AOSPA 6.0 6.0.1 on Oneplus 2 - first impressionsRecently installed PA 6.0 on my OP2, so these are initial impressions.Recently flashed the new PA 6.0.1 build on my OP2, so these are initial impressions.
http://get.aospa.co/official/oneplus2
AOSPA 2016 OP2 install instructions @ OnePlus forums
MY Installation:
Coming from seraph08's CM13.0 June 6th build (so having Oxygen OS 3.01firmware and TWRP hybrid recovery), I wiped dalvik, cache, data & system, flashed the PA ROM (8 June build), latest openGapps nano (9 June) & SuperSU beta v2.74. All good.
(Note: PA is now officially recommending BaNkS gapps instead of opengapps. Personally I haven't had any trouble with opengapps nano though...)
Dirty flashed the June 16 build on my existing installation, immediatly flashing also BaNkS gapps, OxygenOS 3.0.2 camera, v4a, v4a sulinux policy zip & latest SuperSU beta. Wiped cacke/dalvik after flashing all these in one go.
NOTE: First boot takes a long time. Stayed on oneplus boot screen several minutes before going to AOSPA boot animation...
First boot after flashing, stayed much less time on the onplus boot screen, but of course app optimization took forever as expected. Maybe 20-25 minutes for 109 apps...
PROs so far:
[*]Overall system is fast
[*]WiFi is fast & solid, even with routers with rekeying enabled. (frequency on automatic & legacy DHCP is NOT enabled)
[*]GPS fast and accurate
[*]Dual SIM works (mostly) - individual SIM disable/enable working, but still some random changes in SIM defaults after reboot (this problem disappears when one of the SIMs is disabled)
[*]Notification slider works
[*]FPS working & fast (1Password app now working correctly with FPS)
[*]Camera working fine
[*]Oxygen OS3 camera port working fine
CONs so far:
[*]individual SIM cards disable fails
[*]No LTE/4g on sim 2
[*]FPS not working with 1Password app
[*]No Kcal support (yet)
Initial verdict:
I've been pretty happy to be on CM13 these past 3+ months. It finally made my OP2 usable and was an excellent escape route from Oxygen OS. But as of today I am both sad & happy to say that I'm leaving CM13 because I now have the best ROM out there for the OP2.
Have been thoroughly enjoying PA 6.0 since release as a daily driver. The new build fixed the bugs which most annoyed me. Great update.
#StayParanoid
.
.
What about the browser? Does it work for you? I got a FC each time I'm trying to open it up.
mousse04 said:
What about the browser? Does it work for you? I got a FC each time I'm trying to open it up.
Click to expand...
Click to collapse
No force close for me, but the address bar isnt working, switched to the cyanogenmod browser for now.
mousse04 said:
What about the browser? Does it work for you? I got a FC each time I'm trying to open it up.
Click to expand...
Click to collapse
JoinTheRealms said:
No force close for me, but the address bar isnt working, switched to the cyanogenmod browser for now.
Click to expand...
Click to collapse
Browser working fine for me including address bar.
.
can you pls post the link for this rom... i cant find it !!
Harsha Panchumarthy said:
can you pls post the link for this rom... i cant find it !!
Click to expand...
Click to collapse
http://get.aospa.co/official/oneplus2.
Simeone Can share the wallpaper??
Nice review..
Me too hoped from cm to aospa and I have nothing to complain about
Judging from Grarak's recent tweet, I think he's joined the team for this so he's bringing his goodness over from CM
User Actions
Following
Willi Ye
@Grarak
#stayparanoid #aospa2016
Click to expand...
Click to collapse
https://twitter.com/Grarak/status/740657372880875520
Teosan said:
Simeone Can share the wallpaper??
Click to expand...
Click to collapse
http://aospa.co/wallpaper-humble-huckleberry
.
Why CM Theme Engine and not Layer´s?
Thanks
Nuhro said:
Why CM Theme Engine and not Layer´s?
