Hi all. I keep getting this error after rooting, installing SuperSu and TWRP. When I try to flash a ROM (any ROM), I get stuck. I've tried the latest Resurrection and CM ROMS. Will someone please help me past this last hurdle? Thank you!
I can't upload or link the screenshot but here's the info:
Can't install this package on top of incompatible data. Please try another package or run a factory reset.
Which I have done several times.
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
maxprzemo said:
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
Click to expand...
Click to collapse
That did the trick! I put Resurrection OS on there and all is well except for finding a stable GAPPS build.
Not working for me, my device is KII-L21 on stock rom and I'm trying to install official CM13, my device is rooted and have twrp
If your device is wiped It isnt rooted.. Wipe it dont forget Cache partitions try again.
maxprzemo said:
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
Click to expand...
Click to collapse
Bro, me sirvió. Muchas gracias
It really works, thanks dude
I think it all boils down to doing a format /system.
Next time I will try that!
Edit: I was wrong, the format /data is needed.
If I don't to the reset I am one of those that always gets error 7.
unmount ->system, data, cache :good:
As I already posted at https://forum.xda-developers.com/showpost.php?p=70851854&postcount=534,
I am able to avoid the Error 7 (inconsistend data) by switching to gapps mini before installing the update.
Since the experiental build, I do the following within one TWRP session: install latest gapps mini, install the upgrade to latest lineage-nightly and reinstall latest gapps stock.
So far it works for me.
Do a clean install wiping system, data, cache and dalvik cache before flashing a new ROM is adviced, it will avoid most of problems. For the GApps, I recommend OpenGapps Pico version to install the minimal needed, then you can install the other Google apps you need from the Play Store.
Guys I need some help here. I'm running into the same TWRP error 7 situation. The phone is unlocked, and I've installed kiwi_twrp_3-21_recovery. The model of the device is Honor X5 (KIW-CL00)
I've tried flashing both ResurrectionRemix-M-v5.7.4-20161220-kiwi & lineage-14.1-20170419-nightly-kiwi-signed ROM, whether it's flashing from the phone's storage or from the SD card, both ROM are giving me the same error code.
I tried formatting the system, advance wipe function (Dalvik & Cache & Data & System), now I don't even have the default factory ROM on my phone, but I'm still getting the error 7 code.
Please help. Thanks in advance.
U need to edit updater script to remove assert for device check
Error7 and then "could not find meta inf..."
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
robert_web said:
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
Click to expand...
Click to collapse
Did you try this?
Backup ==> select all ==> Swipe to Backup
Wipe ==> Advenced Wipe ==> /System + /Data + /Cache Confirm "Swipe to Wipe" . Try installing again ROM
robert_web said:
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
Click to expand...
Click to collapse
Pleasw upgrade to TWRP 3.1.1
Sent from my Honor 8 using XDA Labs
robert_web said:
Huawei KIWI Honor 5x
KIW-L21 EMUI 3.1
I installed
TWRP3.0.2-0 lineage-14.1-20170607-nightly-kiwi-signed.zip ->Error 7
then
cm-13.0-20160904-NIGHTLY-kiwi.zip and cyanogen recovery the same -> Error 7
Error 7 and if I try to delete assert, the next message is "could not find meta inf/com/google/android/update-binary"
My last problem
If I unzip and zip without change anything the Install message is "could not find..." I try it whit Linux 16.4 Win10 Win7 and 7Zip. all the same.
I can not change the updater-script without unpacking the File
Can anybody Help
Click to expand...
Click to collapse
U need to edit and repack everything . And do remember that if u mess a single letter it will give an error
Thanks
Sure I wipe advanced by every attempt.
Twrp 3.1.1 the same problem.
But you have right, the Solution for me is not to unzip and zip the file for delete the "assert". Only the way to edit without unpack the File in the Ubuntu "ARCHIVMANAGER" works.
Now it is installed but now I am in a bootloop But this is an other Problem. One step after another.
robert_web said:
Thanks
Sure I wipe advanced by every attempt.
Twrp 3.1.1 the same problem.
