Related
Haven't really seen any posts on this, so maybe I just got a lemon...
Got my Flyer last night and first thing I noticed was that I had some light-bleed at the bottom of the screen in portait mode. 2 greenish blobs to be exact. Also some more slight bleed along the right side from top to bottom. I cranked up the brightness to just how bad it was, and lo and behold, found 3 stuck pixels.
Examined it a bit more and noticed a slight gap with light passing through along the bottom edge, where the screen meets the bezel. And last but not least, also a jaggy scratch on the aluminum itself.
I'm going to take back to BB and exchange for another, was wondering if anyone else had flaws like these? HTC build quality is usually pretty good, so I was surpised to see this on mine.
Sent from my HTC Desire HD using XDA Premium App
There seems to be some different issues depending on which version people have bought (EU/US/other, Wifi only/3G+Wifi).
I have EU 3G+Wifi,32GB version, my screen and the exterior was perfect, but the touch sensors are totally irratic. Sometimes the far most left edge doesn't respond in portrait mode, some times it seems to respond to nothing at all, just flicking the home screens around, pulling the status bar down, launching shortcuts, or typing random stuff, even the soft keys are buzzing and active when this happens.
It actually did this from the first time I powered it on, and it took me 30 mins to get through the first few steps to get it up an running because it kept pressing the wrong places and quite often hitting the back soft key. I tried a factory reset, it helped slightly, tried recalibrating the keyboard, tried various hacks found around these forums, nothing helped. It seems worse in landscape mode than portrait.
I am getting it replaced by Amazon, which is quite nice since it also seems to acquire scratches very easily, even using the capacitive end of the pen has left tiny tiny marks. So, I ordered some screen protectors just to be on the safe side.
No issues with mine, sounds like you just got a dud.
No issues with my and is 16 gb wifii
Ok, just exchanged and got my 2nd one at a different BB... more problems.
This one also has some light-bleed at the bottom, but not as bad as the 1st one. Also has 2 stuck pixels, you can see them perfectly using one of those screen tester apps. And lastly, the volume rocker is loose, when I pick up the tablet, it makes a rattling sound.
Also weird, when I first booted up, had a default wallpaper of a blue skateboarding Android on a dark background... was not the normal default HTC wallpaper, wtf? lol. The box was sealed shut, had never been opened. Weird.
So back to the store again tomorrow, gonna exchange.
Edit: Tried out one of those stuck pixel fixer apps and didn't work. The stuck pixel is red, can see it perfectly on a dark background. I'd be willing to keep this one despite that, but the loose rattling vol rocker is driving me nuts. Argghh!
Ok, I guess 3rd time's a charm because I got Flyer #3 today and seems to be perfect - no dead/stuck pixels or rattling vol rocker! Everything seems solid.
Interestingly, on #1 and #2, the 3d carousel effect never worked at all. But on this one it works fine. Really surprised I had to go through 2 bum units first to finally get one that wasn't defective..
Let me start by saying that i bought this phone only 3 days ago and these are the problems I've found with it.
1. The Second screen back light issue. This is a common problem among many lg v10 users as i have noticed, and i have that same problem too. to the extreme left of the second display it is brighter than the rest but only when it is off. I do not find this very annoying since i do not use the second display for reading my notifications while it is off. i mostly use it when the screen is on
2. In addition to that, the power button/ fingerprint scanner combo is completely garbage, as in the actual clicking. the button seems loose and when i click it, it squeaks. Also, when i run my finger up and down the power button it wobbles and has the same annoying squeak.
3. The charging port is loose. Not so much that the cable could slide out not in that axis, but it moves side to side freely and up and down. this worries me because i think that if i put too much pressure on the cable the port could break somehow.
4. The steel bezels are nice and stuff but the gaps, are uneven at the bottom left, the metal bezel is like bent and you can easily see through it. also at the back when you pop in the cover it seems like it doesn't align with the bezel. but that might just be my ocd lol
This phone in my opinion is great the best phone I've had. but its just that these things are what let me down. This phone is great but they absolutely ruined it with the quality control. note* my batch is from January 15, 2016
U probably just got a bad one. Sometimes, they make it thru the quality control somehow. I would return it until u get the one ur satisfied with.
Sent from my LG-H901 using Tapatalk
youngpettyboi said:
U probably just got a bad one. Sometimes, they make it thru the quality control somehow. I would return it until u get the one ur satisfied with.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
Yeah I think I should but I'll wait until the weekend and decide if I should change it.
