Helo friends, I am new to redmi note 3 (sd). I officially unlocked the boot loader. I updated my device to 7.3.2 using miflash. I tried to install TWRP. I flashed the TWRP img and modified img. I tried to enter TWRP by pressing vol+ & power button. BUT no recovery was found . Simply Phone with cable image is showing in display. I followed all the steps carefully. I tried Cofface version and also the latest one.
Somebody please guide me step by step procedure to install TWRP. Somebody have the proper modified image for 7.3.2??? If yes means please give me the link.
In 7.1.8 i was able to get the TWRP. Is there any way to update to miui 7.3.2 by TWRP from 7.1.8
MIUI overwrites your recovery, disable it with the ALKA recovery, which can be found in Santosh's thread.
Here is what I did, to make TWRP workable, and it's very easy, no pc needed.
1. Install flashify
2. Install twrp with flashify but do not reboot yet
3. copy alka twrp to your phone
4. when it's done reboot your phone in flashify (right corner, reboot to recovery)
5. make system r/w (you will lose ota but screw it..., no other way to make twrp permanent on the phone)
6. flash alka update
7. reboot in twrp -> system
8. TWRP will give you a pop-up which tells you that you would like to disable the stock recovery, and just simply allow it to do it.
9. boom, done
Thanks bro!!!!!!!
Now i got both root and recovery on 7.3.2
balazs312 said:
MIUI overwrites your recovery, disable it with the ALKA recovery, which can be found in Santosh's thread.
Here is what I did, to make TWRP workable, and it's very easy, no pc needed.
1. Install flashify
2. Install twrp with flashify but do not reboot yet
3. copy alka twrp to your phone
4. when it's done reboot your phone in flashify (right corner, reboot to recovery)
5. make system r/w (you will lose ota but screw it..., no other way to make twrp permanent on the phone)
6. flash alka update
7. reboot in twrp -> system
8. TWRP will give you a pop-up which tells you that you would like to disable the stock recovery, and just simply allow it to do it.
9. boom, done
Click to expand...
Click to collapse
as for me the app freezes when I try to install twrp leaving me with a recovery-less phone help!
pandyajoe said:
Helo friends, I am new to redmi note 3 (sd). I officially unlocked the boot loader. I updated my device to 7.3.2 using miflash. I tried to install TWRP. I flashed the TWRP img and modified img. I tried to enter TWRP by pressing vol+ & power button. BUT no recovery was found . Simply Phone with cable image is showing in display. I followed all the steps carefully. I tried Cofface version and also the latest one.
Somebody please guide me step by step procedure to install TWRP. Somebody have the proper modified image for 7.3.2??? If yes means please give me the link.
In 7.1.8 i was able to get the TWRP. Is there any way to update to miui 7.3.2 by TWRP from 7.1.8
Click to expand...
Click to collapse
Tried to used this the latest from miui forum, redmi note 3 pro Snapdragon version: http://en.miui.com/thread-296053-1-1.html
Sent from my Redmi Note 3 using XDA-Developers mobile app
Related
Hello Everyone,
Is it possible to install SuperSU on my Redmi Note 3 without TWRP? I am currently on latest version of China Dev with officially unlocked bootloader.
I am okay with temporary flash of TWRP, but want to be stock recovery, after installing SuperSU.
Is it possible at all? If yes, can someone please guide me with the process.
You need to have a unlocked bootloader - either officially or unofficially (search the forums for the methods)
copy the latest supersu.zip to your memory card/internal memory
reboot to fastboot by holding the volume up and power button
set up adb on your computer
copy the cofface twrp for redmi note 3 into your adb folder on the computer ( do not use the official twrp, cos you need a modified boot.img for it to work)
then type "fastboot boot cofface.img" (replace cooface.img with the file name of your recovery)
your will boot into a temporary twrp
install the supersu.zip and reboot
Voila!
Thanks...I already did that before your response and it looks to be working fine...thanks again
in every forum ,about rooting rn3 pro i got only that i have to flash cracked boot.img or ubp zip after flashing supersu.zip.are they outdated.cant we do direct flash supersu zip directly using alka/cofface recovery or i have to use diseable verify option in recovery advanced menu.very messy please help me
Camlin3 said:
in every forum ,about rooting rn3 pro i got only that i have to flash cracked boot.img or ubp zip after flashing supersu.zip.are they outdated.cant we do direct flash supersu zip directly using alka/cofface recovery or i have to use diseable verify option in recovery advanced menu.very messy please help me
Click to expand...