But you have right, the Solution for me is not to unzip and zip the file for delete the "assert". Only the way to edit without unpack the File in the Ubuntu "ARCHIVMANAGER" works.
Now it is installed but now I am in a bootloop But this is an other Problem. One step after another.
Click to expand...
Click to collapse
try again by making a clean flash
robert_web said:
Thanks
Sure I wipe advanced by every attempt.
Twrp 3.1.1 the same problem.
But you have right, the Solution for me is not to unzip and zip the file for delete the "assert". Only the way to edit without unpack the File in the Ubuntu "ARCHIVMANAGER" works.
Now it is installed but now I am in a bootloop But this is an other Problem. One step after another.
Click to expand...
Click to collapse
So , plz upload the updater-script here . I will edit and forward u . Later repack everything as is, lets see if that works . If not , i will build a rom for u especially
Thanks its work fine now. It was my fault, I updated from Lollipop not from Nougat. So I used Huawei Firmbootextraktor extract system.img cust.img recovery.img and boot.img and on my SD I copy ../dload/update.app version B140 Android 5.1.1. Then the Handy started I updated EMUI 4.0 and Android 6.1. Now works my Handy with all zip files where I delete the asserts.
Maybe was the problem, in the assert is wrote "kiwi" and my Handy is a "KIW-L21"
Related
Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
-- Installing: /sdcard/Rom.zip
Finding update package...
Opening update package...
E: Can't open /data/media/0/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing
Alvarogb91 said:
Hello everyone a month ago I install a rum cyanogenmod m8 from my recovery in Zip install option but yesterday I wanted to try installing slimkat with a clean install wiping everything in internal memory but to go back to the install zip option and try install from sd memory I went out a next mistake
- Installing: / storage/sdcard1/Rom.zip
Finding update package ...
Opening update package ...
E: Can not open / storage/sdcard1/Rom.zip
(bad)
Installation aborted.
this happened to me after I delete all data from the phone doing a mega wipe with a zip file but my big problem is that after I could no longer install from sd and my only option to revive my phone was installed by the stock version odin but I do not like the stock so I want to install Cyanogenmod SlimKat or 11 M8 but I can not for the problem that gives me the recovery.
it gives me another error is also:
e: error mounting / system!
e: can not open sdcard
someone help me?
PS: try the 3 types of recovery as I know cwm, TWRP, and Philz but three recoverys not allow me to install any zip file
PD2: The sdcard refers to the internal memory and because of this error can not enter or see what interda q in my memory from the recovery but also tried d install an external memory and nothing
Click to expand...
Click to collapse
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards
necrosauron said:
you must update your recovery..
that's the usually mesage when you are not up to date whit your recovery
best regards
Click to expand...
Click to collapse
I installed the new version of recovery but I have the same problem
Alvarogb91 said:
I installed the new version of recovery but I have the same problem
Click to expand...
Click to collapse
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards
necrosauron said:
mmm maybe your download was wrong...
try to download again the file...sometime happens
regards
Click to expand...
Click to collapse
Thanks the file was the problem, I have download again the file and the install was succesfull.
Alvarogb91 said:
Thanks the file was the problem, I have download again the file and the install was succesfull.
Click to expand...
Click to collapse
ok bro...glad to help you...:laugh:
hit the thanks button for the next time..
regards:good:
I try update via recovery ( put this file to external strorage only )
1. boot to recovery mode hold Power + Volume Down button
2. Using the Volume buttons to scroll and the Power button to select, choose "Enter
recovery mode
3. Choose apply update from external storage
4. select "reboot system now after finished update
http://fota.asus.com/delta_package/.../WW_PF500KL-12.2.2.43-13.6.5.30-fota-user.zip
This screenshoot from my phone +Station
Error Status 7
I have error:
System partition has unexpected contents
E:Error in /sdcard/UL-ASUS_TOON-WW-13.6.5.30-user.zip
(Status 7)
anyone can help me?!
Same issue as well
Getting the same "System partition has unexpected contents (Status 7 )" any idea whats wrong?
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Gizoid1337 said:
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Click to expand...
