TWRP + Root Working on 14S rom X820 - LeEco Le Max 2 ROMs, Kernels, Recoveries, & Other

This is my first post here, so please excuse me for my english, i'm from chile (spanish).
I'm gonna do a little tutorial to Install TWRP and root on Leeco X820....just received yesterday.
First we gonna need the official ROM 14S from here:
http://g3.letv.cn/188/43/59/letv-hd...3S-5.6.014S.zip?b=123456&platid=5&splatid=500
And the Pack that i prepared here:
https://dl.dropboxusercontent.com/u/105732967/twrp+root.rar
Now:
Step 1: Unzip the file twrp+root.rar and Put the file BETA-SuperSU-v2.72-20160510112018.zip on the internal memory,
put LE_X2_X820-CN-FN-FEXCNFN5601405103S-5.6.014S.zip file on the internal memory too (this 2 files)
Step 2: Power off the phone
step 3: Enter to Fastboot mode (turn on pressing volume down)(http://www.netded.com/uploads/allimg/160514/1_160514151201_1.png)
Step 4: on the folder that you created to unzip (example C:/twrp+root) press and hold SHIFT then right mouse click and go to "open command line window here" (or something like that in english)
step5: Connect your phone and wait to install the drivers
step6: on the command line write: "fastboot oem unlock"
step7: If that's ok then write: "fastboot flash recovery Le_X820_TWRP.img"
step8: If that's ok now you have the recovery twrp (chinese) installed (if this not work 1st time, do it again)
setp9: Reboot your phone on recovery mode (holding power button + volume up) (from fastboot, you don't reboot in normal mode)
step10: you gonna see the recovery in chinese, but don't worry, this recovery is the same that always and the options are on the same order: http://www.teamsuperluminal.org/wp-content/uploads/2016/02/twrp3_4.png
step11: go to install and flash the 14S rom (if you want), and if you want to keep your rom (probably 13S) just flash the SuperSU beta file.
If you want to Install a clean rom 14S with google play support (recomended), you have to wipe, then Flash the ROM 14s, and then flash this GAPPS (working fine) http://opengapps.org/ (just choose download ARM64+Android 6.0+ Pico version) and then flash the SuperSU beta file provided.
https://dl.dropboxusercontent.com/u/105732967/Screenshot_20160519-115831.jpg
https://dl.dropboxusercontent.com/u/105732967/Screenshot_20160519-100924.jpg
https://dl.dropboxusercontent.com/u/105732967/Screenshot_20160519-100944.jpg
https://dl.dropboxusercontent.com/u/105732967/Screenshot_20160519-112614.jpg
If you want to change the Language (in my case spanish), you can always use Morelocale (from playstore) with Root privileges

Greetings from Chile!!!!!

This is great but I have a problem . I did fastboot and it said "sending TWRP" okay and "writing Twrp okay"and all well to step 9. It boots to the recovery(LeEco recovery) that came on the phone. Can I bypass that ?

MadMicro said:
This is great but I have a problem . I did fastboot and it said "sending TWRP" okay and "writing Twrp okay"and all well to step 9. It boots to the recovery(LeEco recovery) that came on the phone. Can I bypass that ?
Click to expand...
Click to collapse
do it again, it works for me the 2nd time...and dont let the phone reboot in normal mode...reboot from bastboot into recovery from the fastboot mode pressing and holding On buttond and vol up

julianhrojas said:
do it again, it works for me the 2nd time...and dont let the phone reboot in normal mode...reboot from bastboot into recovery from the fastboot mode pressing and holding On buttond and vol up
Click to expand...
Click to collapse
Very much appreciated, Thanks
I did it again and got Twrp working. I did the wipes and flashed the Rom smoothly. I also flashed the gapps file but it said it was incompatible I then booted to system, shut down and tried and failed to get TWRP so I did whole fastboot twice again and booted TWRP and flashed the file that was “incompatible” with no errors. But I get a number(5-7)”incompatible ‘/cust’ ??? (invalid argument)” with all TWRP operations .
Before leaving I went to 3rd block on rt of TWRP home screen and then to world globe on rt and changed language to English and TWRP is now in English. I then went to bootloader and deleted/inactivated the stock LeEco recovery and can now boot to TWRP normally(power+volme up).
However although I do have the Google Play store app. I keep getting message to say google services has stopped. When I try to add a google account on settings or click on play store app it spends a long time “checking info” and after 1 hour its still checking info.Does anyone have a solution ?

MadMicro said:
Very much appreciated, Thanks
I did it again and got Twrp working. I did the wipes and flashed the Rom smoothly. I also flashed the gapps file but it said it was incompatible I then booted to system, shut down and tried and failed to get TWRP so I did whole fastboot twice again and booted TWRP and flashed the file that was “incompatible” with no errors. But I get a number(5-7)”incompatible ‘/cust’ ??? (invalid argument)” with all TWRP operations .
Before leaving I went to 3rd block on rt of TWRP home screen and then to world globe on rt and changed language to English and TWRP is now in English. I then went to bootloader and deleted/inactivated the stock LeEco recovery and can now boot to TWRP normally(power+volme up).
However although I do have the Google Play store app. I keep getting message to say google services has stopped. When I try to add a google account on settings or click on play store app it spends a long time “checking info” and after 1 hour its still checking info.Does anyone have a solution ?
Click to expand...
Click to collapse
Do.you have flashed the pico version of gapps arm64??...that zip clean and delete all the previous versions of play store and then install the newest. I had problems with playstore too but with the gapps pico flashed all runs fine for me

julianhrojas said:
Do.you have flashed the pico version of gapps arm64??...that zip clean and delete all the previous versions of play store and then install the newest. I had problems with playstore too but with the gapps pico flashed all runs fine for me
Click to expand...
Click to collapse
First it tells me pico version is incompatible then it installed it . I also tried the Arm64 mini version but same result. I get lots of "Com.letv.android.phonecontrol not working" and "Sorry google play services has stopped "
How do you delete apps ? In settings .app management I can disable or force stop but not uninstall. When I press and hold there no uninstall to drag to. When disabled they dissapear but come back when I do factory reset or wipe cache dalvic an data....weird. i have repeated everything a few times but nothing changes .
I havent put a sim card in yet
I have not setup a LeEco acount yet either,.....necessary ?
Even tho I have picked English I still get a lot of status messages in Chinese .
Help appreciated !!!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

