Hi all!
I was using Modaco 2.9 before and it was amazing stable.
Later on I tryied [email protected] worked well, but not as stable as the modaco, so I thought lets change to the 3.0. Since that I have al lot system crashes, so I thought I need to do "deldalv and/or ext_wipe" with the RA-recovery-1.2.3
Figured out that it didnt work, it says I should use "adb deldalv"
I couldnt get the adb to run on my ubuntu linux, so I tried to find an update for the RA-recovery.
And there is RA-recovery-1.5.1 and I can just install it (cause I have a previous version) via adb.
Now My Question:
How does it work?!?
Code:
[email protected]:~$ adb usb
error: insufficient permissions for device
[email protected]:~$ adb devices
List of devices attached
???????????? no permissions
[email protected]:~$ adb kill-server
[email protected]:~$ adb start-server
* daemon not running. starting it now *
* daemon started successfully *
[email protected]:~$ adb usb
error: insufficient permissions for device
[email protected]:~$ adb devices
List of devices attached
???????????? no permissions
Code:
[email protected]:~$ cat /etc/udev/rules.d/50-android.rules
#Bus 001 Device 005: ID 0bb4:0c02
SUBSYSTEM=="usb", SYSFS(idVendor)=="0bb4",MODE="0666"
How do I connect the device then, if not like that?
How can I test if everything works?
Thanks in advance
Unicate said:
How do I connect the device then, if not like that?
How can I test if everything works?
Thanks in advance
Click to expand...
Click to collapse
afaik this looks good, try starting adb as root. this is what adb devices says for me:
Code:
[email protected]:~$ adb devices
List of devices attached
HT98XXXX427 device
Code:
./adb start-server
./adb shell
works for me (with root ofcourse )
I set up my system so that the adb deamon starts at boot.
Created a script in the /etc/init.d directory called adb:
Code:
#! /bin/sh
case "$1" in
start)
/home/joeblow/AndroidSDK/tools/adb start-server
;;
stop)
/home/joeblow/AndroidSDK/tools/adb kill-server
;;
*)
echo "Usage: $0 start|stop" >&2
exit 3
;;
esac
Created a link to it in /etc/rc2.d:
Code:
lrwxrwxrwx 1 root root 13 2010-01-09 19:17 S10adb -> ../init.d/adb
Off Topic...
Am sorry to be a little off topic.. I just got my Hero and was trying to figure out all the stuff about it here on XDA.. Can anybody tell me what is ADB ??.. Whats it used for ??.. As far as I have understood, I think its some sorta software to connect hero to the computer to transfer files and stuff.. Is it right ??.. If yes.. Then what is the difference between this and HTC SYNC ??.. Thanks in advance.. Cheers !!!
if You want only transfer files, You don't need ADB.
htc sync is for synchronizing phone (contacts, calendar, etc) with PC (i guess, i don't use it ) and for upgrading SW.
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, it will also let member do things manually instead of relying on update ZIP's all the time. Besides of explaining how to use a simple program such a quick ADB Pusher, i will also explain in depth the commands of ADB through the actual command line interface, so here we go:
First of all we will start with The command line ADB, the quick adb pusher tutorial is further down the post.
Before we start explaining some of the code what is used in ADB, it is important you know what it is, it is called the Android-Debug-Bridge.
In order to even get ADB to wokr you need to follow these procedures:
Settings -> Developers options -> USB-de bugging
Then check that box, it will make you feel like a boss.
Now once you have done that your android device, is now setup for both development and ADB. Next you are going to plug your device into your computer, via a usb cable.
Once you have done that you need to go to the directory of your ADB interface, this is where you have the android SDK installed too, on a linux or mac based system this could be:
Code:
cd /home/yourusername/android-sdk-mac/tools
Once you have the ADB interface loaded into your terminal, if you type help it will show something similar to this:
Code:
Android Debug Bridge version 1.0.25
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
Now that you have ADB running here are some simple commands on how to use it:
How identify that your device is being recognised by ADB:
Code:
adb devices
Once this has been typed it should show something like this:
Code:
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT26GW507639 device
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>
If there is a line what says "HT26GW507639" with "device" at the end your devices is successfully recognised by ADB!
