Project on hold for a moment - my phone didn't like what I built. Going to fix it, then re-open.
So, I got tired of needing my PC to update my phone every month just because I'm rooted. So I used SuperR's Kitchen and took the stock images from Google and made them into flashable zips. These are flashable in TWRP. They are rooted and includes the vendor partition. If enough people request it, I will cook some non-root versions. I plan to add flashable bootloader and radios as well (TBD). I will try to get N zips up and going tonight.
The intention is to keep this up to date every month (until I get a new phone, not likely within the next year or two).
Advice, guidance, and requests are welcome. Doesn't mean I'll follow or fulfill them.
Directions for upgrading from a previous version:
Custom recovery (TWRP) required
Boot into recovery
Flash AOSP-[version]-angler-[build]-bootloader-signed.zip
Flash AOSP-[version]-angler-[build]-radio-signed.zip
Flash AOSP-[version]-angler-[build]-[date]-kernel-signed.zip
Flash AOSP-[version]-Rooted-angler-xxxxxx-[date].zip
OPTIONAL: Flash AOSP-[version]-angler-[build]-recovery-signed.zip (This will replace your custom recovery with the Stock recovery)
Flash any other packages you may want (such as Xposed)
Wipe cache/dalvik
Reboot
Your phone may reboot a time or two during the first boot (mine did). I am the only one that has tested this thus far. Use at your own risk. I am not responsible if this bricks your phone, kills your cat, or your house gets foreclosed on.
If you don't know how to fastboot flash the stock images, you probably should not flash these (just in case).
DOWNLOADS
Please keep in mind: these are hosted on my shared hosting account.
Download speeds will be limited by how many concurrent downloads are happening.
Please let me know if you have any issues downloading and I'll host elsewhere.
6.0.1
May 2016 (MTC19T)
AOSP-6.0.1-Rooted-angler-mtc19t-20160524-signed.zip - 913.7 MB
AOSP-6.0.1-angler-mtc19t-20160524-kernel-signed.zip - 10.1 MB
AOSP-6.0.1-angler-mtc19t-20160524-recovery-signed.zip - 11.1 MB
AOSP-6.0.1-angler-mtc19t-bootloader-signed.zip - 2.3 MB
AOSP-6.0.1-angler-mtc19t-radio-signed.zip - 28.1 MB
N
May 2016 (NPD35K)
COMPLETELY UNTESTED! TRY AT YOUR OWN RISK! ALWAYS PERFORM A NANDROID BACKUP
AOSP-N-Rooted-angler-npd35k-20160524-signed.zip - 1.1 GB
AOSP-N-angler-npd35k-20160524-kernel-signed.zip - 10.4 MB
AOSP-N-angler-npd35k-20160524-recovery-signed.zip - 16.0 MB
AOSP-N-angler-npd35k-bootloader-signed.zip - 2.3 MB
AOSP-N-angler-npd35k-radio-signed.zip - 28.1 MB
XDA:DevDB Information
Pure AOSP Factory, ROM for the Huawei Nexus 6P
Contributors
jparnell8839
ROM OS Version: 6.0.x Marshmallow
Based On: AOSP
Version Information
Status: Testing
Created 2016-05-23
Last Updated 2016-05-23
Changelog
2016-05-24
angler MTC19T (6.0.1 - May 1, 2016)
System/Vendor
Kernel
Bootloader
Stock Recovery
Radio
angler NPD35K (N - May 1, 2016)
System/Vendor
Kernel
Bootloader
Stock Recovery
Radio
2016-05-23
Initial Post
angler MTC19T (6.0.1 - May 1, 2016)
System/Vendor
Kernel
reserved again
Thanks for your contribution. Looking forward to this.
---------- Post added at 03:57 PM ---------- Previous post was at 03:56 PM ----------
Thank you for your contribution.
Thanks man. This will come in handy.
Thanks! Didn't even know this is what needed to be done to be able to update with TWRP. Feels good
Great stuff! Kudo's
eagerly waiting for your ANDP3. keep it up mate!
Thanks for this. Could you do the same for Android N preview images? I keep wanting to check it out, but never have time while at a PC.
rainabba said:
Thanks for this. Could you do the same for Android N preview images? I keep wanting to check it out, but never have time while at a PC.
Click to expand...
Click to collapse
Read 3rd and 4th lines of OP. There is a surprise waiting for you..
great contribution for the community! Can't wait for the N zips and more goodies. What version of superSU are they rooted with? The newest 2.74-2 version? Thanks again!
Does Android Pay work on these builds?
Sent from my Nexus 6P using XDA-Developers mobile app
Maybe you should relabel the title. These are just flashable factory images right? It is not the same as AOSP. The changes are minimal but they are there.
Sent from my Nexus 6P using Tapatalk
Smallsmx3 said:
Maybe you should relabel the title. These are just flashable factory images right? It is not the same as AOSP. The changes are minimal but they are there.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Will do. Thanks.
OP Updated. New instructions, new links for 6.0.1, and added N, all the stock images flashable (except userdata and cache).
Please be careful with N. I uploaded, but have not yet tested them myself.
yung40oz84 said:
great contribution for the community! Can't wait for the N zips and more goodies. What version of superSU are they rooted with? The newest 2.74-2 version? Thanks again!
Click to expand...