MadMicro said:
View attachment 3757709
Click to expand...
Click to collapse
I can do a backup of my system and upload it...if you want it you tell me...only if you know how restore a backup from twrp (you have to generate the code yo name the folder in backup)

Well I think I am at end of road anyhow.
I use TWRP to backup and restore my own phone (not le max 2) but maybe its best if you tell me steps
Please let me use your backup as my le max 2 is a brick at moment

Install google play store (x820)
1) - INSTALL GOOGLE PLAY STORE(X820) htt*://impressivedroid.com/guide-install-google-play-store-on-le-2-x620/
2) - open play market and input login and password
3) - go to TWRP and install GAPPS ARM64+Android 6.0+ Pico version
Work it fine, no errors.

Received mine today from Honorbuy. If I flash twrp, where can I get original Recovery to go back to Stock?
What Color has your device? Mine is Gold but looks like Rose..

If you dont change bootloader in TWRP it will always go back to stock. Why would you want to go back to stock?. I thought it is only useful for offline updates ?

MadMicro said:
If you dont change bootloader in TWRP it will always go back to stock. Why would you want to go back to stock?. I thought it is only useful for offline updates ?
Click to expand...
Click to collapse
If I would sell the Phone I set it back to stock.
Installed TWRP and SuperSU 2.72 Beta. Worked in first attempt. No update to 14s, because of Problems with Playstore. Will wait if its fixed
All working Great, Backups from Oneplus Two (Titanium Backup) restored, without problems

i have updated to 14s and playstore (open gapps pico) installed without problems

Can you change language to German in 14s?
Sent from my ONE A2003 using XDA Free mobile app

So, the OTA update released yesterday will kill your root and remove TWRP. I attempted to reflash TWRP in fastboot mode, but it does not work anymore. The result is that it starts LeEco recovery and then right half of the screen is just random color pattern. Anyone knows if there is an updated TWRP version?

Well, ok, I found it on Chinese forums, here it is:
app.box.com/s/w66pg1h8wo3fj1lrtlcdw2fs3hk1w40a
The ZIP contains all the necessary tools and SuperSU as well. Flash TWRP through fastboot as described in the first post, then SuperSU through TWRP. My TWRP and root are back, all good!

julianhrojas said:
i have updated to 14s and playstore (open gapps pico) installed without problems
Click to expand...
Click to collapse
Hi, my friend, and thanks for your help.
In new LeEco update of 14s, 237s, when I install Open Gapps there is a google play services error.
Dou you install in this new update and works properly?

I think that play services error was also in previous 14S (103s version). @mjoach has the solution in other thread. I have the 237s running and no problem with Play Store.
http://forum.xda-developers.com/le-max-2/how-to/fix-google-play-store-flashing-14s-t3383261

Related

Bricked Honor 7 (PLK-TL01H)