How to pull data from your device:
Code:
adb -s [yourdeviceADBNUMBERHERE] pull /system /the directory you want it saved too
This command will pull all the files from your devices system directory, to the directory you told it to be saved too.
I did the pull command on a PC and I was able to get all the data from following directories on my Desire C:
/data
/system
How to push data to your device:
Code:
adb -s [yourdeviceserialnumberhere] push /system/app/whatever.apk
This command will push the files you wish to your phone, though this command.
The most basic ADB commands
ADB push, as explained before this command is used to send files to your device
Code:
adb push
ADB pull, as explained before it pulls files from your phone, and makes a copy of them.
Code:
adb pull
ADB Install and example of this code would be "adb install c:\users\app.apk"
Code:
adb install c:\users\app.apk
ADB Shell, this command begins a shell connection to the device on the other end.
Code:
adb shell
ADB reboot, it does what it says
Code:
adb reboot
ADB reboot recovery, this also does what it says
Code:
adb reboot recovery
ADB reboot bootloader, this also does what is says, like the ones above.
Code:
adb reboot bootloader
ADB remount, this remounts the devices file system for editing etc...
Code:
adb remount
ADB Shell commands:
cd, this command changes directories in your devices filesystem.
Code:
cd /system/app
is, this command listes all of the file present in the directory you are at.
Code:
is /system/app
rm, this command removes file from your device.
rm /system/app/whatever.apkcp, this command copies files, and is very similar to the cat command below.
Code:
cp /system/app/whatever.apk /sdcard/whatever.apk
cat, this command is also used to copy files to your device.
Code:
cat /system/app/whatever.apk > /sdcard/whatever.apk
exit, this command exits the ADB shell.
Code:
exit
If any of you are having any problems, read the FAQ first before posting a question in this thread, happy pushing!
If you think any other commands should me added to this section, PM me about it.
As explained above, the quick ADB pusher is an interface over the code based ADB. I will be a much easier approach for new user of android to get to grips to, that is why I am including it.
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, so here we go:
First of all you want to download the quick adb pusher program, this is in both this thread and the revolution Rom thread on XDA, the link for the program is listed below:
Quick ADB Pusher
Now you want to make sure your phone is plugged into your computer, but do not put it into USB storage mode. Make sure your USB de-bugging option is enabled it is located at:
Settings --> Developer options --> USB De-bugging
Now you will start the quick ADB pusher program, once it has started it should detect your phone. If it does not then post a comment in the thread below and we will resolve the issue.
Watch the video below to clarify a few things, such as how to copy system apps etc...
Again I hope this tutorial helps some people out, remember to read the FAQ first before posting,, to prevent the same questions being asked time and time again.
FAQ
Do you guys want a guide on how to build roms for your device?
Sent from my HTC Desire C using xda premium
russell664 said:
Do you guys want a guide on how to build roms for your device?
Sent from my HTC Desire C using xda premium
Click to expand...
Click to collapse
Yes please I think it would be very interesting.
And thanks for your time in doing this :good:
AW: [GUIDE][HOWTO] How to push files using ADB Desire V
Me too
Sent from my HTC Desire V using xda premium
I will when I have time guys, if you want more guides and stuff, surely you can smash the thanks button right in the face for me. To show your support, and that you appreciate my work.
Creating our own custom roms
Yup. It really would be a great tutorial for newbies to get started to make things, which once they could only appreciate. I am myself good at programming and algorithms, but Android development is quite alien to me. I consider myself a potential developer, if only would I get a kick start at ROM making. Also we could be able to support unknown or local market devices. I think that would be really beneficial for the entire Android community to see new budding developers with their innovations. :angel:
Hit thanks if you agree.
russell664 said:
As explained above, the quick ADB pusher is an interface over the code based ADB. I will be a much easier approach for new user of android to get to grips to, that is why I am including it.
