Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
I am having exactly same issue with my Moto E XT1022
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
MusaddiqueAli said:
Hi, I am having exactly the same issue with Moto E 1st Gen. I just want to if you were ever able to revive your mobile? Please do reply.
Click to expand...
Click to collapse
No..Failed to make it work..
Okay. Thanks for the swift reply.
coder0000 said:
No..Failed to make it work..
Click to expand...
Click to collapse
But by the way, did you try the QFIL method.
MusaddiqueAli said:
But by the way, did you try the QFIL method.
Click to expand...
Click to collapse
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Okay. Thanks for the reply......
sasukay said:
Yes you can revive your phone through QFIL. I had. Lenovo a6000 plus and in case of hard brick (when you can't access recovery or fastboot), you can still revive your phone through the Diagnostics port. You need to have a ROW firmware file in my case. I don't have a link for your device. You have to search that for yourselves. But, I just want to give you some hope.
In case, you want to see how this works, you can see the 2nd method. Other methods might work too. CHECK OUT THIS LINK.
Click to expand...
Click to collapse
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
MusaddiqueAli said:
And, and about the ROW Firmware that you mentioned, I came to know that ROW is mostly in the case of Lenovo mobiles, whereas in case of Moto E, I didn't find anything with ROW firmware.
But, I would like to know that the ROW Firmware that you mentioned, is it in .zip file format or something else?
Click to expand...
Click to collapse
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Thnaks.
sasukay said:
For me the format was .row only. I checked google for it and it's not so for others I guess. I've scoured some links for you, which might help, I'm not sure though. Specially, the firmware files, I don't know if these are what you need. But, you can have a look and atleast try unbricking your device. Good luck!
1) MOTO FIRMWARE FILES
2) Tutorial 1 (I would prefer this).
3) Tutorial 2
Click to expand...
Click to collapse
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
MusaddiqueAli said:
:good: Thank you very much for the links. I'll try those files. Hope it works.
One thing I am confident about now after my recent research online and here in XDA is that, my phone can be unbricked (whether QFIL method or otherwise) however severe the problem is.
Click to expand...
Click to collapse
Plz Let me know if you succeed..
Please help Me.... I'm having the same problem.. Anyone found out the solution?
Can qfil be used?
If qfil can be used, please give me link for the. MBN, rawprogram0.xml and patch file for moto e xt1022
FIX suggestion
If anyone has another working Moto E then we just need to extract the internal backup which can be used to unbrick our phones. I'm trying from past 2 weeks to find a user with working moto e but couldn't find one..
If found please contact me..
Thank you.
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Am also having similar kind of problems with my Moto E, apart from the notification light blink once when long press the power button. In my case, notification light is blinking only when connected to charger.
Waiting for your problems to be resolved [emoji41]
Sent from my Lenovo P2a42 using Tapatalk
coder0000 said:
Moto E is not displaying anything..Notification light blink once when long press power button or while connecting to usb cable..
But my PC detects the phone when connected..Device Manager showing Qualcomm HS-USB QDLoader 9008 .
PLEASE HELP!!!
UPDATED:
I heard that by using QFIL,all qualcomm mobiles could be flashed without fastboot..
Is it possible for MOTO E?
Click to expand...
Click to collapse
Mine was also the same case , Downgraded to KitKat from lollipop received an OTA and bang! I got bricked!
My device gets detected as QUALCOMM HS-QDLOADER 9008 in COM ports which is also known as EMERGENCY DOWNLOAD MODE. I have rescued many phones from this incl. Nokia Lumia Devices(9006 and 9008)through Care Suite, Xiaomi devices but their Firmware allows them to flash from Emergency Download Mode.
But Motorola Has only released the FASTBOOT FIRMWARE which doesnt provide the way to Load FW in EDL mode, blank-flash files are leaked for the Moto G which does the same thing! But Blank-Flash are not available for Moto E which can resue you from Emergency DL mode . I tried using different tools like QPST an all but no luck.
The Solution till now is through JTAG/ATF recovery only which writes the eMMC through JTAG interface and RESTORES THE BOOT. It needs a specialised HW and can be done by a Mobile Technician for a small amount. This is the only solution i found though it was 1 yr ago
Related
My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
nilanko said:
I am very sorry to say but your phone is hard bricked. You must have tried downgrading/upgrading firmware in a fatal pathway. Only thing you can do is getting your motherboard replaced.
Click to expand...
Click to collapse
sir plz tell me how to do it ...?