Click to collapse
BETA-SuperSU-v2.74 is the one used. Pretty sure I renamed to remove the -2 at the end, but whatever was latest as of yesterday. BTW, N zips are up, but untested. I cannot express how new to this I am, and it's possible it could soft brick your phone. I'm testing the new 6.0.1 zips now, I'll test the N once I'm comfy knowing that the others work
So, I don't know what I did, but my phone did not like what I cooked. May have hard bricked it, which means I did something wrong in the bootloader. For the love of God, if you happened to have downloaded anything in the 5 minute window I had it live, don't flash it.
Thanks for this! Just out of curiosity, how often is the radio being updated?
Sent from my Nexus 6P using XDA-Developers mobile app
After getting permission from the OP I decided to post this.
Android N - these are all from/for preview 3
Flashable bootloader: https://www.androidfilehost.com/?fid=24545065934258631
Flashable radio:
https://www.androidfilehost.com/?fid=24549084345926390
Flashable system:
https://www.androidfilehost.com/?fid=24549084345926426
RatchetPanda said:
After getting permission from the OP I decided to post this.
Android N - these are all from/for preview 3
Flashable bootloader: https://www.androidfilehost.com/?fid=24545065934258631
Flashable radio:
https://www.androidfilehost.com/?fid=24549084345926390
Flashable system:
https://www.androidfilehost.com/?fid=24549084345926426
Click to expand...
Click to collapse
Coming from mm we can just flash via twrp and good to go? Do we need to still be decrypted? Is this pre rooted or do we need to flash su? Thanks
Sent from my Nexus 6P using Tapatalk
Related
Introduction
I'm not really into writing long elaborate OP posts, so here it goes. This is an AOSP compiled, flashable ROM. This ROM is fast and smooth, it is not bloated with useless features. Lustrous ROM has features being added that make it even more useful. You need the 4.04 bootloader! I put a lot of work and love into this rom, if you like it show me some support by donating!
Downloads
ROM Download: Click here!
SuperSU: I'm using 2.40 found Here
First Time Install
Put the file onto your Internal Storage/USB-otg
Reboot into Recovery (CWM/TWRP)
"wipe data/factory reset"
"install zip" -> "install zip from sdcard" -> choose the .zip and confirm (Optional: Add the other zip to flash... TWRP Only I believe)
"Clear cache/bla bla bla"
Flash Gapps
"Clear cache/bla bla bla"
Reboot
first boot may take up to 10 minutes
Features
RRO built in (for Layers)
Super smooth
OTA Updates
Build.prop edits for stability and speed
Super close to stock AOSP
stock kernel
BUGS
I am not sure of any bugs, haven't come across any. If you find some let me know and I'll get it fixed right away!
Credits
Thanks to @sykopompos for being my mentor and helping me out with a lot of things
Thanks to @scrosler for some tidbits and ideas
Thanks to @Chainfire for root
Thanks to the Simple AOSP team for the new gapps
Disclaimer: I am not responsible for anything that may happen to your device, yourself or your family. Flash at your own risk!
XDA:DevDB Information
[ROM] [5.1.1_r1] [Deb]Lustrous Lollipop for Nexus 7 (2013) LTE, ROM for the Nexus 7 (2013)
Contributors
skiman10
ROM OS Version: 5.1.x Lollipop
Based On: AOSP
Version Information
Status: Beta
Created 2014-11-08
Last Updated 2015-06-02
Reserved
Reserved
Thanks for posting. Will update you after I install the ROM
Sent from my Nexus 7 2013 LTE using XDA Premium 4 mobile app
Sweet thanks. Downloading, going to give it a spin.
And yep, that SuperSU is the latest.
Thx @skiman10 will Test it in the evening.
@skiman10 Is this an updated permissive boot image?
great many thanks for your work! Finally lollipop has come to DEB!
Thanks for this ROM. Finally can use android 5.0 on my deb nexus 7.. Successfully flashed this and so far so good. No problem or force close yet. Haven't tried with sim. Everything's run smoother now.
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
mkretzer said:
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
Click to expand...
Click to collapse
Flash the FLO bootloader. It's OK.
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Google+ still missing for me here
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
jayfallen said:
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Click to expand...
Click to collapse
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Ambious said:
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Click to expand...
Click to collapse
root does not work
on this core
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Also can't install Google+ neither from Market nor APK.
Fixed by flashing newer gapps package found here.
hhairplane said:
@skiman10 Is this an updated permissive boot image?
Click to expand...
Click to collapse
I might have to update the boot.img more, I'm pretty sure it is in permissive mode right now. I'll check that out right now.
BladeRider said:
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hmmm you shouldn't have lost your recovery.... I should have turned that off. Let me look. Also you still rock a Galaxy Nexus? Respect.
florynn2003 said:
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Click to expand...
Click to collapse
Ok so GPS is a no go. Got it
hhairplane said:
Google+ still missing for me here
Click to expand...
Click to collapse
What gapps did you flash?
DeathmonkeyGTX said:
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Click to expand...
Click to collapse
I'll look into root right now. I might have missed something in the bootloader
Good morning everyone! I'm awake and ready to smash bugs!
I have decompressed the Nexus 6P factory images and extracted the system.img and and converted it into a TWRP recovery flashable zip. Enjoy
Instructions:
Download ROM
Copy to phone
Boot into recovery (TWRP, etc.)