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, so here we go:
First of all you want to download the quick adb pusher program, this is in both this thread and the revolution Rom thread on XDA, the link for the program is listed below:
Quick ADB Pusher
Now you want to make sure your phone is plugged into your computer, but do not put it into USB storage mode. Make sure your USB de-bugging option is enabled it is located at:
Settings --> Developer options --> USB De-bugging
Now you will start the quick ADB pusher program, once it has started it should detect your phone. If it does not then post a comment in the thread below and we will resolve the issue.
Watch the video below to clarify a few things, such as how to copy system apps etc...
Again I hope this tutorial helps some people out, remember to read the FAQ first before posting,, to prevent the same questions being asked time and time again.
Click to expand...
Click to collapse
It told me my devices wasn't rooted?
When trying to push a file to my internal storage on my Moto X does the file need to be located in a specific location? I am trying to root my device and need to push a file to my device. I am very new to this, and have adb working and my device showing up when i run "adb devices". I have a folder on my desktop titled "android" which contains adb, fastboot, sdk, and eclipse. Do I need to save the files I want to push to the root of this folder on my desktop? Thanks for the help!
stavebomb said:
When trying to push a file to my internal storage on my Moto X does the file need to be located in a specific location? I am trying to root my device and need to push a file to my device. I am very new to this, and have adb working and my device showing up when i run "adb devices". I have a folder on my desktop titled "android" which contains adb, fastboot, sdk, and eclipse. Do I need to save the files I want to push to the root of this folder on my desktop? Thanks for the help!
Click to expand...
Click to collapse
So push whole folder by
Code:
adb push <path on PC> <path on Moto X>
How to push this command
Please help me:
http://forum.xda-developers.com/showthread.php?t=2708466
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/laf
on my LG G2 (D802 ver 20B without root indian version)
My tablet is stuck in the recovery mode on a permanent loop. Please help
I'm just learning to code and honestly as of 6 months ago I didn't even know how to turn a computer on although I practice and take classes I'm petrified I'm going to screw up my computer. Anyway, my tablet is stuck in the recovery mode on a permanent loop so I can't put it in debug development mode. Please help me fix it. I can't afford a new one and I use it for work when I'm at a job site. I downloaded the Android Suite bundle zip (the one that said recommended) also the sdk tools zip, the quick adb pusher and the lollipop image file, lollipop rom file. I've tried every one of the commands from your site and many many other sites and it's not fixing my tablet. I know you guys don't like stupid questions but I'm feeling like a moron because I can't figure it out. Could someone please please help me fix me tablet.
russell664 said:
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, it will also let member do things manually instead of relying on update ZIP's all the time. Besides of explaining how to use a simple program such a quick ADB Pusher, i will also explain in depth the commands of ADB through the actual command line interface, so here we go:
First of all we will start with The command line ADB, the quick adb pusher tutorial is further down the post.
Before we start explaining some of the code what is used in ADB, it is important you know what it is, it is called the Android-Debug-Bridge.
In order to even get ADB to wokr you need to follow these procedures:
Settings -> Developers options -> USB-de bugging
Then check that box, it will make you feel like a boss.
Now once you have done that your android device, is now setup for both development and ADB. Next you are going to plug your device into your computer, via a usb cable.
Once you have done that you need to go to the directory of your ADB interface, this is where you have the android SDK installed too, on a linux or mac based system this could be:
Code:
cd /home/yourusername/android-sdk-mac/tools
Once you have the ADB interface loaded into your terminal, if you type help it will show something similar to this:
Code:
Android Debug Bridge version 1.0.25
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
Now that you have ADB running here are some simple commands on how to use it:
How identify that your device is being recognised by ADB:
Code:
adb devices
Once this has been typed it should show something like this:
Code:
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT26GW507639 device
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>
If there is a line what says "HT26GW507639" with "device" at the end your devices is successfully recognised by ADB!
