Hi guys i would like you ti tell me if there is any kind of protector bumper or case for the fossil q founder. As far as i know i havent seen any kind of protector.
Thanks
To my knowledge there are zero to no accessories for these watches. Unfortunately
I'm a little late here but I will let you I is my experience. The q founder and moto360 1st gen are almost identical in size. I personally use the bumper and screen proctector from the moto360 and it is almost a prefect fit. Give it a shot
MotoHo said:
I'm a little late here but I will let you I is my experience. The q founder and moto360 1st gen are almost identical in size. I personally use the bumper and screen proctector from the moto360 and it is almost a prefect fit. Give it a shot
Click to expand...
Click to collapse
Same here, but when Fossil replaced my watch, they only had the GEN 2, and the screen is slightly smaller, so no screen protectors now.
eBay is your friend. I just ordered a 3-pack of tempered glass protectors for my Gen 2 Marshal.
Related
I was looking for other screen protector's this morning and saw this on Amazon.
Lexerd - Viewsonic G Tablet TrueVue Anti-Glare Laptop Screen Protector (Dual Pack Bundle)
Price? Pretty expensive if you ask me $47.99 for a dual pack bundle.
I figured I would share since my momma always told me to be nice and share
uhmm. I see..
I see. but,, It seems expensive..of cause,every one like the different price and products
They are on Ebay as well, singles for $29.95 instead of the dual pack bundle.
I may order one of these......I'll keep looking a little more into this, seems it could be a good fit.
Can someone leave a link to the Screen protectors?
thetechman123 said:
Can someone leave a link to the Screen protectors?
Click to expand...
Click to collapse
Double
http://www.amazon.com/Lexerd-Viewso...2?ie=UTF8&s=electronics&qid=1292035013&sr=8-2
Single
http://www.amazon.com/Lexerd-Viewso...1?ie=UTF8&s=electronics&qid=1292035013&sr=8-1
12.4" LCD Screen Protector 3 Layer
I just ordered a screen protector from Ebay including shipping for $3.99. It's a 3 Layer 12.4" LCD Screen Protector. I just need to trim it to the G Tablet. Just copy the above title and paste it in Ebay so you can see the description.
I purchased these (lexard two pack from Amazon). All in all they are good. It reduces the reflection a bit. The camera and light sensor holes are not an exact fit. There were quite a few bubbles after install but after a few days, most are gone. It does look like it will do the job of protecting the screen.
All in all, a little expensive but better than a scratched screen.
Screen Protector $9.99
I just oredered one from B&D custom for $9.99 shipping was a little high, but still cheaper than some of the others.
Sorry can't post links yet.
bandegifts dot com
I received the single pack today the edges are curved I have not install it yet but might be tomorrow
The Lexerd screen protectors are crap!
Recieved the product and it was no where near up to my standards.... thin and flimsy... it had dust on it already before it was applied (between the screen protector and the piece of plastic that you peel the proctector from. When massaging bubbles out, the included smoothing tool scratched the protector.
judo54 said:
I just ordered a screen protector from Ebay including shipping for $3.99. It's a 3 Layer 12.4" LCD Screen Protector. I just need to trim it to the G Tablet. Just copy the above title and paste it in Ebay so you can see the description.
Click to expand...
Click to collapse
I hope this cheap one is good or at least decent. I just ordered one.
I was shocked that a screen protector in a store is like $40 also. And then you have to cut it to size, still.
Update
Scorp9 said:
I just oredered one from B&D custom for $9.99 shipping was a little high, but still cheaper than some of the others.
Sorry can't post links yet.
bandegifts dot com
Click to expand...
Click to collapse
Unless they sent me the wrong one..... It only covers the viewing area.
I guess, it will do until I can get one that fully covers. It was only $9.99 but still dissapointed it doesn't cover it fully.
Scorp
looked in stores; ordered online
Couldn't find anything to fit in stores; have ordered a more expensive (about $29 with shipping) one from NuShield - is supposed to fit. Will add to thread once it arrives.
I bought the B&D one too. Only covers the viewing area. Waiting to find a full face one also... better than nothing for now.
judo54 said:
I just ordered a screen protector from Ebay including shipping for $3.99. It's a 3 Layer 12.4" LCD Screen Protector. I just need to trim it to the G Tablet. Just copy the above title and paste it in Ebay so you can see the description.
Click to expand...
