I just install marshmallow rom in to my s6 edge SM-G925W8. When i was going to use fingerprint lock then its (an error has occurred with the fingerprint sensor) pop up on screen ....
Plz help me i m worried abt it....
Xda member plz help me.....
solution
I fix this problem...
Actually when I use the option of ×#0×# then in sensor .... when check the finger print sensor.. it's always pass then see following option ....
Firstly factory reset then flash stock firmware via Odin.... then it will work....
Plz like it if it's work.
Related
Help Me solve this annoying problem please,
First I Have installed Android Lollipop 5.0.2
Then The Storage Is Full , and i want to upgrade and reset it too ...
after that i download from XperiaFirm , and Make FTF with Flashtool
After That i flash it , than it can turn on , but "SistemUi Stopped Working"
After that i turn off it , than reset it back to lollipop , and The Mobile Network is "x" red
Than i put out SIM card slot , than put in again and no different ..
Can someone help me ??? its very annoying :crying:
mazzkouko said:
Help Me solve this annoying problem please,
First I Have installed Android Lollipop 5.0.2
Then The Storage Is Full , and i want to upgrade and reset it too ...
after that i download from XperiaFirm , and Make FTF with Flashtool
After That i flash it , than it can turn on , but "SistemUi Stopped Working"
After that i turn off it , than reset it back to lollipop , and The Mobile Network is "x" red
Than i put out SIM card slot , than put in again and no different ..
Can someone help me ??? its very annoying :crying:
Click to expand...
Click to collapse
Flash mm again and Mark to wipe applogs, userdata
I already flash it again , bot no different , the signal is "x" red , and the text in the lock screen is invalid card ? I already changes my sim card 2x , and the camera is in problem tooo , camera cant auto focus when i click the screen , and press the button to shoot , and cant shoot a picture , just display the camera that focus is like stuck ? Is there software problem or hardware problem ?
mazzkouko said:
I already flash it again , bot no different , the signal is "x" red , and the text in the lock screen is invalid card ? I already changes my sim card 2x , and the camera is in problem tooo , camera cant auto focus when i click the screen , and press the button to shoot , and cant shoot a picture , just display the camera that focus is like stuck ? Is there software problem or hardware problem ?
Click to expand...
Click to collapse
I flashed it to Android M and it works perfect,battery life is like in kitkat for me.
Camera smooth.
You probably did something wrong when you flashed it.I think,you probably unticked SIMLOCK as it could lead to problems with the network lock on your device.
mazzkouko said:
I already flash it again , bot no different , the signal is "x" red , and the text in the lock screen is invalid card ? I already changes my sim card 2x , and the camera is in problem tooo , camera cant auto focus when i click the screen , and press the button to shoot , and cant shoot a picture , just display the camera that focus is like stuck ? Is there software problem or hardware problem ?
Click to expand...
Click to collapse
Ur phone model? D6503 or other than this?
As in title. I wanted to try out coloros, everything was fine but i didn't like it so i restored my AEX backup. After that autorotating wasn't working, so i flashed sensorfix included in coloros thread on forum. Autorotating works but now i can't use fingerprint. Im able to set up my fingers but when i try to unlock phone it just vibrates (only once, then until i turn screen on it doesnt do anything) and nothing happens. What can i do to fix it? Should i flash stock firmware?
Flash 14.1 firmware
ReDuXX528 said:
As in title. I wanted to try out coloros, everything was fine but i didn't like it so i restored my AEX backup. After that autorotating wasn't working, so i flashed sensorfix included in coloros thread on forum. Autorotating works but now i can't use fingerprint. Im able to set up my fingers but when i try to unlock phone it just vibrates (only once, then until i turn screen on it doesnt do anything) and nothing happens. What can i do to fix it? Should i flash stock firmware?
Click to expand...
Click to collapse
Workaround:-
Screen lock > Register unrecognized finger
and add patern/pin
then go to settings
and don't delete the fingerprints
but remove the screen lock itself
and then add screen lock and register fingerprint
I flashed stock rom via recovery (not fastboot). Can anyone tell me how is that possible fingerprint scanner doesnt work ONLY FOR MY RIGHT INDEX FINGER? Uhh i will flash it via miflash to be sure that everything is stock..
sachin n said:
Workaround:-
Screen lock > Register unrecognized finger
and add patern/pin
then go to settings
and don't delete the fingerprints
but remove the screen lock itself
and then add screen lock and register fingerprint
Click to expand...