Probably a good idea. The flaws won't change. I have the lightbleed on the 2nd screen, but I never notice unless it's absolutely pitch black where I am and the screen is off. It doesn't annoy me tho.
Sent from my LG-H901 using Tapatalk
YMartin said:
This phone in my opinion is great the best phone I've had. but its just that these things are what let me down. This phone is great but they absolutely ruined it with the quality control. note* my batch is from January 15, 2016
Click to expand...
Click to collapse
I like the phone, maybe I love it. I have the same problem with the residual light on the left of second screen. (phone batch 26 Oct.2015) But, what I dislike the most:
1. The lack of a LED on the front.
2. The second screen, about my opinion is useless until then a developer create an xposed apk for a flashing light on second screen when I loose a call.
3. The fingerprint sensor is useless too for me.
4. Volume of the speaker is not too loud.
But, I like the size and the shape of the phone. It is a catch eyes everywhere I go. Benchmarks are very good for a Snapdragon 808. The screen is very fluid. And the most, the camera and his software are great; you believe or not I compared in photoshop pictures from an expensive Sony semiprofessional DSLR camera with photos made with my V10 and the overall quality are quite the same. It's the best phone I ever had (and I had a lot of top level androids)
I don't want to change it, even on a G5!
H961 dual SIM, rooted, debloated.
The light bleed is a common issue, but everything else sounds like your phone was assembled incorrectly, you should exchange it
Okay so today I was wondering if I could find any more nit picky problems and noticed that the back cover did not sit flush with the buttons and that if I pushed it down it became flushnot a big issue but it bugs me when I'm turning up the volume or turning on the phone
thisisjason said:
The light bleed is a common issue, but everything else sounds like your phone was assembled incorrectly, you should exchange it
Click to expand...
Click to collapse
Well I exchanged a week ago and now that the time limit to return it is over, it cracked, not from a drop. It just cracked by itself there is a small hair line crack right by the metal rail and if is so annoying I paid good money and I take care of my phones well even if this was made to be tough. It cracked while I was in the car waiting for someone and then out of no where I heard a little pop and I thought nothing about it but after I finished watching the video I noticed it and got so scared I was like"did I drop it" but I did not idk how it managed to break I haven't dropped my phone yet and it just cracked out of nowhere
A number of reviewers have noted serious issues with the ips lcd panel on the lg g5, specifically backlight bleeding and "blooming" (when pressure from touching the screen causes distortion). Has anyone else out there with the g5 experienced these issues? If so, will you try to return and get a replacement?
Have noticed neither of these problems. I don't ever run 100% brightness on the screen, then switch to a black background and go into a bathroom and view the screen. And, I don't press the screen hard enough to cause distortion. If you don't do these things, you will never notice an issue.
turbodroid said:
Have noticed neither of these problems. I don't ever run 100% brightness on the screen, then switch to a black background and go into a bathroom and view the screen. And, I don't press the screen hard enough to cause distortion. If you don't do these things, you will never notice an issue.
Click to expand...
Click to collapse
There is clearly a problem more or less with some units ( bleeding light).
And you don't need to push hard to cause distortion.
I have a very strangle faint vertical line on the right side. Not visible with a black background but looks almost blue-ish on a white background. Like a line of a very light shadow.
I've seen this issue too, but not enough to bother me. I didn't notice it with my phone until i read this post.
I think it's due to the design and battery placement. I think there's a very small gap between the battery and the screen, where the LCD is practically floating and when you put pressure on the phone, the screen deflects a bit until it makes contact with the battery. Otherwise, the battery would get scratched up if that gap wasn't there.
Yes, I have a 2nd G5 and it has the same vertical shadow, except much fainter. I wouldn't of noticed this new one if it wasn't for my first phone being so prominent.
Haven't checked for light bleed, but no bloom issues with finger presses whatsoever. I pushed as hard as I was comfortable on several locations and nothing. Also no shadow that I can make out and I am very sensitive to that kind of thing, especially if I'm looking for it.
Sent from my LG-H820 using Tapatalk
I tried swapping out the battery & bottom-chin-thing between my two phones and now my original first phone that had the worse 'shadow line' has improved a little bit. So there's definitely a fault between the contacts that's causing this effect.
It just seems like such a mixed bag in terms of quality control Kills me too, since I've been super stoked for this device since MWC
poisonousjuice said:
I tried swapping out the battery & bottom-chin-thing between my two phones and now my original first phone that had the worse 'shadow line' has improved a little bit. So there's definitely a fault between the contacts that's causing this effect.