Make a backup
* Wipe system, data, delvik cache, and cache (if coming from non-stock ROM)
* Wipe devlik cache and cache (if coming from a stock ROM)
Flash ROM
Reboot
Downloads:
Latest Build: 6.0.0-MBD08K
Android 6.0.0
Build MDA89D: LINK
Build MBD08K: LINK
NOTE: These ROM are based on an UNMODIFED version of the stock factory images! NO CHANGES IN ANY WAY WERE MADE to the stock firmware
XDA:DevDB Information
[ROM]Nexus6P Stock ROMs, ROM for the Huawei Nexus 6P
Contributors
Shawn5162
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Created 2015-10-27
Last Updated 2015-10-26
Reserved
Reserved because I can
Probably never going to use this post but it seams to be a tradition by XDA devs
You've been busy in the XDA kitchen!
Thanks for the hard work! My 6P arrives tomorrow
Added to Nexus 6P index thread:
[INDEX] Huawei Nexus 6P
What's the difference between the two? (I feel like I should know this already) ☺
Is TWRP out for nexus 6p?
Let the cooking begin!
bradputt said:
Is TWRP out for nexus 6p?
Click to expand...
Click to collapse
Nope ...Thought I would release this before though.
I am working on a custom TWRP build as we speak though. I will probably release it within a few days.
Also @Dees_Troy is working on official TWRP which should also be coming out within the next few days.
Shawn
kingmikel said:
Thanks for the hard work! My 6P arrives tomorrow
Click to expand...
Click to collapse
how long did yours say "pending"?
dontbeweakvato said:
how long did yours say "pending"?
Click to expand...
Click to collapse
It said "pending" for about a week, then it switched to "processing" for a little over a day, then finally "shipped" :good:
Danish2980 said:
What's the difference between the two? (I feel like I should know this already)
Click to expand...
Click to collapse
Yes please I'd like to know as well.....I've done some unsuccessful searching for this as well.
ggeralds said:
Yes please I'd like to know as well.....I've done some unsuccessful searching for this as well.
Click to expand...
Click to collapse
Ok. So basically when Google updates the AOSP sources (with multiple commits) they push a new build. These new builds also contain security patches and bug fixes (very minor ones). These updates don't add new features most of the time (if they are based on the same android OS version). I have added a new line in the OP where I write the build number for the latest build. This should help people find the latest build faster.
Shawn
Hah, glad to see Shawn here, developed such a good rom for Moto G 2014, hope you will continue your efforts for 6P as well
emiwonder said:
Hah, glad to see Shawn here, developed such a good rom for Moto G 2014, hope you will continue your efforts for 6P as well
Click to expand...
Click to collapse
Nice to see you here too
IS this 1 rooted?
New factory image with the November secruity patch :https://dl.google.com/dl/android/aosp/angler-mdb08m-factory-dbc17940.tgz
MDB08M
NovaSlim said:
New factory image with the November secruity patch :https://dl.google.com/dl/android/aosp/angler-mdb08m-factory-dbc17940.tgz
MDB08M
Click to expand...
Click to collapse
Question about these images from google (first time nexus user, long time crack-flasher here). If i'm running stock and simply want to update to the new build, can i just extract the system image from that package and just flash it via fastboot or will that break things?
Can't wait for latest build thanks for throwing these together!
Sent from my Nexus 6P using Tapatalk
djuniah said:
Question about these images from google (first time nexus user, long time crack-flasher here). If i'm running stock and simply want to update to the new build, can i just extract the system image from that package and just flash it via fastboot or will that break things?
Click to expand...
Click to collapse
That won't boot(you be stuck on the google screen forever), you need to fastboot flash the vendor.img as well. For details:
http://forum.xda-developers.com/nex...-cleancore-n6p-100-lean-stock-mbd08k-t3235306
Hey XDA!
This is just a quick build of AOSP Nougat that I though I should upload and share. It's just pure AOSP with a modified fstab and a bunch of the useless apps removed. While it does boot, the main problem is that there aren't any gapps available, so there is little functionality.
Instructions:
1. Flash vendor.img
2. Flash ROM zip
3. Boot up
Downloads:
Unofficial vendor.img: http://oceighty.co/ Created and uploaded by @xanaxdroid
ROM zip: https://basketbuild.com/ Build and uploaded by me.
DISCLAIMERS:
I'm not responsible for any mishaps you have.
This is simply a courtesy upload, do not expect updates.
The vendor.img was pulled from the OTA and is not an official factory image.
is it rooted?
The latest TWRP version functions with Android N, it now correctly decrypts the phone (yes, I'm aware this ROM is pre-decrypted). You can flash SuperSU through that and then download most of the needed GApps from APKMirror, I know Android N preview GApps were uploaded there.
confused... so I could just flashed this like a regular rom? would my internal disk erase? is this rooted?
you guys need to read the OP and stop asking senseless questions
"It's just pure AOSP with a modified fstab and a bunch of the useless apps removed"
Lol, this is why I wish rooting wasn't just a click away. I miss the old days where you actually had to know what you were doing to root the damn thing like actually being familiar with adb I doubt half the people that root haven't used shell period. Point being that the people that did it knew the ins and outs of what they were doing and there wasnt all this clutter. people used to actually do the time to research and educate themselves on what was going on now it's all entitlement give me give me i don't understand oh blah blah won't work fix it for me anyway this isn't helpful or constructive please delete goodnight
Sent from my Nexus 6P using Tapatalk
Interesting ROM. :good:
Opengapps.org should have 7.0 gapps very shortly. The August 24th build for arm has 7.0, but 8/24 hasn't built for arm64 yet.