Go to service centre for a new motherboard!
vsaik1999 said:
My moto e is not starting not charging after the battery is completely to 0%
i removed and placed but also no use
not starting/charging
no boot logo and no battery charging logo
plz tell me what to do???
never shown display
.When I connect charger to it to my laptop, white led blinks for 1 second.. It shown qhsusb_bulk device. I updated its driver successfully with Qualcomm HS-USB QLoader 9008.
Click to expand...
Click to collapse
sir how to downgrading/upgrading firmware without entering into fastboot mode
hi!
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
vsaik1999 said:
sir how to downgrading/upgrading firmware without entering into fastboot mode
Click to expand...
Click to collapse
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
marianoasis said:
there's one post here, need jflash drivers (box) and flash with USB
i don't you how to but i did it in a nokia...
Click to expand...
Click to collapse
It does not work. Unbricking Moto E is not possible
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
sir it is not "on"ing and it not going into fastboot also
vsaik1999 said:
sir it is not "on"ing and it not going into fastboot also
Click to expand...
Click to collapse
It won't because its hard bricked. U need a new motherboard.
nilanko said:
Using custom recovery such as TWRP and then flashing TWRP-flashable firmware which you can find on the forums.
It does not work. Unbricking Moto E is not possible
Click to expand...
Click to collapse
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
PoseidonKing said:
It is possible. Search for the thread by Lucas Eugene for unbricking moto e.
Hit Thanks if I Helped!!!
Click to expand...
Click to collapse
I followed his guide and after that, my computer stopped detecting my phone completely, not even that "bulk" thing anymore. It was totally dead.
Actually I don't think you phone is bricked because the same thing is happening to me too but I kepp on removing and disconnecting till the phone starts boot animation so not a brick by the way did you flash any roms?? Cause I'm running mm rom BTW this problem recently started with me so I'm looking for better suggestion s
What did you do to your phone before this happened?
This event occurred when my phone was completely at 0%.
The solution was to just keep it charging overnight like plugged in.
May or may not work for you.
I am new to this forum but have very high hopes that someone with more technical skills will be able to help me with my LG G watch
To start , i bought this new LG G watch and did not turn it on for 3 months after purchase , then i tried to run it on and it never came up , left it on charging overnight many times ,tried reset button and all other tricks i could find with help of Mr. Google except opening it .
So i plugged it in laptop USB port and at first it was showing some "Bulk" in device manager but it managed to get drivers automatically and now shows as HS-USB QDloader 9008 in device manager , than i again asked Mr. Google to help and read several forums and tricks and tips about getting device out of this phase using QPST etc. nothing worked so far.
I also tried LG flash tool but that also fails .
now i am here seeking help , anyone have any idea on how to get this device turned on ?
Is there someone who figured this??? Please help .. I did nothing it has happened suddenly. Now only showing this QDloader 9008.
sasadara said:
Is there someone who figured this??? Please help .. I did nothing it has happened suddenly. Now only showing this QDloader 9008.
Click to expand...
Click to collapse
I hate to say this but, you might be screwed. You should send it in or get a new watch.
Sorry.
drewmrk8 said:
I hate to say this but, you might be screwed. You should send it in or get a new watch.
Sorry.
Click to expand...
Click to collapse
But I didn't do anything. Sadly we have no option here in my country to send the watch back. i have seen that there are threads which unbrick from this state. But unfortunatly all the files are related to LG G3 and G2 and so on. So I don't have necessary files for unbrick Qualcomm. Hope if i could get any help :?
sasadara said:
But I didn't do anything. Sadly we have no option here in my country to send the watch back. i have seen that there are threads which unbrick from this state. But unfortunatly all the files are related to LG G3 and G2 and so on. So I don't have necessary files for unbrick Qualcomm. Hope if i could get any help :?
Click to expand...
Click to collapse
I don't think this would work, but hey, it's worth a shot.
droidsavvy.com/unbrick-qualcomm-mobiles/
Ya I tried before I post this, but it didn't success, im getting an error like this
Sahara Connecting …
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
v QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
No answers for that. May be the incompatible *. xml
sasadara said:
Ya I tried before I post this, but it didn't success, im getting an error like this
Sahara Connecting …
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
v QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
No answers for that. May be the incompatible *. xml
Click to expand...
Click to collapse
I was just searching around and I can't seem to find anything on the topic of an LG G Watch hard brick. Just wondering, did you buy the watch from eBay or a used one from Amazon etc...?
No I have brought from my friend. I have used this like from more than a year ago without any problem. normally i forget to charge. So it will completely out sometimes. Y]Day before yesterday also I forgot to charge. But yesterday I tried to charge, but it didn't turn on. I couldn't charge it. So I just connected to the computer then I saw this mode.
sasadara said:
No I have brought from my friend. I have used this like from more than a year ago without any problem. normally i forget to charge. So it will completely out sometimes. Y]Day before yesterday also I forgot to charge. But yesterday I tried to charge, but it didn't turn on. I couldn't charge it. So I just connected to the computer then I saw this mode.
