OPTIMUS KERNEL
Hi guys, this is Optimus kernel for Lux. This is a simple kernel with no bloatware.
Only necessary features will be added. This is for marshmallow (Up to R15) and Nougat (R16 and higher) only. Works on CM/AOSP/STOCK Roms. Enjoy!
Code:
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
FEATURES:
- Updated to latest CM-14.1 Sources
- Compiled With UBER 5.X Toolchain
- Full -03 support with device specific Cortex-A53 tweaks & other optimizations
- KCAL - Advanced color control driver by savoca
- random: squashed entropy tweaks & optimizations
- CPU overclocked to 1.7 GHz (Big) & 1.2 Ghz (Little)
- Added Optimus & Lionfish governor
- Undervolted to reduce heat
- Added state notifier driver
- Clusterplug by squid2
- cpu_boost: new enhancements including wakeup and hotplug boost
- Added zen, tripndroid & sioplus I/O schedulers
- Added toggles for disabling wlan wakelocks
- Optimized ARM RWSEM Algorithm
- Optimized Square Root Algorithm
- KGSL & Devfreq patches
- Disabled CRC check: 30% Performance boost
- arm/dts: msm8916: enabled bam_dmux fast shutdown flag
- Optimized MDSS panel routines to save power
- Added System Wide Power Efficient Workqueues
- VFP HardFloat
- Updates to zram,zsmalloc,irq etc
- Sched & Cpufreq Tweaks
- Removed some debug and logging options
- Enabled Advanced TCP Congestions
- CM14.1 Profiles compatibility
- Many more (check github)
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
You need ROM's default kernel before flashing this as this kernel uses Anykernel2 by @osm0sis (huge thanks to him). Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel)
DOWNLOAD:
R16+ is only for Nougat, 10 to 15 is for Marshmallow
ANDROIDFILEHOST
SOURCE
GITHUB
Special thanks to @Flashhhh @Alberto97 @squid2 @franciscofranco @flar2 @myfluxi @eng.stk @hurtsky @Imoseyon @neobuddy89
Reserved
Man do you ever keep busy. Thank you!
Sent from my XT1563 using Tapatalk
Thank you @GtrCraft ! Nice to try this new kernel...feels snappier and very stable :good:
Thanks! Installing now. Not to hate on other devs but i'm happy to see a kernel not entirely based on Squids.
I can also confirm good battery life on this kernel. Should be at least as good as squid one. Thanks for a new kernel Nick.
Running nice and steady. Like all the new io schedulers and wakelock extra's. Great kernel and thank you.
Its just Optimus Kernel ported from Osprey to Lux. But thanks guys
Sent from my XT1562 using XDA Labs
I would say just one word awesome kernel.. Great job..
Sent from my XT1562 using Tapatalk
There's no way to only flash stock kernel right? Need to reflash entire firmware?
Enviado desde mi XT1563 mediante Tapatalk
Chaninoza said:
There's no way to only flash stock kernel right? Need to reflash entire firmware?
Enviado desde mi XT1563 mediante Tapatalk
Click to expand...
Click to collapse
That's right. You will lose wifi when restoring stock kernel. Easiest is restoring a recent nandroid backup. Next time you flash a new ROM and you are finished setting it up,make a nandroid backup before flashing a custom kernel. Takes only 2 minutes to restore to stock using a nandroid backup.
This kernel is stable and has no issues as such! Hope the dev adds some amazing features to it in the future!
Sent from my XT1562 using XDA-Developers mobile app
Was running RR with RR kernel. Flashed this over RR kernel. Working everything
Automated reply by JARVIS
u are focusing in performance, battery life, or both with this kernel? btw nice work sir
xxsilentazasinxx said:
u are focusing in performance, battery life, or both with this kernel? btw nice work sir
Click to expand...
Click to collapse
Working for everything you just said, I'm actually getting more battery than squid's and better performance!
Working perfectly with Epsilon Rom btw.
Sent from my XT1563 using XDA-Developers mobile app
K.khiladi said:
Was running RR with RR kernel. Flashed this over RR kernel. Working everything
Automated reply by JARVIS
Click to expand...
