This is what happened:
I decided to upgrade my consumer cellular 4.3 android to marshmallow using the instructions i found here: http://techxat.com/install-cm13-nightly-6-0-marshmallow-on-huawei-ascend-mate-2/
The instructions said the upgrade was compatible with all HAM2 devices so I thought that might mean I could bypass that conversion from CC to OEM (http://forum.xda-developers.com/ascend-mate2/general/guide-cc-variant-to-oem-convertion-t3149767)
So I followed the instructions in the first link and made a big mistake by wiping the device using TWRP before performing the rest of the steps. It was a little unclear. Anyways, that option erased the OS and I could not get back into TWRP. Only cyanogenmod 13, or the device's stock recovery loader would boot.
So, I thought it's okay, ill just do the CC to OEM conversion, and then start over from there. But I can't install the OEM software based on the instructions in the second link.
I think my main problem is getting TWRP reinstalled on the device. when I use the "fastboot flash recovery twrp.img" command, it gives me that "error: cannot open twrp.img" . I checked the file extension to make sure it was not hiding an extra .img, and i confirmed my device shows up through the command "fastboot devices".
so I'm stuck with cyanogenmod. I tried to install oem.zip using cyanogenmod, but it keeps on failing. I tried two microSD cards with the same result.
what's my next step??
btw, yes, my phone is rooted.
anyone?
Have you followed this thread? As long as you can get to fastboot or recovery you can recover, it just takes time and patience
http://forum.xda-developers.com/asc...to-fix-soft-bricked-phone-using-twrp-t2886630
Excellent, thanks for the link. I have successfully flashed to the oem version. I was making some dumb mistakes that kept causing the operation to fail. now im gonna attempt the marshmallow conversion. fingers crossed...
more problems. i wiped the phone as per instructions then went to select to rom from the internal storage and i got an error. then i had to go back and reinstall twrp, and loaded the rom on an external sd card and i get the same error
what am i doing wrong??
Remember the newer roms must have the 322 bootloader and a latest version of TWRP. My recommendation load the factory 322 rom run it for a few and see how you like it. I find battery life better and the ability to use sdcard for internal memory a sweet combo. I have used many custom roms but they kill battery a little quicker, I like having a phone last for two days with moderate usage, and found emui allows lots of tweeking.
oncouch1 said:
Remember the newer roms must have the 322 bootloader and a latest version of TWRP. My recommendation load the factory 322 rom run it for a few and see how you like it. I find battery life better and the ability to use sdcard for internal memory a sweet combo. I have used many custom roms but they kill battery a little quicker, I like having a phone last for two days with moderate usage, and found emui allows lots of tweeking.
Click to expand...
Click to collapse
thanks for the reply. you are right, after i posted i realized i needed to upgrade to 322 first, which i did, and like you said im just going to test this out and probably wont bother going with marshmallow since this OS seems to be running smooth. One question though: i backed up my contacts using hisuite before flashing the phone, but now hisuite does not recognize the phone with the new OS. what do you suggest i do to get my contacts loaded?
update: i got hisuite working. I had to enable usb debugging mode and disable the "allow hisuite to use hdb" option.
Cool don't forget to get the latest hisuite. I downloaded like 5 gigs of themes for emui. One ting I never knew was .hwt huawei theme files are just renamed zip files.
Related
Ive posted once already, and even sent a message to someone on the site who's been around longer....here's my problem....
1. I have AT&T
Here is what my bootloader says.....