Thanks
Click to expand...
Click to collapse
Yeah.. this piss me off...
Nuhro said:
Why CM Theme Engine and not Layer´s?
Thanks
Click to expand...
Click to collapse
easy to theme. many theme devs support cm theme engine rather than layers. it doesn't require reboot to take effect like layers.
because aospa is based on cyanogenmod since the beginning and it's easiest for them to keep the original theme manager
manups4e said:
because aospa is based on cyanogenmod since the beginning
Click to expand...
Click to collapse
sure? I mean in the past its based on aosp?
Nuhro said:
sure? I mean in the past its based on aosp?
Click to expand...
Click to collapse
It was almost pure aosp...
Στάλθηκε από το ONE A2003 μου χρησιμοποιώντας Tapatalk
Can someone please post screenshots of the settings menus?
Would be great to see what the fuss is about
CounterC said:
Can someone please post screenshots of the settings menus?
Would be great to see what the fuss is about
Click to expand...
Click to collapse
as far as i can remember every other rom (paranoid too) was based on cyanogenmod, then they evolved.. this was since not all devices were (and are) compatible to pure aosp since they need caf modifications and so cyanogenmod was and is the best choice for a full compatible aosp
lol....
aosp and cyanogenmod are two different things, or i am wrong?
Nuhro said:
lol....
aosp and cyanogenmod are two different things, or i am wrong?
Click to expand...
Click to collapse
Quite different...
Στάλθηκε από το ONE A2003 μου χρησιμοποιώντας Tapatalk
Related
Presenting XHILIAR8 rom - an exhilarating experience
Features
Based on cm12 - All the lollipop goodies, plus all the CM goodies!
Custom notification background
Custom lockscreen background
OneHand Mode
Holo Themer - switch apps light/dark. Also change status bar color per app
Recents button position
Recents screen searchbar visibility
Navigation bar color
Disable other apps changing statusbar colour (always black)
Show version info in PackageInstaller
Screenshots
https://xhilar8.hamzahrmalik.com/screenshots/
Credits
CyanogenMod team, obviously
AOSP team
Mahdi ROM for the package installer version info
Planned Features
Make premium versions of holo themer and onehandmode work
Solid statusbar colour with the actionbar
Request for more!
Download link
http://xhilar8.hamzahrmalik.com#bacon
GAPPS
Just search for any lollipop gapps, they should work
Kernels
Comes with stock CM kernel
Confirmed working with latest AK, but no extensive testing
Report if others work, though they should all work because its basically CM
Installation
Download ROM
Reboot to recovery
Wipe data/factory reset - Only if first install, not when upgrading
Flash ROM
Flash GAPPS if desired
Clear cache and dalvik
Reboot
Have an exhilarating experience!
Bugs
None that i know
Source code
Source code can be found over at Github
https://github.com/XHILAR8
This is my first ever from-source ROM so do leave feedback
XDA:DevDB Information
XHILAR8, ROM for the ONEPLUS ONE
Contributors
hamzahrmalik
ROM OS Version: 5.0.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2014-12-03
Last Updated 2014-12-06
Another ROM to try?? Damnit there goes my free time lol
ek69 said:
Another ROM to try?? Damnit there goes my free time lol
Click to expand...
Click to collapse
Uploading is taking ages.....
Youre fine for a while haaha
Much alohas op
Awesome, let us know when the download link is ready
hamzahrmalik said:
Uploading is taking ages.....
Youre fine for a while haaha
Click to expand...
Click to collapse
The suspense is killing me
cm 12 5.0.1
wie lange dauert es.noch?
Guys I'm really sorry but the upload isn't working. I'll try in the morning in about 8.5 hours
Sent from my amazingly awesome OnePlus One using Tapatalk
hamzahrmalik said:
Guys I'm really sorry but the upload isn't working. I'll try in the morning in about 8.5 hours
Sent from my amazingly awesome OnePlus One using Tapatalk
Click to expand...