Click to collapse
@judo, how was the quality of this screen protector, is there a lag in response.
txphoto,
How did the screen protector from NuShield work? I need to order something as this is killing me not having this screen protected... please provide some feedback!!!
Rick
txphoto said:
Couldn't find anything to fit in stores; have ordered a more expensive (about $29 with shipping) one from NuShield - is supposed to fit. Will add to thread once it arrives.
Click to expand...
Click to collapse
just bought this on ebay
just bought this on ebay 3 Layer 12.4" LCD Screen Protector. I hope it has anti figerprint because Its not made for Toch screens.
-------------
josuetenista said:
just bought this on ebay 3 Layer 12.4" LCD Screen Protector. I hope it has anti figerprint because Its not made for Toch screens.
Click to expand...
Click to collapse
let us know how it is, once you have it.
I just got this one in
http://www.amazon.com/KlearKare-Inv...?ie=UTF8&s=mobile&qid=1294539861&sr=8-1-spell
Expensive but its amazing. Smooth as glass and I know it can take a beating. Doesnt even look like there is anything on my screen
Hi guys and sorry if there's already topic like this. I'm proud new owner of G3, but I wonder what kind of a tempered glass screen protecor to buy? I think about Spigen or Ultimate shield. May be I prefer Spigen , but what is your opinion?
Pipp0o said:
Hi guys and sorry if there's already topic like this.
Click to expand...
Click to collapse
there is, so why make one? Really, did you even bother to just look down 2 thread? How about search the word screen protector?
http://forum.xda-developers.com/showthread.php?t=2825074
http://forum.xda-developers.com/showthread.php?t=2813365
Got NillkIn Tempered Glass on my old Nexus 5, realy amazing, no fingerprints and very easy installation
The exact name is "LG G3 Nillkin Amazing H+ Anti-burst Tempered Glass LCD Protector New". Im an "new user" i cant post outside links... U can find it on ebay par example for ~11$ with shipping costs
I bought an other for the G3
I really recommend you this article
Regards,
Loris
I purchased the nuglas and for £6.99 it is worth every penny. Good fit, no fingerprints and I like the silky smooth feel which is very good for Swype typing.
Sent from my LG-D855 using XDA Free mobile app
This one has the highest hardness rating, rounded edges, anti-fingerprint coating, and is only .03mm thicker than the spigen while half the price.
I ordered the spigen and wasn't impressed. It was a little smaller than the phone's glass - meaning the edges could get chipped or cracked and then spread. I would have kept it but this was the first time I put a protector on and I messed it up a couple times and then it wouldn't stick well. Some corners weren't quite perfect which is partly why I had trouble aligning it (I didn't notice this until after). I ordered the one in the link but haven't had a chance to put it on yet.
http://www.amazon.com/Tempered-Screen-Protector-SWISS-EDGE/dp/B00KQGDTN8/
Please continue discussion in the links in post #2
Closed
Anyone planning on putting a screen protector on there 360?
If so which Brand and Type?
Definitely, I'm scared to death when walking past a brick wall or any hard object at the height of my wrist.
As a matter of fact mine just arrived today: The Nillkin Ultra clear AF. Which is for the original moto 360.
This is the only one available in my country and it fits, sort of. The protector stretches to the end of the glass, but i'm afraid it may be 0.01 mm too wide and come off easily... Only time will tell how it holds.
UPDATE:
Original moto 360 1st gen protectors fits and works like a charm.
As soon as I got my watch I purchased a screen protector. I got the Skinomi brand. I have a video on it as well. https://youtu.be/YVI_B0Hx-bE I've been using it for about a week now without any issues.
I got these from eBay UK... http://www.ebay.co.uk/itm/301415179883?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Can't really see it when looking at it head on but can when it's at an angle, see pic.
It's really good for the price.
I've used one on both the new and the old Moto 360 and I'm sure that I have saved my display several times because of the damage taken by the screen protector.
Any glass recommendations for the BLU R1 HD device?
I am looking for the same. I found some on AMZN but dont know if to bite the bullet on them.
Amazon Screen Protectors
Honestly I wasn't going to put one on, because for me it's just a cheap backup, But after one day of use I already have a few very small scratches on the top right hand corner, Gorilla Glass 3 isn't doing great and my OCD is already bothering me.
