Hi guys,
I'm on Xiaomi.eu Stable 7.2.13.0 rom and it is a pretty stable and good rom. The only problem with it for me is the low speakers volume.
Checked some guides around and found a solution that "fixed" that issue for me at least. The sound is way more loud while still clear.
Credits to those guys - https://www.youtube.com/watch?v=LUBkAun9SaM, https://www.youtube.com/watch?v=ihpeowj73XI
Steps -
1. Must be rooted
2. Download ES File Explorer
3. Open app
4. On the left side tap Root Explorer
5. Press Mount R/W
6. On /system change the blue circle to RW and press OK
7. Tap Homepage and choose device
8. Press etc
9. Find and press mixed_paths.xml
10. When asked choose ES Note editor
11. Scroll down until you find Path Name - "Speaker" (was close to the end for me)
12. Tap the Pencil button
13. Change "RX7 and 8 Digital Volume" value = " to 95 (should be 84 by default)
14. Press back and when asked choose YES (to save)
15. Go back to root explorer, press Mount R/W and change /system back to RO
16. Reboot
17. You should have louder speaker now
You can change it back to default later if you want....
Tested on the rom i stated, no problems for me
Dude you're the best.
awesome work, thanks in advance!
Ty bro.
What are the strings to increase incall voice volume?
Nice find dude. Thumbs up.
I wonder if theres a wsy to make the recent menu scroll vertically like stock android, hmm. Xposed perhaps...
Hi,
Thanks for sharing.
Does it increases the earphones volume ?
any ideas how to make phone speaker(for calls) louder?
what strings to edit?
hello everybody ,
does anyone know how to increase speaker volume in miui 8 6.9.8 as it has mixer_paths.xml and mixer_paths_tasha.xml, which are completely different from 7.2.13 rom
i would appreciate any help
thank you
I've tried this guide on my Mi5 (Xiaomi.eu Weekly 6.10.13 rom) - But no changes of sound in the internal speaker.
Could somebody confirm this guide works in MIUI8 and mentioned ROMs?
Thanks in advance
For me is the only change that left to do to make it perfect, sincerely factory sounds a little low
please help to get
I hope someone would make a similar solution for MIUI 8
toulan said:
I hope someone would make a similar solution for MIUI 8
Click to expand...
Click to collapse
The config file is the same, so is the required modifications.
leledumbo said:
The config file is the same, so is the required modifications.
Click to expand...
Click to collapse
I'm not sure if you tried it, but from my experience it didn't work for me on MUI 8.
toulan said:
I'm not sure if you tried it, but from my experience it didn't work for me on MUI 8.
Click to expand...
Click to collapse
I did and it works. This base volume management is governed by the base Android version, which should be identical over the same major versions (could be compatible with other major versions, too. But no guarantee). MIUI 7 & 8 for Mi 5 only differs in patch (6.0 vs 6.0.1), so for this one they're the same.
I only find the file mixer_paths_tasha.xml and making the settings of post 1, it does not work
Hi guys. Someone have found a way to increase volume on MIUI v8? Thx
fabietto081086 said:
Hi guys. Someone have found a way to increase volume on MIUI v8? Thx
Click to expand...
Click to collapse
I'd like to know, too
fabietto081086 said:
Hi guys. Someone have found a way to increase volume on MIUI v8? Thx
Click to expand...
Click to collapse
i followed another solution in this forum, you have to overwrite the mix_patch files from the china rom to our global rom. This is the link
https://forum.xda-developers.com/mi...dio-volume-t3524017/post70210358#post70210358
felixmorillo said:
i followed another solution in this forum, you have to overwrite the mix_patch files from the china rom to our global rom. This is the link
https://forum.xda-developers.com/mi...dio-volume-t3524017/post70210358#post70210358
Click to expand...
Click to collapse
Trying to compare the two files on my Mi Max now.
felixmorillo said:
i followed another solution in this forum, you have to overwrite the mix_patch files from the china rom to our global rom. This is the link
https://forum.xda-developers.com/mi...dio-volume-t3524017/post70210358#post70210358
Click to expand...
Click to collapse
I try this way but the volume still low...
