Hi guys,
I'm new on the forum but I follow you for a long time.
So, my purpose is writing a detailed and simply to read guide to Root and install Xposed on tablet Asus TF103C under Lollipop 5.0 update.
I've tested the following procedure and it works for me.
ROOT
1) enable USB debug in developer options
2) download "ZenFoneRootKit_20150528.zip" and extract it
Download link: ZenFoneRootKit_20150528.zip or just google it
3) with tablet turned on, run Root.bat in the folder
4) the device will reboot in fastboot and root automatically, it may take few minutes
XPOSED
1) Download "xposed-v85-sdk21-x86.zip", "xposed-uninstaller-20150831-x86.zip"*, "XposedInstaller_3.0_alpha4.apk" in INTERNAL memory of tablet.
Download links:
FRAMEWORK
UNISTALLER
APK(source: XDA forum)
2) Download "Temporary TWRP.zip" (temporary recovery) and extract it in C:/ on PC
Download link: Temporary TWRP
(source: 4pda.ru forum)
3) Enter in fastboot (press DOWN button+POWER untill Asus logo appears, then keep pressing only DOWN button)
4) Run "Launcher.bat" located in Temporary TWRP folder (extracted previously)
5) Temporary TWRP recovery will start on device:
Allow modifications when asked you
Enter in "Install" section >
Explore manager, find the folder where is xposed-v85-sdk21-x86.zip > select and flash it
reboot system
6) After optimizing apps, install Xposed apk ("XposedInstaller_3.0_alpha4")
*in case of bootloop, repeat procedure flashing "xposed unistaller" instead
I hope this could be useful.
List of stable Xposed modules
Here below a little list of Xposed modules that work for me on Asus TF103C under Lollipop update:
BootManager
EnhancedToast
GravityBox [LP]
Greenify
Lucky Patcher
MinMinGuard
Native Clipboard
NotifyClean
Youtube Background Playback
Network Speed Indicator
Working like a charm :victory:
Thanks again!!! :highfive:
prosquos said:
2) download "ZenFoneRootKit_20150528.zip" and extract it
Download link: ZenFoneRootKit_20150528.zip or just google it
I hope this could be useful.
Click to expand...
Click to collapse
This link requires a decryption key. ....
Edit: Google the file name and the first result is a GDocs link that worked for me.
Sorry for the incovenience, I've just updated Mega link, now it doesn't require the decription key.
So, i did all the steps to root it, but in fastboot it only shows "FASTBOOT CMD WAITING...", and if i connect it and THEN open Boot.bat, it shows "no valid installer medium found site".
Any suggestions? I need to get the junkware out of it, and optimize it a bit :C
Ah, and in the CMD i get this:
'
' Rooting, please be patient ..
'
'
< waiting for device >
Click to expand...
Click to collapse
Also adb devices shows nothing.
worked loading into clockwork once now it just says to many lines on pc cmd then loads up with a black screen nothing happens just hangs
Hello.
I know that is an old thread. I got this tablet that has this unresponsive screen problem. I wanted to try flashing a custom lollipop to see if the problem persist. Tryed everything i found on the web. Nothing worked. Did anyone managed to upgrade it?
Tnx for all replies.
Related
Has anyone figured out how to root sony walkman f880 series?
I am very interested in this as well.
garyHal said:
I am very interested in this as well.
Click to expand...
Click to collapse
Likewise. I've posted here with my request to help if someone is down on this project:
http://forum.xda-developers.com/showthread.php?t=1981328&page=10#post58470882
Just thought I would share that the F880 series and possibly the ZX1 can still be rooted. I came across a Japanese YouTube video showing the root process for an F886 with 1.24.0000 firmware. It involves using the KingRoot software and installing SuperSU instead of the KingRoot app. I tried it myself on my F887 and can confirm it works! Since I couldn't read Japanese, I just followed along with the video and used the links in the description.
Link to video:
http://www.youtube.com/watch?v=N_F4Ef7fBo0
You might want to enable usb debugging after enabling developer options (I'm not sure you really need to do this, but it couldn't hurt) http://www.greenbot.com/article/2457...or-tablet.html
Steps I've deciphered from watching the video:
1) Download and install the KingRoot software for Windows from http://www.kingroot.net (the software is completely in Chinese language unfortunately)
2) Start up the KingRoot software (if it hasn't already started up already) and plug in your F880 series walkman. It should be detecting your device and downloading root exploits for it.