Click to collapse
Thanks ! It worked for me
I reinstalled ver 12.2.2.43 which really is my current version, and then proceed to install MM 13.6.5.30 with success
Gizoid1337 said:
It's most likely because of root, and any changes like installing busybox, or having edited the build.prop . I had to wipe system on my padfone x reinstall lollipop 43 then install the marshmallow ota, then root 2.68 then dd the Xmodem.img I found for USA radio bands and the twrp 3.0.0.0 img to get everything working.
Also I'm not sure if flashing without wiping data partition works the same as well as starting from scratch, but I did do it all in one shot and first without data being wiped and worked fine. But I then wiped everything to see how much space I could recover in app storage. I saved myself about a gigabyte and a half to have a total of 4gb remaining after apps were installed (i have a lot of apps)
Click to expand...
Click to collapse
Thanks to you I have updated my phone to marshmallow using twrp 3.0.0, which allowed me to re-unlock bootloader, and root my phone.
It can be done, you just need to remove a few lines in the updater-script file.
something with ro.fingerprint (that identifies the recovery, it was originally expecting stock).
Replace it inside the zip. Then transfer update to sd card or internal.
After that wipe system, then reflash .43, right after that flash the mm update.
Will take some time but it should work once everything is verified.
reflash bl unlock and twrp (just a precaution) , then you can leave.
It would say no os but ignore it.
First boot takes around 10-15 mins then presto you finally have it.
Haven't encountered any bugs yet and it freed up a lot of storage space. Makes me wonder why I had to wait for the update to come to me, so glad I'm done with that.
So that concludes the last major update for the padfone s.....
Can u help me pls? I've tried unroot ,wipe system data and reflash .43 which is my current rom but still got signature verification error. any suggestion to fix this? Thx
Justatechie said:
Thanks to you I have updated my phone to marshmallow using twrp 3.0.0, which allowed me to re-unlock bootloader, and root my phone.
It can be done, you just need to remove a few lines in the updater-script file.
something with ro.fingerprint (that identifies the recovery, it was originally expecting stock).
Replace it inside the zip. Then transfer update to sd card or internal.
.
Click to expand...
Click to collapse
which lines exactly ? cause i tried removing mine and im now getting an error in the zip
error 6 or something
dtgo said:
which lines exactly ? cause i tried removing mine and im now getting an error in the zip
error 6 or something
Click to expand...
Click to collapse
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
NightbladeSinX said:
Can u help me pls? I've tried unroot ,wipe system data and reflash .43 which is my current rom but still got signature verification error. any suggestion to fix this? Thx
Click to expand...
Click to collapse
Thats odd.
You should probably Re-download or transfer the ww file again. Could just be a bad transfer of data.
Make sure you have twrp 3.0.0 and that system protection off. (it pops up on the first screen, but you can find it under twrp settings)
Justatechie said:
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
Click to expand...
Click to collapse
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
dtgo said:
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
Click to expand...
Click to collapse
If it doesn't say anything about identifying the device model or checking system, then something is wrong.
Might be a bad edit or it might have gotten corrupted while transferring back into the zip.
I stick with N++ for the edits, sometimes windows file transfer can be a pain by itself while trying to replace the update script, 7zip might help.
dtgo said:
thanks for the reply , i did that and got Error 6 but it just fails right there , no message or anything
Click to expand...
Click to collapse
got it working thanks again man you've been a big help
Justatechie said:
On Notepad++: (not sure about notepad, but you must get rid of ro.build.fingerprint lines and the abort command after)
Delete/Remove lines 7 through 9. If left alone or not deleted fully it will not accept the update because its looking at the recovery image.
It expects 5.0 stock recovery but it sees 6.0 twrp. (since it was built off the source of twrp 3.0.0 which is mainly compatable with 6.0+)
Thats about it.
Thats odd.
You should probably Re-download or transfer the ww file again. Could just be a bad transfer of data.
Make sure you have twrp 3.0.0 and that system protection off. (it pops up on the first screen, but you can find it under twrp settings)
Click to expand...
Click to collapse
Thx for reply. i manage to get updated to 6.0.1 but now i lost root. i did mistake not flashing twrp before 1st boot n it replace twrp to stock rec. Is there any root method available yet? I've tried latest kingroot but it was unsuccessful. Any way is there any difference between WW and TW firmware version?