Click to collapse
Check your PM.
Why this rom is in original android development and not in android development like other lollipop roms?
Is there any difference?
Regards.
OP:
hamzahrmalik said:
Presenting XHILIAR8 rom - an exhilarating experience
Features
Based on cm12 - All the lollipop goodies!
Custom notification background
Custom lockscreen background
OneHand Mode
Holo Themer - switch apps light/dark
Credits
CyanogenMod team, obviously
AOSP team
Planned Features
Make premium versions of holo themer and onehandmode work
Make notification background roll properly
Custom navigationbar colours
Solid statusbar colour with the actionbar
Request for more!
Download link
Coming in about 30 mins, stay tuned, just waiting for build to compile and upload
Root
Flash this
http://download.chainfire.eu/636/SuperSU/UPDATE-SuperSU-v2.37.zip
GAPPS
Just search for any lollipop gapps, they should work
Kernels
Comes with stock CM kernel
Confirmed working with latest AK, but no extensive testing
Report if others work, though they should all work because its basically CM
Installation
Download ROM
Reboot to recovery
Wipe data/factory reset - Only if first install, not when upgrading
Flash ROM
Flash GAPPS if desired
Clear cache and dalvik
Reboot
Have an exhilarating experience!
Bugs
When the screen autolocks (but not when you lock yourself) lockscreen and notification centre backgrounds reset
OneHand Mode doesnt work AT ALL, this has been fixed but i don't have time to compile the ROM again
Report if you find others
Source code
I havent pushed the code to github but here are links to all the different repositories i used
https://github.com/cyanogenmod
https://github.com/CyanogenMod/android_device_qcom_common
https://github.com/CyanogenMod/android_device_oppo_msm8974-common
https://github.com/CyanogenMod/android_device_oppo_common
https://github.com/CyanogenMod/android_kernel_oneplus_msm8974
https://github.com/TheMuppets/proprietary_vendor_oppo
https://github.com/TheMuppets/proprietary_vendor_oneplus
https://github.com/CyanogenMod//android_device_oneplus_bacon
This is my first ever from-source ROM so do leave feedback
XDA:DevDB Information
XHILAR8, ROM for the ONEPLUS ONE
Contributors
hamzahrmalik
ROM OS Version: 5.0.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2014-12-03
Last Updated 2014-12-03
Click to expand...
Click to collapse
Holder threads are not allowed on xda..
just for u to notice
BirneKlub9 said:
OP:
Holder threads are not allowed on xda..
just for u to notice
Click to expand...
Click to collapse
I never meant to haha
Upload is working now. Guaranteed within 40 mjns. Guaranteed
Sent from my amazingly awesome OnePlus One using Tapatalk
03/12/14
First build, here you go
https://www.androidfilehost.com/?fid=95832962473397187
Remeber, do not turn on onehandmode, itll not work due to a bug which will be fixed in todays build
Will it work with multirom?
Oneplus One
hamzahrmalik said:
First build, here you go
https://www.androidfilehost.com/?fid=95832962473397187
Remeber, do not turn on onehandmode, itll not work due to a bug which will be fixed in todays build
Click to expand...
Click to collapse
The One hand mod will be released tomorow? I am very interested by this fonctionality!
bajen said:
Will it work with multirom?
Oneplus One
Click to expand...
Click to collapse
Yup
neftien said:
The One hand mod will be released tomorow? I am very interested by this fonctionality!
Click to expand...
Click to collapse
Today
Thanks, but it didn't work for me.
Oneplus One
bajen said:
Thanks, but it didn't work for me.
Oneplus One
Click to expand...
Click to collapse
nooo
later today
its not done yet
Not work here with multirom.
Gesendet von meinem One mit Tapatalk
Schrotty35 said:
Not work here with multirom.
Gesendet von meinem One mit Tapatalk
Click to expand...
Click to collapse
Exactly what I got.