3) When it's done finding the root exploit for your device, click on the green Root button and it should start rooting your device. (the device should restart a couple of times)
4) Rooting should be finished when the program shows a big green check mark and KingRoot app launches on the device.
5) Close the KingRoot app since we'll be installing SuperSU instead.
6) Go to: http://www.w0lfdroid.com/2015/05/How...perSU.html?m=1 and download Replace_Kingroot_With_SuperSU.zip at the bottom of the page.
7) Extract Replace_Kingroot_With_SuperSU.zip and there should be a folder named "mrw". Move the "mrw" folder to the root directory of the device. You can disconnect the device from the computer after the "mrw" folder is done copying and close the KingRoot program on the computer.
8) Open up the Google Play store and download/install "Terminal Emulator for Android".
9) Start up Terminal Emulator and type the following:
su
(hit enter and press "allow" when the pop up appears)
sh /sdcard/mrw/root.sh
(hit enter, the script should run and there should be a whole lot of failures, it should also crash)
10) Press OK, and SuperSU should start up. Press "Normal" and SuperSU should start to install. Press OK again the next 2 times when the pop up appears.
Congratulations! Your F880 should now be rooted! Now you can install awesome stuff like Viper4Android, Xposed, and a bunch of battery saving apps such as Greenify and Amplify.
Finally ported TWRP to the Medion Lifetab P10505 with working touch.
No guarantees are given, if you damage your tablet, all you do is on your own risk. I have the original ROM from Medion, if you need a full restore.
Please note that the TWRP recovery was not much tested and may be buggy. I didn't test with encryption or the restore process.
Please follow these steps:
1. Download all the files from Mega:
https://mega.nz/#F!pvQCQCxL!dfCHhGkliNSj-Wd3NcRV2ghttp://
2. Unpack all files into the same directory
3. If not done already, install the Intel Driver Package and reboot your PC
4. Unpack the ADB Tools into the directory
5. On your tablet go to your settings and enable USB debugging in the developer options. If you don't see the developer options menu under settings, goto about tablet and tip the build number seven times fast which will reveal the Developer options in the Settings.
6. Copy the file UPDATE-SuperSU.zip to your tablet (via USB or to memory card)
7. Switch off your tablet
8. Press and keep pressed the On/Off button and Volume Down button until you see the bootloader menu. Please press the buttons at the same time.
9. Now connect the table via USB cable to the PC.
10. Open a command window on your PC and change to the above created directory .
11. type the command: fastboot oem unlock (you can lock it again after the whole process if you want)
If this doesn't work goto the below section: Install recovery through flash
12. next type: fastboot flash recovery final_P10505_working_TWRP_3.0.2.0.img
13. Use the volume up or down button until Recovery mode is displayed.
14. Press the On/Off button shortly to start the new TWRP recovery menu. Please be patient until it fully loads. May take a couple of minutes.
15. Now choose install from the menu.
16. Proceed to the folder where you store the UPDATE-SuperSU.zip and select the file and swipe to install.
Note: If you forgot to copy the file to the tablet you can use the windows explorer to copy it to your tablet. There is a new device called Vi10 plus
(as mentioned it is only a port not build from source)
17. The Zip file should install
18. Use the back button to go back to the main menu of the recovery and select reboot and then system.
19. Now you have rooted the device and can create backups in the TWRP recovery.
20. To verify use any root checker tool from play store.
21. Feel free to hit the Thanks button
Install recovery through flash:
If there are any errors you can download the original ROM from Medion.de. You need then the Intel Platform Flash Tool Lite to install the ROM from Scratch (all your data will be lost).
When you run the flash tool, open the file from Medion.de and it will unpack the zip-file in the folder C:\Users\Your account name\.flasher\.download\p1050x-6.0-factory-v2.3
Proceed to the folder Just rename the file final_P10505_working_TWRP_3.0.2.0.img to recovery.img and replace the original file from Medion. Then hit the flash button.
Actually the Intel tool will perform the same command as above.
PS: I read that P10506 is hardware like the same as P10505, so it may work there as well, but no guarantees.
PPS: Credit go to the creators of the TWRP file for the Chuwi Vi10 plus (Highbook), which I don't know their names.
thank you for this, I used it on my P10506, the only difference was thead the command in section 12 has changed to:
fastboot flashing unlock
Cooool!
Did everything on my P10506.
Now waiting untill booting is finished...... CHECK!!
Testing with a root checker........ CHECK!!
That is great!
Thank you!
simplex3 said:
Did everything on my P10506.
Now waiting untill booting is finished...... CHECK!!
