Not booting up - again - Honor 7 Q&A, Help & Troubleshooting

Hello.
I updated my phone from Android 5.0 to 6.0 through the EMUI update. It downloaded succesfully, and when I pressed install, it went into TWRP recovery and started installing it. It had some unknown command-errors, but after a while the installing was ready and the phone turned off automatically.
Now, when I try to turn my phone on, it doesn't do anything. I holded down the power on button for about 15 seconds, and it vibrated but nothing happened.
Any solution for this, please?

Jonni1 said:
Hello.
I updated my phone from Android 5.0 to 6.0 through the EMUI update. It downloaded succesfully, and when I pressed install, it went into TWRP recovery and started installing it. It had some unknown command-errors, but after a while the installing was ready and the phone turned off automatically.
Now, when I try to turn my phone on, it doesn't do anything. I holded down the power on button for about 15 seconds, and it vibrated but nothing happened.
Any solution for this, please?
Click to expand...
Click to collapse
I don't think you can make an official update with TWRP :\ If you want to update your device with the official built-in updater, you must get rid of TWRP and install back the EMUI recovery. Try flashing an official Firmware with Huawei extractor + adb flash. You czn find a lot of people talking about it around here.

Sideness said:
I don't think you can make an official update with TWRP :\ If you want to update your device with the official built-in updater, you must get rid of TWRP and install back the EMUI recovery. Try flashing an official Firmware with Huawei extractor + adb flash. You czn find a lot of people talking about it around here.
Click to expand...
Click to collapse
Okay, found Honor 7 firmwares here http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
Should I install the 5.0 firmware, the rollback from 6.0 to 5.0 firmware, or the 6.0 firmware?

Jonni1 said:
Okay, found Honor 7 firmwares here http://forum.xda-developers.com/honor-7/general/plk-l01-firmwares-updates-official-beta-t3272205
Should I install the 5.0 firmware, the rollback from 6.0 to 5.0 firmware, or the 6.0 firmware?
Click to expand...
Click to collapse
Well, there's no way to know if your firmware flash was successful or not. I suggest you try with 5.0, if it doesn't work try 6.0. You can try downgrade package in last resort.

The computer is not detecting the phone with adb. adb devices = nothing. I have the correct drivers.

I think the problem might be that USB debugging is turned off in my phone...anyway to flash a firmware now?

Can anyone help me? I only need the answer if it is fixable or not..

same problem help

Okay, I tried to flash a firmware trough the sd card with the dload...nothing happens...
Is my device fully bricked...?

Oh, now I get it. I need to flash an .IMG file. But can I do that with USB debugging disabled..?
Can ANYONE help me? I am really, really sad if my phone is unusable..

Jonni1 said:
Oh, now I get it. I need to flash an .IMG file. But can I do that with USB debugging disabled..?
Can ANYONE help me? I am really, really sad if my phone is unusable..
Click to expand...
Click to collapse
Flash it in bootloader. No need USB debugging on.
Sent from PLK-TL01H

Lucki_X said:
Flash it in bootloader. No need USB debugging on.
Sent from PLK-TL01H
Click to expand...
Click to collapse
How do I do that or can I even do that when the phone is only black...?

Jonni1 said:
How do I do that or can I even do that when the phone is only black...?
Click to expand...
Click to collapse
Phone must be connected to PC, reboot with push and keep power button + volume down. You must be unlocked to flash via fastboot.
Sent from PLK-TL01H

Lucki_X said:
Phone must be connected to PC, reboot with push and keep power button + volume down. You must be unlocked to flash via fastboot.
Sent from PLK-TL01H
Click to expand...
Click to collapse
Nope. Fastboot is not detecting the phone.

Jonni1 said:
Nope. Fastboot is not detecting the phone.
Click to expand...
Click to collapse
I suppose that you have the right drivers installed in your PC for Honor. I'm sorry I can't provide more advice.
Sent from PLK-TL01H