Oneplus One
Welcome to Slim on the OnePlus 2
Whilst there are few ROMs available for the OnePlus 2, this originally "private build" is being released as a test build and to give you another choice. We know that things aren't perfect for any OnePlus 2 custom ROM.
Like most OnePlus 2 ROMs it is based off @Grarak's kernel and we would like to express our thanks for his hard work.
As such, this has the same issues of other ROMs eg fingerprint, permissive selinux.
Also, at this stage if there are any other slim related builds please feel free to post.
Please try it, enjoy it and let us know if there are issues BUT:
- Do not pester Martin - leave him be to get on doing what he is doing. I'm merely maintaining the thread, Martin does the hard work Martin wanted this to be fully functional before release, I persuaded him to let you have it - don't make us regret this!
- Logs or it didn't happen. We don't want pointless posts repeating the same things or not really telling us what the issue is.
- Keep it friendly and respectful (or you will be reported) but a little off topic is allowed.
Download
Source: github.com/slim-opt
What does not work?
- Fingerprint
- Laser Autofocus
- Enforcing selinux
XDA:DevDB Information
Slim based custom ROMs and mods for OnePlus 2, ROM for the OnePlus 2
Contributors
beany>, martinusbe
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Version Information
Status: Testing
Created 2015-10-02
Last Updated 2015-10-02
Reserved
Here is my build of SlimmerLP for OnePlus2. It is based on SlimLP with no added extras and a number of packages removed.
Esentially, a trimmed version of @martinusbe's build. If you try it, let me know what you think. Thanks and credit to Martin.
I'll provide the full list of packages removed later when I get back from work. But from my memory, these are removed:
Browser
MusicFX
Music
Wallpapers:
- Basic
- Galaxy4
- HoloSpiral
- MagicSmoke
- NoiseField
Screensaver:
- Basic
- PhotoTable
Exchange
Calendar
Camera2
Gallery2
Reserved
@martinusbe: "I have a SlimBased Tipsy if anyone wants to try https://www.androidfilehost.com/?fid=24052804347829495
Everything i have done to Slim is in there, and then some extras."
Reserved
Reserved
Great work @beany> and @martinusbe Thanks for your time
Well, here we go
Woohoooooooo
Sent from my ONE A2003 using Tapatalk
Great!
Source?
This is great! Thanks
Awesome. Been waiting for you guys with full layers support. Gonna try out next Monday
Hetalk said:
Awesome. Been waiting for you guys with full layers support. Wanna try out next Monday
Click to expand...
Click to collapse
Just in case anyone is wondering, LTE WORKS!
Nice to see Slim on OPT thanks Beany and Martinusbe and good luck
OmegaBlaze said:
Just in case anyone is wondering, LTE WORKS!
Click to expand...
Click to collapse
I received a call, and now my antenna is showing no sim card.
Log & Dmsg: https://drive.google.com/folder/d/0B4_NvTjxRtXmdjgwWE41ZGMtM3c/edit
Can one assume that the normal wipes would be in order? Also is there a set of gapps that we should use? Thanks. Can't wait to try. Loved this on the 1+1.
hllywd said:
Can one assume that the normal wipes would be in order? Also is there a set of gapps that we should use? Thanks. Can't wait to try. Loved this on the 1+1.
Click to expand...
Click to collapse
Yups, clean wipe (system+data+caches) for the 1st time. Subsequent versions can be dirty flashed, unless otherwise mentioned.
Any lollipop gapps(slim, TK, opengapps, banks, etc) should be fine. :good:
hllywd said:
Can one assume that the normal wipes would be in order? Also is there a set of gapps that we should use? Thanks. Can't wait to try. Loved this on the 1+1.
Click to expand...
Click to collapse
Hetalk said:
Yups, clean wipe (system+data+caches) for the 1st time. Subsequent versions can be dirty flashed, unless otherwise mentioned.
Any lollipop gapps(slim, TK, opengapps, banks, etc) should be fine. :good:
Click to expand...