Testing with a root checker........ CHECK!!
That is great!
Thank you!
Click to expand...
Click to collapse
You're welcome,
but surely room for optimization of this tablet. On mine it happens after quite some that it becomes very laggy.
Hope yours is running better.
Bernie_W said:
You're welcome,
but surely room for optimization of this tablet. On mine it happens after quite some that it becomes very laggy.
Hope yours is running better.
Click to expand...
Click to collapse
Seems to work fine.
No lags. Okay, not more laggy then it was before rooting.
But now i'd like to flash a custom rom... Any suggestions?
Regards.
simplex3 said:
Seems to work fine.
No lags. Okay, not more laggy then it was before rooting.
But now i'd like to flash a custom rom... Any suggestions?
Regards.
Click to expand...
Click to collapse
I haven't seen any custom roms for this tablet, but I actually didn't look much. The problem is that it is nearly impossible without sources to create one.
any new mirrors available? mega zip file offline...
P10506
Thanks for the wonderful news! If anyone (Bernie?) could make the files / TWRP image available again, they'd make me and the previous poster even happier
Looking to root and TWRP my familys two P10506s - one still on 5.1 - should I update it to 7.1.1 (last available image from Medion) first?
Download Link
Somebody here who have the files available and can upload it again?
Would be great.
Thanks
Bye
Amy New version for P10506? My tablet Constantly crasing on original software
Asciola said:
P10506
Thanks for the wonderful news! If anyone (Bernie?) could make the files / TWRP image available again, they'd make me and the previous poster even happier
Looking to root and TWRP my familys two P10506s - one still on 5.1 - should I update it to 7.1.1 (last available image from Medion) first?
Click to expand...
Click to collapse
Maybe you can flash android x86.
1,Flash tw08a-87z8 bios using flashrom in ubuntu.
2,Push esc key to enter bios.
3,Install android ,linux or windows using usb/sd boot.
Some medion and onkyo tablets are compatible.
I have written more details on my wiki.
TA2C-74Z8 - SmileTabLabo
Onkyo TA2C-74Z8はODS株式会社製造のAndroidタブレット。スペック 型番 TA2C-74Z8 製造元 オーディーエス株式会社 CPU Intel Atom Z8350 G...
wiki3.jp
Hi
I wonder if someone can help me please.
I bought a phone off ebay: Sony Xperia Z3 (D6653). It looks almost brand new with stickers on both the front and back. All the accessories are sealed also.
Howver, it came with a european plug (2-pin). When turned on there is no google services, no google apps, play store.
Everything looks fine apart from no google stuff. It has the old Android 4.4.4 installed.
When I check for update OTA then it says the device already has the latest software on (cannot be true).
I tried to repair the phone via PC through Xperia Companion but it appears that it found a later software as it downloads it (takes a while), but when it enters the preparation stage it comes up with an error message and stops.
The build number is 23.0.A.2.93
Any help will be greatly appreciated.
Thanks
You eaither should 1. Do a factory reset 2. If that does not work attempt to root the device and then get twrp for your device and then download the open gapps zip file from their official website. (Before installing twrp you should backup your current recovery if you device has one which is all on the official app which you currently can't get on google play but you can use adb for that. Just download the apk file onto your computer and first use cd downloads. (if you download folder is C:/Users/[insert your user here]/Downloads/) (if your starting directiory is anything other than C:/Users/[insert your user here] just use cd C:/Users/[insert your user here]/Downloads/) (if your downloads folder is something different just use cd [insert download location here]) After that you will need to use adb install [insert apk name here] (Tip: Put in a couple of the letters of the apk name and then press tab until you find it) Also you will need to install adb tools for this if you didn't already know you can eaither search for the forum on xda with the .exe file which only installs he adb commands and adb drivers (and maybe even fastboot commands and drivers if you find the one with both) or just get Android SDK which comes with the adb commands. After that finishes just tap on flash recovery. Then it should pop up with a menu asking what device you use. Choose your device. If it does not list your device that means the team hasn't officially released the recovery for your device yet, but on the xda forum for your device you might be able to find someone who made it themselves unofficially for the device. All you will need to do is use adb tools to install a app called Flashify and you will need to transfer the recovery image to the root of your internal storage or where ever you want to put the file. After that just open Flashify and find the setting flash system image then press recovery image. When that is done locate your file via file manager and then tap on it then Flashify will flash the custom twrp recovery. You will also need to transfer the open gapps .zip file yo your internal storage. When you flash your twrp (eaither through the official app or Flashify) reboot your phone. As soon as it shows the boot screen press and hold the button you would usually press to access recovery mode. (If it does not work or you do not know how just use adb again. When your phone boots to the lock screen use adb reboot recovery and then it should reboot and automatically go into the twrp recovery) After that wait for twrp to load, when that happens go to install and locate the open gapps zip file and press it. A message should appear asking if you want to add more zips, just swipe where it says to swipe and then press reboot device. And now you should have Google apps! Also for open gapps make sure you choose the right one according to your version of android. Since you are using android 4.4.4 select the Android 4.4.4 version of open gapps.