Software status: Official
unlocked
s-off
CID-1111111
I bootload hbooted FW 3.28.XXX.6 when it came out (ive done it twice now)
I do not have the complete android sdk package, all I have is hasoon's all in one toolkit
im on Captain Throwback's Multirom Recovery ( latest) ( I was using his latest standard recovery, but switched to his MB one a few moments ago)
Here's my problem.......I downloaded both the latest MaximusHD OTA update as well as the MaximusHD rom. I then booted into recovery, and could not wipe anything (all i got were red error messages while trying to do the wipe's)....ive seen this before, so while still in recovery, I dirty flashed MaximusHD rom, but before It completed in Aroma the device automatically rebooted to where it was stuck on the white HTC screen. Now going back to Hasoon's AIOT.....Im able to use fastboot on my computer, the bootloader is reading fastboot usb, and my computer is able to recognize my phone; however, as I said earlier i do not have the complete android sdk.......
main problem: I can not use my phone, as recovery continuously reboots before finishing the wipe process and screen get's stuck on HTC white screen....i have no idea what to do now
OK, no one is helping....ive tried some things, learned a few but this seems to be over my head....can anyone really help ? I managed to get past the white HTC screen by fastboot flashing a new recovery (philz then dees troy version of twrp)....I got a bootable commotio build....I also flashbooted 2.22.401.5, i thought it had fixed everything but in recovery i am getting the following errors.....
unable to mount /cache
failed to wipe dalvik
did I somehow mess up my partitions ? I need to wipe dalvik cache and cache in order to get a working rom on this damn phone.....
The issue has been fixed....
jxcorex28 said:
The issue has been fixed....
Click to expand...
Click to collapse
Please post the solution (for possible info for others) and mark the thread title [SOLVED].
In any case, glad you sorted it out. I would have tried to help, but I'm usually not on XDA on the weekends.
Couple things:
Sounds like you got some kind of adb environment running on your own. But this is one of the reasons I advise against toolkits. They put you in the position to screw up your phone; but don't arm you with the proper tools and knowledge to get out of those jams.
Also, I don't recommend international firmware (3.28) if you are using AT&T as your carrier. You'll likely encounter some reception issues, as the AT&T band support is built into the radio firmware. Although since you are already there, I'd be curious to hear your experience on the 3.28 firmware.
redpoint73 said:
Please post the solution (for possible info for others) and mark the thread title [SOLVED].
In any case, glad you sorted it out. I would have tried to help, but I'm usually not on XDA on the weekends.
Couple things:
Sounds like you got some kind of adb environment running on your own. But this is one of the reasons I advise against toolkits. They put you in the position to screw up your phone; but don't arm you with the proper tools and knowledge to get out of those jams.
Also, I don't recommend international firmware (3.28) if you are using AT&T as your carrier. You'll likely encounter some reception issues, as the AT&T band support is built into the radio firmware. Although since you are already there, I'd be curious to hear your experience on the 3.28 firmware.
Click to expand...
Click to collapse
Im not exactly sure what went wrong in the first place. I never pulled a logcat (from an app or through adp) since the problem no longer exists it looks like I never will unless I go through another similar thing. I wish I did know because it's killing me to know. I wasnt on 3.28 for long maybe a few days, but for the times I was
a. the reception in tuscaloosa, alabama where we have 4G LTE everywhere gave me a decent signal
b. I didnt notice a battery drain compared from other firmware bands
I have flashed atleast 500 times over a 8 year period on 4 different android phones, and Ive never once experienced the problem I had 2 days ago. Ive had 2 HTC phones, although, the experience with basebands were similar they were actually very different in every aspect. I had a TMO HTC G1 back in the day ( I had to learn how to do everything back when scripts or programs werent doing the grunt work (root)...
I had a TWRP backup of beanstalk saved (so kiddies, do your backups) that is what saved my ass. I couldnt wipe anything and my internal storage had been wiped and TWRP wasnt recognizing my SDcard. Everything that could go wrong went wrong....I flashed 3.28 (twice), went through 3 different recoveries (Captain Throwback's Multiboot Recovery, Captain Throwback's TWRP, and Philz Touch CWM Recovery). I looked all over for the answers, but none came to my rescue. It was ultimately finding that backup that saved me.....
I actually had to repartition my computer's hard-drive and reinstall windows 7 home edition, so I had to start over with practically everything...Im not going to use toolkits anymore. As you said earlier, it's just the easy way out. You wont learn anything about how to use ADB or Fastboot (although I applaud the one's who make the scripts or toolkits for those of us on the go).....