Click to collapse
so it is safe to flash this kernel overwriting other custom kernel without the need to flash an entire rom.
pijes said:
so it is safe to flash this kernel overwriting other custom kernel without the need to flash an entire rom.
Click to expand...
Click to collapse
Worked for me, so even you can try.
Automated reply by JARVIS
pijes said:
so it is safe to flash this kernel overwriting other custom kernel without the need to flash an entire rom.
Click to expand...
Click to collapse
Worked for me too, on Epsilon Rom, you get Squid's by default, I just dirty flashed Optimus Kernel and that's it, working perfectly.
Sent from my XT1563 using XDA-Developers mobile app
raptorskate said:
Worked for me too, on Epsilon Rom, you get Squid's by default, I just dirty flashed Optimus Kernel and that's it, working perfectly.
Sent from my XT1563 using XDA-Developers mobile app
Click to expand...
Click to collapse
I should not do that, Optimus isnt based on Squid kernel but on CM's. You have to dirty flash rom first like said in OP
I was on stock rom with squids kernel a few minutes ago. Now running on optimus.
Sent from my XT1562 using XDA-Developers mobile app
Related
Just a simple & fast kernel. Go ahead, give it a try!
Features
CPU
-Min=384MHz
-Max=1512MHz
-Overclock=1998MHz
CPU Govoners
-Interactive
-Ondemand
-Conservative
-Performance
CPU Hotplug
-Franco's Hotplug (ported from Nexus 4 - mako )
GPU
-Min=128MHz
-Max=400MHz
-Overclock=533MHz
GPU Govoners
-Simple
-Ondemand
IO Schedulers
-Deadline
-NOOP
-CFQ
-ROW
Other Features
-Sweep to wake/sleep
-Double Tap to wake.
-Latest Linux 3.4.y patches
-TCP Congestion Control
-Linaro 4.8.2 Toolchain
-O3
-MP-Decision disabled
-Dynamic fsync
-Voltage control
-Other stuff
Credits
faux123
franciscofranco
n3ocort3x
anarkia1976
jassycliq
showp1984
lots of others (let me know if I missed you)
Downloads
Latest: DanKernel - r12
Older:
DanKernel - r11
DanKernel - r10
DanKernel - r9
DanKernel - r8
Changelog
r12
Added Sweep to wake/sleep and double tap to wake.
Now compiling with Linaro 4.8.2 - 09.13
Added a few other patches - check git.
r11
Merged Linux 3.4.62
Merged updates from JSS15R
Removed a bunch of useless debugging.
Changed some defaults for better performance.
r10
Push GPU OC to 533MHz
Set default GPU freq 400MHz
r9
Updates to SLUB memory allocator
Merged Linux 3.4.61
Change to touchboost code so it gets called a bit faster
Updated to Linaro 4.7.4 08/13 toolchain
Few changes to the governor defaults for some battery saving.
Lots of other patches - check git
r8
-Fix root issue - flash your ROM then r8, if coming from r7.
-Some patches from Franco's Hotplug
-Lots of patches from CodeAurora.
-Some reverts to give more stability.
Other Comments
Please let me know if there are any issues or if you have any recommendations - always looking to improve!
Source can be found here
Disclaimer: As usual, I'm not responsible for any damage etc that may happen to your device while using this kernel.
Just in case...
I'll give this a try sir and report back later!
Sent from my Nexus 7 using xda app-developers app
The list of original developers here keeps growing and growing every day, it's so awesome I'll give this one a try
Sent from my Nexus 7 using xda app-developers app
Quick question. So the kernel runs at a default of 1512mhz right? And you'd have to manually set it to 1.9ghz if you'd want that speed? Was hoping someone could clarify.
Sent from the dark side of the moon
scandalousk said:
Quick question. So the kernel runs at a default of 1512mhz right? And you'd have to manually set it to 1.9ghz if you'd want that speed? Was hoping someone could clarify.
Click to expand...
Click to collapse
Yes, that's correct.
R930 said:
Yes, that's correct.
Click to expand...
Click to collapse
Thanks for clarifying mate. I just flashed it and I'm going to leave it running the way you set it up, don't see a reason to stray away from stock settings. Everything is running smoothly, good job on the kernel man.