Maybe helpful to have some basic information about this great device in one posting:
Device Specs
https://www.mobosdata.com/phone/hisense-a5/
How to reflash Firmware directly from microSD (Tfmode)
Thanks to Anghirrim !!!
https://forum.xda-developers.com/showpost.php?p=82575517&postcount=21
Edl mode (in General)
Thanks to Anghirrim !!!
https://forum.xda-developers.com/showpost.php?p=82654769&postcount=79
Rooting for Firmware Version 6.09.06.00
Thanks to joygram !!!
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
QFIL Firmware 6.03.02 for unbricking in Edl-Mode
Thanks to gowin132 !!!
https://drive.google.com/file/d/1LqcR6NVlSqL6gT6y1y1x9r58_LAKBBjd/view?usp=sharing
QFIL Firmware 6.09.06 for flashing in Edl-Mode
Thanks to gowin132 !!!
https://forum.xda-developers.com/showpost.php?p=82727173&postcount=8
Rom Download Links for flashing in TF-Mode (microSD)
6.09.06.00 Thanks to giuseppemag !!!
https://forum.xda-developers.com/showpost.php?p=82583733&postcount=28
https://drive.google.com/open?id=1JBzsFrtGtIXLYTPTMA2cc9spp_dxF_WX
Debloating help and blocking IP (Updated)
https://forum.xda-developers.com/showpost.php?p=82795057&postcount=4
Do you have an unlocked Bootloader? ( Hisense always locked!)
https://forum.xda-developers.com/showpost.php?p=82634399&postcount=117
How to enter hardware Edl mode
Thanks to joygram !!!
https://forum.xda-developers.com/android/general/hisense-a5-how-to-enter-hardware-edl-t4103929
There are a lot reviews about the device and a thread at MobileRead.
Unbricking in Detail
Unbricking the Device in Detail
Before you step forward I would recommend taking out the Sim-Card
stay offline until the device is debloated
Some general information:
Bricked, but you have an unlocked Boolader
just flash Image in fastboot or if available in twrp
*** All bootloaders of Hisense devices are locked and there's no way to unlock !!! ***
Bricked & you haven't got an unlocked Boolader
TF-Mode (microSD)
https://forum.xda-developers.com/showpost.php?p=82575517&postcount=21
download latest TF-Firmware i.e.
https://forum.xda-developers.com/showpost.php?p=82583733&postcount=28
how to enter TF Mode?
https://forum.xda-developers.com/showpost.php?p=82650955&postcount=72
shutdown the device
press both volume buttons and then power button together
release power button and wait 10s until the update screen comes up
alternative1
shutdown device
holding volume +- and power buttons together
alternative2
shutdown while holding volume +-
press+- buttons and then power button
release power button but holding +-
wait 10sec
release +- buttons
Hisense powered by Android
wait 10sec
press power button just short
If this above won't work, then the bootloader is damaged you will need to flash the Firmware in Edl-Mode with Qfil. This always works if not hardbricked!!! So relax
General Info about EDL Mode (You need to get a Qfil-Firmaware-Image)
https://forum.xda-developers.com/showpost.php?p=82654769&postcount=79
https://forum.hovatek.com/thread-21791.html
Files needed:
Edl-Mode Firmware files 6.03.02 for unbricking
https://drive.google.com/file/d/1LqcR6NVlSqL6gT6y1y1x9r58_LAKBBjd/view?usp=sharing
prog_emmc_firehose_8937_ddr_000bf0e1.mbn from joygram Root-package
attachement inside "RootKit R03"
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
Qualcomm drivers i.e. 64bit for Windows 10
i.e.