Sent from my Nexus 6P using XDA-Developers mobile app
First to market ROM nice!
hibby50 said:
Opengapps.org should have 7.0 gapps very shortly. The August 24th build for arm has 7.0, but 8/24 hasn't built for arm64 yet.
Click to expand...
Click to collapse
ARM64 builds for 7.0 are now available for flashing.
Why do people prefer decrypted roms, what is the advantage?
rest0ck said:
Why do people prefer decrypted roms, what is the advantage?
Click to expand...
Click to collapse
One reason should be faster "iops" I presume.
Skickat från min Nexus 6P via Tapatalk
That was fast, OP your pic looks alot like this dude.
Hm okay I see, thanks.
Can I encrypt it again if I want to?
Also I thought the Source of Android N is not released yet (delevopers.google.com) so where is this source from exactly?
.. Okay I just looked it up. So is there a difference between this one and the official OTA update? I really want to flash another ROM because my Dirty Unicorn is just a mess at the moment.
Iceburn1 said:
That was fast, OP your pic looks alot like this dude.
Click to expand...
Click to collapse
Oh wow! I've never seen that guy around the forums, but you're right!
rest0ck said:
Why do people prefer decrypted roms, what is the advantage?
Click to expand...
Click to collapse
Faster boot, slightly faster I/O (although there isn't too much of a difference).
Thank you for the answer.
Can someone confirm that flashing the lastest SuperSU beta works? http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
So basically flashing this ROM + Vendor + ARM64 GApps + SuperSU = Android N, decrypted, rooted, with gapps?
How'd you even build this? I synced r1 and tried a build last night and it wouldn't build (for the 6p). The website doesn't show 6p as included in r1 yet
rest0ck said:
Thank you for the answer.
Can someone confirm that flashing the lastest SuperSU beta works? http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
So basically flashing this ROM + Vendor + ARM64 GApps + SuperSU = Android N, decrypted, rooted, with gapps?
Click to expand...
Click to collapse
The latest Beta SU works with 7 NRD90M
rest0ck said:
Thank you for the answer.
Can someone confirm that flashing the lastest SuperSU beta works? http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
So basically flashing this ROM + Vendor + ARM64 GApps + SuperSU = Android N, decrypted, rooted, with gapps?
Click to expand...
Click to collapse
Not really, no. The ROM isn't technically decrypted at all. It just doesn't force encryption. So if you were encrypted prior to flashing you would still be encrypted. The only way to decrypt is to format userdata. The advantage of a ROM not forcing encryption (or being incorrectly labelled as decrypted in this case) is that if you were previously decrypted the kernel won't encrypt your storage on the first boot.
Update: 10/26/2017 I am moving any further development of Ghost Project Roms to Google Plus Community here
https://plus.google.com/communities/101940281883070515657
I have a non rooted build on my Google Plus community. I left it non rooted so you could use Substratum for Samsung. If you want root just flash Magisk 14.3.
Links are also in the 3rd post. But I am only doing questions from Google Plus.
*******I highly recommend that you run my first build V.1 as it is the best of all of the builds and has the best battery life. But for those of you that really need that security update, I will continue on and try to get this tho run at least to my expectations. Once there, I will re-post the link after it is running better.
The download links and further information are in the second post. http://forum.xda-developers.com/showthread.php?p=70332239
[Rom] [Stock] [Rooted] [Deodexed] [Debloated] [TWRP Flashable Zip] [SM-T350]
I am not a developer. I am an Android enthusiast who, with the help of a few awesome tools, some reading and from a couple of great devs, I was able to build a custom rom from a stock firmware release.
I have been running it now for about 3 weeks and battery life is awesome. I left in just enough Samsung apks too call it a stock rom but not so many to cause it to lag.
I thought that since it was running so nice, I would share it with you. So, without further ado, this is "Ghost Project" rom for the Galaxy Tab A SM-T350 made from (T350XXU1BPE3) stock firmware.
Thanks To:
II am not a developer..... Let me make this clear.. Lol.. I am not a developer. But I did use an awesome tool that allowed me to make this rom "SuperR Kitchen" .... http://forum.xda-developers.com/chef-central/android/kitchen-superrs-kitchen-t3202296/page26
So first and foremost a big thanks goes out to this developer for this awesome tool.
I would also like to give props to Samsung and Sammobile.com for the firmware.
The kernel is from http://forum.xda-developers.com/galaxy-tab-a/development/kernel-galaxy-tab-sm-t555-5-8-2016-t3433560 and is a stock, permissive kernel. By "[ashyx, http://forum.xda-developers.com/member.php?u=4899305 Recognized Contributor]" another awesome dev. This is a stock kernel in every respect with SElinux set to permissive. Please make sure to stop by and thank him as he does some brilliant work and if you like his work dont hesitate to donate to him. This is our only custom kernel for this tablet. Thank you sir for your awesome work.
I would also like to thank and give props to"{FankieT} of {R3Ds themes and Development}" https://plus.google.com/communities/102477541363210451018 for all of his help and guidance. He was who got me started into Linux through Ubuntu and spent many hours teaching this old dog the ways of Android development. You can teach an old dog new tricks..lol
Big thanks to "[ @cbtc https://forum.xda-developers.com/member.php?u=7546403 ]" for his help with some knox questions related issues.
Rom Details:
Use at your own risk. ********You have been warned..*********
Features:
1. Rooted
2. Busybox installed
3. Debloated
4. Zip aligned
5. Deodexed
6. Removed Kies
7. Permissive stock kernel
8. Knox removed
9. Added ES File explorer
10 .Added Nova Launcher
11 .Latest Google Keyboard
And a few other small changes here and there but basically a stripped stock experience.