Click to expand...
Click to collapse
I'm not completely sure what you mean by fault between the contacts, but i think the issue is due to very small and minute variance in battery shape or size. This variance is probably causing different pressure points on the bottom of the LCD screen causing the shadow.
---------- Post added at 10:03 PM ---------- Previous post was at 09:46 PM ----------
queso_burrito said:
It just seems like such a mixed bag in terms of quality control Kills me too, since I've been super stoked for this device since MWC
Click to expand...
Click to collapse
Personally, I wouldn't call it bad quality control, but rather mechanical and structural design limitations with the materials currently available for use. The thickness of the G5 is only 7.7mm (0.303 inches), that's pretty incredible with a phone that has a removable battery. By comparison the Galaxy s7, is 7.9mm (0.311 inches).
I maybe speaking out of line here, but from an engineering point of view, I am impressed with the design. I am a little worried about the battery swelling up crowning the screen, but i guess i can change the battery if that happens. I've had some battery well up a little in the past...
I've had the phone for 5 days and the more i use it, the more i like it. Believe me, i'm looking for every reason to hate the phone while i still have 8 days to return it if i wanted to. After that, i'm stuck with it for two years.
I don't have any technical knowledge with this stuff but just thought perhaps there's some kind of interference or feedback happening near those plugs next to the battery inside that's causing it like when you hold a magnet up to an old tv.
The battery of my last two phones (Droid Maxx & Galaxy S5) both swelled up which is why I went with the only phone that offers a replaceable battery
FYI, I have a small magnet attached to the battery for my wizgear phone holder in my car. No issues with the screen when I press hard. There is definitely an interference fit now sliding the battery out, but it's not causing any issues.
poisonousjuice said:
I don't have any technical knowledge with this stuff but just thought perhaps there's some kind of interference or feedback happening near those plugs next to the battery inside that's causing it like when you hold a magnet up to an old tv.
The battery of my last two phones (Droid Maxx & Galaxy S5) both swelled up which is why I went with the only phone that offers a replaceable battery
Click to expand...
Click to collapse
I'm pretty sure a swollen battery in a G5 will absolutely destroy the phone.
Fadman37 said:
I've had the phone for 5 days and the more i use it, the more i like it. Believe me, i'm looking for every reason to hate the phone while i still have 8 days to return it if i wanted to. After that, i'm stuck with it for two years.
Click to expand...
Click to collapse
Ditto. The issues AP and others have reported, I've not seen at all. My only real complaint is not being able to do tap to focus reliably on the camera.
I have the led bleed issue, but now I also have image burn in as well. you can see a faint update popup box and notification bar on the screen.
I'm assuming the phone updated last night, and when it finished, it never turned the screen off and left me with what I'm hoping isn't a permanent reminder of the update pop up ghosted on my screen.
LCDs don't burn in. If you have anything it is image persistence. Leaving the screen off for a bit (like overnight) and should clear itself.
alexp999 said:
LCDs don't burn in. If you have anything it is image persistence. Leaving the screen off for a bit (like overnight) and should clear itself.
Click to expand...
Click to collapse
I'm noticing it's going away on it's own by keeping the screen off, so you're right it isn't a burn in. thank you for informing me. I'm still getting it replaced however due to the backlight bleed.
A coworker of mine was given a G5 as part of an advocacy program. Within 3 days of getting the phone before the actual launch day, half the screen was unresponsive. We turned it off and next thing we saw was half the screen was showing the home screen, and the other half was stuck on the LG startup. Seems the G5 is having the same issue that LG recalled the G4 for.
scottricketts said:
Ditto. The issues AP and others have reported, I've not seen at all. My only real complaint is not being able to do tap to focus reliably on the camera.
Click to expand...
Click to collapse
I agree, i wouldn't call tap to focus a 100%, but one of my favorite futures with the camera, is the manual focus. I think that for me that makes up for it. Do you know if the s7 has manual focus?
ive noticed this im on my 4th phone from att. I love the phone but i cant deal with it it bothers me too much. i will be returning it soon.
So a couple things but my main issues is maps. I haven't found anyone with this problem yet. When driving the navigstion marker is constantly pausing. Maps is not freezing however. The marker just stops and stays stopped for like 5 seconds then catches up and tracks me for 1 second or 2 then stops again.
