trying to load some recovery from PC that might work failed as well (for the same reason)
Code:
[/LIST]
./fastboot boot twrp-3.6.1.img
Sending 'boot.img' (8932 KB) OKAY [ 0.212s]
Booting FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
I've read some TCL 10 phones don't even have a fastboot, but TCL 20B clearly does.
Any Ideas how to unlock the bootloader?
P.S. Maybe a new sub forum for 20B? This got placed into the "TCL 20 5G" one, which doesn't seem right.
EDIT:
Ok, have found how to proceed on my own.
Even rooted the thing.
Go here https://github.com/bkerler/mtkclient, grab the ISO, backup, install patched magisk, patch the boot_a, flash patched boot_a and empty vbmeta_a, erase metadata, userdata and md_udc. Reboot, reinstall pathched magisk.
Don't lock the bootloader to avoid red state.
Huge kudos to mtkclient devs
Hello, i been trying to root my tcl 20b (6159a) but i cant figure how, i follow the instructions of mtkclient. Install it in windows, python, mtk repository, all the process, but when i try to replace boot_a.img it doesnt work from the cmd command, but in the python mtk_gui i can replace boot_a.bin and erase vbmeta_a.bin when i do it from there the cellphone keep in bootloop, i can fix the bootloop but cant root it. If u read this, can you plz be more specific with the steps, and made a little tutorial, its not necessary images or video just some more in deep info how you achieve root, thx
I'm at a total loss here...
phone has unlocking and USB debugging toggled on.
phone is not a US phone and unlocking is allowed.
phone goes into fastboot mode (by turning on while holding volume)
"fastboot devices" command returns my phone is in fastboot and connected
"fastboot oem unlock 0xPASSWORD" returns FAILED (remote: 'Command not supported in default implementation')
and fastboot: error: Command failed
I have no idea what to do or try from here.
If I try to flash an image i get:
FAILED (remote: 'Download is not allowed on locked devices')
so, defiantly still locked out of the bootloader
Try below steps
1. Ensure you have platform tools 33.x , 34 has issues.
2. Try to reboot to bootloader from pc.
adb reboot bootloader
3. Try running
fastboot flashing unlock unlockcode
Try it :
fastboot oem unlock
or
fastboot flashing unlock
SOLVED I am so happy. I'm on day 3 of trying to get the phone to bootload.
there is definitely a difference between going into fastboot through the phone itself and through adb commands on PC.
fastboot through the phone shows the drop down menu and no blue light illuminated on phone.
fastboot through adb phone is black screen with a blue light on right corner on the phone.
the windows drivers behave differently between the two. I am running windows 10. phone model XQ-CT72
steps that solved the issue. For anyone in the future.
I downloaded and used platform tools version 33.0.3 NOT version 34.
"adb reboot bootloader" used from windows PC
opened windows device manager found my "discovered device" and forced it to use the SONY driver downloaded from sonys website. It would not detect it on its own, or even use the SONY driver without me telling it to specifically. device manager> "andorid" > properties > update driver > browse computer for driver > installed sony driver
everything worked following these instructions here https://www.droidwin.com/unlock-bootloader-and-root-sony-xperia-1-iv/
alexriethmeier said:
There is definitely a difference between going into ...
Click to expand...
Click to collapse
fastboot, part of the android bootloader, abl
fastbootd, part of recovery
I had same issue and same solution fixed it what you showed and did. I was terrified, after investing so much money on this phone and not getting it unlocked.
You won't need to go through such hassle if you just use Linux VM (a Ubuntu distro will do). The driver works out of the box.