I also just noticed that all the default settings are highlighted in bold silly of me to not look properly
Sent from the dark side of the moon
Okay so it breaks my n7s root
smartyenrique said:
Okay so it breaks my n7s root
Click to expand...
Click to collapse
What ROM are you running? what super user app?
for me it breaks root to
im running stock JSS15Q and it was rooted with SuperSu-1.51 flashable zip file.
Svenmaster said:
for me it breaks root to
im running stock JSS15Q and it was rooted with SuperSu-1.51 flashable zip file.
Click to expand...
Click to collapse
Did you reflash the supersu zip after the kernel to see if that fixes it?
noneabove said:
Did you reflash the supersu zip after the kernel to see if that fixes it?
Click to expand...
Click to collapse
yep tried that, but still no root
Testing this out now, love Franco kernel so this should be a nice kernel to use until he gets his hands on a flo
No issue with root loss for me running CM with superSU, battery is at 92% with 1hour 10min screen on so is looking pretty good, and has been a lot smoother than Faux kernel!
Hi Guys,
Sorry was away on holiday... Got back a day ago - Probably not the best timing for a kernel release
smartyenrique said:
Okay so it breaks my n7s root
Click to expand...
Click to collapse
Svenmaster said:
for me it breaks root to
im running stock JSS15Q and it was rooted with SuperSu-1.51 flashable zip file.
Click to expand...
Click to collapse
So I look to have resolved the root issue. (fingers crossed)
Can you please give r8 (download here) a try and report back. You will need to flash ROM first if your still on r7.
Have tested it myself, looks to work OK on cm10 and stock.
Thanks
Trying r8, everything seems fine so far, kept root too However I would suggest people try ondemand instead of interactive, it gives as good performance with fewer random CPU spikes and no insane ramping on touch, it's what the nexus 4 uses by default now and i think it's the best balance
with r8 root is working just fine
Hello guys, I just wanted to know how it's going with this Kernel since I'm considering to try out some Kernel's.
Thank's in advance.
Best wishes
snOwjAwk said:
Hello guys, I just wanted to know how it's going with this Kernel since I'm considering to try out some Kernel's.
Thank's in advance.
Best wishes
Click to expand...
Click to collapse
Very good, until franco gets here it's a great alternative
noneabove said:
Very good, until franco gets here it's a great alternative
Click to expand...
Click to collapse
Thank's buddy heard of it aswell, but noone knows when he will arrive
EDIT: Btw how about init.d support?
cheers
noneabove said:
Very good, until franco gets here it's a great alternative
Click to expand...
Click to collapse
Is he planning to arrive? Maybe his flight is delayed...
Sent from my Nexus 7 using Tapatalk 4
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Solid Kernel aims to be a stable, minimalist and powerful kernel for everyone, no extreme overclock or experimental things that may affect your device health.
Reworked GPU Drivers
Bricked HotPlug
FIOPS Scheduler
CPU Voltage Control
Linaro 4.8 Toolchain
FSync On/Off Support
XZ Algorithm Compression
USB Mouse/Keyboard Patch
KCAL Post Processing Drivers
Simple Sound Control
EXFAT & F2FS Support
USB Fast Charge Support
Simple Thermal Driver
Custom CPU-BOOST Solution
27MHz GPU Clock
Dynamic GPU Governor
Permissive SELinux
PowerSuspend V1.7
GPU Min-Max Governor
/dev/frandom Support
PAY ATTENTION : My kernel is really minimalist so don't expect to have a lot of governors or things like that.
If you like my work then consider to buy me a coffee, it keeps me awake while I develop and it's always appreciated!
Click here to donate!
Download: Solid_Kernel_V2.55
XDA:DevDB Information
Solid Kernel, Kernel for the LG G3
Contributors
Loller79
Source Code: https://github.com/Loller79/Solid_Kernel-G3-STOCK-MM
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 2.55
Stable Release Date: 2017-08-05
Created 2015-12-04
Last Updated 2017-12-19
As a beta tester and friend my opinion is obvious: this is the best kernel for stock roms and the only one I really love <3 because of its smoothness, minimalist and speed
good to see you again in another common Android Development section
You just need to flash it and enjoy. No edits, no 3rd party apps, no problems, no lags
This is for now only for 16GB version of G3 acordin to download. anyway great to see more developers for our device.