NightbladeSinX said:
Thx for reply. i manage to get updated to 6.0.1 but now i lost root. i did mistake not flashing twrp before 1st boot n it replace twrp to stock rec. Is there any root method available yet? I've tried latest kingroot but it was unsuccessful. Any way is there any difference between WW and TW firmware version?
Click to expand...
Click to collapse
You could probably flash recovery through fastboot, only if your bootloader is unlocked. If not it wont allow the flash. it would say FAILED cant flash unsigned image, but theres a chance that it might have been flashed, just check to see if changes have applied.
Assuming that you have went to the fastboot portion of your phone you can check its status.
if its not unlocked, then you have to find another way to root to flash your twrp recovery back on your phone.
Did this, but kept getting errors due to (probably) my use of xposed. Managed to soft brick my phone, and recovered it using http://forum.xda-developers.com/padfone-x/help/guide-restoring-stock-rom-recovery-t3179818
After that, had to edit updater-script to remove all checks.
What tripped me up was just how long the update reboot took. Almost half an hour. I was going to give up but decided to leave it while taking a short nap.
heres the updater script for anyone having issues
Please can someone help me?
I'm trying so hard to get this to work but I'm barely getting anywhere. What I've done (thanks to ninekaw9's guide):
- unlock bootloader
- wiped everything (yet there is still stuff in the file explorer, like the su install folder)
- using fastboot boot recovery:
-- use TWRP 2.8.7.0 to transfer files from sdcard to emmc
-- with TWRP 2.7.1.1:
--- installed WW 99.99.99.0 for KK (works)
--- installed WW 12.2.2.27 for LP & stock recovery (works)
--- installed WW 12.2.2.43 for latest LP (works)
- removed every abort line from updater script to get it to stop complaining about fingerprint/unexpected system contents
- installed modified FOTA WW 13.6.5.30 for MM (no OS change)
So after all that, I'm where I started but with no apps.
Before I found out 2.8.7.0 couldn't flash stock ROMs I flashed 12.2.2.43 after a full wipe and ended up with no System UI...
Outcomes from using different recovery to flash MM update:
2.7.1.1 with unmodified: apparently my phone is TW not WW (incorrect)
2.8.7.0 with unmodified: some weird fingerprint with omni-T00N and 5.1.1, even after wipe and stock 12.2.2.43 flash. Couldn't edit or replace the default.prop file, it would just get overwritten each time
stock with unmodified: couldn't even mount my SD card, so tried ADB sideload, got the unexpected system contents message
stock with modified (no sha1): would no longer allow me to ADB sideload (0.00x message)
TWRP (either) with modified (no prop): unexpected system contents
TWRP (either) with modified (no prop/sha1): seems to work, but upon boot to system, nothing appears to have changed.
I desperately want MM so I have a smaller system partition, then I can stop pushing updates to system to save space, and therefore won't need root so I can play Pokemon GO and use Sky Q.
That or I'm going to try Magisk... Has anyone used this on a Padfone?
If anyone can guide me through which files/folders I can delete from my phone to save space, that would be great. I know most folders are mounting points, but there's a lot of .sh files and other folders that I'm not familiar with.
I've asked in another thread where I can get TWRP 3.x for Padfone S, but nobody has replied!
Please can someone help me?
Nintynuts said:
I'm trying so hard to get this to work but I'm barely getting anywhere. What I've done (thanks to ninekaw9's guide):
- unlock bootloader
- wiped everything (yet there is still stuff in the file explorer, like the su install folder)
- using fastboot boot recovery:
- use TWRP 2.8.7.0 to transfer files from sdcard to emmc
- with TWRP 2.7.1.1:
- installed WW 99.99.99.0 for KK (works)
- installed WW 12.2.2.27 for LP & stock recovery (works)
- installed WW 12.2.2.43 for latest LP (works)
- removed every abort line from updater script to get it to stop complaining about fingerprint/unexpected system contents
- installed modified FOTA WW 13.6.5.30 for MM (no OS change)
So after all that, I'm where I started but with no apps.