P.S.......If I can ever manage to break away from my dueling school schedule and my other priorities in life I plan on learning more about starting from the ground up and building roms, and not just throwing a few things together in the kitchen.....
While my mind is fresh, which linux distro would you recommend for a dual boot machine ? Im currently on windows 7 home edition
jxcorex28 said:
I wasnt on 3.28 for long maybe a few days, but for the times I was
a. the reception in tuscaloosa, alabama where we have 4G LTE everywhere gave me a decent signal
b. I didnt notice a battery drain compared from other firmware bands
Click to expand...
Click to collapse
Yeah, I'm going to pull back on my previous statement that "3.28 will likely cause reception issues on AT&T's network" to instead say "may cause issues". And feel free to try it at your own discretion.
Reason being, I've seen maybe 3 reports now of this firmware working ok on AT&T, and no reports to the contrary so far.
Although, when folks tried the 2.22.401 "international" firmware on AT&T, there were several (even numerous reports) of signal issues, even NO SIGNAL. No reports of this so far on 3.28, so I'll be cautiously optimistic for the time being (until I see reports otherwise). Haven't personally tried it, and not sure I will as I don't really have time ATM to mess around with the possibility of signal issues or no signal.
jxcorex28 said:
I couldnt wipe anything and my internal storage had been wiped and TWRP wasnt recognizing my SDcard. Everything that could go wrong went wrong....I flashed 3.28 (twice), went through 3 different recoveries (Captain Throwback's Multiboot Recovery, Captain Throwback's TWRP, and Philz Touch CWM Recovery). I looked all over for the answers, but none came to my rescue. It was ultimately finding that backup that saved me.....
Click to expand...
Click to collapse
Did you try fastboot erase cache before trying to re-install recovery, or a different recovery? I've seen this simple step alleviate some pretty drastic issues with recovery.
---------- Post added at 10:41 AM ---------- Previous post was at 10:38 AM ----------
jxcorex28 said:
While my mind is fresh, which linux distro would you recommend for a dual boot machine ? Im currently on windows 7 home edition
Click to expand...
Click to collapse
I can't speak personally, I'm not a Linux PC person. But my friends that are, seem to split among various distros: Ubuntu, Kubuntu, and Arch. One friend that is a particular Linux aficionado is on Arch, and said he was very happy with it.
I did...I also tried fastboot -w...to no avail...the past few days I've been learning more about adb and fastboot commands...
I've heard a majority of users tend to swing towards Ubuntu. I might take a look into it...
jxcorex28 said:
I did...I also tried fastboot -w...to no avail...the past few days I've been learning more about adb and fastboot commands...
I've heard a majority of users tend to swing towards Ubuntu. I might take a look into it...
Click to expand...
Click to collapse
Id highly rrecommend Linux Mint 17 Qiana MATE Edition .I use it with Windows 7. It is my favorite Linux OS. Not to mention that its perfect for Linux beginners.
That info would of been great a few days ago, but my laptop is screwed up now. Earlier I tried logging on,and couldn't because of some kind of remote error near the password field box on win7 HE...So I tried a system restore,and it failed so I f8 into recovery options and try using HP Recovery..everything went smooth into the first boot. I ended up getting a recovery installation incomplete and a 205 UIA failed 3 times. I believe my laptops recovery partition is corrupt,and I don't have a HP recovery disk, a win7 recovery DVD / Win7 recovery USB stick... I found what I need on HPs website, but its 30 bucks...BestBuy GS wants to charge me $69.99 for a diagnostics test and a retail version of win7 cost like 130
Its a 2011 HP Pavilion G-series laptop with windows 7 Home edition. What makes matters worse is I just partitioned the system a few weeks ago by using the recovery option HP makes for their devices...
Everything was great til about 10pm tonight...FML...now I actually gotta go to school to do my damn school work
jxcorex28 said:
Ive posted once already, and even sent a message to someone on the site who's been around longer....here's my problem....
1. I have AT&T
Here is what my bootloader says.....