Hi,
I can't get out of the bootloop of my Honor 7. Here below the history:
1) Unlock bootloader: Success
2) Install TWRP: Success
3) Install SuperSU 2.65: Fail
From this point i tried to recover from a new original rom with Multi-tool, but still bootloop. I also wipe all caches but still same issues. I don't know what to do as i have the feeling i tried everything already.
If someones could help me it would be nice. I still have access to bootloader (volume - & power) and I sometimes get access to TWRP but screen freezes, i can't go into any of the settings.
Thanks for your support!
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Flamenawer said:
Download full rom 121 if you are in LP or 320/330 if you are in MM.
Put the rom .app file into dload folder in the SDcard
Flash stock recovery,flash the rigth rom with vol+,+,vol-,+,pwr, the flashing will start automatly.
Upgrade to 180 or 330.
The files:
http://www.modaco.com/forums/topic/...ck-rom-images-updated-1st-april-2016-plk-l01/
Click to expand...
Click to collapse
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Hi,
indeed Flamenaver the link you post is for PLK-L01 only.
Can i use one of these firmware instead which are original ones for PLK-TL01H?
http://emui.huawei.com/cn/plugin.php?id=hwdownload&mod=detail&mid=170
How does this VOL UP + VOL DOWN + Power works exactly? Do I need the press the 3 together until i see the upgrade starting or do I relesea as soon as I see HONOR Welcome Screen ?
Because it is not working if i keep the 3 pressed until something happens, because then it is restarting and restarting for ever.
On the other side, just pressing 3 for 10 seconds and couple of seconds after it powers on doesn't work neither.
Thanks for the support.
Tabithalos said:
That won't work sadly, PLK-L01 is totally different than PLK-TL01H in terms of software.
The updates is also named differently compared to the European version, in the EU (and elsewere?) it's 180, 320, 330 etc. but on the PLK-TL01H it's 6.3.16, 6.4.1 etc.
Click to expand...
Click to collapse
Try to install LP or MM full rom (no ota o zip roms),from stock recovery, with the standard process for your phone, is a universal unbrick procedure for soft_bricked phones.
I can't get access to stock recovery. I can reinstall Stock recovery from Honor Multi Tools but i can't get in it.
If i keep vol+ & Power or Vol+, Vol- & Power pressed i get onl the honor welcome screen bootloop, nothing else
Hi, I got into this mode in the end. Is this the Force update mode?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was not easy to get in. Keep you informed in a couple of seconds what the results are.
Thanks
Tried twice already and always stuck at 90%...
sebastien_be said:
Tried twice already and always stuck at 90%...
Click to expand...
Click to collapse
If it's stuck at 90% it's not working, believe me, I've had the same problem, I tried to update SuperSU and it bricked. Had to factory reset it and update the phone to the newest version which currently is 6.4.1, THEN go through the process of installing TWRP, SuperSU etc.
If you can't get the updates via the "Updater" option in the options, try to manually downgrade/upgrade it and see if it appears. You have to do some fancy google-translate to chinese to find the update packages on chinese forums.
Why U don't try the Honor 7 Multitool and the huawei update extractor combo???
That must be work!
Hi,
this is the latest status: https://youtu.be/QsPOg4lKkSc
I'm already using Multi-Tools and extracted a PLK-TL01H stock rom. I then used the unbrick option in multi-tools and restores this stock rom. But even though it starts fine, i can enter my pin code but when the language screens comes in, it makes a weird noise and reboots.
I then went into TWRP which works fine and could wipe cache and wipe dalvik cache. But I'm still stuck with welcome crash.
Any idea what to do? As reminder:
1) Bootloader is unlocked
2) Bootloader screen works fine (fastboot works but adb doesn't)
3) TWRP screen also works fine.
Thank you!
Did you try with an older or an other stock rom?
Yes I tried these two versions;
PLK-TL01H-C01B201
PLK-UL-TL-CL_EMUI3.1_Android5.1_5.12.1
Actually this version: PLK-TL01H-C01B201 works fine but only without sim card and SD card. If one of these is inside then i get automated reboot after entering pin code. But if i reboot without these two, then the phone works fine (i can get access to wifi, menu, and so on...).
WEIRD!
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
sebastien_be said:
Hi,
My Honor 7 is still bricked and i can't get out of it. I tried to unbrick by flashing the following files from a stock rom:
fastboot flash boot .\Unbrick\BOOT.img
fastboot flash cust .\Unbrick\CUST.img
fastboot flash recovery .\Unbrick\RECOVERY.img
fastboot flash system .\Unbrick\SYSTEM.img
The flash of these 4 files works fine. I then get the welcome screen where i can choose the language, HiCloud settings and so on. As long as i do not get out of the flight mode it seems to be stable. But when i enter the pin code of my simcard (amongst others), then i get a crash and reboot.
So i have the feeling that there are still some conflicts. In the stock rom there are many other IMG files. Shouldn't I also flash them? I have the following IMG files: 3RDMODEM, CACHE, CRC, CURVER, DTIMAGE, EFI, FASTBOOT, MODEM, etc etc.
I have the feeling that if i flash them all, then it might work fine. But all files do not have a specific partition, so i don't know how to flash them.
Thanks for the support!
Click to expand...
Click to collapse
The main problem that you were on MM version (6.3.16-DEV edition of ROM, no official update) of ROM and you're trying to flash Lollipop (B201, 5.12.1). It means that your problems are probably caused by this. Try to flash 5.12.16 then OTA update to 6.1.1 (using WiFi if possible) and then rollback from Emui 4 to Emui 3.1 if you want use Emui 3.1 and Lollipop. it's up to you. It's possible that your will be able to use SIM card when you would update to 6.1.1 (MM)
Sent from PLK-TL01H
SOLVED!
Thank you Lucki_X and Inside!Out ! Indeed i was trying to flash with Android 5.0 while i was already on Android 6.
Consequently I used the unbrick option from Multi-tools by using this version PLK-TL01H_EMUI4.0_Android6.0_6.2.1(B634).zip
Now everything works fine. Can anyone tell me how to install SuperSU? Because it is due to installation of SuperSU through TWRP that it caused the crash. I installed SuperSU 2.65 BETA.
How to do and which version to install to avoid bootloop?
Thanks very much,
Sebastien.
Hi All,
any idea why i now only have 3,87GB available as internal storage?
sebastien_be said:
Hi All,
any idea why i now only have 3,87GB available as internal storage?
Click to expand...
Click to collapse
Probably because you have multiple ghost systems as a result of previous still in memory. Factory reset will help.
Thank you! This is also solved now (Factory reset in TWRP + Calvik & Cache Wipes)!
Last question: Any advice on how to install SuperSU? Because by trying to install 2.65 BETA it caused the bootloop earlier.
Is there any version to propose instead of another one?
Thanks,
To answer my question: There is only the v2.62 that is working with Honor7 ! I Tried 2.49 and 2.65 both creates startup bootloop. Hopefully this time i got a full backup made in TWRP, was pretty easy to comeback to a working version.
i have a similiar brick as you. Flashed from B201 to B352 via the OTA. Had a boodloop, tried to erase cache and factory reset.
Tried to unbrick my phone with multi tool (first with the B201 udpate.app - now with B634 update.app). Now i'm in a bootloop again. What can I do?
EDIT: I'm in the ROM now, but can't enable my SIM card and WIFI is also not working
What can i do?

OPX - No Access to Recovery or Bootloader. OOS 2.2.3 Booting normally.