https://www.getdroidtips.com/download-qualcomm-qdloader-hs-usb-driver/
actual Qpst software incl. Qfil
https://www.qpstflash.com/
Before installing drivers please read this
Obey these steps before installing unsigned drivers and prevent Sahara errors
https://forum.xda-developers.com/showpost.php?p=77229641
Installing Instructions details for drivers
https://forum.hovatek.com/thread-16965.html
Installing Qpst instructions details
https://forum.hovatek.com/thread-31475.html
Start Qfil from the startmenu (inside "Qpst")
check the setup Qfil before entering edl-mode
steps 1-4. from instructions here
https://forum.hovatek.com/thread-31475.html
-> then go back and tick "flat build"
-> select Programmer and browse
-> select the "prog_emmc_firehose_8937_ddr_000bf0e1.mbn"
Now it's time to enter the edl-mode with your smartphone
How to enter edl mode
a)Soft edl mode per adb
adb reboot edl
flush image with QFIL
b) )Soft edl mode per fastboot
fastboot oem edl
fastboot reboot-edl
fastboot reboot edl
(may not work for Hisense)
c)hard edl mode
https://www.oxygen-forensic.com/upl...s_based_on_Qualcomm_chipsets_via_EDL_mode.pdf
using a hardware cable (working 100% - preferred method!!!)
https://www.magnetforensics.com/blog/qualcomm-phone-edl-mode/
(working with Hisense A5)
by shortening the pins [not recommended!!!! Don't do this!!!!]
*** you need to open the device ***
https://forum.xda-developers.com/android/general/hisense-a5-how-to-enter-hardware-edl-t4103929
If you entered the edl-mode your Qfil screen should show
"Qualcomm HS-USB QDLoader 9008" (Com-Port)
like step 5 from here
https://forum.hovatek.com/thread-31475.html
Then Click Tools -> Partition Manager
step 9
https://forum.hovatek.com/thread-31475.html
confirm ok
step 10
https://forum.hovatek.com/thread-31475.html
select boot partition and right mouse click
manage Partition Data
we won't backup, we want to restore the boot-image
press Load Image and browse the boot.img from the edl-Firmware above, flash it and wait until it successful is flashed
if there's a Sahara error check again here
https://forum.xda-developers.com/showpost.php?p=77229641
Then flash recover.img and vbmeta.img
After that reboot your phone and it must boot the system.
Then Update in TF-mode to Firmware 6.09.06 (see above)
You successfully restored your bricked phone and updated the Firmware!
Thanks to joygram, Anghirrim, gowin132, giuseppemag
and all other sources of knowledge mentioned above!
Rooting your Smartphone Firmware 6.09.06
The Sim-Card still shouldn't be attached to the device
Files needed:
latest ADB-Drivers
https://forum.xda-developers.com/showthread.php?t=2588979
joygram Root-package for 6.09.06
attached files "RootKit R03"
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
Magisk Manager latest apk
https://github.com/topjohnwu/Magisk/releases
open developer mode in system settings
search settings `kernel version' and go
tab 7 or more : developer options enabled
* enable usb debugging
enter developer mode in system settings -> "other settings"
change USB computer connection to Transfer files(MTP)
Install the adb-drivers
Start Qfil-Software in Windows
Enter Edl-Mode while connectd phone to USB
->adb devices
use adb command
-> adb reboot edl
In Qfil
* flush ROOT files with QFIL : QFIL_6.09.06
-> Select Build Type : Flat Build
-Y Select Programmer : select
prog_emmc_firehose_8937_ddr_000bf0e1.mbn
->LoadXML:
rawprogram_000bf0e1_joygram
-> Download
when complete please reboot the device.
After install in system
* magisk manager
MagiskManager-v7.5.1.apk
Finally you have root!
Thanks to joygram!!!
https://forum.xda-developers.com/android/general/hisense-a5-root-gapps-customizer-t4097951
Debloating the Device privacy friendly
You restored your Firmware and have the latest Chinese Firmware 6.09.06 without Google Playstore installed
The Sim-Card isn't attached to the device
You're offline, no WiFi
You're rooted with Magisk Manager(but the bootloader is locked)
General Information
There are many ways to debloat the device.
This is only a description how I did this.
It doesn't mean that it's working for you. Please be careful. I am not responsible if oyu brick your phone. If this happened you should easily unbrick it.
So read it carefully and always check if you need the programs or not.
I debloated all system programs which I don't need and install alternatives from F-Droid Store which just need user rights
i.e.