Sipi1302 said:
This is for now only for 16GB version of G3 acordin to download. anyway great to see more developers for our device.
Click to expand...
Click to collapse
Kernel works on 32GB variant but if you use KEXEC you will brick your device.
Ok thanks for quick replay.
Hi. Any chance for support to other variants?
Yeah i'm looking for stock kernel that support multiboot.
good job keep working bro.
Edit ; could you add more gov and hotplug please
like alucard hyper
Edit : some thing wrong with your app
huzefaonline said:
Hi. Any chance for support to other variants?
Click to expand...
Click to collapse
I will for sure.
Duckscreen said:
Yeah i'm looking for stock kernel that support multiboot.
good job keep working bro.
Edit ; could you add more gov and hotplug please
like alucard hyper
Edit : some thing wrong with your app
Click to expand...
Click to collapse
I won't add any extra governor/hotplug because this kernel is built to be solid so I will focus only on 1 governor and 1 hotplug to get the best from both of 'em.
Regarding the app try opening it more times or check if the folder "solid" exists in your sdcard.
For now im using this kernel about 6 hours and everything is working fine and smooth even on conservative profile, no errors or FC on my D855 32gb with latest Novastock rom. For battery performance is to early to say but its looking fine so far. Looking forward to try next versions, if there were any, of this kernel and keep the excellent work you doing.
Any chance for kcal support?
thanks, awesome kernel
Poslato sa mog LG G3 koristeci Tapatalk
umair42 said:
Any chance for kcal support?
Click to expand...
Click to collapse
Sure, just tell me what you want (except governors and hotplugs) and I'll implement it.
Can this Kernel be use in Cloudy 2.5 rom?
Sent from my LG-D855 using XDA Free mobile app
multi888 said:
Can this Kernel be use in Cloudy 2.5 rom?
Click to expand...
Click to collapse
yes it should work
dadi11 said:
yes it should work
Click to expand...
Click to collapse
Thank you
Sent from my LG-D855 using XDA Free mobile app
Loller79 said:
Sure, just tell me what you want (except governors and hotplugs) and I'll implement it.
Click to expand...
Click to collapse
Thanks.Just add kcal in next build
Maniakk said:
New kernel? Sweeet! Work on the fulmics 2.1?
Click to expand...
Click to collapse
of course it does. it works with every stock rom
Wicked, looking forward to 32gb version ?
gsw5700 said:
Wicked, looking forward to 32gb version ?
Click to expand...
Click to collapse
If you don't use KEXEC you're fine with the 16GB version.
[D855][STOCK->5.0] Solid Kernel V1.0 [04/12/2015]
Is voltage controlling with another app recommended or should I stick to the Solid Kernel app? As I can see the changes with the app are made on the fly with terminal commands...
Wysłane z iPad za pomocą Tapatalk
DESTROYER KERNEL
Hi guys, this is Destroyer Kernel for Potter.
There are separate builds for Nougat, Oreo & Stock. Enjoy!
Code:
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
Features:
- Updated to latest Motorola & CAF Sources
- Upstreamed to latest version 3.18.91!
- Build with Linaro Toolchain
- All features of the Lineage Kernel
- Improved Battery Life
- Less Battery is drained on standby
- Wi-Fi disconnecting issue is fixed
- SdCardfs (Oreo)
- Sound Control!
- New FP navigation commits.
- Double tap to wake, Sweep to wake and sleep .
- KCAL Support.
More features will be coming in near future! Stay Tuned
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
Tweak the kernel with Kernel Auditor, EX Kernel Manager or any other Manager you like.
Stock:
(Please read this before flashing stock build)
It's version is 3.18.31 it may get upstreamed somewhere in future..
Camera is not working on build number NPN25.137-35 & NPN25.137-43 rest everything is working.. If you have flashed this build on those two build numbers you can flash this boot.img via twrp and the camera will be back again..