Software status: Official
unlocked
s-off
CID-1111111
I bootload hbooted FW 3.28.XXX.6 when it came out (ive done it twice now)
I do not have the complete android sdk package, all I have is hasoon's all in one toolkit
im on Captain Throwback's Multirom Recovery ( latest) ( I was using his latest standard recovery, but switched to his MB one a few moments ago)
Here's my problem.......I downloaded both the latest MaximusHD OTA update as well as the MaximusHD rom. I then booted into recovery, and could not wipe anything (all i got were red error messages while trying to do the wipe's)....ive seen this before, so while still in recovery, I dirty flashed MaximusHD rom, but before It completed in Aroma the device automatically rebooted to where it was stuck on the white HTC screen. Now going back to Hasoon's AIOT.....Im able to use fastboot on my computer, the bootloader is reading fastboot usb, and my computer is able to recognize my phone; however, as I said earlier i do not have the complete android sdk.......
main problem: I can not use my phone, as recovery continuously reboots before finishing the wipe process and screen get's stuck on HTC white screen....i have no idea what to do now
Click to expand...
Click to collapse
I had that exact same issue yesterday... Twrp couldn't wipe anything and eventually kept rebooting after 20 or 30 sec in recovery.
I had to download the 1.58 RUU and run that, then flash Twrp back, reroot, then restore one of my backups from earlier in the day.
As far as fw goes, I had updated to 2.22.401.4, had that for a couple days, then updated to the 3.xx fw to install arhd 20.3. I liked it, but decided I love my dirty unicorns rom so decided to go back to the 2.xx fw. I tried to flash renovate 4.5.0, and that's when all the issues in twrp started. From what you're saying, it sounds like the issue could be caused from the fw updates.
How did you end up restoring your backup when they issue happened? I tried to restore mine with fastboot, but it was compressed and I couldn't extract the img files from the win files
I had a beanstalk twrp backup. I'm not 100% sure if I sent you my backup that It would work for you...where did you get the firmware you flashed ?
jxcorex28 said:
I had a beanstalk twrp backup. I'm not 100% sure if I sent you my backup that It would work for you...where did you get the firmware you flashed ?
Click to expand...
Click to collapse
I got it from skulldreamz thread on flashing fw by renaming it and putting it on root of ext SD card
Did you look into the contents of that zip to see if there was a recovery.img or boot.img file ? Those files usually overwrite the custom recovery (ie...TWRP or CWM). There are two ways to correct those red error messages you get in TWRP...
1. by flashing partition-fixer.zip (I have a copy if you need it)
2. By using a terminal emulator,and typing this command...
mke2fs /dev/block/mmcblk0p46
I believe this command is essentially what's included in the flashable partition fixer ( I haven't actually taken a look in that zip,so I could be wrong)...
I haven't had any problems as of late...either I'm starting to get back in the hang of dealing with HTC devices or I'm just lucky...
As stathis,skull, & sneaky pointed out...sometimes the firmware packages contain recovery.img/boot.img that will overwrite existing images. Its best to download whatever fw zip you want and scan these zips for said files. Its OK to delete those files,rezip em and flash. If you didn't remove these images. You would have to fastboot flash recovery name-of-recovery.img after flashing the fw zips
jxcorex28 said:
As stathis,skull, & sneaky pointed out...sometimes the firmware packages contain recovery.img/boot.img that will overwrite existing images. Its best to download whatever fw zip you want and scan these zips for said files. Its OK to delete those files,rezip em and flash. If you didn't remove these images. You would have to fastboot flash recovery name-of-recovery.img after flashing the fw zips
Click to expand...
Click to collapse
With the ones I got from skulldreamz' thread, I believe they were modified bc I didn't have to flash a custom recovery again after I flashed the fw. I never fastboot flashed them, I've always just renamed it 0P6BIMG.zip and put it on the root of the ext SD card
That's probably because skull removes those 2 files before uploading for download. I'm not sure if he does that for every zip....
I am rooted and S-Off. I am using the ViperOne custom ROM for my phone.
The end goal is for me to update my firmware, because my phone has an over 10 minutes boot time normally. (Not an exaggeration. I have actually timed it with a timer.) I read that in order to fix this, I should try to update the firmware by going to stock recovery and doing an OTA update.