AfWall+ as a Firewall (Root)
Calculator (SimpleMobileTools)
Calendar (SimpleMobileTools)
Clock (SimpleMobileTools)
Contacts (SimpleMobileTools)
Conversations
Dialer (SimpleMobileTools)
Editor
Essential Launcher
F-Droid
FairEmail
Foss Weather
Gallery (SimpleMobileTools)
Net Monitor for checking Net-Traffic
Open Camera
OSMAnd+
PrivacyBrowser
QuickDic
beside that:
TitaniumBackup Donate (Root) Backup & Freezing System-Apps
Total Commander (Root) file manager
VocalizerEx2 TTS
https://forum.xda-developers.com/showthread.php?t=2566795
I debloated everything that the main features of a smartphone still works:
Phone using a Sim-Card (incl. LTE, depends on your region)
TextMessages (SMS)
Internet data
WiFi (2.4 MHz, no 5Ghz)
Bluetooth
GPS
Doing backups from all system files you want to debloat with Total Commander
create directories with permissions 755
i.e.
system/_keepsave/
system/_keepsave/system
system/_keepsave/system/app
system/_keepsave/system/preload
system/_keepsave/system/priv-app
system/_keepsave/system/vendor
system/_keepsave/system/vendor/app
system/_keepsave/system/vendor/overlay
Then backup all directories to the keepsave dirs
system/app
system/preload
system/priv-app
system/vendor
system/vendor/app
system/vendor/overlay
Then setup the system settings
I disabled everything I don't need (location only Gps, automatic System Updates/Accounts, App shadow,...)
setting up Afwall to your needs
disabling captive portal login with some alternative url
disabling ipv6 in Afwall if you don't need it
Then you can try freezing system apps with Titanium Backup
Or just delete all the bloat you don't need.
I deleted in TotalCommander
system/preload
system/vendor/app
system/vendor/overlay
in system/app are only:
Code:
/system/app/CertInstaller don't remove
/system/app/CtRoamingSettings don't remove / freeze & use only if roaming
/system/app/Eink_Settings don't remove / Settings Clearview per App!!!
/system/app/ExtShared don't remove
/system/app/HardwareDetection don't remove
/system/app/NetworkSelect don't remove
/system/app/QtiTelephonyService don't remove
/system/app/SimSettings don't remove
/system/app/Vision_AutoRunManager don't remove
/system/app/Vision_Bluetooth don't remove
/system/app/Vision_CalendarProvider don't remove
/system/app/Vision_WifiDetector don't remove
/system/app/WeatherWidget don't remove / just freeze / navigation bar flickering! com.hmct.clock.systemwidget
/system/app/WebViewGoogle don't remove
in system/priv-app are only:
Code:
/system/priv-app/CarrierConfig don't remove
/system/priv-app/com.qualcomm.location don't remove / GPS
/system/priv-app/DefaultContainerService don't remove
/system/priv-app/ExtServices don't remove
/system/priv-app/ExternalStorageProvider don't remove
/system/priv-app/FusedLocation don't remove /GPS
/system/priv-app/InputDevices don't remove
/system/priv-app/MmsService don't remove
/system/priv-app/MtpDocumentsProvider don't remove / MTP
/system/priv-app/ProxyHandler don't remove
/system/priv-app/QcomMediaProvider don't remove
/system/priv-app/SettingsIntelligence don't remove / settings needed
/system/priv-app/SettingsProvider don't remove
/system/priv-app/Shell don't remove
/system/priv-app/StatementService don't remove
/system/priv-app/StorageManager don't remove
/system/priv-app/TelephonyProvider don't remove
/system/priv-app/TeleService don't remove
/system/priv-app/Vision_CallSettings don't remove
/system/priv-app/Vision_ContactsProvider don't remove
/system/priv-app/Vision_DocumentsUI don't remove
/system/priv-app/Vision_DownloadProvider don't remove just freeze
/system/priv-app/Vision_DownloadProviderUi don't remove
/system/priv-app/Vision_MmsProvider don't remove
/system/priv-app/Vision_NetworkSetting don't remove
/system/priv-app/Vision_PackageInstaller don't remove
/system/priv-app/Vision_PermissionManager don't remove
/system/priv-app/Vision_RecentsService don't remove
/system/priv-app/Vision_ScreenOffGesture don't remove
/system/priv-app/Vision_Settings don't remove
/system/priv-app/Vision_SystemUI don't remove
/system/priv-app/Vision_Telecom don't remove
After successful debloating the system to your needs, test with Afwall log and Net Monitor if there are outgoing system apps calling home
if so freeze or delete them or let Afwall just block them.
This setup works 100% for my needs, but that doesn't mean it works in the same way for you. Please be careful. I am not responsible if oyu brick your phone. If this happened you should easily unbrick it (see above).