Thanks to Martichou & Keertesh for helping me out!
Download:
Nougat | Oreo-x64 | Stock
XDA:DevDB Information
Destroyer Kernel, Kernel for the Moto G5 Plus
Contributors
manikchathli, keertesh
Source Code: https://github.com/manikchathli/Destroyer-Kernel
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-01-07
Created 2017-08-19
Last Updated 2018-01-07
Thanks its an awesome kernel
Thank you.
Sent from my Moto G (5) Plus using Tapatalk
Please add maple I/o
Edit: I tried to paste the details but I guess I can't do that with xda labs? @manikchathli the kernel is already running well though. Maybe because of Uber? IDK I like it though
New Update is UP!
New update of Destroyer™ Kernel
~ Upstreamed to 3.18.67! ?
~ Added fingerprint booster!
Pretty new to Kernel Flashing
Do I have to Re flash the Lineage ROM or flashing the kernel on top of it works?
vee.vardhan said:
Do I have to Re flash the Lineage ROM or flashing the kernel on top of it works?
Click to expand...
Click to collapse
Flash rom.
Then gapps.
Then kernel.
Then magisk or supersu whichever you prefer.
vee.vardhan said:
Do I have to Re flash the Lineage ROM or flashing the kernel on top of it works?
Click to expand...
Click to collapse
No need to flash the ROM again just flash the kernel..
manikchathli said:
New update of Destroyer™ Kernel
~ Upstreamed to 3.18.67! ?
~ Added fingerprint booster!
Click to expand...
Click to collapse
WTF is a fingerprint booster. Sounds like a ram booster.
Sent from my Motorola XT1687 using XDA Labs
triggerlord said:
WTF is a fingerprint booster. Sounds like a ram booster.
Click to expand...
Click to collapse
You know how touch boost works? Same thing just for the fingerprint scanner
zeft64 said:
You know how touch boost works? Same thing just for the fingerprint scanner
Click to expand...
Click to collapse
So increasing the sensitivity? Why not just say that instead of something that sounds like marketing BS?
Sent from my Motorola XT1687 using XDA Labs
triggerlord said:
So increasing the sensitivity? Why not just say that instead of something that sounds like marketing BS?
Click to expand...
Click to collapse
Because that's what it's called
zeft64 said:
Because that's what it's called
Click to expand...
Click to collapse
It's called increasing the sensitivity.
Sent from my Motorola XT1687 using XDA Labs
triggerlord said:
It's called increasing the sensitivity.
Click to expand...
Click to collapse
No... The kernel patch and feature itself is called fingerprint boost. And why are you trying to argue about this? Are you bored? It's not that serious ?
New Update is UP!
New update of Destroyer™ Kernel
~ Upstreamed to 3.18.68! ?
~ Added PegasusQ and Lionfish Governors!
This kernel can overclock?
pablofior said:
This kernel can overclock?
Click to expand...
Click to collapse
Nope
@manikchathli why does your kernel do this on boot? It eventually will idle and stop but then it seems like most of the load still stays on one core
EDIT: check next pay for screen shot. Forgot to upload them lol
Screenshots of weird (to me at least) kernel behavior
zeft64 said:
@manikchathli why does your kernel do this on boot? It eventually will idle and stop but then it seems like most of the load still stays on one core
EDIT: check next pay for screen shot. Forgot to upload them lol
Click to expand...
Click to collapse
Change the cpu governor to interactive for now and the problem will be fixed.. i will fix this issue in the next update!!
*** Disclaimer
Flash at your own risk! I take no responsibility in the event that an alarm is missed and you're late, thermonuclear war beaks out, or you spend so much time on your phone that your wife leaves you.
Introduction
Hey guys! This is the kernel myself and my good friend APOPHIS9283 have been working on for OnePlus 5/5t.
- Kernel only supports custom ROMs - final OOS version of 1.0.17 from 07/03/2018 is here in the OP, as is.
- Kernel will always be kept upstream to latest linux-stable
- We do not shy away from features around here. This kernel is LOADED! If you want something minimal, this is not for you. !