Click to collapse
Simple steps:
1. Go in fastboot mode.
2. Flash official twrp.
3. Boot in recovery.
4. Flash supersu zip.
5. Reboot your phone.
And yeah, allow modification to system partition when asked in recovery. The only downside of the official recovery is that it will be replaced by the stock recovery on boot. No prob, you can flash it again. No need to flash custom cooked boot image or something.
To keep recovery forever:
In system partition, there will be a file next to build.prop, named something like recovery-boot-bak or something, delete it and then flash twrp and this time it will stay.
Archit9169 said:
Simple steps:
1. Go in fastboot mode.
2. Flash official twrp.
3. Boot in recovery.
4. Flash supersu zip.
5. Reboot your phone.
And yeah, allow modification to system partition when asked in recovery. The only downside of the official recovery is that it will be replaced by the stock recovery on boot. No prob, you can flash it again. No need to flash custom cooked boot image or something.
To keep recovery forever:
In system partition, there will be a file next to build.prop, named something like recovery-boot-bak or something, delete it and then flash twrp and this time it will stay.
Click to expand...
Click to collapse
After flashing for ex. Resurrection Remix (or any other custom rom) the device asks whether it should leave an old recovery or not. Flashing official miui zip doesn't touch the recovery at all.
So it's not necessary to delete any files (regarding my experience).
Sent from Note 3, Xiaomi Redmi Note 3.
I tried to flash twrp recovery image but i can't boot to recovery
Also tried philz... make the phone freeze on boot
Please anyone help me !!
Thanks in advance ?
anyone????
anything guyzz????
here is twrp
Sh3R3iF said:
I tried to flash twrp recovery image but i can't boot to recovery
Also tried philz... make the phone freeze on boot
Please anyone help me !!
Thanks in advance ?
Click to expand...
Click to collapse
i got this same issue i like you.
i succeed in doing it with fastboot cmd commands
make sure to backup phone because i lost every thing after flashing recovery.
but it works well
Root Infinix Zero 4 Plus
all you need to root infinix z4 + nougat is
1. firmware marshmallow
2. SP flashtool
3. USB driver
4. twrp
5. supersu
6. firmware nougat
Link firmware
step of installation
1. make sure the driver is installed on your computer
2. flash your device with sp flashtool using marshmallow firmware
3. after flashing, turn on your device as usual and put supersu , twrp and firmware nougat on memory then turn off the device
4. flash your recovery to twrp with sp flashtool
5. then go to recovery mode with use combination button (vol-up + power)
6. install zip supersu then reboot system (your system was rooted on marshmallow firmware)
7. flash your recovery.img with default marshmallow recovery with sp flashtool (juct check recovery.img) then rebot system
7. after that the system updates to Nougat by means of local updates
8. flash recovery again to twrp recovery, reboot to twrp recovery then flash super su again
9. finish. You have rooted z4 + nougat,, sorry bad english:silly:
Info
Thank you for the info guys.
Hello everyone,
I have a redmi note 4X with MTK soc
The bootloader is unlocked.
I want to flash TWRP recovery. I use adb, the "nickel " TWRP, and message in the cmd window was "ok"
but when i reboot, whatever the way (buttons or adb reboot), it still reboot on the stock recovery.
I've tryed many times, even with a "moly" TWRP (with my MI 4S, the "aqua" didn't work and I had to flash the "libra" one and it was all effective)
Tryed to re install adb, etc. Wathever, it's always "ok" in adb but still reboot on the stock recovery.
Can't try with flashtool or that kind of (Mitool Flash atc) because I can't find the right "scatter" files....
Does anyone have a clue? what is blocking?
Thanks for help
You must reboot back to recovery, not to system, after installing TWRP.
1. Install TWRP
2. Reboot to Recovery (not to system) - this means you will see TWRP screen again
3. Now you can reboot to System
This is only done for the first time installing TWRP. Next time, TWRP will always be there.
Hello,
Well please I need new help !!
Now I'm fighting a new issu !! Now that I at last managed to flash TWRP, and enter in this custom recovery, my phone don't boot system anymore !! stay stuck on the MI logo (
Do I need to flash the boot.img ? But why the hell would a recovery flashing would have change the boot partition??
And if so, where please could I find the boot.img for MIUI 10.1 stable?
Hello,
For those who have the same issu.
I've flashed a boot.img file found in unzipped miui rom zip.