Related

[Q] No (OS), USB is not working stuck in recovery

i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
wildestweasal said:
i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
Click to expand...
Click to collapse
The first thing we need to know is what OS is on the PC so you can get the right drivers. Do you have the SDK set up and workiing?
wildestweasal said:
i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
Click to expand...
Click to collapse
The experimental twrp doesn't work for me for adb. If that's what you're running, you can try rebooting to the bootloader and flashing the last official twrp to see if that works.
crpalmer said:
The experimental twrp doesn't work for me for adb. If that's what you're running, you can try rebooting to the bootloader and flashing the last official twrp to see if that works.[/QUO
idk its the 2.6.3 version. But fastboot doesnt even respond i think my usb port when out but i ordered a replacement though got tired of messing with it thanks though
Click to expand...
Click to collapse
wildestweasal said:
crpalmer said:
The experimental twrp doesn't work for me for adb. If that's what you're running, you can try rebooting to the bootloader and flashing the last official twrp to see if that works.[/QUO
idk its the 2.6.3 version. But fastboot doesnt even respond i think my usb port when out but i ordered a replacement though got tired of messing with it thanks though
Click to expand...
Click to collapse
I am running same version, no issues. can your PC see the unit? Does the PC respond when the unit is connected when the Android system is booted up?
Click to expand...
Click to collapse
wildestweasal said:
i accidentally wiped everything via TWRP and now i am stuck in recovery with no os and no way to put a ROM on. I don't know if there is a wireless adb feature in recovery but i have had no luck (plenty of Googleing ) i at at my wits end at this point, any help would be greatly appreciated
Click to expand...
Click to collapse
If your not on Windows 7 your going to need it.
I am running same version, no issues. can your PC see the unit? Does the PC respond when the unit is connected when the Android system is booted up?[/QUOTE]
............no it has no (OS)
wildestweasal said:
I am running same version, no issues. can your PC see the unit? Does the PC respond when the unit is connected when the Android system is booted up?
Click to expand...
Click to collapse
............no it has no (OS)[/QUOTE]
Does the PC respond when in fastboot? What OS is on the PC?
i have the same issue and my computer dosent respond when in fastboot or adb i have no os and im twrp 2.5 can anyone help...
demon28 said:
i have the same issue and my computer dosent respond when in fastboot or adb i have no os and im twrp 2.5 can anyone help...
Click to expand...
Click to collapse
Download pdanet it will re download adb
Sent from my HTC6435LVW using XDA Premium 4 mobile app