Kernel:
Here is a link to the kernel developer's thread, who is another awesome dev, who's kernel is the heart of this rom.
http://forum.xda-developers.com/gal...el-galaxy-tab-sm-t555-5-8-2016-t3433560/page8
By "[ashyx, Recognized Contributor]" This is a stock kernel in every reguard with SElinux set to permissive.
A few other small things here and there but mostly stock.
-This is a flashable zip using TWRP recovery and I highly recommend the 2.8.7.0 build as apposed to the 3.0.2.0 build. That is what works for me, your device may like the newer build of TWRP though.
Link to recovery built by "ashyx" an awesome dev...
http://forum.xda-developers.com/galaxy-tab-a/development/recovery-t3426560/page13
-Since this is a stock rom build, gapps are included so no need to flash any gapps.
#####Flashing instructions#######
###MUST BE ON MARSHMALLOW BUILD ****T350XXU1BPE3******#######
So, if you are on a lollipop build (5.0.1) you need to update to 6.0.1 and have TWRP installed........
1. Make a backup onto your external SD card or on a PC using TWRP recovery. This is a very important step as things do go wrong. You have been warned.
2. Wipe. I recommend a clean install with all 4 major wipes done (system, Cache, Dalvik Cache and Data)
3. Flash "Ghost Project v1.0 6.0.1 t350" rom zip.(or which ever one you decide from the list)
4. Wipe both Cache and Dalvik Cache
5. Reboot to system and profit.
The first boot will take a long time to boot. Put the device down and walk away until it boots (could take up to 15 minutes ) but most likely around 7 to 10 minutes. That is because all files are deodexed.
After it boots up Go ahead and set up the device the way you like it and enjoy.
I also have a Google Plus Communitee Called "Hayes Tech Rom Reviews" where you can go to watch reviews/overviews of custom roms for many devices that I own. I have about 20 to 25 devices now and try to do reviews on all the diferent roms out for them. I also have awesome links like the 3Minit battery mod by{made by "gharrington"} for the Nexus 6 and many more things. Please feel free to stop by.
https://plus.google.com/communities/109262972011341635244
**LAST BUT NOT LEAST****USE AT YOUR OWN RISK**
Warning, I am not a developer. All I am doing is sharing my personal build. I am not nor will I be responsible for anyone ruining your device. Thermonuclear war or Loss of job from device not working is your responsibility. And above all this zip will void your warranty.
I can't think of anything else..lol.. This is the first for me so be easy on me. I am going to try to add more custom features and may even add a pure stock rom for total stock experience, let me know... Enjoy.
A video review of my rom... Go here if you would like to see it
https://youtu.be/dVnx709LO7Y
I built another rom for those that want the stock experience but still want it rooted and Knox removed. It is also Zip Aligned and is running the same permissive kernel for Xposed Mods to work better with it. Knox was removed but it is still in the settings menus. I will fix this soon and up!oad another build with that fix.
All downloads with pefix (v.X) are build from same firmware T350XXU1BPE3 When Samsung releases another update the prefix will change to (v1.X).
Download Rom (AFH)
Ghost Project v.1 6.0.1 t350
https://www.androidfilehost.com/?fid=673368273298916139
Ghost Project v.2 6.0.1 t350
https://www.androidfilehost.com/?fid=457095661767126203
Ghost Project v.3 6.0.1 t350
https://www.androidfilehost.com/?fid=457095661767126654
Ghost Project V1.2 6.0.1 t350 Built with latest update T350XXU1BPK2/T350XAR1BPK2
(Comming)
Stock/Rooted/No Extra Apps Added (Stock Samsung Experience)
https://www.androidfilehost.com/?fid=385035244224406713
Stock Firmware flashable with Odin
https://www.androidfilehost.com/?w=files&flid=154234
Xposed Installer Zips (For Samsung Devices) By[" http://forum.xda-developers.com/member.php?u=3562083 "] wanam, Recognized Contributor. You can find his thread here
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Here is my favorite source for custom wallpapers. There are an awesome assembly of some of the best wallpaper designers around.
https://plus.google.com/communities/117666521324982773368
"Chance Favors the Prepared"
Update build: 02-14-2017 Ghost Project V1.2 SM-T350 6.0.1 Built from the Sammobile.com firmware update T350XXU1BPK2/T350XAR1BPK2 with the November security update. This is the latest USA update that I can find. You must be on the T350XAR1BPK2 stock firmware ( flashed with Odin) before flashing this rom. I used TWRP 3.0.2.1 by " @ashyx "
Link to TWRP 3.0.2.1 @ashyx" The builder of this recovery. Make sure to thank him because with out this recovery, we have no way to flash our customs roms with.
http://forum.xda-developers.com/showthread.php?t=3426560
AFH Download link for Ghost_Project_V1.2_SM-T350_6.0.1
https://www.androidfilehost.com/?fid=673368273298931785
To install: you must be on Firmware package T350XXU1BPK2 before flashing this rom. This is the firmware link
https://www.androidfilehost.com/?w=files&flid=154234
You need to install the firmware (unless you are already on this build) with Odin.
Then install TWRP 3.0.2.1 ****DO NOT LET TWRP INSTALL SUPERSU********
Then wipe system, cache, delvic cache and data.
Flash Ghost Project V1.2 SM-T350 6.0.1
Boot to system and enjoy.