If I get scratches on the actual screen area I'll lose it lol
On Amazon their are three choices and honestly they very well may all be manufactured by the same company based on the listings
BLU R1 HD Screen Protector [Tempered Glass], Popsky 0.26MM Ultra Thin 9H Hardness High Definition HD Scratch Proof Premium Screen Protector Glass Protective Film $8.50 w/ Shipping
[2 Pack] BLU R1 HD Screen Protector, Nearpow® [Tempered Glass] Screen Protector with [9H Hardness] [Crystal Clear] [Easy Bubble-Free Installation] [Scratch Resist] $9.99 - Free Prime Shipping
BLU R1 HD Tempered Glass Screen Protetor, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness Shatterproof High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone - $8.30 with shipping
They are all 0.26MM
They all have 2.5D edges (which should match better with the 2.5d screen
They all have oleophobic coating
They all list Anti scratch/shatter/explosion.
My advice would be that if you want a backup protector and have prime go for the second one, otherwise the last one is 20 cents cheaper and most likely they are all the same screen protector just repacked by different companies which is extremely common. For a buck and some change more I'll probably go with the second one and let you know how it goes.
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
thirdlobe said:
I ordered the one from Nearpow. I will update this when it comes in and I install on my BLU R1 HD.
Click to expand...
Click to collapse
Looking forward to your review as I'm looking at that one myself.
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Any updates on best screen protectors, no scratches yet, but i have saw a post or two about how easy this screen scratches.
The one I purchased arrived last night and I took off 6 for a .99$ plastic protector that I bought. That protector never say well so I gave the glass a try. Unfortunately the glass one sat just as poorly. Where the cut outs were for the camera and the LED the glass did not fit flush against the phone and showed as it was lifted.
I have taken both off and am just using the phone naked.
IMO
In my personal experience *most* screen protectors are created equal. My sister bought one off Amazon for 10$ and I bought one for 1.50$ on Ebay, When they arrived her's was in a fancier box but inside the boxes they had almost exactly the same contents. I tried scratching mine with a knife, and it didn't scratch (so it was glass). I'd say it is worth the risk (only 1.50 shipped in the same time as amazon one)
EvoKnvl said:
I got this one early on.
https://www.amazon.com/gp/product/B01I61Y33Y/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
When I received the product, it didn't look like the one in the picture. Honestly, the shape and the cut outs looked like the other ones you listed. Fit was horrible. The Blu has a lot of curve and the edges weren't able to seal. Lots of lift around all the borders. Hopefully, these other ones are better.
Click to expand...
Click to collapse
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
movielover76 said:
I bought the nearpow one and the fit was awful, because of the 2.5D glass it just didn't adhere on the sides at all and it wasn't even close to full coverage. I've chosen not to worry too much about the screen, it's a $60 phone.
I just bought a cheap case that has a bit of a lip to stop the screen from touching stuff. If I place it face down for example.
Click to expand...
Click to collapse
Same, because the phone screen is not square in the sides the protector don't adhere like it's supposed too
Does anyone like the nearpow ones from amazon? I bought the box with two of them but haven't put one on yet. I'm wondering if it's even worth trying since reports so far don't seem to good. I can see where it might be more challenging to make them for a screen with rounded edges. I have two of the phones now and like them very much so am interested in protecting them.
I purchased this one:
"BLU R1 HD Tempered Glass Screen Protector, Vikoo Scratch Proof 0.26MM Ultra-thin 9H Hardness High Definition HD Ultra Clear Screen Protector Glass for BLU R1 HD Phone"
from amazon.
Does not fit cleanly.
Given all these reports I am beginning to wonder if these are even tested or manufacturers just assume it will work once cut out to size.
Sadly, i'm just joining in the bad news. I purchased the Qosea Ultra-thin 2.5D 9H Hardness Crystal Clear Scratch Resistant Tempered Glass Screen Protector for BLU R1 HD and so far it-s the same result, it doesn-t stick on the edges because of the curvature of the screen. I'm still using it because i don't want to ruin the screen so i'll be waiting for the confirmation of a tempered glass that actually fits the screen properly.
I'm a bit baffled reading all the comments here and on amazon. It truly seems like nobody tested these things. I-m starting to think there are fake commenters because each glass protector have at least one 5 star review telling about how amazingly fits. Followed by nothing but unsatisfied people.
I have had mine since release and it's still in good shape. Don't see a point in getting any protector for such a cheap phone.