Urgent help needed: Sm-g360az bricked

Hello....i rooted my sm-g360az samsung phone and when i restarted the phone, it didn't boot up to the home screen. It shows the samsung logo and then becomes blank....i later on came to know on the internet that i hadnt enabled 'oem unlock' on 'developer options' before rooting. I sent the phone to samsung for repair and they sent it back to me today saying that the phone is beyond repair because it was rooted, though i hadnt mentioned to them that i had rooted the phone. How do i get my phone to work again? I need it very badly for work purposes. Can somebody help me with this....
You need to flash stock rom for your device via odin.
røbin said:
you need to flash stock rom for your device via odin.
Click to expand...
Click to collapse
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
alvcross said:
hello robin....thanks for the reply my brother.....can you help me with links of the firmware files for sm-g360az brother? I searched on the iternet, but im unable to find them for free....
Click to expand...
Click to collapse
It is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 Did you visited this page?
røbin said:
it is hard to find stock firmware for your device but check this linkhttp://www.easy-firmware.com/index.php?a=browse&b=category&id=3228 did you visited this page?
Click to expand...
Click to collapse
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
alvcross said:
yes my brother....i did visit that page before.....but it says that downloads are available only to paid users....
Click to expand...
Click to collapse
https://samsung-firmware.org/model/SM-G361F/ both device have same spec.So you can try this version.
røbin said:
https://samsung-firmware.org/model/sm-g361f/ both device have same spec.so you can try this version.
Click to expand...
Click to collapse
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
alvcross said:
ohhh wooowww....thank you soo soo soo very much my brother.....but will this cause any problems to the sm-g360az phone?
Click to expand...
Click to collapse
Can't 100% guarantee you that it will work or not.Both device have same spec so it should work but one have 2mp font camera and other have 1.9mp camera. It shouldn't be a big problem I think.
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
alvcross said:
And can you also tell me weather you were taking about sm-g361f or sm-g360f brother? Can you mention the exact model number I should try flashing with? THERE ARE MANY MODELS IN SM-G360....WHICH ONE WOULD SUIT THE BEST BROTHER?
Click to expand...
Click to collapse
All the version are same.Those files are from different region. So you can choose any region.but download lte version only.
røbin said:
all the version are same.those files are from different region. So you can choose any region.but download lte version only.
Click to expand...
Click to collapse
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
alvcross said:
ohhh....wowwww....okay my brother....ill download the firmware...flash the files and let you know....thank you so very much for the help my brother....god bless you....
Click to expand...
Click to collapse
Don't just say thanks.Hit the thanks button If you thik I helped you
røbin said:
don't just say thanks.hit the thanks button if you thik i helped you
Click to expand...
Click to collapse
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
alvcross said:
yes my brother....i did just that....i downloaded the firmware files and tried to flash with odin....but the flash doesnt proceed....it gets stuck in initialization cause of the locked bootloader....i hadnt enabled 'oem unlock' when the phone was working....and also in the download mode it shows 'secureboot - enabled'.....so the locked bootloader is not allowing odin to flash.....the phone is being recognized by adb and it shows up with a serial number as recovery in the adb console....is there any way i could enable oem unlock and unlock the bootloader through adb commands?
Click to expand...
Click to collapse
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Røbin said:
You need to install twrp via odin and from twrp you need to do a full factory reset(data,cache,delvik,phone memory).after that try again to flash stock rom via odin.Here is the twrp link for your device http://teamw.in/devices/samsunggalaxycoreprimequalcomm.html
Click to expand...
Click to collapse
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
alvcross said:
Oh my god.....wonder of wonders my brother.....i downloaded TWRP from the link you gave me and flashed it with odin and to my surprise the phone booted up to the home screen after flashing was done.....the phone is back and working now.....wooowwwww.....thank you soooo soooo soooo very much my brother.....this forum needs many good hearted and wonderful people like you....Words cant express how happy I am.....thank you....thank you....thank you my brother....:victory:
Click to expand...
Click to collapse
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Røbin said:
I'm also very happy that I helped you and Now you get your bricked phone back to normal.
Click to expand...
Click to collapse
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
alvcross said:
but there is still some problem brother.....after flashing twrp 3 with odin the phone booted up to the home screen anad all my apps and settings were intact....but when i restarted the phone again....it showed the boot screen and then went blank.....i reflashed the twrp with odin again and it booted up to the home screen.....this time I MADE A FACTORY RESET AND AGAIN THERE WAS THE SAME PROBLEM.....PHONE WAS NOT BOOTING UP TO THE HOME SCREEN.....I REFLASHED TWRP AGAIN....BOOTED UP TO HOME SCREEN AND TRIED SOFTWARE UPDATES....BUT I GOT A MESSAGE SAYING THAT THE PHONE WAS MODIFIED IN AN UNAUTHORIZED WAY AND THAT I COULD TRY USING KIES FOR UPDATES.....
THE BOOTLOADER SEEMS TO BE DAMAGED.....CAN YOU TELL ME HOW TO UNLOCK THE BOOTLOADER WITH ADB BROTHER? WHEN I TYPE REBOOT RECOVERY THROUGH ADB, THE PHONE REBOOTS AND WHEN IT COMES TO THE TWRP RECOVERY SCREEN, IT TURNS BLANK....SO IM UNABLE TO GO INTO TWRP TO WIPE SOME STUFF AS YOU HAD SUGGESTED EARLIER....SHOULD I TRY CWM?
Click to expand...
Click to collapse
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Røbin said:
If locked bootloader causing this problem than you might want to try this http://unlock-bootloader.net/how-to/unlock-bootloader-samsung-galaxy-core-prime/ Follow the guide and unlock bootloader to see if this problem solve for good.
There is Android Marshmallow custom rom for your device too
Click to expand...
Click to collapse
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
alvcross said:
thanks for the link brother.....but that website is a fake website with fake android 6 custom rom links....
brother....do you have a SM-G360AZ MOBILE? CAN YOU INSTALL FLASHIFY ON YOUR PHONE AND TAKE A BACKUP IMAGE OF THE STOCK RECOVERY AND UPLOAD A LINK HERE....
TWRP IS NOT WORKING....THE PHONE REACHES RECOVERY AND THEN TURNS BLANK....
Click to expand...
Click to collapse
Why do you need stock recovery?There's no stock recovery available for your device.Try to instell different twrp version for your phone.