Have fun with a debloated chinese Firmware
For the A5C version, the chinese stock rom if someone wants it (first seed, so it will take a while until there are more seeders).
HLTE202N_L1657.6.01.04.B5.zip.torrent
Shared with Dropbox
www.dropbox.com
danielvelezbravo said:
For the A5C version, the chinese stock rom if someone wants it (first seed, so it will take a while until there are more seeders).
HLTE202N_L1657.6.01.04.B5.zip.torrent
Shared with Dropbox
www.dropbox.com
Click to expand...
Click to collapse
Hi, Daniel!
Do you have the chinese sotock rom for Hisense A5 Pro (not CC)? My cell model is HLTE203T and i never can't update...
carlo.z.du4rdo said:
Hi, Daniel!
Do you have the chinese sotock rom for Hisense A5 Pro (not CC)? My cell model is HLTE203T and i never can't update...
Click to expand...
Click to collapse
Ahhh... Nope. I only got my hands into the A5C stock as it is what i got.
Hi, I'm leaving a mirror link for all Hisense A5 stuff that may be helpful in the future when original links will be dead. As a bonus there are offline OTA zip files for L1657.6.10.04.00, L1657.6.11.01.00 and L1657.6.12.01.00. When Software update downloads OTA it saves in /data/media/
Remember that OTA updates need to go in order like L1657.6.09.06.00 -> L1657.6.10.04.00 -> L1657.6.11.01.00 -> L1657.6.12.01.00. DO NOT UPGRADE from L1657.6.09.06.00 to L1657.6.12.01.00 directly.
OTA manual install:
0. Prepare at least 2 GB SD card and format it as FAT32
1. Rename desired OTA file to update.zip
2. Copy update.zip to the root of the SD card and after that insert the card into the phone
3. Go into recovery mode on the phone (I used ADB for that, if you want you can use key combination) 4. Connect it to pc via ADB (I'm assuming that you enabled USB debugging in developer options after clicking on kernel version 8 times in phone info)
4. Run `adb devices` and make sure that you allowed debugging on the phone
5. Run `adb reboot recovery` to boot into recovery mode
6. You will see 2 options on the screen - Choose 1st one
7. Now you will see 3 options - Choose 3rd
8. Now there will be 2 options - Choose 1st
9. Phone should update and reboot
Mirrored content:
Rom and OTA:
Hisense_A5_L1657.6.03.02.00_Full_Backup.7z (Backup using QFIL, every partition, official with GAPPS, flash using QFIL)
Hisense_A5_HLTE202N_L1657.6.03.02.00.7z (for debricking)
Hisense_A5_LA592C(HLTE202N)_L1657.6.09.06.00_TFDownload_202004090105_user.zip
Hisense_A5_L1657.6.10.04.00_OTA.zip
Hisense_A5_L1657.6.11.01.00_OTA.zip
Hisense_A5_L1657.6.12.01.00_OTA.zip
Root tools:
Hisense_A5_customizer-R04.7z
Hisense_A5_customizer-R05-06.10.04.00.7z
Hisense_A5_L1657.6.12.01.00_Magisk22.1_Root_by_Sillage.7z
FireHose_HiSenseA5.mbn
Hisense_A5_debloat.txt
Hisense_A5_block_hisense.sh
Hisense_A5_EDL_PINS_1.jpg
Hisense_A5_EDL_PINS_2.jpg
Hisense_A5_boot_recovery_vbmeta_6.03.02.zip
LINK: https://mega.nz/folder/QkVXUDLS#LWYIHVvuiOFxxeZpWruTlg
.
@gowings23
@JLowe
Would be possible to share:
- Stock ROM 6.12 Full QFIL Backup
- EFS/QCN backup files
- TWRP recovery (if you managed to get one)
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Sorry for my bad English.
צבי זלצברג said:
How I can install twrp and flash gsi rom on Doogee N20?
I found this but I'm doesnt know Russian: pda.ru/forum/index.php?showtopic=955032&st=1220#entry89836105 (I cant post URL because I'm new user, so I delete the "4" from "4pda")
Click to expand...