I am on OOS 2.2.3 on my Oneplus X. Rooted with Twrp recovery. Was not able to flash the new and official OOS 3.1.3 zip file through TWRP, so flashed Blue_spark TWRP in recovery mode (read somewhere that it could have enabled me to flash OOS 3.1.3). Now the phone boots into OOS 2.2.3 normally, but I cant boot into recovery or bootloader and it gets stuck at the logo screen in both these modes.
Could someone please help me out with this?
Shalabh21 said:
I am on OOS 2.2.3 on my Oneplus X. Rooted with Twrp recovery. Was not able to flash the new and official OOS 3.1.3 zip file through TWRP, so flashed Blue_spark TWRP in recovery mode (read somewhere that it could have enabled me to flash OOS 3.1.3). Now the phone boots into OOS 2.2.3 normally, but I cant boot into recovery or bootloader and it gets stuck at the logo screen in both these modes.
Could someone please help me out with this?
Click to expand...
Click to collapse
As a result of this, I am not even able to do a manual factory reset from the setting menu in OOS 2.2.3, because when i try to initiate this the phone again gets stuck at the logo screen of recovery mode.
Shalabh21 said:
I am on OOS 2.2.3 on my Oneplus X. Rooted with Twrp recovery. Was not able to flash the new and official OOS 3.1.3 zip file through TWRP, so flashed Blue_spark TWRP in recovery mode (read somewhere that it could have enabled me to flash OOS 3.1.3). Now the phone boots into OOS 2.2.3 normally, but I cant boot into recovery or bootloader and it gets stuck at the logo screen in both these modes.
Could someone please help me out with this?
Click to expand...
Click to collapse
blu.spark TWRP v41 uses the updated Marshmallow bootloader from OOS3.1.3, and you are on the Lollipop bootloader.
Lollipop Bootloader recovery won't boot on Marshmallow bootloader and Marshmallow bootloader recovery won't boot on Lollipop bootloader.
If you wanna flash the 3.1.3 zip, then use these instructions.
Download Oxygen OS 3.1.3 full ROM
Download MM based unofficial TWRP
Downloaded Modded SuperSU if you want root
You will require a PC with WinRAR & Notepad++, because as we are running custom ROMs the zip will give an error 7 saying that The package is for OnePlus, this is an onyx, we need to remove that.
Don't worry, its super easy.
- Download the OOS3 zip, copy it to your PCs desktop
- Open it with winRAR, dont extract it, just open it
- There will be a META-INF folder, open it
- Then open com, then google, then android, there will be 2 files here, updater-binary & updater script
- Double click on updater-script
- It will ask which app to use to open the file, then select to open with Notepad++ (designate it from its installed directory if it isn't visible in the initial list)
- The file will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Delete the entire first line that starts with getprop
- Now it should look like this
- Now press Ctrl+S to save the file and close the window
- WinRAR will ask weather to update changes in the archive, say yes to that
- Let it finish its job
- Done !
Moving on to the flashing now...
Assuming you on OOS2.2.3, goto settings, enable Advanced Reboot.
Then reboot to bootloader, this is fastboot mode.
Flash this recovery.
Done, now...
- Copy the modded OOS3 zip into your Device
- Boot into TWRP recovery
- Wipe system, data, cache & dalvik/art cache
- Flash the modified OOS3 zip
- Let it complete
- After it completes, press the wipe cache/dalvik button below
- Now reboot to system
- Complete the initial setup
- Goto settings, unlock developer options by tapping 7 times on build number in about phone
- Enable advanced reboot
- Then reboot to bootloader
- Flash the MM based unofficial TWRP via fastboot
- Remember to boot into this newly flash TWRP before booting into system so that it doesn't overwite it
- Done
Now you are on OOS 3.1.3, and have a working TWRP, you can proceed to flash SuperSU etc to gain root
Joshwin Aranha said:
blu.spark TWRP v41 uses the updated Marshmallow bootloader from OOS3.1.3, and you are on the Lollipop bootloader.
Lollipop Bootloader recovery won't boot on Marshmallow bootloader and Marshmallow bootloader recovery won't boot on Lollipop bootloader.
If you wanna flash the 3.1.3 zip, then use these instructions.
Download Oxygen OS 3.1.3 full ROM
Download MM based unofficial TWRP
Downloaded Modded SuperSU if you want root
You will require a PC with WinRAR & Notepad++, because as we are running custom ROMs the zip will give an error 7 saying that The package is for OnePlus, this is an onyx, we need to remove that.
Don't worry, its super easy.
- Download the OOS3 zip, copy it to your PCs desktop
- Open it with winRAR, dont extract it, just open it
- There will be a META-INF folder, open it
- Then open com, then google, then android, there will be 2 files here, updater-binary & updater script
- Double click on updater-script
- It will ask which app to use to open the file, then select to open with Notepad++ (designate it from its installed directory if it isn't visible in the initial list)
- The file will look like this
- Delete the entire first line that starts with getprop
- Now it should look like this
- Now press Ctrl+S to save the file and close the window
- WinRAR will ask weather to update changes in the archive, say yes to that
- Let it finish its job
- Done !
Moving on to the flashing now...
Assuming you on OOS2.2.3, goto settings, enable Advanced Reboot.