Got my KIW-L21 softbricked

Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...-unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
MrKnight230 said:
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
Click to expand...
Click to collapse
No problem mate, Community is Here to help!
The matter is, ROMs built after 18/8/2016 requires that you upgrade to Marshmallow stock ROM that means EMUI 4.0.
then you can flash the custom ROMs without problems.
If you're on bootloop, can you boot to fastboot or TWRP manually?
MrKnight230 said:
Hi,
so, I got my Honor 5x rooted and CM 13 installed a few months ago from this thread: http://forum.xda-developers.com/hon...unofficial-cyanogenmod-13-0-nightly-t3344499.
Last week or so some apps just didn't exist any more on my phone. Also I wasn't able to download any kinds of things, like apps, documents, pictures or whatever. After some time I figured out, that it was because of my SD-card being dead. When I removed it, all was fine again.
Another problem, that I got from the beginnning of having this ROM installed, I wasn't able to do updates, still don't know why exactly.
So I decided to wipe my phone and reinstall a newer version of CM in hope, that all would be fine again.
After performing backups and so on, I downloaded the latest build of CM from the official website (the one from 1st october) and GApps with ARM64, pushed it on my device and tried to install it with TWRP 3.0.2. I did a full wipe before, also deleting internal storage and System.
Error 7 occured and after some Internet research I read about this "assert" line. Figured out, that I got 2 oft them in this file and deleted the second telling something about the TB number, because it was also named in the error of TWRP.
Then pushed it on the device again and tried to install it. There was no error while installing, but after optimizing the apps, I got bootloops. Tried flashing other ROMs, including the one I got two days before, but it still got the same problem.
Also this huawei eRecovery thingy couldn't help me.
Now I don't know how to get an OS on my phone again, it would be very nice if someone could help me.
I also don't know whether there is a thread, that already deals with this topic, but I didn't know how to search for this.
If there is anything left unclear I'm very sorry, it's my first time posting, please excuse.
Thank you!
Click to expand...
Click to collapse
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
mumith3 said:
No problem mate, Community is Here to help!
The matter is, ROMs built after 18/8/2016 requires that you upgrade to Marshmallow stock ROM that means EMUI 4.0.
then you can flash the custom ROMs without problems.
If you're on bootloop, can you boot to fastboot or TWRP manually?
Click to expand...
Click to collapse
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
MrKnight230 said:
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
Click to expand...
Click to collapse
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
MrKnight230 said:
Thanks for the fast reply!
Just got a softbrick, can still enter fastboot and so on.
I already found a stock version, but didn't know how to install it 'cause it wasn't a zip... :3
Click to expand...
Click to collapse
Is it an update.app file?
Then you have to force update. Refer to @clsA 's thread.
Cheers.
clsA said:
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
Click to expand...
Click to collapse
mumith3 said:
Is it an update.app file?
Then you have to force update. Refer to @clsA 's thread.
Cheers.
Click to expand...
Click to collapse
muradulislam said:
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Got it from this page for KIW-L21: stech guide.com/honor-5x-stock-marshmallow-firmware/ (I'm not allowed to post links yet because I'm new.. You just need to delete the space, should work then)
Sadly I got the file deleted and have to download it again, but right now my Internet is slow af.. Gonna need at least 5 hours to go...
MrKnight230 said:
Got it from this page for KIW-L21: stech guide.com/honor-5x-stock-marshmallow-firmware/ (I'm not allowed to post links yet because I'm new.. You just need to delete the space, should work then)
Sadly I got the file deleted and have to download it again, but right now my Internet is slow af.. Gonna need at least 5 hours to go...
Click to expand...
Click to collapse
Well, Wait, Honor 5x has many variants. So download only your device variant
Search this thread >>> http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
Hope it helps.:highfive:
Cheers! :good:
mumith3 said:
Well, Wait, Honor 5x has many variants. So download only your device variant
Search this thread >>> http://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
Hope it helps.:highfive:
Cheers! :good:
Click to expand...
Click to collapse
got the right one now, download worked faster than expected.
Is there any possibility to install the dload file without using a sd-card?
MrKnight230 said:
got the right one now, download worked faster than expected.
Is there any possibility to install the dload file without using a sd-card?
Click to expand...
Click to collapse
No mate, You'll need a SD card.!!!
mumith3 said:
No mate, You'll need a SD card.!!!
Click to expand...
Click to collapse
clsA said:
What file did you get (link) ?
theirs no need to use the HuaweiUpdateExtractor, unless you need the stock recovery from it.
all you need is Stock recovery (installed) and the Update.app for your current version
Update.app goes in a folder named dload on the sdcard, now simply shut the phone off and restart it while holding power + volup + voldown
after 5 seconds let go of the power button and continuing holding the vol buttons till you see the update begin (around 25 seconds)
Click to expand...
Click to collapse
muradulislam said:
Try to get back to stock firmware, to do that download the latest firmware, extract to get dload folder containing UPDATE.APP, use Huawei update extractor to extract recovery, Cust, boot and system images.
Flash them to your phone using fastboot, put dload folder in the root of an SD, insert it in your phone and press and hold vol up + vol down + power until the phone boots up to force an update.
Have you already tried this? If not, do this please.
If yes, please elaborate "erecovery could not help me*...
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Phone works again now! I love all of you!!!
MrKnight230 said:
Phone works again now! I love all of you!!!
Click to expand...
Click to collapse
Enjoy and do come back
Just kidding...
Sent from my PLK-L01 using XDA Labs