Click to expand...
Click to collapse
It's also possible that it may just be dead for good, or it might be a defective model.
Hi guys!
I think I did something stupid while updating my XT1650-03 to Nougat.
What I did was manually flash stock nougat ROM (retbr) through fastboot, following the instructions within flashfile.xml, but, as I've read some bad things about the updated bootloader I stupidly decided not to flash it. The result is that it won't power up, even though I've tried: pressing power+vol. down; power; plugging the charger; fastboot commmands ( I was hoping it was just the screen that was off); to no avail.
I've noticed that when I plug the usb cable to the computer it plays that sound of connected devices.
Any suggestions? I'm probably going to have to take my device to authorised repair (off warranty, I know), but they usually take weeks to fix anything, so you guys are my best bet for now.
Thanks in advance!
martonto said:
Hi guys!
I think I did something stupid while updating my XT1650-03 to Nougat.
What I did was manually flash stock nougat ROM (retbr) through fastboot, following the instructions within flashfile.xml, but, as I've read some bad things about the updated bootloader I stupidly decided not to flash it. The result is that it won't power up, even though I've tried: pressing power+vol. down; power; plugging the charger; fastboot commmands ( I was hoping it was just the screen that was off); to no avail.
I've noticed that when I plug the usb cable to the computer it plays that sound of connected devices.
Any suggestions? I'm probably going to have to take my device to authorised repair (off warranty, I know), but they usually take weeks to fix anything, so you guys are my best bet for now.
Thanks in advance!
Click to expand...
Click to collapse
Don't even bother going to the service center. The same happened with my device and they refused to give me the warranty. Motorola voids it the moment you get the unlock code. So my device was dead for 3 months. And I fixed it few days back. The good news is that your PC is detecting the device.
I will post the solution with a new thread in few minutes.
Manish54 said:
Don't even bother going to the service center. The same happened with my device and they refused to give me the warranty. Motorola voids it the moment you get the unlock code. So my device was dead for 3 months. And I fixed it few days back. The good news is that your PC is detecting the device.
I will post the solution with a new thread in few minutes.
Click to expand...
Click to collapse
Thank you so much for your reply, it's very much appreciated! I didn't think anyone would reply that soon
I'll wait for your thread!
There ya go
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
So, I'm totally lost.
As I posted in the thread above, even though Manish54 has been very kind to help, that solution did not work for me, so I've been trying to find another way. The thing is, this issue is beyond my comprehension. I'm not new to flashing and stuff, but I am new to moto Z. I understand that I should've been more careful and also have read a bit more before starting to mess with a new device, so feel free to judge me .
For instance, I don't know what fsg.mbm, adspso.bin, BTFM.bin and oem.img are for, since my old phone didn't have those (or at least I didn't need to mess with those), and I also don't know it they're relevant to my problem. If anyone could point me to some info on that, it'd be greatly helpfull.
Besides that, I've found mentions to tools like qualcomm's BoardDiag and QPST QFIL, but I'm not really sure if they apply for my situation, or even if I can manage to adapt the guides I've found to work on the Moto Z.
Any help is very much appreciated!
Thank you!
Solved!
I managed to unbrick my phone.
If anyone needs it, the details are in the thread made by Manish54.
https://forum.xda-developers.com/mo...rick-moto-z-hardbricked-t3590133#post71876064
Is there any way to solve it ?
Hillterpty said:
Is there any way to solve it ?
Click to expand...
Click to collapse
Did you even read the posts?
Ajuda
martonto said:
I managed to unbrick my phone.
If anyone needs it, the details are in the thread made by Manish54.
https://forum.xda-developers.com/mo...rick-moto-z-hardbricked-t3590133#post71876064
Click to expand...
Click to collapse
Amigo tb estou com o meu morto, me ajuda, qual o modelo do seu.
https://uploaddeimagens.com.br/imagens/sem_titulo-jpg--9130
hard brick moto z
Manish54 said:
There ya go
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
Click to expand...