How to pull data from your device:
Code:
adb -s [yourdeviceADBNUMBERHERE] pull /system /the directory you want it saved too
This command will pull all the files from your devices system directory, to the directory you told it to be saved too.
I did the pull command on a PC and I was able to get all the data from following directories on my Desire C:
/data
/system
How to push data to your device:
Code:
adb -s [yourdeviceserialnumberhere] push /system/app/whatever.apk
This command will push the files you wish to your phone, though this command.
The most basic ADB commands
ADB push, as explained before this command is used to send files to your device
Code:
adb push
ADB pull, as explained before it pulls files from your phone, and makes a copy of them.
Code:
adb pull
ADB Install and example of this code would be "adb install c:\users\app.apk"
Code:
adb install c:\users\app.apk
ADB Shell, this command begins a shell connection to the device on the other end.
Code:
adb shell
ADB reboot, it does what it says
Code:
adb reboot
ADB reboot recovery, this also does what it says
Code:
adb reboot recovery
ADB reboot bootloader, this also does what is says, like the ones above.
Code:
adb reboot bootloader
ADB remount, this remounts the devices file system for editing etc...
Code:
adb remount
ADB Shell commands:
cd, this command changes directories in your devices filesystem.
Code:
cd /system/app
is, this command listes all of the file present in the directory you are at.
Code:
is /system/app
rm, this command removes file from your device.
rm /system/app/whatever.apkcp, this command copies files, and is very similar to the cat command below.
Code:
cp /system/app/whatever.apk /sdcard/whatever.apk
cat, this command is also used to copy files to your device.
Code:
cat /system/app/whatever.apk > /sdcard/whatever.apk
exit, this command exits the ADB shell.
Code:
exit
If any of you are having any problems, read the FAQ first before posting a question in this thread, happy pushing!
If you think any other commands should me added to this section, PM me about it.
Click to expand...
Click to collapse
I Want to Thank Russell664. I followed your instructions and my tablet works again.
Thank you very much. You do not know how appreciative I am for your help. I hate feeling so stupid about these things. Your detailed guide was so informative and so so helpful. Debbie from Handyman-Girl
:good:
russell664 said:
Hello guys today I am going to show you how to use a program called quick adb pusher, it is a great starting point for new android users who want to copy modified system files, without flashing update Zip’s all the time, it will also let member do things manually instead of relying on update ZIP's all the time. Besides of explaining how to use a simple program such a quick ADB Pusher, i will also explain in depth the commands of ADB through the actual command line interface, so here we go:
First of all we will start with The command line ADB, the quick adb pusher tutorial is further down the post.
Before we start explaining some of the code what is used in ADB, it is important you know what it is, it is called the Android-Debug-Bridge.
In order to even get ADB to wokr you need to follow these procedures:
Settings -> Developers options -> USB-de bugging
Then check that box, it will make you feel like a boss.
Now once you have done that your android device, is now setup for both development and ADB. Next you are going to plug your device into your computer, via a usb cable.
Once you have done that you need to go to the directory of your ADB interface, this is where you have the android SDK installed too, on a linux or mac based system this could be:
Code:
cd /home/yourusername/android-sdk-mac/tools
Once you have the ADB interface loaded into your terminal, if you type help it will show something similar to this:
Code:
Android Debug Bridge version 1.0.25
-d - directs command to the only connected USB device
returns an error if more than one USB device is present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is running.
-s <serial number> - directs command to the USB device or emulator with
the given serial number. Overrides ANDROID_SERIAL
envivornment variable.
-p <product name or path> - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.