Click to collapse
My personal dimension is obviously Slim GApps - zero version - by dankoman
OmegaBlaze said:
Just in case anyone is wondering, LTE WORKS!
Click to expand...
Click to collapse
Good to know, thanks. Enjoy!
Hetalk said:
Yups, clean wipe (system+data+caches) for the 1st time. Subsequent versions can be dirty flashed, unless otherwise mentioned.
Any lollipop gapps(slim, TK, opengapps, banks, etc) should be fine. :good:
Click to expand...
Click to collapse
Only 64 bit GApps will work. TK is for 32 bit only.
I recommend using Open GApps ARM 64.
Sent from my ONE A2003 using Tapatalk
Hi !
Is it based of Cm or OxygenOS please? Which version of AK should I flash?
Thank you!
Nizur said:
Hi !
Is it based of Cm or OxygenOS please? Which version of AK should I flash?
Thank you!
Click to expand...
Click to collapse
Like said in OP already, the kernel is CM based, so AK's CM Kernel should be the right choice.
Hello, I have decided to start my own rom, which I will build off what you suggest. Right it's a smooth and beautiful ROM.
Feel free to critique.
Check out the screenshots, that's where the beauty appears
Google Plus:
https://plus.google.com/communities/107126775554425330637
DOWNLOAD:
Download 1.6.1
http://forum.xda-developers.com/devdb/project/?id=12729#downloads
old:
https://drive.google.com/folderview?id=0B9uqk9InEzCYYXYybW9DNG0zWFE&usp=sharing#list
or click download on xda
If android.phone keeps crashing:
http://android.stackexchange.com/qu...opped-after-dirty-flashing-cm13/129946#129946
Gapps that work:
http://forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842
Current Status:
Rock Solid (check bugs)
CM13/android-6.0.0_r26
Custom Blur Launcher
New default wallpaper
Multi app split screen (enable in dev settings)
Kernel Config updated
Zip align
Odex
add my own version number to settings app
chromium (has ad blocker)
Build.prop
0fast (03,floop,ffmath) (incoming bugs)
BUGS SMASH
CM changes
Custom Blur Status bar
Custom Blur Multitasker
Updated Launcher Blur
OTA updater
Google Bootanimation
Original CM browser removed
Marshmallow open app animation (not built in cm13...)
Blur
In Next update:
Nothing yet
Current list of changes to add:
More transparency
Settings additions
Polly,graphite,optimized libcore ,vvlc qclang.
Status bar text greeting when you unlock the device
Marshmallow open app animation
something about addresses (read MAC address)
Something for recording the screen
Almoed colors (postponed)
Camera HALs from Sultanxda's rom (bread) (postpones)
Custom carrier (postponed)
Bugs:
Nothing known yet
Screenshots:
http://forum.xda-developers.com/devdb/project/?id=12729#screenshots
Source:
Kernel is stock until next update (when I will upload my kernel)
Everything else is scattered. Just for jerdog however, I'll upload it. This happens when I feel like it.
Credits (by size):
CM for obvious things
Qualcomm for more obvious things
serajr for amazing blur code, which I stole and spent hours trying to merge and update for my purpose
Sultanxda for his ota updater idea
~ And me, Aaahh
Visit https://forums.oneplus.net/threads/marsh-cm13-rom.405700/ for status updates
Wow very big size rom... I 'll try...
imam.krismanto said:
Wow very big size rom... I 'll try...
Click to expand...
Click to collapse
The extra 20 megabytes are from the snapdragon optimized loaded chromium browser
Aaahh said:
The extra 20 megabytes are from the snapdragon optimized loaded chromium browser
Click to expand...
Click to collapse
Stock camera still broken on HDR landscape...!
can it be installed as secondary rom in multirom?
custom carrier yeahh??.