[ROOT][HOW TO] Going from Stock Lollipop to marshmallow official and root it!!!

I see there are some people wondering how to get the marshmallow update from lollipop
I was on stock lollipop rooted and running xposed, everything was perfect, in order to get marshmallow update and root it I did this
Flashed stock rom using the repair rom found here in xda using sp flash tool www.sw-condor.com/smartphones/A55 slim.html
Once in stock, I updated OTA to marshmallow
Once in marshmallow I flashed only the recovery using the same scatter file from the repair rom and the custom twrp for blu vivo 5
Immediately after flashing twrp, booted recovery (power + vol+, once it vibrates al blu logo appears, release power)
Flashed (latest SuperSu)
Enjoy
Screenshots
Screenshots attached.
Thank you for this.
I have already updated to marshmallow but need to root it. The repair rom link isn't working, I need the scatter file to flash recovery. Got another link?
UPDATE - found an mt6573 scatter file, so that's not an issue, but I can not get SP Tools to flash, it basically sits there and does nothing, then I get an error "can not pass bootrom start command". Any chance of a detailed tutorial with pictures or video?
Thanks,
krodiak said:
I see there are some people wondering how to get the marshmallow update from lollipop
I was on stock lollipop rooted and running xposed, everything was perfect, in order to get marshmallow update and root it I did this
Flashed stock rom using the repair rom found here in xda using sp flash tool www.sw-condor.com/smartphones/A55 slim.html
Once in stock, I updated OTA to marshmallow
Once in marshmallow I flashed only the recovery using the same scatter file from the repair rom and the custom twrp for blu vivo 5
Immediatly after flashing twrp, booted recovery (power + vol+, once it vibrates al blu logo appears, release power)
Flashed (latest SuperSu)
Enjoy
Click to expand...
Click to collapse
MikeRogers said:
Thank you for this.
I have already updated to marshmallow but need to root it. The repair rom link isn't working, I need the scatter file to flash recovery. Got another link?
UPDATE - found an mt6573 scatter file, so that's not an issue, but I can not get SP Tools to flash, it basically sits there and does nothing, then I get an error "can not pass bootrom start command". Any chance of a detailed tutorial with pictures or video?
Thanks,
Click to expand...
Click to collapse
Make sure you have the USB (?) Drivers
Sent from my VIVO 5 using XDA Free mobile app
USB Drivers
MikeRogers said:
Thank you for this.
I have already updated to marshmallow but need to root it. The repair rom link isn't working, I need the scatter file to flash recovery. Got another link?
UPDATE - found an mt6573 scatter file, so that's not an issue, but I can not get SP Tools to flash, it basically sits there and does nothing, then I get an error "can not pass bootrom start command". Any chance of a detailed tutorial with pictures or video?
Thanks,
Click to expand...
Click to collapse
There's 2 possibilities:
The easy one:
If you have the proper drivers, power off the device, wait 10 seconds or so. Then click download in the sp flash tool and then connect the phone, the tricky part is that YOU NEED TO PUSH VOL+ OR VOL- in order to sp flash tool to recognize the phone and start flashing
The not so easy:
You don't have the proper drivers:
I had to install manually a driver, device manager->Select the first item (the name of your computer)-> Action -> Add legacy hardware
You need to download the drivers and then tell the device manager to look for drivers in the specific folder where you downloaded them, then it will find a device, I don't remember its name, follow this guide
Don't forget to hit thanks if I helped :highfive:
Ok, got this working finally. As for the initial issue with SP flash not working, I'm not sure what it was. I have the drivers and everything, but I rebooted the computer/phone (then turned it off) and then it started working. I did also press the volume button when it was off, that may have helped as I didn't know to do that before.
Next, the scatter file I found on the internet somewhere else wasn't correct. I found the correct link to the recovery ROM (you may want to update it in your initial post): http://www.mediafire.com/download/p29wpz59wg9ob2b/BLU_V0050UU_V09_REPAIR.zip
Other than that your guide worked perfectly, thank you.
Updated OP
MikeRogers said:
Ok, got this working finally. As for the initial issue with SP flash not working, I'm not sure what it was. I have the drivers and everything, but I rebooted the computer/phone (then turned it off) and then it started working. I did also press the volume button when it was off, that may have helped as I didn't know to do that before.
Next, the scatter file I found on the internet somewhere else wasn't correct. I found the correct link to the recovery ROM (you may want to update it in your initial post): http://www.mediafire.com/download/p29wpz59wg9ob2b/BLU_V0050UU_V09_REPAIR.zip
Other than that your guide worked perfectly, thank you.
Click to expand...
Click to collapse
Thanks, I updated the OP, it seems the I copied the shortened text instead of the full link, thanks for noticing that.