My TWRP has worked flawlessly for me over the years, but for some reason it won't work anymore. It will hang on the boot screen for over an hour. After that hour, I assumed it's not slowly booting. (As a bit of background, recovery would boot quickly while my phone still had problems with 10 minute boot times).
Another piece of information is that the last time TWRP worked was when I used it to install .zip files from Titanium to get all my apps working. That worked perfectly fine, my apps got updated, and no trouble. I wish I could say what happened between then and now, but from what I can remember, I just used my phone normally, such as using web browsers and games. I don't remember messing with any system files.
I do know that ClockWorkMod recovery DOES work if I flash that, but my nandroids are all on TWRP. I have tried to flash different version of TWRP as well. It doesn't seem to matter which one I flash, my phone reacts exactly the same.
Another thing to note, I'm not sure if it's significant or not, is that when I got into hboot, I get the following message for a split second. I can't read the file names exactly, but I got the extensions. Then I get the normal screen with the vol instructions and choices to go to fastboot, recovery, etc... The message reads:
SD Checking...
Loading [(something).zip]
No Image!
Loading [(something).nbh]
No Image or wrong image!
Loading [(something).zip]
Loading [(something).nbh]
No Image or wrong image!
I hope this is a decent amount of information. I tried to include as much as I could, but if I'm missing any critical details, let me know and I will GREATLY appreciate your help!
have u tried to rewrite the image, download the new TWRP and load it via adb
Bradl79 said:
have u tried to rewrite the image, download the new TWRP and load it via adb
Click to expand...
Click to collapse
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Battletooth said:
Well, I did do that. I rewrote different versions of the image and none worked.
Sadly, my solution was to completely wipe my phone. More than the default factory reset.
I'm so it has been solved, but probably not in the most practical way for others with a similar problem.
Click to expand...
Click to collapse
Having the exact same issue. Attempted to install twrp-2.8.6.0-m8.img using adb, but TWRP never loads. I can load prior versions but same results. Going to HBOOT I get a bunch of messages related to 0P6BDIAG.zip, 0P6BIMG.zip
and some .nbh. I think it's looking on my SDCARD for those.
If you're looking to update your firmware, you can use an official RUU to change the firmware of your phone. You can read more about it in this stickied thread in the general forum to see if it fits your needs. If you decide to do this, your phone will be completely stock after the RUU finishes running so use fastboot to flash TWRP (or whichever recovery you prefer).
Regarding the messages you see in hboot, it will always check for those files if you have an external sdcard mounted. If they are present, you will be given the option to flash the update. If not, you will get regular hboot access after the check. It is completely normal and nothing to worry about.
tl;dr - Can't seem to find my way out of a software brick. Have sideloaded the stock OS from 1+ but still forever getting the spinning dots or fastboot screen, depending on which mode i boot into.
Hi all. Signed up to make this thread, but i've been lurking for years.
I have a OnePlus X that is about the least modded smartphone i've ever owned. I've never been pleased enough with a retail product that i didn't feel compelled to strip out the bloat and start over, until this phone. Other than stock, i've just got a gallery app, some apps for manipulating text files or compiling code, couple games, and social media apps.
Anyway, a few days ago i got a notification about a software update. Downloaded. Installed. Updated. No problem.
Maybe yesterday or the day before, it showed up again. This morning i downloaded, installed, and suddenly i have apps closing. It's been over 12 hours so i'm hazy on how it all started, but i was getting something like "package installer" errors when attempting to open some apps. Same deal when i went to adjust permissions of those affected apps. Every time i unfocused a box that had pulled up swype, i would get an error message saying swype crashed or closed or something.
So i started uninstalling third party apps (i don't keep many, and most i've had for years so i think they're probably trustworthy). Same deal. Started uninstalling updates to google apps. Same deal. Went to uninstall and reinstall some non stock apps that i'd kept previously. Nothing.