Click to collapse
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
jwoegerbauer said:
That's the Google translation:
A little instruction on how to get RooT. And so, everything that you do, as always, is at your own peril and risk! All data is erased when unlocked! Make BACKUP !!! Is always!!!! I. Unlocking Boorloder-a (required for flashing the phone and everything connected with it): 1. Go to settings -> system -> About phone -> Build number (7 clicks) (Congratulations !!!! You are a developer!) < - About phone -> For developers: Enable USB debugging and OEM unlocking. 2. We connect the phone to the computer and install the ADB usb driver (on the Internet), a connection request should appear on the phone, you need to allow it. 3. Extract files from the N20_utils.rar archive (10.87 MB) (preferably not very far, the root of the disk or the created folder N20 will be there). Go to the Unlocked Bootloader folder and run the bat file, the phone will reboot and display the request "unlock? Yes / no" rocker up - yes / rocker down - no. Naturally, you need to press the volume up, otherwise there were so many actions)) 4. Congratulations! Now, with each reboot, you will have an Orange state (5-second inscription), and the ability to do whatever you want with your phone. II. We sew! 1. For the lazy (who value their time). Download the SP Flash tool (Internet), from the N20_utils.rar archive (10.87 MB) select MT6763_Android_scatter and boot_magisk_20 files for the boot partition, lk_pached for lk, etc. you can even twrp instead of native recovery. Turn off the phone, connect it to the computer and click Download in the SP Flash programs. After the OK circle appears, disconnect and reconnect the cable (easier than a forced reboot). We turn on the phone and put the magisk manager (internet). Congratulations!!! You have a root and no Orange State label! 2. Who wants more and himself: phone to computer -> go to the Unlocked Bootloader folder -> run CMD -> write "fastboot flash recovery" put a space and move the TWRP file with the mouse to the window (fast path to the file) and press ENTER -> reboot the phone to fastboot. Congratulations!!! you have TWRP. Boot into TWRP, skip the encrypted DATE message, go to formatting and format the DATE. Go to mount and connect MTP. A phone will appear on my computer, we drop the files DisableForceEncryption_Treble (disable date encryption), orange_state_disabler_v0.3 (remove orange_state) and magisk.zip (internet) into the memory section. In TWRP, click install all this and rejoice! 3. Who has nothing to do at all: go to the forum thread Development and porting of GSI firmware (Post bullik01 # 71222655) and try what catches your eye. Not all are loaded, but .... (although we do not seem to have an A / B structure, but only "arm64 A / B" were launched) PS: look for additional information here on the forum and for brotherly devices UMiDIGI A5 Pro - Firmware ( Post Xakep1993 # 86772223) Attached files recovery-TWRP_3.3-20191015-1714.img (22.81 MB) DisableForceEncryption_Treble.zip (4.24 MB)
Click to expand...
Click to collapse
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
The file is in the forum. But to make your life easier here are the link.
https://drive.google.com/drive/folders/18B-srDVia_H4aDt7uvCDUxg2e4R5kVVY?usp=sharing The file is of type .exe and that extracts when you run on the pc, the problem is that I was suspicious about the virus so I threw the file in the total virus (if you don't know what it is, just search) and 6 programs pointed it out as malware but many others didn't find anything including karpersky and bit defender, there to make sure the files were there i renown they from .exe to .zip and I looked and the files really were there but as I don't want to take the risk I didn't extract and I didn't even try anything. The file that fix the encryption are inside doogee n20.exe, the guy said it will be in .exe and when you run it extracts the file in the C folder of the computer I recommend you to rename it from .exe to .zip because if the file have a virus you can screw your pc when running
Da-Judges said:
Good day
Had the same problem, (English not so good but I know you'll understand). What I did was just installing Corvus OS rom, the 11th version. It's been quite a while since i installed it.
Tried Lineage 18.1 and adding the smallest gapps available, but everytime i get code error 1. I guess it was the twrp 3.3 version i used cause some roms requer the latest TWRP versions. The lineage is installing just right nd can reboot to system with no hiccups.
None of Android 12 gsi versions has ever been able to installed. Cause when i try to install, i get the error of "file too large for the target partition. Tried everything from the net to increase the system partition to at-least 3gig. No success.....
Is anyone who can help to install android 12 even beta version will be ok for my N20 Doogee??
Thanx
Click to expand...
Click to collapse
you can use the pixel experience lite https://github.com/ponces/treble_build_pe/releases ( remenber the lite version, because is 2,5 gig) i try and instal in my phone and worked but i cant access my storage so i search and here are the solution https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/ i dont try it but if you want here are the solution
flairepathos.info said:
Hi, were you by any chance able to get a copy of these files ,Please upload if posssible
The original links are broken and the internet seemed to wipe all traces out, I'm looking for the N20_utils and possibly the Disable force encryption one
Click to expand...
Click to collapse
Hi, did you find N20_utils?