Then reboot to bootloader, this is fastboot mode.
Flash this recovery.
Done, now...
- Copy the modded OOS3 zip into your Device
- Boot into TWRP recovery
- Wipe system, data, cache & dalvik/art cache
- Flash the modified OOS3 zip
- Let it complete
- After it completes, press the wipe cache/dalvik button below
- Now reboot to system
- Complete the initial setup
- Goto settings, unlock developer options by tapping 7 times on build number in about phone
- Enable advanced reboot
- Then reboot to bootloader
- Flash the MM based unofficial TWRP via fastboot
- Remember to boot into this newly flash TWRP before booting into system so that it doesn't overwite it
- Done
Now you are on OOS 3.1.3, and have a working TWRP, you can proceed to flash SuperSU etc to gain root
Click to expand...
Click to collapse
Thank you very much Joshwin Aranha. This worked like a charm.
However I modified the last step and flashed OOS recovery instead. Want to use the phone without root for a while, because the main reason I rooted it in the first place was to install Greenify and save battery (battery used to drain heavily in OOS 2.2.2 and all prior versions), but unfortunately it did not have a great impact on battery life. So going back to stock version for now.
Shalabh21 said:
Thank you very much Joshwin Aranha. This worked like a charm.
However I modified the last step and flashed OOS recovery instead. Want to use the phone without root for a while, because the main reason I rooted it in the first place was to install Greenify and save battery (battery used to drain heavily in OOS 2.2.2 and all prior versions), but unfortunately it did not have a great impact on battery life. So going back to stock version for now.
Click to expand...
Click to collapse
Whatever rocks your boat buddy, glad you sorted that out.
OPX stuck at oneplus logo after following the procedure
@Joshwin Aranha
Hi, I followed the exact same procedure you mentioned, and the process goes smoothly. But when i reboot the phone is stuck at oneplus logo (when i check through my PC for the status it says it is in fastboot mode).
I can easily flash OOS 2.2.3 and move to lollipop , but the problem occurs in OOS 3.1.3 MM
P.S. - i am not rooted.
hbansal24x7 said:
@Joshwin Aranha
Hi, I followed the exact same procedure you mentioned, and the process goes smoothly. But when i reboot the phone is stuck at oneplus logo (when i check through my PC for the status it says it is in fastboot mode).
I can easily flash OOS 2.2.3 and move to lollipop , but the problem occurs in OOS 3.1.3 MM
P.S. - i am not rooted.
Click to expand...
Click to collapse
Which recovery did you use to flash OOS3 ? And did you properly wipe everything ? Try re-flashing.
Joshwin Aranha said:
Which recovery did you use to flash OOS3 ? And did you properly wipe everything ? Try re-flashing.
Click to expand...
Click to collapse
I have used official TWRP that you mentioned in the procedure. I can easily flash CM13 and get my phone running. The problem is only coming in flashing OOS 3.1.3 after OOS 2.2.3.
And yes i have tried it multiple times. With factory reset, user data erase . Everything.
One quirk which i faced 1 time was that while flashing OOS 3 via official twrp 3.0.2.0 , during system verification stage i got an error "system partition has unexpected contents". I cleaned dalvik/cache/data and the error went away but the problem still persists
hbansal24x7 said:
I have used official TWRP that you mentioned in the procedure. I can easily flash CM13 and get my phone running. The problem is only coming in flashing OOS 3.1.3 after OOS 2.2.3.
And yes i have tried it multiple times. With factory reset, user data erase . Everything.
One quirk which i faced 1 time was that while flashing OOS 3 via official twrp 3.0.2.0 , during system verification stage i got an error "system partition has unexpected contents". I cleaned dalvik/cache/data and the error went away but the problem still persists
Click to expand...
Click to collapse
Does the OOS3 zip give any errors ? Or flashes properly ? This seems like a peculiar issue nonetheless..
Joshwin Aranha said:
Does the OOS3 zip give any errors ? Or flashes properly ? This seems like a peculiar issue nonetheless..
Click to expand...
Click to collapse
It does flash properly when i try to flash from OOS 2.2.3->3.1.3 . What i have observed is that as soon as the phone starts it gets stuck on oneplus logo without "android" written below. When i plug it into my system and check the device, it responds to "fastboot devices". I guess there is some issue with the bootloader or something
hbansal24x7 said:
It does flash properly when i try to flash from OOS 2.2.3->3.1.3 . What i have observed is that as soon as the phone starts it gets stuck on oneplus logo without "android" written below. When i plug it into my system and check the device, it responds to "fastboot devices". I guess there is some issue with the bootloader or something
Click to expand...
Click to collapse
Very the md5 of the OOS3 zip to check for a corrupted download.
Original md5 is 162f12d4dfef0142a184e761da868c5f
Joshwin Aranha said:
Very the md5 of the OOS3 zip to check for a corrupted download.
Original md5 is 162f12d4dfef0142a184e761da868c5f
Click to expand...
Click to collapse
MD5 is the same for UNCHANGED zip. i guess md5 will differ on a modified zip due to the changes you mentioned in the process.