Click to collapse
hello friends, I'm with hard brick on the moto z xt1650-3
due to an update via ota, when my bootloader was unlocked I was in the android oreo (8.0), however I went back to 7.0, due to an update via ota, the device did not call anymore, I tried several blankflash and nothing, I am very annoyed at this, thinking of dropping my hand, I took some assists nobody can solve, I hope someone here can help me, at least inform me something that is useful to recover my cell phone.
my cell phone is still recognized as "qualcomm hs-usb qdloader 9008 (com3)
please join the telegram group:
https://t.me/motozz
Hey, my phone was dead two (brazilian xt1650-03), i spent three days struggling until i could bring him back. Thanks to the help in this forum. Your phone probably has the latest update opls27-76-51-7-july, so it must work:
first, you have to bankflash it with blankflash_OPL_27.76-51, its in the 30+ page topic tutorial here in this forum. Very important, must be in windows 7 or 8, with usb2.0
second, use this rom opls27-76-51-7-july-moto-z. it must work because its the last one. Its not brazilian, evething works fine but the netflix app didnt , but hey, at least our phone is alive again.
The secret is in the version of the firmware instaled before the brick, it must be the rom installed or latest to work
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
CP100 said:
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
Click to expand...
Click to collapse
Hello!
When you say that the phone won't turn on at all, do you mean that the LG logo does not appear when you attempt to turn it on? In any case, your phone seems to be recognized by your computer, so download LGUP (with UPPERCUT) and see if they can communicate. You can flash the stock firmware using the .kdz files linked by @autoprime in his All-in-One G5 thread. I believe the firmware made for the RS988 Brightpoint (BPT) variant doesn't have anti-rollback protection, so you'll have the most luck flashing it. Make sure, though, if you go that route, to flash the non-carrier firmware afterwards.
NextDroid said:
Hello!
When you say that the phone won't turn on at all, do you mean that the LG logo does not appear when you attempt to turn it on? In any case, your phone seems to be recognized by your computer, so download LGUP (with UPPERCUT) and see if they can communicate. You can flash the stock firmware using the .kdz files linked by @autoprime in his All-in-One G5 thread. I believe the firmware made for the RS988 Brightpoint (BPT) variant doesn't have anti-rollback protection, so you'll have the most luck flashing it. Make sure, though, if you go that route, to flash the non-carrier firmware afterwards.
Click to expand...
Click to collapse
The Logo doesn't appear, after being plugged in to my PC, it just gets a little warm.
As for the LGUP with uppercut, I ran the program and it gives me a message of it saying "no handset connected". It is currently on COM3 in device manager named "Qualcomm HS-USB QDLoader 9008".
CP100 said:
The Logo doesn't appear, after being plugged in to my PC, it just gets a little warm.
As for the LGUP with uppercut, I ran the program and it gives me a message of it saying "no handset connected". It is currently on COM3 in device manager named "Qualcomm HS-USB QDLoader 9008".
Click to expand...
Click to collapse
Interesting. This reminds me of APX mode from the NVIDIA Tegra devices.
I think there's a Qualcomm-developed firmware flashing tool that can detect the device via the COM3 port. I cannot recall the name, but if you find it, you should give it a try.
I also have same issue flashed wrong Rom showing qualcomm 9008,complete black screen not even showing charging also,no recovery mode no download mode.is there any solution for it.
balu9999 said:
I also have same issue flashed wrong Rom showing qualcomm 9008,complete black screen not even showing charging also,no recovery mode no download mode.is there any solution for it.
Click to expand...
Click to collapse
I don't know if they exist. You need qfil and whatever firmware parts and edl recovery files. Your fire hose programmer for your chipset.
I've read some guys claim sd card method. But I've never done it on this device
Where you ever able to unbrick the phone?
I am currently experiencing the same issue, the best method that would seem to work so far is through QFIL but I can't find the firehose file.
same problem, any help?
CP100 said:
It's been hardbricked for almost a month now. I've looked everywhere on how to unbrick this specific model on XDA but didn't find anything.
I know it's been done for models like the V10, G3, etc.. so I thought there might be some hope from bringing my phone back to life.
I goofed up accidentally installing the wrong ROM for the phone. It had TWRP and all but the phone won't turn on at all.
Does anybody have system dump files for the RS988?
Click to expand...
Click to collapse
I have the exact same problem but i have the h850
Hi, I have one which was on Display, and is running in Full Retail mode. I have contacted JBL about doing a factory reset, but they said they come from the factory like that. I have opened it up, and it looks like a full working unit, and the board is labelled 40-SPARRO-MAD4G.
I tried holding either volume button down when starting, and when holding the right volume button down, the green android appeared with an error symbol.
Their is a Micro-USB port underneath marked service, but I have so far not been able to track any firmware updates/roms/images etc? I plugged it into a PC, and it said the driver was a
qualcomm HS-usb android diag 901d
I figure if I can't use it as a smart display, they'll make a great set of speakers.
Did you figure out how to use this in any way? I have a similar issue.
sudds65 said:
Did you figure out how to use this in any way? I have a similar issue.