- download from xiaomi.eu the right rom
- unzip
- find the boot.img file
- flash it with adb / fastboot
Well, So now I have my phone and datas back, and can boot on a custom recovery; but TWRP don't work well. Doesn"t keep the settings, can't install anything (it doesn't find any file when exploring ) and can't wipe cache (as if it can't read partition). That's all I tryed by now, I despair a little and that's a lot of time for an easy thing (was very easy on other phones)
Well, this time I'm flooded, i' ll take somme time but don't give up trying to root that phone
Start again, and I recommend ZCX-TWRP-3.0.2-X-REDMI_NOTE4-MTK_Nikel-16.11.18.img and Magisk instead of SuperSU
https://xiaomifirmware.com/downloads/twrp-custom-recovery-redmi-note-4-mtk/
Hi,
I was running:
Unlocked, TRWP and magisk on most actual version, beryllium-9.5.6-9.0-vendor-firmware, lineage-16.0-20190506-nightly-beryllium-signed
Today I started an OTA Lineage Update, but my Poco is now stuck in fastboot mode!
When I start minaml adb and type "fastboot continue", Lineage OS will boot normally. The TRWP-App Icon disappeared, but I can still start the TRWP-App via Google Play.
I copied all zips necessary for a clean new install onto my SD-Card, but I cannot boot into TRWP Recovery any more!
I downloaded the All in one tool, it connects: ADB device Ready. But I just don't know what to do for a clean new install.
Please help a newbie, I don't want to brick my Poco any further. I found a few threads that OTA Updates do not work that reliable, but I haven't figured out a solution.
Best regards
If I understand correctly, the Lineage OTA Update wiped the recovery Partition with TRWP?
That would explain why I cannot boot anymore to recovery.
As I remember I have been using OTA Updates in the past working fine. How should I update Lineage in the future? Always clean install? And how to backup all my data then, nandroid?
Should I now use the All in one tool to Flash TRWP again to recovery? How? Use "Recovery Flasher and Root" -> TRWP and check "Root after flash"?
Andi900rr said:
If I understand correctly, the Lineage OTA Update wiped the recovery Partition with TRWP?
That would explain why I cannot boot anymore to recovery.
As I remember I have been using OTA Updates in the past working fine. How should I update Lineage in the future? Always clean install? And how to backup all my data then, nandroid?
Should I now use the All in one tool to Flash TRWP again to recovery? How? Use "Recovery Flasher and Root" -> TRWP and check "Root after flash"?
Click to expand...
Click to collapse
Get the TWRP recovery image on to your pc, together with vendor/firmware zip for at least 2019-05-23. fastboot boot [TWRP recovery img] to boot the recovery, copy the vendor/firmware file over with adb, flash it with TWRP and reboot. If all goes well, great. If it doesn't, well...
Hi, I am unsure what you refer to by "TWRP recovery image", do you refer to "twrp-3.3.0-0-beryllium.img" or to some kind of backup image?
I have the "beryllium-9.5.23-9.0-vendor-firmware.img" on both, sd-card and PC now. I just do not know how to flash TWRP with the All in one tool, either by
Recovery -> Recovery Flasher and Root -> select recovery -> twrp-3.3.0-0-beryllium.img [and check the box "Root after Flash"]
or
Miscellaneous -> Advanced Options -> fastboot flash recovery twrp-3.3.0-0-beryllium.img
I just guess the first Option (Recovery)
Andi900rr said:
Hi, I am unsure what you refer to by "TWRP recovery image", do you refer to "twrp-3.3.0-0-beryllium.img" or to some kind of backup image?
I have the "beryllium-9.5.23-9.0-vendor-firmware.img" on both, sd-card and PC now. I just do not know how to flash TWRP with the All in one tool, either by
Recovery -> Recovery Flasher and Root -> select recovery -> twrp-3.3.0-0-beryllium.img [and check the box "Root after Flash"]
or
Miscellaneous -> Advanced Options -> fastboot flash recovery twrp-3.3.0-0-beryllium.img
I just guess the first Option (Recovery)
Click to expand...
Click to collapse
twrp-3.3.0-0-beryllium.img is what I was referring to. Boot it with the command I gave. The vendor-firmware is a zip file, not an img file. You need to flash that after booting TWRP.
Sent from my POCO F1 using XDA Labs
yes, vendor is of course zip not img.
Thank you for helping me!
I was using the all in one tool to Flash TWRP again with the Checkbox "root" activated, booted recovery and went though a whole new clean install, device is running fine again.
I am Kind of afraid to touch the OTA update Option ever again. Seems that when updating via OTA, one Need to still checkout compatibility of all other zips and TWRP Version etc.
So the effort is the same to do a clean install with all updated.