Before I found out 2.8.7.0 couldn't flash stock ROMs I flashed 12.2.2.43 after a full wipe and ended up with no SystemUI...
Outcomes from using different recovery to flash MM update:
2.7.1.1 with unmodified: apparently my phone is TW not WW (incorrect)
2.8.7.0 with unmodified: some weird fingerprint with omni-T00N and 5.1.1, even after wipe and stock 12.2.2.43 flash. Couldn't edit or replace the default.prop file, it would just get overwritten each time
stock with unmodified: couldn't even mount my SD card, so tried ADB sideload, got the unexpected system contents messagestock with modified (no sha1): would no longer allow me to ADB sideload (0.00x message)
TWRP (either) with modified (no prop): unexpected system contents
TWRP (either) with modified (no prop/sha1): seems to work, but upon boot to system, nothing appears to have changed.
I desperately want MM so I have a smaller system partition, then I can stop pushing updates to system to save space, and therefore won't need root so I can play Pokemon GO and use Sky Q.
That or I'm going to try hiding root Magisk...
If anyone can guide me through which files/folders I can delete from my phone to save space, that would be great. I know most folders are mounting points, but there's a lot of .sh files and other folders that I'm not familiar with.
I've asked in another thread where I can get TWRP 3.x for Padfone S, but nobody has replied!
Please can someone help me?
Click to expand...
Click to collapse
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
xantanion said:
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
Click to expand...
Click to collapse
Thanks. No wonder I couldn't find it as it doesn't mention 3.0.0.0 or 3.x or any version number at all.
I have answered my own Q&A thread with a link so hopefully others can find it. Will try it now.
xantanion said:
I used twrp 3.0. Worked like a charm what I ended up doing was reflashing the .43 and then the update after replacing the updater script file here is a link to the thread with the 3.0 twrp http://forum.xda-developers.com/padfone-x/general/padfone-xs-to-stock-lollipop-root-t3263664
Click to expand...
Click to collapse
Thankfully it has worked many thanks. Unfortunately while Sky Q no longer complains about root, it does complain about my Padfone station being an external display, so still won't play videos
Looking for some help.
I tried to update my old Samsung Galaxy S2 to Android 6.0.1 - while I did this successfully, I wasn't aware that I needed to increase the system partition size, so the GAPPs installation failed.
I thought that once the system partition size was increased, then I would be able to just go back and unzip the GAPPs file in recovery mode, but now when I enter recovery mode it's Cyanogenmod recovery which doesn't have an option to open zipped files from the SD card.
I have tried unzipping GAPPs via file manager on the phone, but it says that the file is too large.
I'm new to this, but feel that if I could just get back to the old TWRP recovery with the unzip option I could just wipe everything and reinstall everything from the mini SD card, but with no such option with the Cyanogenmod recovery I'm stumped as to what to do next.
Any thoughts on where to go from here would be very much appreciated.
Jimsin said:
Looking for some help.
I tried to update my old Samsung Galaxy S2 to Android 6.0.1 - while I did this successfully, I wasn't aware that I needed to increase the system partition size, so the GAPPs installation failed.
I thought that once the system partition size was increased, then I would be able to just go back and unzip the GAPPs file in recovery mode, but now when I enter recovery mode it's Cyanogenmod recovery which doesn't have an option to open zipped files from the SD card.
I have tried unzipping GAPPs via file manager on the phone, but it says that the file is too large.
I'm new to this, but feel that if I could just get back to the old TWRP recovery with the unzip option I could just wipe everything and reinstall everything from the mini SD card, but with no such option with the Cyanogenmod recovery I'm stumped as to what to do next.
Any thoughts on where to go from here would be very much appreciated.
Click to expand...
Click to collapse
2 important things when updating to cm13:
Increase Partitiones to 1 GB System and 4 GB data
before flashing.
Flash isorec twrp recovery 3.0.2-1 before or together with rom and gapps.
All files are zip-files to be flashed with recovery.
Do not unzip this Files.
Read noob friendly Guide by Saber "want to update to cm 13 .....
You will find everything you need there.