I went to cook breakfast while an app was reinstalling, and i came back to a red dot on my screen with two white dots chasing each other around it. From what i'm reading that's a sign of a bootloop or software brick. I've taken all steps i could find, including wiping cache and sideloading a fresh stock OS, but to no avail.
Is it that i've ruined my google apps somehow and need to restore them? How would i even go about figuring out what the problem is? Any advice or guidance is appreciated
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
"A09" said:
Hi,
As your device is in bootloop state, try flashing the stock rom. Make sure you wipe data and cache. As far as after update problems, i faced it few times. After updating many app crashed and phone hangs. So i prefer clean flash over dirty flashing, to make sure everything is hazel free. For the time being i upgraded from 3.1.2 to 3.1.3 without wiping data or cache and facing no problem( of course since it was an OTA). But sometimes situation comes when after update phone act weird, so tbe option which i prefer then is clean flashing the stock rom. Hope this helps.
Click to expand...
Click to collapse
I have wiped cache, deleted data, tried a factory reset in the stock bootloader, and i have used ADB to sideload a full stock rom (not upgrade package) that i downloaded from OnePlus.
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Exodusche said:
Flash old stock recovery then 2.2.3. From there you can flash any MM stock firmware.
Click to expand...
Click to collapse
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
jtg1984 said:
Pardon me for being nooby, but how do i do this? Do i just sideload in ADB like i did the ROM? Most instructions i'm finding assume access to the OS either normally or through fastboot. I'm just stuck in the default recovery.
Thanks for the tip, though. Looking for a copy of the old stock recovery now. Did OnePlus alter their stock recovery recently? In some threads i've seen people say that a recent update made them unable to load a non-stock ROM. Is that the new recovery blocking access to non-1+ operating systems?
Click to expand...
Click to collapse
Fastboot flash easiest way. Make sure it's the old recovery from 2.2.2. Not the new mm stock recovery.
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
I m not a dev, i m a newbie like you. i hv done a lot of experiments with my oneplus-x, as for u the first update u got few days back should be oos 3.1.2 and the one u got 2 days before should be 3.1.3. When u upgrade from lollipop to marshmellow, even your stock recovery got upgraded to latest version, which is something different from old lollipop recovery.
You said you have access to recovery mode. thts pretty much gud, what u can do is that wipe data and cache through stock recovery and do a clean install of oos 3.1.3. I ll be providing all the necessary links down below. If you need assistance with fastboot cmds and anything feel free to ask.
Thanks to original link provider @Sachin7843
Useful Links: -
1. Stock Lollipop Recovery - https://s3.amazonaws.com/oxygenos.oneplus.net/OPX_recovery.img
2. Official TWRP Recovery - https://dl.twrp.me/onyx/
3. Blu Spark Recovery - http://forum.xda-developers.com/devdb/project/dl/?id=20236
4. SuperSU for OOS 3.x.x - https://drive.google.com/file/d/0B4K5cvm1zdldcmZpc3RuVnRjUUE/view
5. Unbrick Guide - http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
6. Official Oxygen OS 3.1.3 link - https://s3.amazonaws.com/oxygenos.o...OTA_018_all_201609291837_741146bcf28e4587.zip
7. SD Card Writable fix in MM - http://forum.xda-developers.com/android/software/fix-extsd-fix-v1-0b-2016-01-18-t3296266
8. For Stock MM Recovery - http://forum.xda-developers.com/oneplus-x/general/oxygenos-3-1-0-marshmallow-community-t3445043
Sorry for my bad english
jtg1984 said:
Yes, but how do i install the old stock recovery? I dug around on the forums and found the file, but the phone rejects it when sideloading and doesn't show the .img in the filesystem when inserted on a SD card.
Have to send it off to 1+ maybe? Literally all i can access right now is the (new) stock recovery. I never modded, rooted, etc before the software update sent me into the chasing dots
Click to expand...
Click to collapse
Don't sideload it, use fastboot to flash it. "Fastboot flash recovery name.img" - without he quotes and the image name.
Sorry for vanishing. Had a busy week.
