Stuck on Cyanogen Mod - Verizon Samsung Galaxy Note II

Here is my issue. I have had the LG G4 since it came out and I use that for my music. But, now. I want to use my Note II (With CM 12-20150201) as my main source for music in my vehicle. I can't do that cause bluetooth doesn't want to connect properly. I'm able to connect once on my way to work, I then on my way from work try to connect it won't connect or it will connect and will play music for about 2 seconds and freeze up. So, in order for it to work again I have to restart the phone and it will work. I figured it was a CM issue and I tried to flash another rom but when I try to do that it won't flash so any other TW based rom. How could I recover from this issue and go back to a TW based rom?

Related

Motorola Phone Portal and Pie Crust

Hey Guys,
Just flashed to 2.3.4 and the pie crust rom. Thanks to all your amazing guides, everything went perfectly.
The only problem is, (besides titanium backup not backing up any of my sms's) that whenever I TRY to select Motorola Phone Portal, it works for a second, then switches back to USB Mass Storage.
Is this a known bug? I would have posted in the Pie Crust rom thread, but I cant since I just created this account.
Thanks for all your help guys!
I am having the same problem with Alien 4 and Crust as well. Putting on Fruitcakes stock stock 2.3.4 to see if that fixes the problem. I like having access to my phone through browser but it's not working on most of the ROMs.
After having no luck with either of the roms, I installed R9 Rom. After installation I gave it around 10 minutes after skipping blur setup to settle down. Once all done, I set mode to Phone Portal and within 2 seconds it was back to USB Storage.
I waited for a minute and click on Phone Portal again and it worked.
It's been on Phone Portal for almost 5 minutes now.
Can anyone else try this on other roms.
1. Click on Motorola Phone Portal (First Option when you connect USB)
2. Try to access through browser and see if it changes to USB mode.
3. Try clicking first option again in a minute and see if it stays in that mode?
Thank you
P.S. I don't want to offend anyone or hate on any ROMs but I should have tested other ROMs thoroughly :facepalm: Can someone please verify if this method works on other ROMs?
Alien v4
No problems with Motorola Phone Portal here though I don't usually use it much.

[Q] Wipe question

Ok, I'm rooted my Eris, and I've installed a few different roms over the last 14 months, with success each time, but with each new rom I end up having to reconnect my phone to my car's bluetooth. Is there something I should or shouldn't be doing to keep the bluetooth connected following a rom install.
I know, pairing my phone and my car isn't that tough of a job, but I would like to not have to take this step everytime I install a new rom.
Thanks!
FYI... I was able to use Titanium Backup, and my Bluetooth worked fine after flashing a new rom.

Stuck at the DOWNLOAD mode while the USB Connection Not Working

Hi. I have an i9100 Samsung Galaxy S II. After purchasing, I flashed and installed a custom ROM on it (CYANOGEN) and everything was working perfectly.
Suddenly, USB stopped working as a media (it is working just for charging). It was strange because whenever I connect this specific phone to a NEW computer, it sees it for a few seconds then back to unrecognizing it. I though this could be a SW issue, I installed a new custom ROM (cant remember its name) but the same problem persisted.
Recently, I decided to revert to the official Samsung ROM (obtained from sammobile). I first tried this on another i9100 device (which did not have any problem), and everything went smooth.
When I tried to do the same to my faulty device, ODIN recognized it (surprisingly), and when I started the process, it wiped my device, and afterwards it stopped recognizing the USB port (again!!!).
Now I'm stock at the Download Mode, but no computer can see the phone to install the ROM (installing any ROM at this stage would be great )
Could anyone please advise if there is anything I could do to get out of this trouble?
Thanks

P9000 Cyanogenmod Stable 5 Microphone&Speaker NOT working

Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Read the Thread
Felino41 said:
Hey,
so I recently got the P9000 and I am very happy with it in General. There is just one big Problem, I am very used to Cyanogenmod on all my devices so I tried installing it in this phone, everything worked fine except for the microphone and the Speaker, Calls go through but I cant talk neither hear anything. Everytime I Start the phone it also says AudioFX was shut down. I also Tried listening to music or any sound for that matter but nothing works. I then installed the Stock ROM and everything works like a charm so I can rule out a Hardware issue. But the Stock ROM is just not cutting it for me in terms oft usability and options and I would much rather switch back to CM. Tried it again yesterday, clean install and everything, Microphone and Speaker are not working.... Does anyone have any ideas how to fix this? Any help greatly appreciated.
Click to expand...
Click to collapse
Flash Final 3... this will work for you.
MaStErB_1984 said:
Flash Final 3... this will work for you.
Click to expand...
Click to collapse
First of all thank you for the tip, in the meantime I installed Android 7 beta to have a look at it. Is there any way to go back to Stock ROM on Android 6 so I can install CM13 Final Build 3? I have tried flashing Recovery and STOCK ROM via SP Flash but it won`t work. I click Download, connect the phone while pressing the Vol+ and it says Downloading, goes up to 100% but the red bar is still there, then nothing happens. Every Flash of Stock or CM Recovery I did before that worked just fine so I guess it has something to do with Android 7. If there is no way I guess I`ll stick with Android 7 for now but I´d rather switch to CM.
There is a way...it has to do with the Android...it changes the preloader and the boot partition. Take this file from deepflex: https://yadi.sk/d/40K4mWLauUddk and flash with sp-tools. Finally flash the TWRP-Recovery from Jonny with flashtools. At the end do a full wipe and install the cm13.1 (Final 3) and the opengaaps.
Got it to work, I used a slightly different approach but right now I am finally installing CM13 Final Build 3, lets see if it works out fine! Thanks again for your help :good::good:

Microphone Problem in Android 11

Hi there
Since I updated my MI A3 to Android 11 the microphone sometimes doesn't record voices !
( I reset and flashed my phone so many times but didn't solve )
Upppppp
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Recently after owning a new car that is my first using Bluetooth handsfree option, I discovered this issue.
It seems the mic got somehow "stuck" to the car when I leave it, as the phone's normal mic then is okay. Just when trying to use the phone's handsfree mic in a call oder video calling in signal or hangouts it doesnt work. Even recording videos using the camera app is fine, but any handsfree option for any communication does not work.
Restarting the device or restarting bluetooth does not work. Somehow the phone recovers after sometime. When, why and how I do not know.
It definitely breaks down again once reconnected to the car.
with other bt devices have same problem?
Sadly I don't have any other bt device that is handsfree mic capable, I just own a speaker that is connected every now and then - it was my first idea to recover it by connecting to another bt device (the said speaker), but it does not work. Of course, the speaker is not connected using the same bt variant, the icon in the phone's settings is different.
mmmm... for this issue, the solution are: try delete all bt connection. if dont work try install latest software update. if dont work the definitive solution is wipe data and make a new clean installation. i suggest do this via miflash
wetito said:
If you flashed stock with miflash... Probably the problem is hardware. I have flashed many stock and custom a11 firmware. And my microphone work well. A question. When you reflashed stock rom... You have changed the active slot? All updates are installed on slot b. So if want to make a good clean istallation... In my opinion is better set active slot to a via fastboot before flash. Try this. Also you can try a custom stable rom with oss drivers. But is important to make a good installation. Or the software problems may not be solved
Click to expand...
Click to collapse
is there a guide to do a good factory reset without unlock the bootloader?
boot into recovery and wipe data

Categories

Resources