Related
Hi,there is a new MIUI 2.4.20 at the link below; if anyone can mirror it to us,i will be appreciated.My country forbid to access to 4shared
http://www.4shared.com/zip/8Lw4Mjve/MIUI_streak_2420_by_HARAM.html
whats the difference ? its the same Nitin is doing??
jitin02 said:
whats the difference ? its the same Nitin is doing??
Click to expand...
Click to collapse
I don't know all the differences but it is not same as the Nitin's miui; it includes something from Hpa and it includes volume plus.
I can't read Korean so i can't understand all the differences.
Testing.
Would you please mirror it to another file sharing server?
I can't access to 4shared
http://arleybarros.com/MIUI_streak_2.4.20_by_HARAM.zip
arleybarros said:
http://arleybarros.com/MIUI_streak_2.4.20_by_HARAM.zip
Click to expand...
Click to collapse
Thank you!
Did you flash it?
How is the results?
yes i did.
i really dont know much about miui roms, but it looks very stable so far.
Here's another link (to my dropbox) if needed:
http://dl.dropbox.com/u/43165183/MIUI_streak_2.4.20_by_HARAM.zip
Haven't tried it though.
Thanks to both of you!
Does it have US English language?
Agent5150 said:
Does it have US English language?
Click to expand...
Click to collapse
Yes,also the translation is perfect.
You could try editing build.prop i changed the entries ending in.
ko to en
KR to EN
I got this info from the another thread here, but cannot remember which one.
I'm guessing here but you could try US and us.
I have know idea if it will work.
pjg_pigeon said:
You could try editing build.prop i changed the entries ending in.
ko to en
KR to EN
I got this info from the another thread here, but cannot remember which one.
I'm guessing here but you could try US and us.
I have know idea if it will work.
Click to expand...
Click to collapse
Be sure,it will work.I tried these settings many times.
Seems to work fine. A few cool apps have been added. Overall looks nice.
English Language
This Rom already have EN language, Setting > System > Input and Language, certainly by Korean language in the firstboot. I don't know Korean but I remember position of setting button when I set up my DS.
This Rom's slower than the first 2.2.40 MIUI rom and non support Unicode font
I am running this since last night and extended MIUI settings app works. Battery life is perhaps the best I have seen on any of the MIUI versions I have used on my Streak so far....
sinan33 said:
Thanks to both of you!
Click to expand...
Click to collapse
Nice rom
Well, a short review after clean install of this ROM
FIXED/ENHANCEMENTS:
1) wifi issues
2) app drawer works
3) clear voice however loudness bug still exists
4) superSU instead of SU
5) Keyboard skin and customization
Bugs/broken:
1) DND mode force closes
2) Music player lyrics
3) LED notification still buggy
4) app drawer can't be enabled on boot
5) xiaomi passport backup still doesn't work
6) localization issues, not many languages supported
7) battery life seems to be better but may show different result after calibration
End result: uninstalled after 6 hrs of use, reverting to fake CM9
Sent from my DELL PHABLET using Tapatalk 2
awesome rom!
looks amazing...
themed it to ics
running well...
great tweaks here and there...
recommended!!!
Hey xda Community,
this is my first thread, i hope i dont do anything wrong :fingers-crossed:
So i just flashed CM 10.1 yesterday and its awesome and so on but for myself the Sound on Headphones was kinda low. So i tried to increase it by Default_gain.conf aaaaaaaand i realised, cyna dont have this conf file.
After some Research i found this way which i will show you below to increase the volume on Galaxy Note 2 :
What you need :
-----------------------------------------------------------
Root Explorer
Rooted Galaxy Note 2 with CM10.1 ( I dont know if this works for CM10.2 but i think it will) ->>Doesnt work in 10.2
thats it
-----------------------------------------------------------
1. Open Root Explorer
2. Go to System -> etc -> Sound
3. There should be a config file named "t03g"
4. Open it with any text Editor ( you have to Change a Value so be sure you have permissions)
5. Scroll down to this section :
<device Name= "Headphone">
6. Change the Value from "50" to "57" "<ctl Name="Headphone Volume" val=57"/> (attached you will find a screenshot )
7. Restart your phone!
This makes your Galaxy Note 2 louder on cynagogenmod Well for me it did.