- If you have issues, we need logs! If it is an issue that is not able to be logged for some reason or another, please give detailed steps on how to replicate the issue. No logs = no support! Help us help you!
Features
- Upstreamed to latest linux-stable
- Governor options including: alucard, tripndroid, cultivation, impulse, chill, blu_active
- Overclock and underclock support. Kernel boots/defaults to stock frequencies though.
- Dynamic stune boost
- Adreno boost
- Adreno idler
- Wireguard support
- Sweep2Sleep
- LED Settings
- High brightness mode
- sRGB
- I/o schedulers including maple, deadline, bfq and tripndroid
- USB fastcharge
- Boeffla Generic Wakelock Blocker
- TCP congestion avoidance algorithms - Too many options to list!
- Backlight dimmer
- KCAL color control
- Sound control
-i/o switcher
- More I probably forgot, but you get the idea!
Installation
- If on a custom kernel, dirty flash your ROM. Reboot to recovery and flash this after booting with ROM's baked in kernel.
- If on ROM's stock kernel, just wipe kernel app data and flash this in recovery. If needed, flash no-verity after!
- Upgrading from one version to another is as simple as flashing the kernel and no verity if needed. I do recommend wiping kernel app data on each flash - we add things often!
Download
https://androidfilehost.com/?fid=5862345805528046227
Telegram group for Singularity kernel users: https://t.me/joinchat/C3FsEk7qvo5Nl3o3RXsyLw
OOS Final build 1.0.17 07/03/2018. Will not be updated or supported further but here for anyone who wishes to use it, here it is: https://androidfilehost.com/?fid=11050483647474833324
- Credits and thanks!
@nathanchance for the best base anyone could ever ask for, for assisting without expecting anything, for making upstream so simple, and for being a friend.
@osm0sis for AnyKernel2
@Lord Boeffla for his work
- All the users for giving us a reason to do this!
- Anyone I forgot, send a PM and I'll add ya.
ROM devs feel free to inline this into your ROM. Just give me a heads up and please link them here/Telegram chat.
XDA:DevDB Information
Singularity Kernel, Kernel for the OnePlus 5T
Contributors
wrongway213, apophis9283, REV3NT3CH
Source Code: https://github.com/Singularity-Kernel/Singularity
Kernel Special Features: ALL THE THINGS!
Version Information
Status: Stable
Current Stable Version: 1.0.19
Stable Release Date: 2018-07-11
Created 2018-03-23
Last Updated 2018-07-11
Congratulations!
Enjoy the kernel
Thanks for your work, Glad to see this new kernel !
Love the honesty! This kernel is LOADED!
Will have to try it when I switch of of OOS!
Thanks guys!
Features same as my kernel has. Yeah! Now I can use freatures-rich kernel for customs!
Thanks guys! In some free time will try to help via pull requests.
Welcome. :fingers-crossed::fingers-crossed:
apophis9283 said:
Enjoy the kernel
Click to expand...
Click to collapse
Oh snap!!!! LOL
I'm a hardcore Franken kernel user but I'm going to back that kernel up and give this a shot. It's the first kernel that's intrigued me in a long time. Franken is the standard best kernel for me, so it means something if I can be swayed by your work.
preference said:
I'm a hardcore Franken kernel user but I'm going to back that kernel up and give this a shot. It's the first kernel that's intrigued me in a long time. Franken is the standard best kernel for me, so it means something if I can be swayed by your work.
Click to expand...
Click to collapse
I started with a fresh base from Flash kernel (huge thanks to him), and built it with my idea of how a kernel should be IMO and with user feedback.
Hope you enjoy
apophis9283 said:
I started with a fresh base from Flash kernel (huge thanks to him), and built it with my idea of how a kernel should be IMO and with user feedback.
Hope you enjoy
Click to expand...
Click to collapse
All the best with this kernel, especially as its aimed at custom roms rather than OOS.
When Paranoid Android Oreo hits, is there any possibility that you and @wrongway213 would consider doing a version for that ?
If not, then no problem
SlyUK said:
All the best with this kernel, especially as its aimed at custom roms rather than OOS.
When Paranoid Android Oreo hits, is there any possibility that you and @wrongway213 would consider doing a version for that ?