Not sure what happened the first time i tried to put the 2.2.3 image on the SD card, because the file didn't show up in my recovery, but i tried again later (after giving up on flashing the old recovery, since i couldn't figure out how to do that in recovery) and managed to do a clean install of the older OOS version.
That did the trick, and after booting up, my phone proceeded to update again - this time without any crashes or errors with my apps afterward. The phone still does the red dot with the white dots chasing around it when it boots up, which must be the new boot screen. It also seems to stay on that screen for much longer than it stayed on the old morphing shape boot screen, but it still boots up reliably now after 30-60 seconds rather than freezing in boot forever.
I've since enabled dev mode on my phone. Is that going to be enough to enable ADB commands from recovery? I kind of like that i've kept my phone stock, so i'll leave it that way if i can, but it would have been much easier to fix this problem if i'd had access to most of my debug commands. As it was, without dev mode and in the standard recovery, it seemed that sideload was the only command i was able to use, and only when the phone was requesting a sideload over usb
I thought you guys might find this amusing, and hopefully it will help some people that get into a similar situation as myself. First, a little background - I rooted and installed Alliance Rom years ago back before the bootloader was unlocked. This worked amazing for me for a long time but I've recently had some weird issues with my phone so I decided to do a factory reset.
I went into settings, clicked factory reset, and then my phone got into a boot loop on recovery. I remember from before I had to do a regular boot then click recovery at the prompt instead of doing the factory recovery so I did that.
Instead of doing a normal wipe, I wanted to wipe everything on my phone and start from scratch so I did the full wipe (in what I think was TWRP or safestrap or whatever). When I went to reboot my phone it had a message like "are you sure? there's no OS installed" and I clicked ok. Well now I couldn't get the phone to boot into anything except download mode so at least I can use Odin.
I'm frantically searching google to try and find ways to install some sort of recovery so I could load AllianceRom again since I still had the zip file for it. Eureka, I found TWRP for my phone! I tried to flash TWRP through Odin but that doesn't work because my bootloader wasn't unlocked.... I remember this from last time ... all of the places I found online to install any sort of recovery required the phone to be booted into android.
So I'm clicking around and someone has a recovery randomly posted in a thread so I install it thinking, what the hell, what's the worst that could go wrong. So I install it through Odin and boot into normal recovery and I get this message saying my phone has been tampered with and to go to a verizon store immediately! Oops... upon further investigation (looking at the download screen), I tripped the knox flag... oh well, it's not like my phone is in warranty anymore (I got it on release day).
I search around looking for what I should do next and I found a thread that talked about being on complete stock, rooting, then unlocking the bootloader. I download all the files I need (newest firmware here - https://www.sammobile.com/firmwares/galaxy-note3/SM-N900V/ and thread here - https://forum.xda-developers.com/ve...guide-ob6-of1-root-bootloader-unlock-t3439010) to go back to stock and flash in Odin. Actually I didn't download from sammobile.com because it was downloading too slow so I just googled the file name and found it somewhere else faster, go figure.
Everything seems to be going ok then all of a sudden FAIL in Odin... Ahhh what the heck do I do now? Try again obviously! Second try works woo hoo! Phone start booting up, things are looking good!!! hooray!! But wait... it's taking forever to start and it's stuck on the Verizon logo... uh oh... taking way too long to boot up so I pull the battery and try again. Boots right in saying that android is upgrading so I think I'm finally in the home stretch here.
I try to run the ArabicToolApp for Root but I installed the latest firmware which isn't supported DAMN IT! Downloaded the correct firmware (OB6!), flashed in Odin, same problem before where it was stuck on the red verizon screen, pulled battery, rebooted, finally time to get root!
Phone finally boots into OS and I get a popup "unfortunatley com.google.process.gapps has stopped" great... and it keeps coming up over and over again after I hit ok... just my luck! Reboot again to see if that fixes the issue. Seems weird that I didn't have to go through all the initial setup stuff I did on the other version I installed... hmm... or maybe it was because I pulled the battery on the red verizon screen? Whatever. I somehow manage to get to options to do a factory reset and I let the verizon screen stay on a while this time. I'll go take my contacts out and give my wife some love while I wait
Come back and the phone is at the setup wizard, this is good news. Enabled USB debugging, installed root, done! Thank god!