[Root images] Boot 10.2.24.0 & 10.2.9.0 & 10.2.26.0

Version 10.2.26.0
Version 10.2.24.0 ------------ > Stock/Root
Version 10.2.9.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
T4Ump said:
Version 10.2.24.0 - Link
Click to expand...
Click to collapse
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
vtec303 said:
so what do we do with this? fastboot it? is it like a full rom with magisk, rooted? cheers
Click to expand...
Click to collapse
Fastboot flash boot.img
It's only magisk for 10.2.24
You can create your own if you want, it's just 30s faster
Code:
fastboot flash boot boot.img
Thank you so much for posting this. I'd been trying for 2 days with twrp and magisk (19.1 and 19.2) and could never get past the recovery bootloop on my Mi 9.
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Does anyone have boot.img V10.2.9.0.PFAMIXM? I wanna try root, but only need that file
xxx
T4Ump said:
xxx
Click to expand...
Click to collapse
Hi, thanks for the patched one. Do you still have the stock one? My phone stuck at recovery mode
Edited: nvm. I'll download the fastboot ROM. Thank you anyway.
realm9thfeb said:
Are you on global stable?
I am having boot loop too.
So far I haven't seen any root for 10.2.9.0
Click to expand...
Click to collapse
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
PriPhaze said:
I don't get it, what are you trying to achieve? Keep encryption and have root access?
Right now i'm on 10.2.9.0 running perfectly fine with root (magisk 19.1) but no encryption.
Click to expand...
Click to collapse
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
syreg said:
Hi, could you tell me how you root your phone? I installed magisk manager, chose boot.img then got magisk_patched.img. I flashed it via fastboot flash boot magisk_patched.img but I got stuck at stock recovery after rebooting. Did I miss any step?
Click to expand...
Click to collapse
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
PriPhaze said:
What i did was:
-Flash Stock Global ROM with Xiaomi Flash making sure to set the bat as clean all and NOT clean and lock!
-Once done it will automatically boot , and when it does simply reboot and hold down vol to go to the fastboot
-Flash Recovery img using minimal adb and fastboot
-Type "Fastboot reboot" and hold vol up to go to twrp
-In TWRP FORMAT data to get ride off encryption and reboot into recovery
-Again in TWRP now u can transfer files to the phone, so i patched "Disable_Dm-Verity_ForceEncrypt" and then patched Magisk 19.1
-That's it.
You can now reboot and it will start the phone configuration as normal but once you configure everything u will see that magisk is there and fully works.
Just one thing tho.... be careful if u will restore titanium back up apps...
Don't get me wrong; they do restore correctly but when you make a backup it becomes corrupted or at least that's what happened to me, so make sure to keep backups PRIOR to using the ROM saved in your PC or something.
EDIT: Maybe u should give a try to this twrp https://forum.xda-developers.com/Mi-9/development/recovery-unofficial-twrp-xiaomi-mi-9-t3905825, just got updated few hrs ago and so far seems it works really good.
Click to expand...
Click to collapse
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
T4Ump said:
I have this problem too, do this steps.
1. Fastboot ROM
2. Update last version
3. Flash magisk_patched.boot
4. Factory reset
Done, you have root.
Click to expand...
Click to collapse
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Click to expand...
Click to collapse
Because once I moved back to revolution OS ( I sawp of ROMs quite often ) I realized that my entire apps restored with titanium were crashing , and the few that actually open correctly didn't hold my data.
They were as if you just download them for the first time from the store.
syreg said:
Thank you. I'll try your steps.
How do you know the titanium backup becomes corrupted?
Factort reset? You mean wipe data while stuck at stock recovery? I did. Somehow my phone rooted. But I realized when I charge my phone while turning off it shows mi logo & unlocked words instead of battery icon, even after I unplug the charger. So I have to press power button to turn it on and charge normally. Do you have this problem?
Click to expand...
Click to collapse
No, i dont have this problem.
Root images updated to 19.2 magisk.
10.9.20 require wipe all data after flash patched image, this is not practical at all.
1. you stuck in this rom unless you want to wipe all data every time there is new rom.
2. Magisk bug existed in the latest global stable rom, notification prompted everytime you open Magisk to install zip, you can only ignore it or installation zip brick the phone.
10.2.26.0 root/stock
Can I use those with locked bootloader ?
Sent from my MI 9 using Tapatalk