After first boot to can flash the "Wanam version of Xposed" in TWRP if you want to use the installed Xposed installer app that I included with this rom.
links to this zip are in the first post.
Do not use any advanced reboot apps to boot to recovery. This may or may not cause you to get stuck in recovery and will not let you boot to system. If this happens to you, don't frett, just power off the device, push power+volume down+home and boot to "Download Mode". Once device load Download screen, press volume up to enter Download mode and plug in the device to your PC. Open Odin and flash TWRP again with auto reboot ticked on in options tab. Your device will then boot to system, after done flashing TWRP. The flags should now be reset to kernel again and you should be good to go once again.
I'm not sure why it does this but it only does with the 3.0.2.1 version of TWRP for this device. The Lollipop version I have had no issue with. But I had issues trying to flash this rom with the older TWRP so I used the 3.0.2.1 version.
If you don't want the Xposed app, just install your favorite system app remover and uninstall it. I use the app so that is why I pre installed it for you all.
The kernel in this rom is pure stock that was supplied in the firmware update. So the kernel source is plain stock Samsung. I tried @ashyx" permissive kernel http://forum.xda-developers.com/showthread.php?t=3433560 with this build and couldn't get my device to boot. Your device may fair better. If it dies with for you, be sure to head over to his thread and give a small donation or at the least thank him.
*****UPDATE*****
Updated to April security patch. Must flash the stock firmware first via Odin. Then re-flash TWRP via Odin. Make sure when flashing TWRP that you have auto reboot turned off in Odin options. After TWRP flash is done, hold Home, volume up and down, and power button till device powers off. Keep holding all buttons except for the volume down and once the device comes to life, let go of the power button and after about 1.5 seconds let go of the jome and volume buttons. You should then boot into TWRP.
I I highly recommend that you do not use any apps to reboot to recovery or you could go into a recovery loop. If that happens you need to reflash TWRP via Odin following the instructions provided above.
This rom is prerooted so you do not have to flash superSu. Also, you need to give it at least 10 to 15 minutes for the first boot.
Have fun and as always this is as is and use at your own risk.
Sorry all, I pulled the build until I can get it running a little smoother. If I don't like the way it runs than I'm not going to give it out to others
I am leaving the firmware link up in case you want to update to the newest build through Odin though but it is unaltered and is straight samsung with no root. Completely stock and not flashable with TWRP.
As soon as I get it running smoothly, I will post the link again
Stock firmware: XAR-T350XXU1BQD1 must flaw using Odin (not a TWRP flashable zip) (completely stock with stock recovery)
https://www.androidfilehost.com/?fid=745425885120730076
md5 75a628efc51737cb328207cadd7977a2
GhostProject_v5.0_ SM-T350_6.0.1 (will repost link once it is running better)
"Chance Favors the Prepared"
GhostProject SM-T350 7.1.1 (stock) (debloated) (knox removed) (zipaligned) (non rooted) (T350XXU1CJ1_XAR)
Again, let me make this clear because the is this one dude it there accusing me if stealing from Samsung. I am not a developer. This is a TWRP flashable stock firmware update to 7.1.1 (latest release). All I did (for now) was to lighten the app load and allow it to be flashed via TWRP. I will be trying to deodex it and strip it even more as time goes on.
All my Thanks goes out to all the same people as in the first post. This is something anyone could do as long as you are running a Linux distro, have some basic rom construction knowledge and a ton of patience. I used @superR kitchen to do this with too. Here is his work and I highly recommend the donate download as the tools include helps a pile.
https://www.google.com/amp/s/forum....android/kitchen-superrs-kitchen-t3202296/amp/
I left root out because a lot of you don't use root for various reasons. If you want root, flash Magisk 14.3.
Must be on the stock firmware (flashed via Odin) first, them but to system. After you boot to system and unlock developer options and USB debugging, boot into bootloader mode again and install TWRP via Odin. In Odin options uncheck "auto reboot to system" when the recovery is done flashing (takes about 1 second) reboot into recovery from the download screen. That locks in TWRP recovery.
You can now make a backup and then flash GhostProject and Magisk 14.3 (if you want root). I will be working on this to trim it down the way I like it but if you like it close to stock than v5.0 if the rom you need.
I will not support questions here. Hi to my Google Plus community for that.
AFH link to stock firmware (T350XXU1CJ1_XAR)
https://androidfilehost.com/?fid=745849072291683960
AFH link to GhostProject SM-T350 v5.0
https://androidfilehost.com/?fid=673791459329056605
"Chance Favors the Prepared"
Palpal link
For those of you that want to make a small donation, I have decided to post my Paypal.me link. It was requested by a few of you and thank you much to those that have donated. Now, donations are not expected or needed to use anything I make and post to the public. But because of my situation lately I decided to go ahead and publicly post this link. Thank you in advance.
https://www.paypal.me/Glockman4519
"Chance Favors the Prepared"
glockman4519 said:
Some screens
Apparently, A there is something up with XDA's servers because I can't seem to get these screen shots uploaded. I will post a Google Drive link with them so you can see them if you want.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5bS1uR3dySExPODg
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the updated version of Ghost SM-T350 rom but can you upload v2 on Google Drive? Apparently, I can't access AFH on my school laptop as they have blocked it as a local block website. So if you can upload Ghost v2 on Google Drive by tonight or tomorrow, I would appreciate it.
Thanks.