Click to collapse
Doesn't work no matter how many times i try.
edit: after flashing stock rom via miflash nothing changes. Now it doesn't work at all. Can't recognise any fp. Maybe i just should send it on warranty..
edit2lol: kinda funny because when my mom or sister set up fp it works good.. what is wrong with me..
ReDuXX528 said:
Doesn't work no matter how many times i try.
edit: after flashing stock rom via miflash nothing changes. Now it doesn't work at all. Can't recognise any fp. Maybe i just should send it on warranty..
edit2lol: kinda funny because when my mom or sister set up fp it works good.. what is wrong with me..
Click to expand...
Click to collapse
Give your phone to mom/sister and get yourself new one. :silly:
JK lulz
Try adding your entry again and again...
- clear the lockscreen lock and fingerprints
- Try to setup new fingerprint.
when asked to press NEXT on Fingerprint screen, put your unrecognized finger on the scanner (DO NOT press NEXT).
- follow the instruction until complete while still keeping your unrecognized finger on FP scanner
- done, now you can add any other fingers and all of them will works
Hey flashed xiaomi.eu and set up 3 times the same finger and it seems to work! Thanks for answers guys!
So my fingerprint sensor stoped working properly in the rr rom then i installed the google experience 8.0 rom and still the same problem. I've already tried changing the modem but no luck. It apears a message saying "fingerprint sensor became unavailable"
Again the same thread. Use a search button.
How long it takes after u flash rr ROM? I am using slim7. Still work here
Im using infocus vision 3 mobile... I have rooted the mobile and when i did factory reset the phone got stuck at twrp loop and did not go any further.. i tried restoring the backup but nothing worked so i download the stock firmware and flashed the mobile now everything works fine except the fingerprint sensor.. when i got to settings to register finger print it is not registering.. people are telling me the only fix is changing motherboard... But I don't buy it.. i think its a software issue... can somebody please tell me a fix other than changing motherboard.. please guys
Rama619 said:
Im using infocus vision 3 mobile... I have rooted the mobile and when i did factory reset the phone got stuck at twrp loop and did not go any further.. i tried restoring the backup but nothing worked so i download the stock firmware and flashed the mobile now everything works fine except the fingerprint sensor.. when i got to settings to register finger print it is not registering.. people are telling me the only fix is changing motherboard... But I don't buy it.. i think its a software issue... can somebody please tell me a fix other than changing motherboard.. please guys
Click to expand...
Click to collapse
I am having the same problem after flashing stock rom, did you find any solution?
Nope.. nothing yet brother...
I have propblem. I installed the stock android 10 and after that my proximity sensor stoped working. During the call, screen wasnt turn off thus I downgraded. Now I am using stock android 9. It still not working. I dont know if the 10 stoped the prox. Hardware. How I can solve that problem. Should I need to wait for the new update or It can be a hardware problem. I formated many times It did not work. I reset no way. I entered to the hw check it says "not support this sensor". When I searched cominity. For note 8 after oupdate the hw passed the test. What to do?
I found a way but I need persist.img file. How can I find that file for mi a3
mehalaktas said:
I have propblem. I installed the stock android 10 and after that my proximity sensor stoped working. During the call, screen wasnt turn off thus I downgraded. Now I am using stock android 9. It still not working. I dont know if the 10 stoped the prox. Hardware. How I can solve that problem. Should I need to wait for the new update or It can be a hardware problem. I formated many times It did not work. I reset no way. I entered to the hw check it says "not support this sensor". When I searched cominity. For note 8 after oupdate the hw passed the test. What to do?
Click to expand...
Click to collapse
I have the same issue. The value for Proximity sensor in Hardware test (*#*#64663#*#*) is -1.
mehalaktas said:
I found a way but I need persist.img file. How can I find that file for mi a3
Click to expand...
Click to collapse
You can find persist.img inside the stock fastboot rom. The guys at 4pda also posted a download link of the persist.img and also a tutorial on how to flash it using twrp.