[GUIDE][RECOVERY][ROOT] Install TWRP and Root (Magisk) Lenovo Z5 Pro GT [L78032]

How to Install TWRP:
Note: that version is UNOFFICIAL TWRP-3.3.0-0524
.Pre-Requirements
ADB means Android Debug Bridge, and it is software that you should always do have installed on your PC.
Pre-Requisite 1
Make sure that you have the drivers for your phone installed on your PC.
If not, you can download and install them from here https://devsjournal.com/usb-drivers-...d-devices.html
Pre-Requisite 2
You must also install: Minimal ADB & Fastboot, you can download the software
from here https://devsjournal.com/download-min...boot-tool.html
Pre-Requisite 3
Your device needs this with unlocked bootloader
if it is not unlocked do the tutorial to unlock HERE
Pre-Requisite 4
Make sure you have enabled 'USB Debugging' and OEM Unlocking on your device
Settings -> Advanced settings -> Developer Options
PAY ATTENTION: If you do not see the Developer Options menu you need to do this:
Settings -> Device Info -> tap 6 or 7 times on the 'ZUI version' entry
A pop-up should appear, telling you 'now you are a developer'
------------------------------------------------
1) Download TWRP: recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
2) After getting the TWRP file put it in the same ADB folder
3) Now start the phone in bootlader by doing this:
Connect the phone to the PC
Start the Minimal ADB & Fastboot program from the PC
On the PC screen, type:
adb reboot bootloader
(A request may appear on the phone screen with permission of USB debugging, accept it)
The phone will now restart in Bootloader mode.
4) Now that you are in bootloader mode, from the PC, from the screen
Minimal ADB and Fastboot type:
fastboot flash recovery recovery-TWRP-3.3.0-0524-LENOVO_Z5PRO_GT-CN-wzsx150.img
Sending 'recovery' (98304 KB) OKAY [ 5.970s]
Writing 'recovery' OKAY [ 0.539s]
Done !
---------
.How to Install Root Magisk:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Done !
Credits:
Maker: wzsx150
Developer Team: LR.Team
Is there any issues related to this recovery?
firemax13 said:
Is there any issues related to this recovery?
Click to expand...
Click to collapse
I had no problem with this recovery
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
luigi0824 said:
Have the same scenario as you but I haven't done the tutorial yet as I read your post and I got concerned. Have you fix you issue? Is it safe to do this tutorial?
Click to expand...
Click to collapse
I've read somewhere that you need to flash vbmeta.img if verified boot is enabled, however I couldn't find the correct img to flash anywhere. Maybe if we ask someone that has the phone already rooted.
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
BlueIce84 said:
No solution so far. No twrp and no root
Now I have flashed the original rom with ZUI 10. Works well and updated to ZUI 11.
Click to expand...
Click to collapse
What method would you follow to install the stock rom, like you, it comes with the bootloader unlocked by the seller and I don't know how to flash stock rom
Use this guide:
https://forum.xda-developers.com/z5-pro-gt/how-to/guide-unbrick-guide-lenovo-z5-pro-gt-t3915945
carlshark said:
Can anyone post wzsx150's newest TWRP 3.3.1 from October 4? It's in this thread but the download link is for registered users only. I can't sign up for a Club Lenovo account.
Click to expand...
Click to collapse
I gave up on clublenovo. They require SMS authentication to post so even when you log in you can't post and download. TWRP 3.3.1 is also available from 4PDA. That's what I used.
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
luigi0824 said:
I was able to flash the TWRP 3.3.1 but i cant root nor i cant flash anything as the folders inside the sdcard directory is showing in weird names
Click to expand...
Click to collapse
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
thorvall said:
You need to decrypt the internal storage.
normally this is done by entering to ping code to unlock the phone in TWRP on start up.
Click to expand...
Click to collapse
Will I lose any data if I decrypt my phone? And where do I find that pin code?
luigi0824 said:
Will I lose any data if I decrypt my phone? And where do I find that pin code?
Click to expand...
Click to collapse
Its the pin code you use to open the phone.
And enabling does not remove data, but it does give twrp read/write permission
Is it possible to implement support for OTA updates through TWRP?
BlueIce84 said:
My device was unlocked by vendor. I'm unable to boot into twrp to root my device. The flashing is successful but it will only boot in a simple recovery where I can only install an "update.zip".
Have tried this https://forum.xda-developers.com/z5...-guide-lenovo-z5-pro-gt-t3915945#post81055547 but the problem remains.
Hope anyone can help. I need to root my device. Thanks
Click to expand...
Click to collapse
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
butterx2341 said:
i had the same issue and discover a solution
1) you have to manually go to your phone after you finish the flash below. DO NOT cmd fastboot reboot as it will flash stock
recovery
a) fastboot flash recovery twrp.img ( i rename the tweak recovery file to twrp.img)
b) http://4pda.ru/forum/index.php?showtopic=973179&st=0
(tweak recovery version 3.31)
2) after flash quickly go to your phone fastboot mode ( reminder again: do not tyoe fastboot reboot after flash successful appear in cmd)
3) manually select recovery , select english then select reboot and TWRP will appear
issues
1) i cannot manually tweak recovery via phone ( power +volume down ) as stock recovery will appear again.
A) so you need to go your PC to redo flash recovery again
B) i did a back up and redo PC flassh recovery again and mine files are stored successful
c) there is no install root in TWRP
D) about backup...
.best to back up via OTA-USB. pixel GCI crash ( QUALCOMM CRASH DUMP MODE ) my phone and my restore
file was missing as TWRP rename the restore file. spent one hour it so decide to do stock rom
current
a) I have not flash any rom yet and my original ANTUTU benchmark hovers around 300000 to 350000 based on vendor custom global rom
b) my phone model is 8gb 128gb android version 9 and lenovo version 11.0.084
c) updatess and NFC not supported
d) i opt not too root
e) bootloader still unlock
REQUEST...
would appreciate a ROM recommendation
a) have anyone flash a rom (not china stock rom) wirh an antutu beachmark abve 400000 ?
from a novice... after 2 weeks i can finally flash tweak recovery from the phonE.
about flashing stock rom..
i opt for stock rom and my antutu hovers around 409000 to 418000. from LENOVO app centre you can install play store
Click to expand...
Click to collapse
If you boot your ZUI system, your twrp will be overwritten by a stock recovery.
However if you flash magisk, your twrp won't be overwritten anymore. If you want to preserve your twrp after rebooting on ZUI, you need to flash magisk.
whatever I do.. the twrp wont be installed (let alone the root/magisk). ADB does say the twrp is flashed... but it will always boot to or the bootloader.. or the system (not the lenovo recovery or twrp recovery). Quiet frustrating... what can I do? Want this boy rooted!
Edit: done. The twrp linked in the tutorial is not correct use this one: https://drive.google.com/file/d/13mt0RLmT83BHSUBpH-J7EhaeZQ-MPYUu/view
That worked!
I want to unlock my bootloader but the site where you request the image file for unlocking it wont accept my IMEI1.. any idea guys?