-----------------------------------------------------------
Final words :
I dont really understand how this val works I frist tried "val" 70 and the Sound was significant quieter than val "50". So i tried "val30" and it was louder than "val 70"
Then i just tried values between "50-60". "59" was to loud for me and "57" was perfect
If someone know why this works like that, Explanation is much appreciated
aaaaaaaaaand last but not least : sorry for my bad english, im just more than 24 hrs awake. Please dont grammar nazi me
oh i almost forgot : Be careful with this, im not responsible for your Actions!
greetz Okanmojo
Awesome mod, works perfect, thank you very much for ur findings..... Regards.
Sent from my GT-N7100 using Tapatalk 4
Does not work in 10.2
Sent from my SGH-T889 using xda premium
thxxxxxxxxxxx
It is not working on CM 10.2.. Moreover after editing the file the sound is completely gone like there is no pyhsical speaker. Even though I edit the value back to 50 still there is no sound. The only way to bring sound back is to flash the CM 10.2 ROM and Gapps again.. Do you know why?
_delice_doluca_ said:
It is not working on CM 10.2.. Moreover after editing the file the sound is completely gone like there is no pyhsical speaker. Even though I edit the value back to 50 still there is no sound. The only way to bring sound back is to flash the CM 10.2 ROM and Gapps again.. Do you know why?
Click to expand...
Click to collapse
Fix file permission and reboot. That may help you.
sent from my GT-N7100. Press thanks if I helped..
it's works on android 4.3 (slimbean), thanks!
how do i incease the speaker or other stuff. what I'm getting at is what do i touch and leave alone
Hi all, I have modded the Xperia SP snd_soc_msm_2x file so that it will use earpiece aswell as loudspeaker while playing music, watching youtube etc.
I found this on monivan's stereomod thread for the xperia Z (which i have) and I find it so cool that I wanted this on my sister's XSP so now I'm sharing here with you!
Also, want to make clear that @monivan did make the initial test file for XSP.
Without him i probably didn't make this for you guys!
First of all, PLEASE DO A BACKUP OF YOUR CURRENT FILE BEFORE PROCEEDING!!
It is located in /system/etc/snd_soc_msm/snd_soc_msm_2x
DISCLAIMER:
Everything you do is your choice, if you missing any important call or getting fired because of alarm didn't work, you busting your earpiece or thermonuclear war starts off and you point your finger at me, I will laugh at you.
I take no responsibility for your actions.
REQUIREMENTS :
-Rooted phone with busybox installed
-Stock rom (may also work on AOSP/CM, don't know try it yourself and let know here)
NOTE: THESE ARE NOT FLASHABLE ZIP FILES!
How to install:
1. Download SurroundSound-xx-xx.zip file.
(links available in download section)
(if not available request desktop version)
2. Move your stock/current snd_soc_msm_2x from /system/etc/snd_soc_msm to any location on your sd card.
3. Unzip the zip file you just downloaded and copy to /system/etc/snd_soc_msm
4. And set correct permission rw-r-r a.k.a. 0644
Like this:
XX0
X00
X00
5. Reboot
6. Turn down your volume before using and increase slowly to test safely.
I tuned volume values so that sound is not distorting at all kind of genres, with any music player at full volume with no equaliser settings active.
But please be careful using this!!
To test if it works see: Left/Right Stereo Audio/Visual Test.: http://youtu.be/dvqbq_0jZ_U
Have fun!
V 1.1
-Added a low frequency filter to prevent distortion
-little lower volume, especially with Xloud off
-Optimised layout
V 1.2
-Added Multiple versions to better fit anybody need's
DOWNLOADS:
combined left/right channel (may result in distortion at high volume's)
- normal https://www.mediafire.com/?euft8b78mhee0bz
- loud https://www.mediafire.com/?euft8b78mhee0bz
seperated left/right channel
- normal https://www.mediafire.com/?bthh1g36cc7ti74
- loud https://www.mediafire.com/?06iay379zv65n9y
Credits: @monivan for making this for XZ and create initial test file for XSP, without him you wouldn't have this by now @dontbelive for finding this on Z1, without him monivan didn't bring this to XZ @Sony
@my sister for testing on her XSP
already tried it, here's my feedback:
- no noticable change in loudspeaker
- mess my headset, left one has smaller audio
by the way, i have v4a installed on master rom v5 white
cipetonk said:
already tried it, here's my feedback:
- no noticable change in loudspeaker
- mess my headset, left one has smaller audio
by the way, i have v4a installed on master rom v5 white
Click to expand...