Another issue I've noticed as I have called for a replacement(I actually have had to call twice and have three lg g5's in front of me) is that when I got my first replacement the screen seemed kind of dull compared to my original. When I put the two next to each other i realized that it wasn't that it was dull but a bit yellowish. My original reason for wanting the phone replaced was because of maps, the button to eject the module was not flush and stuck out at an angle and the module piece itself was offset. This phones button and module piece were fine and so I called again and they sent out another one. This thrid phones screen has the same issues as well as the original issues from my first phone. I spent an hour making sure all the settings were the same and even ruined my screen protector by taking it off to make sure all phones were under similair conditions. I'm now not sure what to do. Should i call them up and ask them to send out a fourth one? This is becoming insane.
Would you have noticed the yellow tint if you did not have another sitting next to you? I noticed my battery eject button looked a little crooked when I read your post and pushed on it a bit and now it is flush.
Sent from my LG-H830 using XDA-Developers mobile app
Zerdalias said:
So a couple things but my main issues is maps. I haven't found anyone with this problem yet. When driving the navigstion marker is constantly pausing. Maps is not freezing however. The marker just stops and stays stopped for like 5 seconds then catches up and tracks me for 1 second or 2 then stops again.
Another issue I've noticed as I have called for a replacement(I actually have had to call twice and have three lg g5's in front of me) is that when I got my first replacement the screen seemed kind of dull compared to my original. When I put the two next to each other i realized that it wasn't that it was dull but a bit yellowish. My original reason for wanting the phone replaced was because of maps, the button to eject the module was not flush and stuck out at an angle and the module piece itself was offset. This phones button and module piece were fine and so I called again and they sent out another one. This thrid phones screen has the same issues as well as the original issues from my first phone. I spent an hour making sure all the settings were the same and even ruined my screen protector by taking it off to make sure all phones were under similair conditions. I'm now not sure what to do. Should i call them up and ask them to send out a fourth one? This is becoming insane.
Click to expand...
Click to collapse
M8, internet is filled with people having issues with G5. Before you say S7 fanboy i have mine pre-ordered already.
All these issues are making me want to cancel my order and wait for something else. I really want to give LG the benefit of the doubt but everytime i open up a webpage regarding G5, there is always someone having an issues of some sort.
I am beginning to think that all this QC issues are actually true and LG really dropped the ball with G5.
As for you question, Return it !! All these faulty units are being floated between customers without them being sent back to LG and thats why you will never get a perfect unit. Wait for something like Nexus 7 or HTC/sony heck even Mi5 Pro if you can get ur hands on one.
GL
Probably not. However, after seeing it I can tell without comparing it to another device. I had my friend come in and randomly show me one of the devices at a time and everytime I could pick out the yellowed ones. They also don't get as bright, it's not significant however. I feel that you wouldn't notice it until you see somone else's device. Then after that it will be all you can see. In the morning I'm going to test them to see if they also have the screen bloom and backlight bleed. If so then that just might be another side effect of the bad screens.
Ray,
I honestly wouldn't worry. The only place I see these problems being dicussed is here and it's not even a flood of people. It's pretty minor conpared to how many people probably have these devices in hand already. I still love this phone despite these problems. In fact, it's so far my favorite phone I've had in a while.
Here's a light review of the phone from Clove:
https://www.youtube.com/watch?v=mbFeUoVyT9Q&feature=youtu.be
Preorders up today as well.
Unboxing vid. Looks like they went with a nicer packaging this time.
VS. an iPhone 6 vid
VS. the Z5 Compact vid
i have bought yesterday the white x compact. unfortunately its a bit larger than the z3c. well im a bit disappointed but not because of the sd 650. the performance is quite good. its definately responsive and quick for a compact. but the bezel on the bottom is bigger than at the top. looks like a design fail. vibration motor is veeery strange imo. at start you dont feel him when typing but the faster you type the more the motor is vibrating. this behavior is very hard to accept. maybe for some people a minor thing but for me when i got used to my z3c this not ok. the whole left side beside the display has a gap between display and frame. on the right side there is no gap. dust and dirt wil again find a nice place there. this was the reason why i have replaced my white z3c with a black one after the motherboard was dead on the white one. it seems sony has not learned from their mistakes. fingerprint button has also gaps and looks like a bit deplaced but works very well. on the back side there you have gaps on top and bottom. i really do not understand sony. this phone costs 450€ and it seems they have no QA before packaging. camerawise i can see some improvements. focus is much faster than z3c. but the camera quality nowhere comparable to a galaxy s7. its ok but not that i would say wow. front cam is better than z3c. no softskin blur effect more but when it gets dark the front cam is not very good. generally i was expecting more from sonys camera system.