[Q] Root & TWRP 3.4.0 for Android 10.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Root & TWRP 3.4.0 for Android 10.
Root and absolutely working TWRP 3.4.0 on Android 10!​
In the new TWRP and Root installation method described below, there is no need to format the Data partition to remove the encryption.
Thanks to TWRP's built-in FB Encryption (File Based Encryption), the contents of the Data partition are available with encryption preserved. The folders on the external memory have the correct names and structure.
Temporary flaw: each new firmware requires a new TWRP.
1. Download archive for up-to-date firmware (as of 09.12.20 - QPHS30.29-Q3-28-13-6) with files for installation TWRP and Magisk Root_TWRP_QPHS30.29-Q3-28-13-6.zip
2. Extract files:
- TWRP-Q-3.4.0-parker-nemo-nemo.img to the drivers adb & fastboot folder;
- Magisk-disable-dm-verity-v20.4.zip to the SD Card.
3. Boot the phone in fastboot mode, connect it to a PC and perform the following commands:
Code:
fastboot flash boot C:\adb\TWRP-Q-3.4.0-parker-nemo-nemo.img
4. After installation is complete, restart the phone in Recovery.
5. Go to the "Install" section. Click on "Select Storage" button, select Micro SD card, OK. Install Magisk-disable-dm-verity-v20.4.zip.
6. Reboot into the system.
Attention, it's important!
In case of release of new stock firmware RETEU, or you have a device for other regions, you can update TWRP yourself in the following way:
So, in order for you to have TWRP, mobile communications and Wi-Fi, you need to do the following:
- Copy to SD Card boot.img from Stok firmware archive, which is currently installed on your phone;
- Copy to the SD card twrp-installer-3.4.0-0-parker-nemo-nemo.zip;
- Follow step 3 of the basic instructions;
- Install directly in the TWRP boot.img itself under Boot;
- Install the twrp-installer;
- Install Magisk-disable-dm-verity-v20.4.zip.
Earlier versions of TWRP
QPHS30.29-Q3-28-13-2
QPHS30.29-Q3-28-13
Old Instruction:
1. Download archive with files for installation Magisk and TWRP Google Drive.
2. Extract files:
- boot_magisk_q.img to the drivers adb & fastboot folder;
- Magisk-ddmv-v20.4.apk, Magisk-disable-dm-verity-v20.4.zip, twrp-installer-3.4.0-0-parker-nemo-nemo.zip to the SD Card.
3. Boot the phone in fastboot mode, connect it to a PC and perform the following commands:
Code:
fastboot flash boot C:\adb\boot_magisk_q.img
4. Reboot into the system and install Magisk-ddmv-v20.4.apk.
5. Run the application Magisk Manager, go to the "Modules" tab and select twrp-installer-3.4.0-0-parker-nemo-nemo.zip.
6. After installation is complete, restart the phone in fastboot mode and then in Recovery.
7. Go to "Wipe" section and press "Format data" for decryption. Type "Yes" on request. Go to the TWRP Main Menu and reboot again in the Recovery.
8. Go to the "Install" section. Click on "Select Storage" button, select Micro SD card, OK. Install Magisk-disable-dm-verity-v20.4.zip.
9. Reboot into the system.
Updated TWRP to firmware version QPHS30.29-Q3-28-13-2.
Hey, thanks for doing this. I'm a newbie, but I got through your instructions and it worked! At least at first. After I OEM-unlocked and installed TWRP, Android seemed to be working fine. I went into TWRP installed Magisk and when I restarted it seems my wifi (wifi mac address is "unavailable") and the service state of my radio is off. I can't figure out how to get it back on.
I tried messing around with settings in *#*#4636#*#* , no luck.
I put my sim card in an old phone and it still works (I wondered if I got locked out by my carrier?)
Think it might be connected at all or do I have a separate issue going on here?
EDIT: Nevermind - I used Lenovo's Rescue Smart Assistant and got it fixed...
Thanks!
Wijitmaker said:
Hey, thanks for doing this. I'm a newbie, but I got through your instructions and it worked! At least at first. After I OEM-unlocked and installed TWRP, Android seemed to be working fine. I went into TWRP installed Magisk and when I restarted it seems my wifi (wifi mac address is "unavailable") and the service state of my radio is off. I can't figure out how to get it back on.
I tried messing around with settings in *#*#4636#*#* , no luck.
I put my sim card in an old phone and it still works (I wondered if I got locked out by my carrier?)
Think it might be connected at all or do I have a separate issue going on here?
EDIT: Nevermind - I used Lenovo's Rescue Smart Assistant and got it fixed...
Thanks!
Click to expand...
Click to collapse
What Software Channel intended your phone? I have a RETEU. If you have a different region, this is most likely the reason.
So, in order for you to have TWRP and work mobile communication and Wi-Fi, you need to do the following:
- from the Stock Firmware archive, which is currently installed on your phone, copy boot.img to SD Card;
- twrp-installer-3.4.0-0-parker-nemo-nemo.zip copy to SD Card (see at the attached files).
Install directly in TWRP boot.img and then install TWRP-installer.
Then reinstall Magisk-disable-dm-verity-v20.4.zip (see at the attached files) and whatever you want.
Hi do you have a way to apply OTA update without remove twrp?
Hey,
I have a brand new One Zoom here and like to root it.
Don't wanna brick it, so I have two silly noob questions:
Before performing step 3 in first post above
(fastboot flash boot C:\adb\TWRP-Q-3.4.0-parker-nemo-nemo.img)
I still have to unlock the bootloader, right???
On github, currently there is Magisk v21.1 out. Can I use this newer version or do I MUST use the version provided by ilia3367 in first post?
Thanks to all of you
Solo8000 said:
Hey,
I have a brand new One Zoom here and like to root it.
Don't wanna brick it, so I have two silly noob questions:
Before performing step 3 in first post above
(fastboot flash boot C:\adb\TWRP-Q-3.4.0-parker-nemo-nemo.img)
I still have to unlock the bootloader, right???
On github, currently there is Magisk v21.1 out. Can I use this newer version or do I MUST use the version provided by ilia3367 in first post?
Thanks to all of you
Click to expand...
Click to collapse
Yes your bootloader need to be unlock.
For me with use or twrp I can t install OTA update for résolve that I Have flash again m'y phone with stock Rom and use magisk patch way to Root m'y phone
I have write some instruction on that here
Updated TWRP to version QPHS30.29-Q3-28-13-6, updated the manual.
Solo8000 said:
On github, currently there is Magisk v21.1 out. Can I use this newer version or do I MUST use the version provided by ilia3367 in first post?
Click to expand...
Click to collapse
Use Magisk which is in the Instruction Manual.
This is a special version of Magisk for Motorola devices.
Magisk v21.4 刷机包 Motorola 修改版 | 云梦
介绍 Motorola 有个奇怪的 hab 保护技术,这个组件会保护系统不受侵害。如果不去除这个组件,在开机状态修改系统后,重启将会还原更改,在 TWRP 下修改系统,将无法开机。所以我做了一个修改版 Magisk,以彻底去除这个东西。 注意:仅适用于 Motorola 机型。 特性 - 强制去除 dm-verit
www.htcp.net
When I flash your version of TWRP my network connections go away. I had to reflash the original boot image to get it back.
finally got it. didn't realize you had included the modified zip file in another post.
Just a report:
did the process today, worked like a charme.
One caveat: unlocking bootloader via this stupid motorola web service did not work at first; yesterday evening submitting the correct unlock string always returned "Your Device Does Not Qualify For Bootloader Unlocking"; tried exact same procedure this morning - worked immediately; so I guess this is a problem with Motorola servers.
Right now I have TWRP, Magisk and as it looks ALL smartphone functions including wifi, radio, fingerprint.
My device: Moto Zoom, reteu, build number QPHS30.29-Q3-28-13-6; it's brand new and I did not set up any lock mechanism (like fingerprint) before this process (because some people complain that their fingerprint reader does not work anymore after flashing/rooting; maybe this is a solution to that problem)
Hello, I have a problem/question.
Recently I have a notification of system update available: QPH30.29-Q3-28-13-10, Im' currently on (QPH30.29-Q3-28-13-6) with TWRP an Magisk Installed.
When I try to make the update with the normal System Update it can't apply the update (no specific error).
So I would like to make the update manually; I downloaded the full image zip from here:
lolinet mirrors - firmware, software, iso etc.
lolinet mirrors - powered by h5ai
mirrors.lolinet.com
Then I think I could flash it with MotoFlashPro (using servicefile.xml), but what are the steps to keep everything working (TWRP, Magisk, and all network and fingerprint)?
Are these correct?
So, in order for you to have TWRP, mobile communications and Wi-Fi, you need to do the following:
- Copy to SD Card boot.img from Stok firmware archive, which is currently installed on your phone; (so I have to download the current full image and use the boot.img from this one and not the new firmware?)
- Copy to the SD card twrp-installer-3.4.0-0-parker-nemo-nemo.zip;
- Follow step 3 of the basic instructions;
- Install directly in the TWRP boot.img itself under Boot;
- Install the twrp-installer;
- Install Magisk-disable-dm-verity-v20.4.zip.
Sorry for the stupid questions but I don't want to start the process and brick the phone or lose something.
Thank you
TWRP already got official, is there a small chance to see custom roms like lineage os 18 in future?

Categories

Resources