Click to collapse
Ok I reuploaded the file just to be sure.
About loudspeaker: there is not supposed to be changes in that, this mod links the earpiece to loudspeaker to play together.
You can test this by putting your finger on the back speaker to cap it off while playing music, or see this: Left/Right Stereo Audio/Visual Test.: http://youtu.be/dvqbq_0jZ_U
About your headphones: I have changed nothing to that, only to speaker and earpiece.
You can try replacing your original file and disable v4a, test, then replace it with this mod and test again :thumbup:
Anyone tried on cm ? My loudspeaker got damaged and im out of warranty xD
Sent from my C5303 using XDA Free mobile app
DjowBr said:
Anyone tried on cm ? My loudspeaker got damaged and im out of warranty xD
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
I've tested on both aosp and stock rom, are you sure your speaker is damaged?
Did you have any other audio modification installed? Any equalizer settings?
Maybe you can try to reset those or flash another rom and try this again. To make sure
langeveld024 said:
I've tested on both aosp and stock rom, are you sure your speaker is damaged?
Did you have any other audio modification installed? Any equalizer settings?
Maybe you can try to reset those or flash another rom and try this again. To make sure
Click to expand...
Click to collapse
Yeah, im sure...i can see the speaker scratch through the hole, so the sound is quiet and distorted. Looking to change this but cant find the speaker.... with this mod hope i can hear when i receive calls. Thx man
DjowBr said:
Yeah, im sure...i can see the speaker scratch through the hole, so the sound is quiet and distorted. Looking to change this but cant find the speaker.... with this mod hope i can hear when i receive calls. Thx man
Click to expand...
Click to collapse
So you did have cm DSP manager bass enhancement activated when trying this?
I'm asking this so that it can warn others maybe.
Also, you mean the speaker on the back of the phone? Loudspeaker?
Coz that's strange since I didn't increase volume for back speaker.
doubt
How much battery does it drain ?
dev002 said:
How much battery does it drain ?
Click to expand...
Click to collapse
Depends on volume and how many music / movies you play. But I don't think it consumes much.
Updated OP with new link and changelog. Not tested yet, let know how it goes!
Which the responsible line and the loudspeaker and voice recording?
Marília de Oliveira said:
Which the responsible line and the loudspeaker and voice recording?
Click to expand...
Click to collapse
I will make a little tutorial for all of you, like I did for Samsung s5 surroundsound mod.
langeveld024 said:
I will make a little tutorial for all of you, like I did for Samsung s5 surroundsound mod.
Click to expand...
Click to collapse
I am awaiting. I increased the sound from my but I can not record more audio voice by whatshapp always crashes. I will wait for your tutorial. thank you:laugh:
would u plz make flash recovery zip file or those who are amatur like me ?
salamkonaziz said:
would u plz make flash recovery zip file or those who are amatur like me ?
Click to expand...
Click to collapse
Will look into that, but first I'm digging in creating better sound quality.
Although manual install is simple, just follow step by step instructions in OP and make sure to backup before.
anyone willing to help me test this some more?
Any mod available for 4.4.x cyanogenmod?
Sent from my Xperia SP using XDA Premium 4 mobile app
teck_keeda said:
Any mod available for 4.4.x cyanogenmod?
Sent from my Xperia SP using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Try it if don't work, send me your snd_soc_msm2x file
The booting wont get completed if we revert the original file!!!
langeveld024 said:
Hi all, I have modded the Xperia SP snd_soc_msm_2x file so that it will use earpiece aswell while playing music, watching youtube etc.
I found this on monivan's stereomod mod for the xperia Z (which i have) and I find it so cool that I wanted this on my sister's XSP so now I'm sharing here with you!
Also, want to make clear that @monivan did make the initial test file for XSP.
Without him i probably didn't make this for you guys!
First of all, PLEASE DO A BACKUP OF YOUR CURRENT FILE BEFORE PROCEEDING!!
It is located in /system/etc/snd_soc_msm/snd_soc_msm_2x
DISCLAIMER:
Everything you do is your choice, if you missing any important call or getting fired because of alarm didn't work, you busting your earpiece or thermonuclear war starts off and you point your finger at me, I will laugh at you.