New update to my Ghost Project builds of stripped down stock firmware. I have stripped it about as far as I am going to go with it so the rom stays dependable. I also removed the ES File Explorer and Nova Launcher apks. I left in the Google Keyboard though as I think it is just a better keyboard.
I am going to build one with root as systemless next for those seeking that want root that way.
AFH download links in the OP.
"Chance Favors the Prepared"
ParadoXGodzillA said:
Thanks for the updated version of Ghost SM-T350 rom but can you upload v2 on Google Drive? Apparently, I can't access AFH on my school laptop as they have blocked it as a local block website. So if you can upload Ghost v2 on Google Drive by tonight or tomorrow, I would appreciate it.
Thanks.
Click to expand...
Click to collapse
Here is the link to my Ghost Project Google Drive shared folder. It has v.1 and v.3 in it.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
"Chance Favors the Prepared"
glockman4519 said:
Here is the link to my Ghost Project Google Drive shared folder. It has v.1 and v.3 in it.
https://drive.google.com/folderview?id=0ByTpk6hgHRa5X3g5VnBVam9OaDQ
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks.
@glockman4519 I just wanted to take a minute and say thank you so much for this ROM. I appreciate all your hard work. I am so happy to FINALLY find a ROM with bloatware removed and with awesome battery life. My deepest thanks to you. I will follow this thread for any updates. Keep up the GREAT work!
alias4ever said:
@glockman4519 I just wanted to take a minute and say thank you so much for this ROM. I appreciate all your hard work. I am so happy to FINALLY find a ROM with bloatware removed and with awesome battery life. My deepest thanks to you. I will follow this thread for any updates. Keep up the GREAT work!
Click to expand...
Click to collapse
You are very welcome. I'm glad that it is working out for you.
glockman4519 said:
You are very welcome. I'm glad that it is working out for you.
Click to expand...
Click to collapse
It is working very well and after a few days use of it I can't believe the battery life on this ROM! WOW! A HUGE thumbs UP! :good::highfive:
Installation?
Hey,
I tried to flash it and nothing happened, operator error I believe . Does the build have to be T350XXU1BPE3 or can it be an updated Marshmallow build? Like to flash your V.3 could I have the latest firmware or would I have to flash (odin) that specific build?~Thanks, C
Edit: I beat you to it, I read the first couple of paragraphs at the beginning of you OP again. You clearly said it was built from/for T350XXU1BPE3. Sorry for breaking my own rule...
ConnerJSP said:
Hey,
I tried to flash it and nothing happened, operator error I believe . Does the build have to be T350XXU1BPE3 or can it be an updated Marshmallow build? Like to flash your V.3 could I have the latest firmware or would I have to flash (odin) that specific build?
~Thanks, C
Edit: I beat you to it, I read the first couple of paragraphs at the beginning of you OP again. You clearly said it was built from/for T350XXU1BPE3. Sorry for breaking my own rule...
Click to expand...
Click to collapse
No need for apologies. I'm not a dev and don't mind questions. But as you found out, you do need to have the latest or the firmware that I posted, already installed via Odin. It's a Samsung thing. Lol... Hope v3 is working good for you. : )
glockman4519 said:
No need for apologies. I'm not a dev and don't mind questions. But as you found out, you do need to have the latest or the firmware that I posted, already installed via Odin. It's a Samsung thing. Lol... Hope v3 is working good for you. : )
Click to expand...
Click to collapse
Yes I did find out. So I successfully flashed it and it is really great work, nice job! My only concern is the outdated android security patch level, which is to be expected since the ROM is based off an old build. Do you have intentions on updating that?
ConnerJSP said:
Yes I did find out. So I successfully flashed it and it is really great work, nice job! My only concern is the outdated android security patch level, which is to be expected since the ROM is based off an old build. Do you have intentions on updating that?
Click to expand...
Click to collapse
As soon as Samsung releases a security update. You know how Samsung is with updates.
I also have a build with Magisk systemless root that I will upload later. If anyone wants to use Magisk as apposed to SuperSu
glockman4519 said:
As soon as Samsung releases a security update. You know how Samsung is with updates.
I also have a build with Magisk systemless root that I will upload later. If anyone wants to use Magisk as apposed to SuperSu
Click to expand...
Click to collapse
When I flashed the V.3, I recall it having May 1, 2016 patch level. The latest update has November 1, 2016. Is that what you mean, or some source code they haven't put out yet? And I looked up what Magisk s but didn't really understand it... What would be the advantages of using it over SuperSU?
Edit: I just reflashed V.3 and noticed that it was using the build one of your ROM and the installer for Ghost Project v1 6.0.1 installer. Is this using the wrong version or is that supposed to say that? (See photo)
Update: Well, confirmed build is V.3. Must have just been displayed incorrectly. Nonetheless, working flawlessly.
ConnerJSP said:
When I flashed the V.3, I recall it having May 1, 2016 patch level. The latest update has November 1, 2016. Is that what you mean, or some source code they haven't put out yet? And I looked up what Magisk s but didn't really understand it... What would be the advantages of using it over SuperSU?
Edit: I just reflashed V.3 and noticed that it was using the build one of your ROM and the installer for Ghost Project v1 6.0.1 installer. Is this using the wrong version or is that supposed to say that? (See photo)
Update: Well, confirmed build is V.3. Must have just been displayed incorrectly. Nonetheless, working flawlessly.
Click to expand...
