Hi everybody,
I follow all the steps described on the different tutorials, but my Galaxy Mega is still bricked.
I can't explain how, but my Mega is hard bricked, black screen and nothing else.
I downloaded the debrick.img file from this link : Oc0UlrxRIjY (Youtube video)
I mount it on the SD card through Win32DiskImager. I also dowloaded the firmware I9205OXXDOA1_XEF from Sammobile (4.4.2 Kit-Kat).
When I insert the SD card in the phone, it seems to be in Download mode :
Code:
ODIN MODE
PRODUCT NAME: GT-I9205
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER AP SWREV: 2
WRITE PROTECTION: Enable
And at the center of the screen :
Code:
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
So I tried to use the Kies recovery tool but it fails quickly.
I tried with Odin (v3.07, v3.09 and v3.10.6), but it also fails :
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9205XXUDOA1_I9205OXXDOA1_I9205XXUDOA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Write)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone, a line appears :
Code:
ODIN: flash write failure
I don't know what to do more.
Thanks for your help.
You need a debrick image from someone using the same firmware or you need to flash the same firmware that was used to create the debrick image.
Silesh.Nair said:
You need a debrick image from someone using the same firmware or you need to flash the same firmware that was used to create the debrick image.
Click to expand...
Click to collapse
Thank you but the firmware on the Mega was KitKat, and the debrick.img comes from a 4.4.2 firmware.
I remember that the first time I inserted the SD card in the Mega, it was written :
Code:
[COLOR="Red"]Could not do normal boot.[/COLOR]
Then it never appeared again.
Anyone knows what can I do more please ?
I tried with an other computer, different usb ports, again and again, and now Odin is stuck with "Initialzation.."
Related
Hi, I was trying to upgrade my Samsung Galaxy S3 i9300 ; firmware version 4.1.1 to 4.3
On my first attempt I used:
* I9300XXUGMK6_I9300OXXGML1_I9300XXUGMK6_HOME.tar
* Odin 3.07
I turned my phone off, then I went to Download Mode (power + volume down + home buttons), opened the Odin 3.09, opened the tar file on the PDA, ticked F Reset and Auto Reboot and start!
After this odin finished as:
Complete(write) operation failed! ...
On the download screen this is the following information:
Product Name: SGH-I747
Custom Binary Download: Yes (8 counts)
Current Binary: Custom
System Status: Custom
Qualcomm Secureboot: Enable
Unsupport Dev_Type
As you can see the product name is different now. But it is an i9300 as i confirmed on settings before upgrading (and on the battery slot).
I have tried with 2 or 3 differents firmwares and it keeps giving the same error.
Phone will not show Samsung Logo right now, it shows: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Kies does not detect the phone, but the pc and odin does.
Please help.
If it's really a i9300 then it should just be a matter of flashing the right file.
Please try this german 4.3 ROM: http://goo.gl/aJMX7K
If it doesn't work find a threepart-firmware for i9300 (with PIT-file included) and flash it.
Still presenting the issue
Benko111 said:
If it's really a i9300 then it should just be a matter of flashing the right file.
Please try this german 4.3 ROM: LINK ABOVE..
If it doesn't work find a threepart-firmware for i9300 (with PIT-file included) and flash it.
Click to expand...
Click to collapse
Hi, thanks for your response! This was my destiny:
<ID:0/ 004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300DBTGMK2_ I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot. img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On device:
Product name: sgh-i747 (Probably this is what is causing this issue, but it is a i9300)
Unsupport dev_type
I'll still look for more softwares !
re
Ovejox said:
Hi, thanks for your response! This was my destiny:
<ID:0/ 004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGMK6_I9300DBTGMK2_ I9300XXUGMK6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot. img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On device:
Product name: sgh-i747 (Probably this is what is causing this issue, but it is a i9300)
Unsupport dev_type
I'll still look for more softwares !
Click to expand...
Click to collapse
Hi. Try chimera tools and flash rom.
I'm beginning to suspect you are on commission for chimera...
It looks like the op flashed a firmware for the i747, try the rescue firmware from general forum else a repair centre.
Sent from my GT-I9300 using Tapatalk
That would definitely be my next step as well. Try the 3-part rescue firmware with PIT.
What do you mean on device it says SGH-i747? Where on device, when it trys to boot? That's from the incorrectly flashed firmware but
should normally be overwritten by the correct firmware without problem.
Again, if you're positiv it really is a i9300 the rescue firmware should do:
http://direct.xda-developers.com/showpost.php?p=30087735
You do need to ensure you get the correct firmware and to do this you need Kies to work.
Uninstal Kies then download Kies and install again, download the 4.3 version, then start Kies go to tools and select the Firmware Upgrade and Installation, follow the instructions, hopefully for you it will see the phone, following the process should wipe the phone and install the correct firmware for it, once this is done the phone should boot up, after that you should have a working phone.
Seems very odd your phone shows i9300 in the About Phone and under the battery but not when you go into download mode it shows the US / Canada phone model.SGH-i747
Hi
Please can someone help me??