If -p is not specified, the ANDROID_PRODUCT_OUT
environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect <host>:<port> - connect to a device via TCP/IP
disconnect <host>:<port> - disconnect from a TCP/IP device
device commands:
adb push <local> <remote> - copy file/dir to device
adb pull <remote> <local> - copy file/dir from device
adb sync [ <directory> ] - copy host->device only if changed
(see 'adb help all')
adb shell - run remote shell interactively
adb shell <command> - run remote shell command
adb emu <command> - run emulator console command
adb logcat [ <filter-spec> ] - View device log
adb forward <local> <remote> - forward socket connections
forward specs are one of:
tcp:<port>
localabstract:<unix domain socket name>
localreserved:<unix domain socket name>
localfilesystem:<unix domain socket name>
dev:<character device name>
jdwp:<process pid> (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport
adb install [-l] [-r] <file> - push this package file to the device and install it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data)
adb uninstall [-k] <package> - remove this app package from the device
('-k' means keep the data and cache directories)
adb bugreport - return all information from the device
that should be included in a bug report.
adb help - show this help message
adb version - show version num
DATAOPTS:
(no option) - don't touch the data partition
-w - wipe the data partition
-d - flash the data partition
scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints: <serial-number>
adb status-window - continuously print device status for a specified device
adb remount - remounts the /system partition on the device read-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the bootloader or recovery program
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip <port> - restarts the adbd daemon listening on TCP on the specified port
networking:
adb ppp <tty> [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
<tty> refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns
adb sync notes: adb sync [ <directory> ]
<localdir> can be interpreted in several ways:
- If <directory> is not specified, both /system and /data partitions will be updated.
- If it is "system" or "data", only the corresponding partition
is updated.
Now that you have ADB running here are some simple commands on how to use it:
How identify that your device is being recognised by ADB:
Code:
adb devices
Once this has been typed it should show something like this:
Code:
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
HT26GW507639 device
C:\Users\Daniel\Android development\ADB, Fastboot\adt-bundle-windows-x86_64\adt-
bundle-windows-x86_64\sdk\platform-tools>
If there is a line what says "HT26GW507639" with "device" at the end your devices is successfully recognised by ADB!
How to pull data from your device:
Code:
adb -s [yourdeviceADBNUMBERHERE] pull /system /the directory you want it saved too
This command will pull all the files from your devices system directory, to the directory you told it to be saved too.
I did the pull command on a PC and I was able to get all the data from following directories on my Desire C:
/data
/system
How to push data to your device:
Code:
adb -s [yourdeviceserialnumberhere] push /system/app/whatever.apk
This command will push the files you wish to your phone, though this command.
The most basic ADB commands
ADB push, as explained before this command is used to send files to your device
Code:
adb push
ADB pull, as explained before it pulls files from your phone, and makes a copy of them.
Code:
adb pull
ADB Install and example of this code would be "adb install c:\users\app.apk"
Code:
adb install c:\users\app.apk
ADB Shell, this command begins a shell connection to the device on the other end.
Code:
adb shell
ADB reboot, it does what it says
Code:
adb reboot
ADB reboot recovery, this also does what it says
Code:
adb reboot recovery
ADB reboot bootloader, this also does what is says, like the ones above.
Code:
adb reboot bootloader
ADB remount, this remounts the devices file system for editing etc...
Code:
adb remount
ADB Shell commands:
cd, this command changes directories in your devices filesystem.
Code:
cd /system/app
is, this command listes all of the file present in the directory you are at.
Code:
is /system/app
rm, this command removes file from your device.
rm /system/app/whatever.apkcp, this command copies files, and is very similar to the cat command below.
Code:
cp /system/app/whatever.apk /sdcard/whatever.apk
cat, this command is also used to copy files to your device.
Code:
cat /system/app/whatever.apk > /sdcard/whatever.apk
exit, this command exits the ADB shell.
Code:
exit
If any of you are having any problems, read the FAQ first before posting a question in this thread, happy pushing!
If you think any other commands should me added to this section, PM me about it.
Click to expand...
Click to collapse