Well it's not exactly tempered glass but the reviews are better as to fit. Apparently it's a hard plastic. I'm getting this phone for my kid so something needs to go on there becasue he's not exactly not clumsy.
https://www.amazon.com/dp/B01HQOTA1M/ref=psdc_2407781011_t3_B01N4DEMZY
Guys suggest a tempered glass for Oneplus 5 which doesn't eat the display ratio.
kratozzumar said:
Guys suggest a tempered glass for Oneplus 5 which doesn't eat the display ratio.
Click to expand...
Click to collapse
There are a few tgsp that are completely clear but they don't have full coverage of the panel. Any of the full coverage protectors have black borders. Some thicker borders (e.g. the OP5 tpsg) cover a few pixels on either side and others only are noticed when you angle the screen to one side or the other.
By far the most important thing to do when selecting a full coverage tgsp is to match it with a case that does not press into the protector eventually lifting it. For instants I originally purchased a Orzly 2 pack tgsp. The first one lifted when matched with a cheap clear plastic case near the buttons and eventually (3 weeks) dust got under the cover. I switched to an aluminum bumper case with no flex near the buttons then put the second Orzly on. So far (since Oct 7th) I've had no dust or lifting.
When I buy a replacement for the Orzly, for what ever reason, I'll be buying a full coverage/full adhesive tgsp and keep using my current aluminum bumper case.
OMYFILM OnePlus 5 Protector [Tempered Glass+Carbon Fiber]
Here's a review.
There are other options you can find by sifting through the various posts but again the most important thing is to match the tgsp with a case or you'll just be throwing your money away.
Look for Auckly full adsorption screen protector on amazon. It has been discussed at length before and can be confirmed by me as well, this is by far the best TGSP out there. Full glue coverage, no rainbow, full screen coverage (even sloped edges) and it fits my oneplus sandstone case
BlueBull2 said:
Look for Auckly full adsorption screen protector on amazon. It has been discussed at length before and can be confirmed by me as well, this is by far the best TGSP out there. Full glue coverage, no rainbow, full screen coverage (even sloped edges) and it fits my oneplus sandstone case
Click to expand...
Click to collapse
Would you mind to give a link as to make sure we're looking at the the right one.
BlueBull2 said:
Look for Auckly full adsorption screen protector on amazon. It has been discussed at length before and can be confirmed by me as well, this is by far the best TGSP out there. Full glue coverage, no rainbow, full screen coverage (even sloped edges) and it fits my oneplus sandstone case
Click to expand...
Click to collapse
Would you happen to know if they have one for the 5T as well ?
Eric214 said:
Would you mind to give a link as to make sure we're looking at the the right one.
Click to expand...
Click to collapse
The first link is the exact one I bought. However it is unavailable at the moment. I seem to have bought the last one, since I wanted to order two but couldn't. It is about the same description as the one in the second link so I think it's the same one. Not 100% though. That second one is also sold by an auckly amazon account and gets a lot of very positive reviews, just like the one in the first link
https://www.amazon.co.uk/dp/B074SH4HZR/
https://www.amazon.com/Auckly-Adsorption-Bubble-Free-Anti-Scratch-Protection/dp/B074PPMGQC/
Keep in mind, the sandstone case I have (official oneplus accessory) is very thin so I don't know if it will fit bulkier cases. By the way I read the original post a bit too fast. This screen protector does cut off a few pixels, about the same amount as the official oneplus TGSP which I shattered a few days ago (they discontinued it, so can't get it anymore)
The description in the second link made me laugh
Unlike other OnePlus 5 screen protectors using physical glues, this Auckly glass film utilizes magical adsorption capacity, automatically adsorbs on the screen and exhausts the bubbles
Click to expand...
Click to collapse
but they are right though. I have installed a lot of different screen protectors but this one did something special. As soon as I let it go it sucked itself to the screen and pushed out all the bubbles. I didn't even need to push down, though I did just to be sure. I've never had such an easy application, it essentially applied itself once I laid it down. You can see it in action on the video on this link. In my case the bubbles were pushed out completely on their own
https://www.amazon.co.uk/gp/customer-reviews/R2RLL8ML6PI62E/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074SH4HZR
SlyUK said:
Would you happen to know if they have one for the 5T as well ?
Click to expand...
Click to collapse
I don't know that, couldn't find one in any case. Sorry