If not, then no problem
Click to expand...
Click to collapse
I'm always willing to take a look.
apophis9283 said:
I'm always willing to take a look.
Click to expand...
Click to collapse
That would be very nice, if it were possible.
Thanks for the consideration.
That is of course if Paranoid Android Oreo ever materialises...LOL
If you are on a ROM and had broken gestures. Will you flash this and see if it doesnt fix them
Yea this Kernel is great stuff. Can't recommend it enough... I trust it's creator and it works solid. Good job @apophis9283
Sent from my ONEPLUS A5010 using Tapatalk
Gestures should work for all ROMs. Let me know if they don't. A few other tweaks I wanted to get in there. Just wipe your kernel app data. To match my settings just use tripndroid governor.
@wrongway213 what custom rom do you recommend for best kernel effectivity? thanks
nadejo said:
@wrongway213 what custom rom do you recommend for best kernel effectivity? thanks
Click to expand...
Click to collapse
I don't think he's tried anything else. I have. I flashed AICP, and CRDROID. Both ran perfect. I like it on LR but I'm not sure it because the kernel is better on one or the other. Just what I prefer to use. I had to flash other roms to make sure everything was working.
This was taken while on AICP. I find this is generally what stats I get
Tested with Aicp, validus and omni all works great
Hi, all XDA members, I built a light-weight kernel for our little monster (hammerhead).
My kernel is based on Unlegacy Kernel. I optimized the kernel for best battery life and performance balance. I tested it on AOSP Extended ROM. It should work on LOS too.
Features:
-Intelliactive governor.
-SIO scheduler.
-25mV Undervolted manually from acpuclock source code. (Only for PV2 CPUs)
-More cooler device.
You can download img from Google Drive link. Flash it via TWRP or fastboot.
https://drive.google.com/file/d/1RGqpxZJ5lJve57IJeRHZm-BjMhDGIQIy/view?usp=sharing
Source code: https://github.com/metahex/android_kernel_lge_hammerhead
Awesome, I'll test and feed you back
thanks for your work
Detail please for features? Thanks
For this build, kernel comes with intelliactive governor.
I will add some features and improvements for best battery life and performance. (In next build i will undervolt it and i will add more governors, I/O schedulers)
Changelog:
(v1.0.2)
-Kernel name banner fixed.
-25mv Undervolted for PV2 CPUs.
(v1.0.1)
-SIO is the default I/O scheduler.
Testing
Can someone confirm that kernel works with LOS?
thanks for the new kernel, but no work in DU 12.2 flashed via twrp.
Any chance you could have your kernel fix phonecall bluetooth audio? It's bugged on every custom ROM right now and it's been theorized it's a kernel issue.
rnadomuc said:
Any chance you could have your kernel fix phonecall bluetooth audio? It's bugged on every custom ROM right now and it's been theorized it's a kernel issue.
Click to expand...
Click to collapse
I will work on it in my free time.
metahex12 said:
I will work on it in my free time.
Click to expand...
Click to collapse
Here is some info on it: https://forum.xda-developers.com/go...nlegacy-android-project-t3593425/post75688720
Xaif fixed a problem with video recording, you should include it in your kernel.
https://github.com/esa-n/android_ke...mmit/45abf34f6a493b2e918b054bedeec3c4d2003900
How i should flash it?
Like "boot" or "recovery" ?
Its a kernel it goes flash it as a boot IMG
I flashed this with AEX ROM and it hung at boot
Will a custom kernel enable NTFS and exFat support on Oreo?? No ROM currently works why either of those so u can't use my external hard drives.
Flashed 1.0.2 kernel over us 8.1. The undervolt sold me! If possible, and if you're entertaining ideas, I'd greatly appreciate usb fastcharge support.
I've heard the arguments against it, but in two years I'd never had a problem.
Will it work on Nougat (Los 14.1)?
psydex said:
Will it work on Nougat (Los 14.1)?
Click to expand...
Click to collapse
no
Deteted
Is this kernel dead?
Edit: @metahex12 Can you consider adding support to Pie (Unlegacy CAF ROM)?