Is anyone else having terrible battery life on this after upgrading to Marshmallow?
After doing the update to Marshmallow in this thread, I flashed TWRP and rooted via this thread.
Now my battery life has been absolutely terrible. Before updating to Marshmallow, I could go almost all day, have 35%+ left at night, goto sleep and then wake up with around 20% of battery all the time. Now if I goto sleep with 50% battery it's dead when I wake up. Seems to be "Wlan" and "Phone Idle" using most of the battery as you can see in the screenshot below. Also, after the phone dies and I plug it back in, it always shows as 13-15% battery life right away (odd), so I used a battery calibration app that seemed to do nothing and still same bad battery.
I'm thinking it may be due to me missing the OTA update right before the Marshmallow OTA update. I know it had to do with the radio, could that be it? Does anyone have that in a zip file I could flash via TWRP? If so, would it be ok to do that?
Any ideas would be appreciated, here's a screenshot of battery usage:
xposed
MikeRogers said:
Is anyone else having terrible battery life on this after upgrading to Marshmallow?
After doing the update to Marshmallow in this thread, I flashed TWRP and rooted via this thread.
Now my battery life has been absolutely terrible. Before updating to Marshmallow, I could go almost all day, have 35%+ left at night, goto sleep and then wake up with around 20% of battery all the time. Now if I goto sleep with 50% battery it's dead when I wake up. Seems to be "Wlan" and "Phone Idle" using most of the battery as you can see in the screenshot below. Also, after the phone dies and I plug it back in, it always shows as 13-15% battery life right away (odd), so I used a battery calibration app that seemed to do nothing and still same bad battery.
I'm thinking it may be due to me missing the OTA update right before the Marshmallow OTA update. I know it had to do with the radio, could that be it? Does anyone have that in a zip file I could flash via TWRP? If so, would it be ok to do that?
Any ideas would be appreciated, here's a screenshot of battery usage:
Click to expand...
Click to collapse
Battery life is great on mine, I installed xposed and amplify to block some wakelocks, but even before that, I had a very decent battery life, I read somewhere that you need to let your phone to completeley discharge, not even having enough juice to try to boot when the power button is pressed.
Once is completely dead, charge your phone (keeping the phone off) until it is fully charged.
krodiak said:
I see there are some people wondering how to get the marshmallow updat...
Click to expand...
Click to collapse
give credit to Syed Ahmed Ali Shah for recovery please ...
I have android 6.0 official and i want root my blu vivo 5. Here root 5.1... How to root in 6.0.1?
marko717 said:
I have android 6.0 official and i want root my blu vivo 5. Here root 5.1... How to root in 6.0.1?
Click to expand...
Click to collapse
The OP explains exactly how to do this.
MikeRogers said:
The OP explains exactly how to do this.
Click to expand...
Click to collapse
The instructions are same that original post? I have 6.0.1 now.
marko717 said:
The instructions are same that original post? I have 6.0.1 now.
Click to expand...
Click to collapse
You could probably try just doing steps 3 through 5. I'm no expert but I think it might work.
MikeRogers said:
You could probably try just doing steps 3 through 5. I'm no expert but I think it might work.
Click to expand...
Click to collapse
Im begginer and i wont to do a mistake. I want to know if this work with 6.0.1 or if this is pass 5.1 to 6.0.1
marko717 said:
Im begginer and i wont to do a mistake. I want to know if this work with 6.0.1 or if this is pass 5.1 to 6.0.1
Click to expand...
Click to collapse
The OP is for rooting Marshmallow so I would imagine it would be fine with 6.0.1 as that's still Marshmallow. You would only be flashing recovery (TWRP) if you don't have it already and then using that to flash SuperSU. Nothing very dangerous. Give it a try and let us know.
I think this is for lollypop and have an upgrade to marshmallow. It is not for root 6.0 directly. I would not want to use this .. kingoroot .. kingroot .. 360 .. none worked for me. I only have this method and never did a flash, recovery or a twrp
marko717 said:
I think this is for lollypop and have an upgrade to marshmallow. It is not for root 6.0 directly. I would not want to use this .. kingoroot .. kingroot .. 360 .. none worked for me. I only have this method and never did a flash, recovery or a twrp
Click to expand...
Click to collapse
Nope, read the OP. It's clearly flashing TWRP and SuperSU "AFTER" doing an OTA update to Marshmallow. I have personally done this to my Blu Vivo 5 running the initial Marshmallow update and it works fine.
MikeRogers said:
Nope, read the OP. It's clearly flashing TWRP and SuperSU "AFTER" doing an OTA update to Marshmallow. I have personally done this to my Blu Vivo 5 running the initial Marshmallow update and it works fine.
Click to expand...
Click to collapse
I will do all steps then
marko717 said:
I will do all steps then
Click to expand...
Click to collapse
You will not need to do step 1 or step 2 since you already have Marshmallow.