Sent from my ME173X using XDA-Developers mobile app
Many thanks for the reply - yeah, I realise now that I should have increased the system partition size BEFORE CM13, but sadly I didn't.
My issue is now that I have no idea how to change the recovery mode back to something like TWRP that will allow me to unzip files again - I tried simply flashing it with ODIN, but it failed & I'm still stuck with CM13
Jimsin said:
Many thanks for the reply - yeah, I realise now that I should have increased the system partition size BEFORE CM13, but sadly I didn't.
My issue is now that I have no idea how to change the recovery mode back to something like TWRP that will allow me to unzip files again - I tried simply flashing it with ODIN, but it failed & I'm still stuck with CM13
Click to expand...
Click to collapse
You have to flash a Recovery whith Odin.
So i would repit again to bei Sure its done properly.
- in Odin Flash pitfile 1gb System _4 gb Data
together with Gustavo Kernel KK with cwm Recovery.tar (Flash Recovery in PDA and do not forget to tick on repartition)
- in cwm Recovery Format: mounts and storage/Format sd0 (Internal SD)/select "default"/swipe
- then wipe Data, Cache, System
- Install cm 13 + gapps + isorec twrp recovery 3.0.2-1.zip in ONE GO (do not reboot in between !!)
- reboot system
Sent from my ME173X using XDA-Developers mobile app
Follow my complete tutorial to do so. Odin not needed.
https://forum.xda-developers.com/galaxy-s2/help/guide-tutorial-samsung-galaxy-s2-i9100-t3538601
I need rollback on My device huawei nova 2i [RNE-L22C636] from EMUI 8 to Emui 5
Since there's only two files [no have "update_data_public.zip" file]
http://update.hicloud.com:8180/TDS/d...ull/update.zip android 7.0 emui 5.1 firmware -RNE-L22C636B142CUSTC636D001
http://update.hicloud.com:8180/TDS/d...hw_spcseas.zip android 7.0 emui 5.1 firmware -RNE-L22C636B142CUSTC636D001
http://pro-teammt.ru/firmware-database/?firmware_model=RNE-L22C636B142&firmware_page=0
I need to make a correction."update-binary" on In HuRUpdater_0.3.zip
from this post [Comments on #59]
https://forum.xda-developers.com/ma...pment/hwota-huawei-mate10-lite-t3777115/page6
In HuRUpdater_0.3.zip, edit META-INF\com\google\android\update-binary
Remove "update_data_public.zip" commands
but it error "Updater process ended with ERROR: 255"
I do not know where to delete the command.
Tell me how to delete the correct command.
OK, apparently.
you need huawei to give you a stock firmware of three files, but in your version you only have two files.
Chisetdel31260 said:
OK, apparently.
you need huawei to give you a stock firmware of three files, but in your version you only have two files.
Click to expand...
Click to collapse
Some people do it.
from this post [Comments on #59]
https://forum.xda-developers.com/ma...pment/hwota-huawei-mate10-lite-t3777115/page6
This video uses 2 files. [How to Downgrade Huawei P10 From Oreo 8.0 to Nougat 7.0]
https://www.youtube.com/watch?v=WYSVq1TE2kI
surathus said:
Some people do it.
from this post [Comments on #59]
https://forum.xda-developers.com/ma...pment/hwota-huawei-mate10-lite-t3777115/page6
This video uses 2 files. [How to Downgrade Huawei P10 From Oreo 8.0 to Nougat 7.0]
https://www.youtube.com/watch?v=WYSVq1TE2kI
Click to expand...
Click to collapse
I wonder. SI, error 255 and encryption.
can you test that.
twrp, wipe, data format, yes,
twrp, wipe check data, change f2f.
now, install hurupdater 0.3
tested
Chisetdel31260 said:
I wonder. SI, error 255 and encryption.
can you test that.
twrp, wipe, data format, yes,
twrp, wipe check data, change f2f.
now, install hurupdater 0.3
tested
Click to expand...
Click to collapse
All the steps I have been told do not test.
I think I may have deleted the command incorrectly, so I have a problem.
I think you probably know how to delete the command.
If the command was "update_data_public.zip" deleted correctly. May be completed.