I downloaded this file (canada version of lollipop for SM-P900):
http://www.sammobile.com/firmwares/download/53868/P900UEU1COH2_P900XAC1COH2_XAC/
I used Odin 3.09 to try to install the file, and it said failed. Now when I try to power it up I get "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again".
When I connect it to Kies, Kies says it's not a compatible device. I know it is though, because I successfully connected in to Kies before I started doing all this.
I can still however enter download mode, but can't enter recovery mode (Power + Vol up + Home).
Thanks a lot
On the tablet screen, in download mode, it says:
ODIN MODE
PRODUCT NAME: SM-P900
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
Secure Download : Enabled
KNOX WARRANTY ISSUE VOID: 0 (0x0000)
AP SWREV: A1
The message I get in Odin is:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P900UEU1COH2_P900XAC1COH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you
I used Odin to flash back to the UK version of kitkat from Sammobile with no problems...
Any idea, from the Odin info, why the other one didn't work?
Thanks
Another update for anyone that's reading this/interested....
The Netherlands version of lollipop worked (http://www.sammobile.com/firmwares/download/49414/P900XXU0BOF2_P900OXA0BOF2_PHN/).
The canadian one didn't, no idea why...
I hope I am in the right section the structure of the forum seems to have changed on me or something.
I have gotten frustrated at this point and do not even remember the entire process that has got me this far.
I am not new to rooting as I have rooted maybe 10+ phones all using the xda forum. I just do not trust any other site. This does not mean I am claiming to be a pro. I just know how to follow directions and always try to have a backup before I even get started.
Anywho to the best of my recollection I started with this guide: [ROOT][Samsung Galaxy Tab E][sm-t377p/sm-t560nu]
When I started root I had Marsh 6.0.1
I don't think I ended up rooting using that exact method, or if i did the tablet wouldn't start up but it had twrp.
Somewhere in between my tablet had twrp and I used the backup that was given by @shawn1976 for the system, boot and modem.
The tablet worked but the wifi was refusing to turn on. I searched and searched and couldn't fix the problem and so I think at that point I decided to try and maybe flash the 6.0.1 that it had originally had on it and worse case scenario I would just end up where I started nothing lost.
Anyhow at this point I have TWRP 2.8.7.0 and it gives error that zip file is corrupt on the 6.0.1.
and using odin it just gives:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
When I try to restore the @shawn1976 Backup now it doesn't show anything in the list below [ Select Partitions to Restore] list.
when i first started i took note of the OEM Unlocking steps and made sure it was on, but am wondering now after it got reflashed was I supposed to redo that step again before trying to reflash?
I have no backup and I'm wondering what to do at this point. I tried looking for a solution hoping I could avoid posting like a nub about my problems. Any help you guys could give me would be appreciated.
so brief description is:
Galaxy Tab E sm-t377p (sprint)
Tablet doesn't boot up just goes straight to recovery.
TWRP is 2.8.7.0
And no partitions show up for restore in twrp for what was supposed to be my backup @shawn1976's Backup )
is it fixable?
In download mode it says:
ODIN MODE
PRODUCT NAME: SM-T377P
CURRENT BINARY: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (2)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD : ENABLE
S8Gonzo said:
In download mode it says:
ODIN MODE
PRODUCT NAME: SM-T377P
CURRENT BINARY: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x1 (2)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, H1, R1, A2, P1
SECURE DOWNLOAD : ENABLE
Click to expand...
Click to collapse
If you have the T377P use the firmware from SamMobile to unbrick your device.
https://www.sammobile.com/firmwares/database/SM-T377P/
I tried downloading it twice and twrp doesnt like it. It errors with [ zip file is corrupt] or just restarts twrp.
I'll try a 3rd download.
I have a twrp version 3 in my device which is running on android 5.1.1
I think the problem is with your recovery , 2.8.7.0 is too old to run new binaries maybe?
Try installing latest version of Philz for your device.
Happened with me before when i had a mtk kitkat device and when i tried to install a lollipop rom using an old twrp recovery.
Fixed it by upgrading to traditional cwm-philz
S8Gonzo said:
I tried downloading it twice and twrp doesnt like it. It errors with [ zip file is corrupt] or just restarts twrp.
I'll try a 3rd download.
Click to expand...
Click to collapse
That's because you need to unzip it and flash the md5 with odin not twrp.
ashyx said:
That's because you need to unzip it and flash the md5 with odin not twrp.
Click to expand...
Click to collapse
They were all giving me errors. The flash image with odin and the twrp backup. After a bunch of troubleshooting it turns out my microSD card was the problem. It started giving me errors in windows so i reformatted and put all the files back. Then I reflashed the twrp backup and its able to boot up.
The problem is back to wifi switch flipping off as soon as i turn on. Im guessing it doesnt like the modem flash.
I keep trying to download a diff version of stock rom but I can't keep connected. It's a poopy line i have.
anywho I tried to install the stock rom I did manage to download and I get:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried a few versions of odin, same result.