Great Rom so far. My mobile data does not turn back on by itself when leaving WiFi network. Have to activate and deactivate flight mode to have mobile data back. Known issue?
desertfoxx said:
Great Rom so far. My mobile data does not turn back on by itself when leaving WiFi network. Have to activate and deactivate flight mode to have mobile data back. Known issue?
Click to expand...
Click to collapse
Cm issue
@Aaahh Finally you brought this rom here.
To all: please keep in mind CM13 is still under heavy development and new. So if you're missing any "cm" features, they'll be added at a later time by cm. Secondly, most of the bugs could be by introduced by CM so make sure you provide logs and keep an eye on other cm13 roms as well to make sure if it's a common CM bug or just in this rom. Thanks!
Sent from OnePlus One
Awesome. Would you like me to create a community in Google plus for your rom? @Aaahh
Sent from my bacon using Tapatalk
This is a awesome rom
AndroidPr0 said:
Awesome. Would you like me to create a community in Google plus for your rom? @Aaahh
Sent from my bacon using Tapatalk
Click to expand...
Click to collapse
https://plus.google.com/communities/107126775554425330637
Aaahh said:
https://plus.google.com/communities/107126775554425330637
Click to expand...
Click to collapse
Oh I see, there is one. Lol I'm the 3rd member [emoji2].
Sent from my bacon using Tapatalk
Google now on Tap crash error
Whenever I switch on google now on tap, it crashes and throws error unfortunately, google apps has stopped. Anyone else has this problem?
Appreciate any suggestion to resolve this issue.
Finally flashed this ROM and updated to 1.5.1..The ROM feels great. Smooth and fast..Good work dev..Will test the ROM more battery life and stability..Appreciate your effort..
salim1001 said:
Whenever I switch on google now on tap, it crashes and throws error unfortunately, google apps has stopped. Anyone else has this problem?
Appreciate any suggestion to resolve this issue.
Click to expand...
Click to collapse
What are the G-Apps u using I guess only bank gapps have now on tap working also heard somewhere that open gapps also works
Sent from my A0001 using Tapatalk
any recommendations for custom kernel with this rom?
karan2012 said:
What are the G-Apps u using I guess only bank gapps have now on tap working also heard somewhere that open gapps also works
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks, I had used bank gapps but let me try open gapps to be sure.
Can I get download link for default wallpaper when the rom boots, and latest version doesn't seem to be acquiring root
omaralkha99 said:
Can I get download link for default wallpaper when the rom boots, and latest version doesn't seem to be acquiring root
Click to expand...
Click to collapse
I had to turn root off then back on for it to work.
CYANOGENMOD 13 NIGHTLIES FOR THE ONEPLUS TWO
Working:
Booting!!
Audio
Screen
Camera
Mic
WiFi
Bluetooth
RIL
LAF
Fingerprint
Broken:
Install:
Wipe data, system, cache, dalvik cache
Flash ROM
Reboot
Download:
HERE
Source code:
GITHUB
XDA:DevDB Information
[6.0.1][CM13] Unofficial NIGHTLIES CyanogenMod 13.0 [FP], ROM for the OnePlus 2
Contributors
David_Vaz
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-12-14
Last Updated 2016-04-04
Reserved
Reserved
Thanks David, how to we install gapps? just flash it or its still broken?
Sent from my OnePlus 2 using Tapatalk
I think oppen gapps were broken
Gona try
gugas123 said:
I think oppen gapps were broken
Gona try
Click to expand...
Click to collapse
Can you link me to the slim gapps please?
gugas123 said:
I think oppen gapps were broken but slim were working fine.
Gona flash. Report in a few
Click to expand...