Next I want to unlock the bootloader. I follow the steps here which aren't very clear (I'm guessing on purpose for novice computer users) - https://forum.xda-developers.com/ve...l/official-note-3-verizon-bootloader-t3359370
1. I installed eMMC from the play store to make sure my CID started with a 15, it does so I know I'm good to use the hack.
2. I installed both files in the unlock kit (adb and driver setup)
3. Fired up adb, navigated to where I had unlock_n3, and ran through the first part of the code once, reboot my phone, checked that the CID was the developer CID, and then ran the second part of the code three times before it worked
I verified the bootloader was installed correctly by trying to install TWRP through Odin, which worked!
I'm going to try out Jasmine Rom since it's a popular one that is on 5.0. My SD card only showed 30 megs free or something like that, so I formatted it from within android and copied the zip file over and installed the Rom through TWRP. Rom installed just fine, so I did one last factory reset which worked great and I think I'm finally good to go!
If you have any questions or run into any issues feel free to reply here and I'll try to help as much as I can.
Glad it worked out for you in the end.
From making a few mistakes I know that sinking feeling "oh no, what have I done?"
FWIW, the bootloader unlock method (in principle) works from nearly ANY ROM which is rooted - so, you would have saved yourself a bunch of time if you had started with that before you wiped the Alliance ROM. So long as you have root and a CID value that starts with 0x15, you just need root privileges - no need to return to stock and re-root.
(The "in principle" part is that there were several bugs in the "safety checks" portion of the unlocker binary that were sensitive to the OS revision, so you might have to search through the unlock thread to find a version of the unlock binary that is compatible with whatever rooted ROM is on the phone when the unlocking is attempted.)
good luck
PS The AryaMod ROM (w/ phantomOne kernel) is pretty solid - Marshmallow w/ S-Pen apps, too! As with any other dev ROM, there are a few sharp edges, but mostly everything works (except NFC).
.
Good afternoon everyone, I got a dilemma here I can't seem to resolve or find a solution on here for. I have a new HTC One M9 (hima) and I was attempting to do a full root and install Lineage OS and Open Gapps. The phone is S-Off, but appears to have a locked bootloader still since it does not have the fastboot option on the bootloader, only boot to downloader, boot to recovery, reboot, and power down options.
When I attempted to install Lineage, I made the mistake of doing an advanced wipe, wiped the data, cache, dalvik cache, and internal storage prior to install figuring this would be like the many installs of custom ROMS I've done in the past.
Well, I cannot get any ROM to work at this point, CM 12, CM13, Bad Boyz, and Viper roms all seem to install ok but will hang on the first boot process and will not load up to the in initial first run wizard screens. I also cannot get Open Gapps to install at all, it reports errors and rejects the install. I've tried it with the verify zip box checked and unchecked, I've tried both the 7.1 ARM and 7.1 ARM64 versions, I've also used Gapps 6.0 with the CM 12 and 13.
Unfortunately I didn't realize I needed to enable OEM unlocking in developer options prior to attempting a boot loader unlock, I have no ROM installed so I cannot do this now.
So my question to everyone is, how do I get an OS installed again on this phone so I can get back to where I was prior to wiping everything so I can begin the root and bootloader unlock process again?
Thanks for your help with this everyone.
I am not a dev, so not positive this is what you will need to do. I think you need to RUU your phone. If phone is Sprint HTC M9, OMJ has a thread with the latest RUU and all the instructions. Of course this does assume you can get into download mode. I had a similar issue a while back, ended up I had to use adapter for SD card into PC to transfer the RUU. Then put SD card back into phone. Hope this gets you started.
Ok thanks, I'll try that.
fldave612 said:
Ok thanks, I'll try that.
Click to expand...
Click to collapse
You get this fixed?
Yes, I was able to get it fixed, I had to RUU it with a signed firmware from HTC directly. Thanks for the help.