[RESOLVED] SAMSUNG J600GDXUACUH1 BOOTLOOP. NEED HELP

I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
MnTri said:
I posted my rooted J6 last year: https://forum.xda-developers.com/t/...-updated-magisk-and-now-got-bootloop.4464235/
And I left it untouched for months now, but I still want to save it
I can only go to the recovery mode (I didn't install TWRP before rooting my phone ( That was a lesson for me)
I wanted to reflash the stock ROM (already had it) but my laptop & ADB didn't detect my phone since I wiped everything on the phone, even the ROM.
Can anyone please help me?
Click to expand...
Click to collapse
You're using Windows?
ethical_haquer said:
You're using Windows?
Click to expand...
Click to collapse
Yep. Windows 10
MnTri said:
Yep. Windows 10
Click to expand...
Click to collapse
If you have access to a Linux computer let me know, otherwise, I will try and fix it with you on Windows.
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
MnTri said:
Well I only use Windows and I'm at school for now. I did have a Kali Linux on USB though
Click to expand...
Click to collapse
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
ACCIDENTAL
ethical_haquer said:
First, download the latest Samsung drivers from developer.samsung.com and install them.
Let me know if you need help with this step.
Click to expand...
Click to collapse
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
MnTri said:
I downloaded samsung drivers and odin on my laptop already. So it could recognize my phone & i could root my phone at first
Click to expand...
Click to collapse
MnTri said:
I can only go to the recovery mode
Click to expand...
Click to collapse
You still have a recovery, is it stock or custom?
Stock
ethical_haquer said:
You still have a recovery, is it stock or custom?
Click to expand...
Click to collapse
MnTri said:
Stock
Click to expand...
Click to collapse
But you still can't connect your phone to your computer?
UPDATING MY PHONE (27TH.3.2023)
So basically I bought the new cable to connect it to computer, and it seems to work now [I knew it because I heard the Windows connecting sound]. But it wouldn't show Samsung J6 folder on computer for now. And I'm in the situation that when I pressed wipe cache partition in the recovery mode it would show:
E:[PDP] lstat /c____/pdp_b__ : 0 - No PDP scenario​I haven't tried going to the safe mode, but with the fact that I'm still stuck at the recovery mode right now (or reboot again and get bootloop) and it seems no one has the answer to the No PDP scenario right now, I don't really know what to do next
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
MnTri said:
UPDATE AGAIN, IT'S ALL GOOD NOW (29TH.3.2023)
With my new cable, I just need to connect my phone to PC, open Odin again and flash ROM, that's it. My phone now is not rooted anymore but I don't think I want to root ever again. Still can't understand how I literally just updated Magisk and restarted my phone and...BOOM, got boot loop.
Click to expand...
Click to collapse
Nice! If this thread is done, put "[RESOLVED]" in the title. That way people will click on on it to get help, not help you.

Categories

Resources