Click to collapse
can u link me slim gapps, which link u downloaded.. i dont see arm64 on slim gapps anywhere.. thank you
Sent from my OnePlus 2 using Tapatalk
Slim gapps
forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842
Android 6.0
Dont know if they work with 6.0.1
seangeezy12 said:
Can you link me to the slim gapps please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2792842
[GAPPS][6.0/5.1/5.0][arm/arm64] Official Slim GApps
[emoji6]
Wysłane z mojego ONE A2003 przy użyciu Tapatalka
http://forum.xda-developers.com/slimroms/general/gapps-official-slim-gapps-trds-slimkat-t2792842
Slim gapps
Build kicks ass! I used nano opengapps
Sent from my ONE A2005 using Tapatalk
Just finished install and setup, so far its awesome! Able to make calls and send texts right away I'll be sure to post anything that I come across, and thanks again!
Hey! Big props for getting CM13 to be essentially daily driver material on the OPT! One thing though, I'm getting a "Unfortunately, Google Play Services has stopped" spam all the time... Don't know if it's related to the Gapps package I used...
EpiclyEpic said:
Hey! Big props for getting CM13 to be essentially daily driver material on the OPT! One thing though, I'm getting a "Unfortunately, Google Play Services has stopped" spam all the time... Don't know if it's related to the Gapps package I used...
Click to expand...
Click to collapse
Hey,
I used this package and then selected which GApps I wanted when I was installing. Worked flawlessly for me
https://github-cloud.s3.amazonaws.com/releases/35368384/bd169d08-a1a3-11e5-9bc8-1991c40ba5ee.zip?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=AKIAISTNZFOVBIJMK3TQ%2F20151214%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20151214T022632Z&X-Amz-Expires=300&X-Amz-Signature=1b7cc944954eb58d9193be91f7ee48ee7f08956e572ae38f419c0c546d32d791&X-Amz-SignedHeaders=host&actor_id=0&response-content-disposition=attachment%3B%20filename%3Dopen_gapps-arm64-6.0-aroma-20151213.zip&response-content-type=application%2Foctet-stream
EpiclyEpic said:
Hey! Big props for getting CM13 to be essentially daily driver material on the OPT! One thing though, I'm getting a "Unfortunately, Google Play Services has stopped" spam all the time... Don't know if it's related to the Gapps package I used...
Click to expand...
Click to collapse
did u denied access to google services AUTO START?
Sent from my OnePlus 2 using Tapatalk
PetritH said:
did u denied access to google services AUTO START?
Sent from my OnePlus 2 using Tapatalk
Click to expand...
Click to collapse
I got it fixed, I used a 5.1 GApps package instead of a 6.0 one. Also, is the notification slider functional for you guys? I slide it and I feel the haptic response but there's no symbol in the status bar denoting if the phone is silent or in priority mode. I'm not sure if it is actually in the mode and it's just not showing the symbol or if the slider is just not functional the moment. What are you guys experiencing?
some bugs: camera with green line and in browser i am not able to download anything xd i tried because the gapps i had didnt work for me and the alert slider dont work well
Quick Q if possible
After Flashing Do we Disable Recovery (swipe to disable before reboot in the TWRP)modification by rom ? Because most of us have TWRP and in my understanding CM13 comes with it's own custom recovery.
russiandivxclub said:
Quick Q if possible
After Flashing Do we Disable Recovery (swipe to disable before reboot in the TWRP)modification by rom ? Because most of us have TWRP and in my understanding CM13 comes with it's own custom recovery.
Click to expand...
Click to collapse
Every CM rom has its own CM recovery.. You need to disable it from developer settings..
Ok so a few things from me: same green bar in camera app with lines, notification slider creates a haptic response when moved but no settings changed, Facebook and Facebook Messenger apps will not open and crash every 2-3 minutes when they try to auto-start (I had to uninstall them), the Google Phone app (downloaded from the play store, not the AOSP one) doesn't show a dialer when in-call so I have no controls and can't even end the call (I had to uninstall and revert back to AOSP one which works fine), and I am not able to change my mobile data monthly reset date. Everything else seems to work just fine
This thread can be used for tracking the progress of CM14 for the Mt2?