Click to collapse
I never got around to changing the info in the build prop. V3 is just the latest in evelutions of my builds. It is still same firmware base as V.1 when I see a later version of samsungs firmware build showing, I will update this and the build number system will change to v1.1. As for Magisk, it was requested by a few people and from what I was told, they were having issues getting it to work with this tablet. I got it working. It still does not pass safety net though. I dont think it is going to that easy to byoass the safety net and still be rooted.
All my rom does is take the stock firmware and reliably debloat it enough to give you an outstanding battery experience. Thats it. There were no custom roms out for this device, when I started this project, and that is the only reason that I am sharing this. There is another great rom out now called "Fenix rom" so maybe I will see where his rom goes. It looks good.
As I stated earlier. i am not a developer. I understand a lot that goes into a rom and how to get it. But I am basing my builds on firmware releases from Samsung and untill Samsung releases another update, my hands are tied.
Thank you for the feedback.
"Chance Favors the Prepared"
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?Cheers, CJSP
ConnerJSP said:
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?Cheers, CJSP
Click to expand...
Click to collapse
Not yet mate. I'm trying to find a workaround for this. There might be other posts on XDA that might help you.
ConnerJSP said:
Hey,
I'm looking forward to the inclusion of Magisk, I'm currently using a custom ROM that has it preinstalled. Wasn't sure how to use it at first but I see it mainly as an all around manager, and acts likes Xposed with the modules.
With that said, will you be using Chainfire's SuperSU or phh's superuser for the root (systemless?)?Cheers, CJSP
Click to expand...
Click to collapse
I tried several times, several different ways but still can't get it to install on the initial install. This is more than my skills can figure out...Lol... I'm done with Magisk for a while on this device. It's an issue in the installer script I think.
"Chance Favors the Prepared"
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 10.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 10.0 DBT XXU3BTK1 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v4.0
Rebased to XXU3BTK1 Android 10.0 (Security Patch from 01.11.2020)
Hopefully Fixxed Bluetooth-Probleme - Should work witout BT Patcher.
Changelog v3.1
Fixxed bluetooth-probs
Patching of bluetooth didnt work anymore, so you have to use now Bluetooth Library Patcher as Magisk Modul, otherwise you lose every reboot your bluetooth connections
Changelog v3.0
Rebased to XXU3BTH4 Android 10.0 (Security Patch from 01.09.2020)
Changelog v2.0
Rebased to XXU3BTFN Android 10.0 (Security Patch from 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Changelog v1.0
Initial Release
Rebased to XXS3ATE3 Android 9.0 (Security Patch from 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself
Alternatively i can provide the patched TWRP see latest twrp file above
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Q 10.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Troubeshooting
If you got an bootloop or it stays on samsung logo, make a fullwipe. Otherwis it wont boot correctly into root partition.
I had the same problems. Only a fullwipe solved it.
Credits
Samsung
topjohnwu
MrWaehere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 10.x Q
Version Information
Status: Stable
Current Stable Version: 30.08.2020
Created 2020-06-01
Last Updated 2020-09-29
hanspampel said:
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 9.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 9.0 DBT XXS3ATE3 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v1.0
Initial Release
Rebased auf XXS3ATE3 Android 9.0 (Security Patch vom 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself, alternatively I can provide the patched TWRP.
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Pie 9.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Credits
Samsung
topjohnwu
MrWhaere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Current Stable Version: 01.06.2020
Created 2020-06-01
Last Updated 2020-06-01
Click to expand...
Click to collapse
MOD EDIT : No need to quote the ENTIRE first post ...
Does this rom lag or feel sluggish to you?
Sent from my SM-T510 using Tapatalk
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
klemen241 said:
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
Click to expand...
Click to collapse
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
zfk110 said:
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
Click to expand...
Click to collapse
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
klemen241 said:
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
Click to expand...
Click to collapse
What about if you play games? like Pokémon go will it runs hot??
zfk110 said:
What about if you play games? like Pokémon go will it runs hot??
Click to expand...
Click to collapse
I only use it for Netflix, so no idea. I think it's safe
hanspampel said:
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
Click to expand...
Click to collapse
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
zfk110 said:
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
Click to expand...
Click to collapse
no.. safetynet now does hardware checks
Update to Q-based BTFN FW.
Changelog v2.0
Rebased auf XXU3BTFN Android 10.0 (Security Patch vom 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Read Troubleshooting in OP!
Thanks for the update.
I am currently using your v1.0 (Android 9).
To update to v2.0 (Android 10) i have to flash stock rom XXU3BTFN first and repeat the procedure to patch TWRP, flash TWRP, flash multidisabler ...?
does the rom work with the T510N version also?
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
hanspampel said:
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
Click to expand...
Click to collapse
from what i have read it has 3GB instead of 2GB ram and 64GB instead of 32GB storage.
I think the rest of the internal components are the same.
It is the wifi(T510/T510N) version and not the LTE(T515/T515N)
Hmm try it out if you want. I don't guarantee it will work. If so, it could be that it show not the correct Infos about your tab, ram, emmc etc.
@seppfx
You can push the twrp inside the AP_ file, delete recovery.img and rename twrp to this one. So you don't have to format Data again.
I'm on Android 10. And as you know that TWRP version is T510XXS3ATE3 and TWRP is still not available for T510XXU3BTFN So how am I suppose to do all these stuffs. Can I flash your file through TWRP on Android 9 ?
Please clear my doubts.
No, you must be on android 10, as i said before. Flash Magendanz TWRP. There is a q twrp in his thread.
Can you please post a link of that TWRP ? I'm unable to find that.
Take a look at here.