Click to expand...
Click to collapse
Not at all sorry. I was looking at trying to install Google Assistant on there, from scratch but it's beyond my expertise. I tried looking for a rom/firmware update, but nothing. If I had access to working one, I might be able to back up the rom onto a PC via the Micro-USB port.
Darn, alright. I ended up selling the thing. Got one from an auction, oh well, I will just buy a Nest Max
Hi. I have a same issue. It on Demo mode and I tried to factory reset but no hope. Does anyone have solution to change or flash Rom on this. Thanks
Fixed
I know how to fix this. But this requires firmware from the desktop. Need to make a backup from the desktop and download to the demo version.
And i know how to go into mode to download the firmware but i don't have it and i can't find it anywhere.
andrukarc said:
I know how to fix this. But this requires firmware from the desktop. Need to make a backup from the desktop and download to the demo version.
And i know how to go into mode to download the firmware but i don't have it and i can't find it anywhere.
Click to expand...
Click to collapse
Well can you share what you have found? I too have a demo model of this display I would love to get working. If what you propose seems viable I'm willing to buy a retail model with the aim of pulling off the rom and returning it to the store later.
Nousernamesleft said:
Well can you share what you have found? I too have a demo model of this display I would love to get working. If what you propose seems viable I'm willing to buy a retail model with the aim of pulling off the rom and returning it to the store later.
Click to expand...
Click to collapse
Hello Friend. We just need to get the recovery from the working device. And download the demo model. I'm sure 95% that it will work. Sent me a private message.
Can you tell me how to use it?
Nousernamesleft said:
Well can you share what you have found? I too have a demo model of this display I would love to get working. If what you propose seems viable I'm willing to buy a retail model with the aim of pulling off the rom and returning it to the store later.
Click to expand...
Click to collapse
I have the same product and problem.
If you solved, can you tell me how?
Just ordered one of these speakers. I will have a Brand new boxed set in about day or 2. Tell me how I can pull the rom off so I can share it on this thread.
navman27 said:
Just ordered one of these speakers. I will have a Brand new boxed set in about day or 2. Tell me how I can pull the rom off so I can share it on this thread.
Click to expand...
Click to collapse
This is the information I was sent via PM from andrukarc . No idea if it is correct or not.
here is a link on how to extract a backup
https://forum.xda-developers.com/gen...-root-t3570178
I can't do it because there is no place to buy in my country. JBL link View they are not supported in Ukraine and so they are not imported here, but I have a demo model and I would also like to revive it.
If so backup then we flash the device and it will become like a regular model.
I know how to go into firmware mode and solder for this program.
.
you made a backup?
anymore movement on this im curious how things are panning out
Nousernamesleft said:
This is the information I was sent via PM from andrukarc . No idea if it is correct or not.
here is a link on how to extract a backup
https://forum.xda-developers.com/gen...-root-t3570178
Click to expand...
Click to collapse
Hi, the link didn't work, however there was this one : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178
Still, no update on a clean firmware, that is not a retail version?
Any updates on this pretty please?
Darug2300 said:
Hi, the link didn't work, however there was this one : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178
Still, no update on a clean firmware, that is not a retail version?
Click to expand...
Click to collapse
Hi, I have 2 devices JBL Link View - 1 working and 1 in demo mode. I tried to get dump from working device (I used metod from : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178), but whithout result. Both devices are detected in the computer as HS-USB QDLoader 9008 (volume buttons + \ - when turned on). But in eMMC Software there is always error 0x80004005 when I try to switch device to download mode. If someone helps me solve this problem, I will receive the firmware and post it here.
Irek66 said:
Hi, I have 2 devices JBL Link View - 1 working and 1 in demo mode. I tried to get dump from working device (I used metod from : -https://forum.xda-developers.com/general/rooting-roms/how-to-backup-qualcomm-phone-root-t3570178), but whithout result. Both devices are detected in the computer as HS-USB QDLoader 9008 (volume buttons + \ - when turned on). But in eMMC Software there is always error 0x80004005 when I try to switch device to download mode. If someone helps me solve this problem, I will receive the firmware and post it here.
Click to expand...
Click to collapse
I tried win7 and win10. No results.
Looking to help if I can, as I got this on an auction I didn't fully read. My brother does have a full retail version thou.
Today I accidentally erased the system partition via Fastboot. And now it doesn't show the demo clip. This means I need to load the system.img into it . But how to pull this partition from the working device - I don't know yet. I keep looking for a method. I think JBL use Snapdragon 625 APQ8053 and Android Things OS. If I could get developer mode I would use ADB to download system.img from working device
Thx for all your efforts so far!