Note:
https://plus.google.com/u/0/photos/photo/109932426055289104206/6329128826640065154?icm=false
Link is not opening
plus.google.com/109932426055289104206
Nougat for Ascend Mate 2 MTL203
So this post caught my eye... Is someone working on Android 7.0 for the Ascend Mate 2 or is it already out there?
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
shm quit development on this but released the sources
https://bitbucket.org/S-H-M/android_device_huawei_mt2
https://bitbucket.org/S-H-M/android_kernel_huawei_msm8928
Sadly
http://forum.xda-developers.com/showpost.php?p=69194744&postcount=234
ScoobSTi said:
SHM, a dev who brought us TWRP and a few 6.0 ROMs, is working on 7.0. Understandably, he doesn't like people asking for ETA's so he'd prefer us not to bug him.
Also, since CM officially supports our phone, won't we be getting an official CM14 as well?
Click to expand...
Click to collapse
i think that would be after someone submits a working build.
Unofficial CM14.1
bgcngm said:
https://android.cmphys.com/cyanogenmod-mt2/
Click to expand...
Click to collapse
MT2-User said:
Unofficial CM14.1
Click to expand...
Click to collapse
Stock Camera works. Both front and rear ones. Gallery app works.
DT2W also works!
Clean flash plus Open GApps nano package as shown.
Battery life: with profiles settings as Performance and Tasker running in the foreground.
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
Good to see the great community behind this phone is still developing... Thanks guys... May you have a Happy MT2 New Year...
MT2-User said:
Battery life: with profiles settings as Performance and Tasker running in the foreground.
Click to expand...
Click to collapse
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
nate5711 said:
@MT2-User what's your feel for this beta rom is it worth a try, how easy is it to go back to your cm13 back, and this new version of twrp how does it work???
Thanks for any info you can share...
Click to expand...
Click to collapse
@nate5711: I think this CM14.1 runs more smooth than CM13 (official). It hasn't crashed yet; previously CM13 rebooted occasionally. The battery life is very nice also: 9-10 hours SOT, similar to CM13.
I have been using TWRP by Matt (this CM14.1 Developer) for a while, so I didn't see any problem with it (the previous version is 3.0.M5-0 released on July 19; https://android.cmphys.com/twrp-mt2/). The only thing is TimeService which led to inaccurate time in TWRP, but I always named Nandroid backup myself which is much shorter while with more information. It has been fixed as Matt stated:good:
I did make a Nandroid backup of CM13 using TWRP-3.0.M5.0 and I am sure there is no problem to switch between this CM14.1 and CM13 without loss of data. I tried both clean and dirty flash of CM14.1 (over CM13), and currently I've been running the dirty-flashed one flawlessly. I tried switch between CM14.1 and CM13 with TWRP and there's no problem at all.
Sure, as I mentioned earlier, LiveDisplay night mode doesn't work. There's no CMTE either. Otherwise everything is good on my end.
Thanks to Matt for his wonderful job! :good::good::good:
BTW, Matt has his CM13-Dec 26 nightly available to us also and he said the Camera (CM13) has been fixed. TBH, I haven't tried his CM13-20161226 yet since I am very satisfied with his CM14.1-20161225.
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Sent from my Ascend Mate 2 using Tapatalk
hopkins31 said:
Dirty flashed runs fine also had to re flash gapps to get it to fully boot but other then the missing theme engine it seems way smoother then the last good build of cm 13 great work matt and thanks for keeping this phone alive
Click to expand...
Click to collapse
Yes, arm 7.1 GApps required even for dirty flash over CM13.
Thanks for the helpful info, dl the rom and I'm very much enjoying it..
Thank you for providing the latest build. I have installed it and seems to be working fine. Need to use it for a few days to cycle the battery to know how good is the backup.
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
divhandyman said:
Thank You so much for the update so far is very smooth. Is anyone else having the camera randomly popping up during a phone call? I have tried to download gapps again and reflashed still having the issue. Am i missing something in the settings?
Click to expand...
Click to collapse
Disable the tap to wake setting under display will stop the camera popping up.