Please help me, i have a hard bricked SM-T377P, if you have one in hands you can help me to unbrick mine, it will take only 2 minutes! Here is my thread: https://forum.xda-developers.com/android/development/help-sm-t377p-hard-bricked-debrick-img-t3711889
Thankssssssss!
can I hide tethering with out root on this device
I got samsung I337 fully working phone and it had only one problem that it did not let us to select network mode and i tried to reflash the phone but stuck at " Firmware upgrade encountered an issue and flashing always failed.
In Download Mode it shows these things
Odin Mode
Product name: SGH-I337
Current Binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warrenty Void: 0x0
CSB-CONFIG-LSB:0X30
Waite Protection: Enable
eMMC Burst MODE enabled
So then i tried the odin method and downloaded both the 1337DB and DL file and tried running them in Odin. Odin fails and shows this in the messages:
I already tried with NCB1 firmware but its gives error at system file with pit and without pit.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this occurs whether i check the boxes or not and if i add a pit file or not. Then on my phone it says in red, " SW REV. CHECK FAIL: fused:4, Binary 1".
Need perfect solution for it please help.
Following. I have the same situation.
kuljindersaini said:
I got samsung I337 fully working phone and it had only one problem that it did not let us to select network mode and i tried to reflash the phone but stuck at " Firmware upgrade encountered an issue and flashing always failed.
In Download Mode it shows these things
Odin Mode
Product name: SGH-I337
Current Binary: Samsung Official
System Status: Custom
Knox Kernel Lock: 0x0
Knox Warrenty Void: 0x0
CSB-CONFIG-LSB:0X30
Waite Protection: Enable
eMMC Burst MODE enabled
So then i tried the odin method and downloaded both the 1337DB and DL file and tried running them in Odin. Odin fails and shows this in the messages:
I already tried with NCB1 firmware but its gives error at system file with pit and without pit.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
this occurs whether i check the boxes or not and if i add a pit file or not. Then on my phone it says in red, " SW REV. CHECK FAIL: fused:4, Binary 1".
Need perfect solution for it please help.
Click to expand...
Click to collapse
If I understand you, U've tried two different firmware and they fail at different lengths.
Okay try flashing any custom recovery, I'd prefer Twrp. Try booting to recovery. If it boots lemme know.
It is not possible to install TWRP on the AT&T i337 S4.
Are you sure? I'm pretty sure there's a twrp recovery for the i337 except u are not keen with the search button. Im not sure if I'm allowed to post links, so I'd suggest you search through google u are sure to get one.
Oh, I'm familiar with the search function. I've been searching special topic forums ever since forums were created years ago. Newer bootloaders for the i337 are locked down solid. I think I would pee myself for joy if someone came up with a way to load a custom recovery for the i337 with the OK3 build. From what I get, there's nothing you can do once you have NB1 or newer.
OK if that's the case, get a mk3 rom, unpack the tar and remove the aboot file, (if it's a 4file repair fw, just don't add the aboot.) decompress the mk3.tar with 7zip remove the aboot repack it and flash via Odin.
After I rooted my device running Android 7.0, it got stock in a bootloop once rebooted. I have tried to flash different stock ROMs on this device from Samsung so I can recover my phone. Each firmware is an official firmware from Samsung, but all gives the same error when flashing through ODIN.
I have spent over 8 hours on different forums and I haven't found a fix for this. At this time I believe my device is hard bricked, because I have found other issues with the boot.img fail, but this one is for sboot.bin for the Galaxy S6 Edge SM-925i.
I need help please, has anyone found a way to flash and find a workaround for that sboot.bin fail in ODIN?
I already tried to flash other firmwares for the model SM-G925F and for SM-G925A, and they aren't compatibles at all.
Below are the logs from ODIN, regardless of what version of ODIN I use when flashing.
-------------------------------------------------------------
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1301)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 3727 M
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
----------------------------------------------------------------
Here is the logs from my phone after a failed flash:
----------------------------------------------------------------
ODIN MODE
PRODUCT NAME: SM-G925I
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWAEV: B: 4 K :2 S:2
SW REV. CHECK FAIL. DEVICE: 4. BINARY: 3
By the way: Here is a video with the exact error that I posted here. https://youtu.be/N2XoFN4UTns
:crying: Here is a video with the exact error that I keep getting, I am only posting this for help. Thanks a lot for your help. :crying:
https://www.youtube.com/watch?v=N2XoFN4UTns
Your bootloader version on device is newer than that you are trying to flash....find latest firmware for your device and flash with odin and there will be no problem...
Happened to me and solved with this simple method
krokanic said:
Your bootloader version on device is newer than that you are trying to flash....find latest firmware for your device and flash with Odin and there will be no problem...
Happened to me and solved with this simple method
Click to expand...
Click to collapse
i have the same problem Odin stuck at sboot.bin
i flashed the last version and now is stucking at hidden.img`
thats happened when you flash bootloader