I tested as told
twrp, wipe, data format, yes,
twrp, wipe check data, change f2f.
now, install hurupdater 0.3
It error same
Can someone help me?
surathus said:
Can someone help me?
Click to expand...
Click to collapse
Paste log from after you try to flash.
There is a button in advanced named Copy Log which will copy it to sdcard.
The error suggest something else is broken, as it doesn't even start the script.
It could be encryption.
If you Format Data, reboot recovery after, then try to flash it again.
Edit: also, you formatted System as f2fs too in your screenshot. System is ext4.
ante0 said:
Paste log from after you try to flash.
There is a button in advanced named Copy Log which will copy it to sdcard.
The error suggest something else is broken, as it doesn't even start the script.
It could be encryption.
If you Format Data, reboot recovery after, then try to flash it again.
Edit: also, you formatted System as f2fs too in your screenshot. System is ext4.
Click to expand...
Click to collapse
Thank you
GSI ROM: PixelExperience-10.0-20200328-GSI-ARM64-AB. Take it at Your Own Risk!
It works on Android 9 and 10 stock rom
INSTALLATION :
Enter TWRP Recovery
Select Wipe - Format Data - type "yes" and confirm
Select Reboot - Power off and Enter TWRP again
Copy GSI ROM and GAPPS to your phone
Install - Install Image - select PixelExperience-10.0-20200328-GSI-ARM64-AB.img - select System Image and Confirm to flash.
Select Reboot - Power off and Enter TWRP again
Select Wipe - Advanced Wipe - select "System" - Repair or Change File System - Resize File System - Confirm to Resize
Select Mount - select "System" & "Vendor"
Select Install - select open_gapps-arm64-10.0-nano-20200408.zip and Confirm Flash
Reboot - Recovery
Setup the phone - Done!
DOWNLOAD:
GSI ROM PixelExperience-10.0-20200328-GSI-ARM64-AB.img.xz
Open GAPPS open_gapps-arm64-10.0-nano-20200408.zip
ISSUE:
MTP does not work
other by your self
Credits
Thanks to ExpressLukeGSI
Watch this video how to flash it:
help pla i am a gamer and want to play pubg smooth plz help
can u please share the backup file of twrp of this rom
when i flashed and reboot ita says no os installed and
cant repair or resize the partion error 9 showed in twrp pls help i am a gamer and want smooth game play plz plzzzz
coolro121 said:
can u please share the backup file of twrp of this rom
when i flashed and reboot ita says no os installed and
cant repair or resize the partion error 9 showed in twrp pls help i am a gamer and want smooth game play plz plzzzz
Click to expand...
Click to collapse
I don't backup it, just follow the instructions correctly, don't miss a step and It should work, make sure you download ARM64-AB. On resize partition you must select system.
tried with these all gsi roms same error on all
i did all the things according to the video bro but
same error on resize and repair partion
twrp 8 error and no os installed can u tell me which firmware u flashed exactly name plz
coolro121 said:
i did all the things according to the video bro but
same error on resize and repair partion
twrp 8 error and no os installed can u tell me which firmware u flashed exactly name plz
Click to expand...
Click to collapse
I think I know what happened with you. After download the ROM PixelExperience-10.0-20200328-GSI-ARM64-AB.img.xz, you must extract it and you will get PixelExperience-10.0-20200328-GSI-ARM64-AB.img. You can extract it using winrar or 7-zip
hmm
i rename the pixel file to zip i should extract it okay i will try
How we can fix issue with mtp because mtp is important to connect phone with computer.and I use USB tethering often
Volte issue no call going
In pixel rom volte issue unable to call plz help
coolro121 said:
In pixel rom volte issue unable to call plz help
Click to expand...
Click to collapse
volte, mtp are does not work...
Thanks for the effort , but could magisk and xposed work well on this ROM ?
lfk0000 said:
Thanks for the effort , but could magisk and xposed work well on this ROM ?
Click to expand...
Click to collapse
Yes, it work
Device automatically restarts
Flashed custom ROM, as show in the video but after setting the account, device automatically restarts at particular time intervals unexpectedly. How do i fix it?