the best thing at this phone is the display. the black values and color reproduction is very good. looks like amoled but is probably a very good ips. but i think its displaying to much red. adjusting whitebalance helps. generally much better than z3c. due to the 2D glass curves it seems that display is almost printed regardless the 720p.
but there is also somehting that is causing me headache with the display. it seems that due to the curved glas the letter "P" is sometimes not very responsive. especially if you are trying to hit the letter from the right side throught the curved area of the display. from top no prob but from the side its sometimes not reacting. tested with google keyboard.
loudspeakers are a bit louder probably due to the lack of water resistance. they sound better.
the phone goes back as i have got massively used to have root. i'm still on kitkat with root and xposed and several changes through xposed. loosing all this to a non perfect phone makes no sense for 450€.
the biggest problem is that there are no smartphones at 4,6inch with good quality anymore. i was even thinking about iphone but no thanks. i dont want to be a slave of itunes and pay more than 750€ for a phone. SE is too small. z5c is overheating, bulky & too rectangle. A3 2016 is 4,7inch and therefor longer. could be ok. BUT it has no fuc*** notification LED. major fail by samsung as this is inacceptable in 2016. but generally the build quality by samsung has raised. the galaxy s7 in a size of 4,6inch would be perfect. im remembering the times with my galaxy s1. fantastic phone and it was undestroyable. well if you have any questions you can ask me until i have still the phone. currently im thinking of testing an s7. but i hate to to do strange things with my thumb just to be able to reach the back button on the bottom of the phone. the s4 mini was perfect size.
So you are returning the phone?
I will give this phone a try but your build quality comments concern me. I should have it this week, so I'm hoping I get a good one. Does the plastic, glossy shell feel as cheap as it looks?
True, it's sad that these phones are the only game in the 4.6" size. I kinda don't consider the 4.6" iPhone in this size class because its just as big as a 5" screen phone because of the home button. I'm hoping Samsung comes out with an S7 mini which I would get in a heartbeat.
uchosen said:
So you are returning the phone?
I will give this phone a try but your build quality comments concern me. I should have it this week, so I'm hoping I get a good one. Does the plastic, glossy shell feel as cheap as it looks?
True, it's sad that these phones are the only game in the 4.6" size. I kinda don't consider the 4.6" iPhone in this size class because its just as big as a 5" screen phone because of the home button. I'm hoping Samsung comes out with an S7 mini which I would get in a heartbeat.
Click to expand...
Click to collapse
try it. the plastic glossy shell is not the problem. its nice to look at, looks a bit like ceramic and not so slippery as i thought but the build quality is again not the best. i hate the unsymetric gaps between frame. they just cant place the display equally into the frame. on the black (which is not true black, its more dark blue) you wont see them so much as on the white one.
i was hoping for a s7mini but it seems that samsung has changed the mini series into the A3 line which is really sad unfortunately in the stores theres always the anti thief thing on the back which prevents to get true feeling of the normal S7. i need to test if a S7 would somehow be operational with one hand for me. but i dont think so. :/
the display of my z3c is peeling of on the top left edge which was the reason iw as looking for a different phone. i need to repair this. sony would need to much time for this.
x10isrooted said:
..vibration motor is veeery strange imo. at start you dont feel him when typing but the faster you type the more the motor is vibrating. this behavior is very hard to accept...
Click to expand...
Click to collapse
i didn't realize that with swift key. but you are right. if you set to system vibration you have that issue. but me, i am using swift key where you can set you individual vibration duration and that works like a charm.
x10isrooted said:
the whole left side beside the display has a gap between display and frame. on the right side there is no gap...
fingerprint button has also gaps and looks like a bit deplaced...
Click to expand...
Click to collapse
on my xxc the gaps are all the same size and nothing is deplaced.
x10isrooted said:
..but there is also somehting that is causing me headache with the display. it seems that due to the curved glas the letter "P" is sometimes not very responsive. especially if you are trying to hit the letter from the right side throught the curved area of the display. from top no prob but from the side its sometimes not reacting. tested with google keyboard.
Click to expand...
Click to collapse
can't confirm that too.
the 'p' works just fine. (swift key)
x10isrooted said:
the phone goes back as i have got massively used to have root. i'm still on kitkat with root and xposed and several changes through xposed. loosing all this to a non perfect phone makes no sense for 450€.
Click to expand...
Click to collapse
i hope, root is just a question of time. i hope very soon. can't wait for it to make all my customisations i am used to.
i found a way posted here but its written so weird. i dont know if its reliable.
http://www.sadroid.com/root-sony-xperia-x-compact-5-minutes/
the individual vibration is the same. the often and quicker you are pressing a button the more the motor of the vibrator gets crazy. sound like a bee on Speed.
You must try to press the letter p probably from the right side. a bit through the curved glass. the galaxy s7 and z3 compact touchscreen is much more responsive and sensitive. for me it was often not reacting when i was not thinking to touch more precisely in the middle of the letter P. maybe a defect on my device but i think the whole touchscreen production will be affected by this. i have tested the Xperia X and it has the same behavior. i will have to test another device in store if this is the case there as well.
this website is untrusted. dont download anything from that. you will get a virus. nothing else. when a root is availbale someone will for sure post it here first. but i doubt that it will be soon. x compact has not the best specs. all the famous and talented devs have other phones currently. xxz0o was the person that developed a root for z3c after half a year i think.
ok. now i found the issue with the vibration. your duration seems to be set pretty long. i set it to 35ms and that works absolutely fine. but if you set it to f.e. 60ms you have that issue. but why would you like to have it that long?
i mean its obvious that it can be a prob. if your next press is in the range of the 60ms there is no other way for the phone to vibrate permanently. are other phones adjusting the vibration if you press faster than the setted duration?
but i am a slow writer. maybe i will never understand that problem. i just found that issue while pressing complete randomly on the keyboard. i could never write that fast.
jeah, as i thaught. the page is very weird. i would also only try a root from a page i know pretty good.
ohh. half a year? thats sad. but hope never dies.
i like the phone. maybe there are some others
x10isrooted said:
try it. the plastic glossy shell is not the problem. its nice to look at, looks a bit like ceramic and not so slippery as i thought but the build quality is again not the best. i hate the unsymetric gaps between frame. they just cant place the display equally into the frame. on the black (which is not true black, its more dark blue) you wont see them so much as on the white one.
i was hoping for a s7mini but it seems that samsung has changed the mini series into the A3 line which is really sad unfortunately in the stores theres always the anti thief thing on the back which prevents to get true feeling of the normal S7. i need to test if a S7 would somehow be operational with one hand for me. but i dont think so. :/
the display of my z3c is peeling of on the top left edge which was the reason iw as looking for a different phone. i need to repair this. sony would need to much time for this.
Click to expand...
Click to collapse
The S7 mini would be perfect, but it will never be created. The S7 is about the same size as the iPhone 6, so if any of your friends have one, just try using it and you'll quickly realize how much harder it is to reach the top of the phone with your thumb. I'm sticking with my Z3C for another year to see if anyone (not just Sony) releases a 4.5-4.7" flagship device. The XC just doesn't meet my expectations for an "upgrade".
Phone Arena review:
http://www.phonearena.com/reviews/Sony-Xperia-X-Compact-Review_id4256
The AndroidCentral Review is up, one note the lack of a fingerprint scanner is US only, the rest of the world has the fingerprint scanner available!
http://m.androidcentral.com/sony-xperia-x-compact
All of these first reviews to be released seem to be very shallow in depth. They don't go into any real analysis of the phone and use very general statements to describe the user experience. In fact, these read more like unboxings than actual reviews. There's a lot of talk about what the phone looks like, the specs it comes with, and way too much of it sounds like they're reading a press release. If I was in the market for a new device. I'd wait another month for real reviews to be released.
Android Authority review:
https://www.youtube.com/watch?v=uullDQFq5W0
I sure do not have those build quality issues. gaps?! display is dead flush, heck everything is. I am very impressed with the build quality, very sturdy. I do not have trouble with coming in from the right and typing 'p' either, but if you display is not flush it would probably influence it. I am more than sure you were unlucky and got a bad apple (heh). as for the key vibration issue; if you type faster than the vibration delay is set, you are of cause going to have it vibrate all the time while typing, odd btw that you guys was set to 60ms mine was set to 25ms as default.
Hey everyone, just wanted some feedback regarding an issue I began having this week with my X Compact.
Issue: The phone is not as responsive during the unlocking process as it once was. I used to simply swipe to unlock and the phone would immediately unlock with a simple swiping motion. Now, the phone requires a harder swipe before it unlocks.
Any ideas?