I take no responsibility for your actions.
REQUIREMENTS :
-Rooted phone with busybox installed
-Stock rom (may also work on AOSP/CM, don't know try it yourself and let know here)
How to install:
1. Download snd_soc_msm_2x.bin file here: mediafire.com/view/aaaxr1xqxl755wh
(if not available request desktop version)
2. Move your stock/current snd_soc_msm_2x from /system/etc/snd_soc_msm to any location on your sd card.
3. Copy the snd_soc_msm_2x.bin file you just downloaded to /system/etc/snd_soc_msm
4. Rename to snd_soc_msm_2x (delete only ".bin")
and set correct permission rw-r-r a.k.a. 0644
Like this:
XX0
X00
X00
5. Reboot
I tuned volume values so that sound is not distorting at all kind of genres, with any music player at full volume with no equaliser settings active.
But please be careful using this!!
To test if it works see: Left/Right Stereo Audio/Visual Test.: youtu.be/dvqbq_0jZ_U
Have fun!
V 1.1
-Added a low frequency filter to prevent distortion
-little lower volume, especially with Xloud off
-Optimised layout
Credits: @monivan for making this for XZ and create initial test file for XSP, without him you wouldn't have this by now @dontbelive for finding this on Z1, without him monivan didn't bring this to XZ @Sony
@my sister for testing on her XSP
Click to expand...
Click to collapse
Hi my phone is running on CM11 and i did as u said above, but i didnt like this much, so i reverted with original file. i dont know whether it is because i forget set permission for the original file the phone was not booting to the home screen, it was juz running the CM logo. So i had no other way than flashing again with CM11 zip.
Anyone could find any way to get the original Xperia SP sound and display back in CM11?
Is there any way to add Clear Audio+, True Bass, XLoud and Bravia engine 2 to Xperia SP running on CyanogenMod11 ??
Please Help..
sivakrishnan said:
Hi my phone is running on CM11 and i did as u said above, but i didnt like this much, so i reverted with original file. i dont know whether it is because i forget set permission for the original file the phone was not booting to the home screen, it was juz running the CM logo. So i had no other way than flashing again with CM11 zip.
Anyone could find any way to get the original Xperia SP sound and display back in CM11?
Is there any way to add Clear Audio+, True Bass, XLoud and Bravia engine 2 to Xperia SP running on CyanogenMod11 ??
Please Help..
Click to expand...
Click to collapse
The bootloop you describe has nothing to do with the file. Phone boots fine without it.
And to answer your question, no. Only way is run stock rom.
This modification definitely fix the low mic issue on call without affect anyone else.
Simply extract the rar file and put LowMicFix.zip and LowMicFix.prop files on your phone. Reboot your phone into custom recovery mode (TWRP, CWM) and flash LowMicFix.zip.
This solution work now on All ROM !
For more confort if you are on Rom with CyanDelta installed, put LowMicFix.zip and LowMicFix.prop in the Cyandelta folder and in the app option add LowMicFix.zip to " Install additional zip after ROM ".
Change applied in build.prop by the fix V1_Final
BEFORE FIX
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
AFTER FIX
ro.qc.sdk.audio.fluencetype=fluence
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=false
Click to expand...
Click to collapse
[UPDATE V1_Final (All Rom)]
- Fluence Noise reduction works for all android Rom version ( KK - Lollipop )
- " Ok google " hard voice detection fixed
- I need your back if all is Ok or Not !
[UPDATE LOLLIPOP ROM] OUTDATED
- Fluence Noise reduction is back and functional for all Call Mode !
[UPDATE V0.2] OUTDATED
- Reactivate voice clarity
- Reactivate 2 mic and fluence for speaker Mode ( now people may not hear themselves )
[UPDATE V0.1] OUTDATED
- Works on ALL ROM for One Plus One.
- For prevent BootLoop if one or more lines on the fix exist in original build.prop, the script remove it before install the fix.
OPO - LowMicFix_V1_Final_tazzkiller is the best for all Rom, install or update to it !!
thank to klenamenis for his "tweakprop" tools.
has anyone tried this?
tazzkiller said:
After few day on test, this modification definitely fix the low mic issue on call without affect anyone else. The solution comes from the same problem encountered on the LG G2 and fixed by LG in its stock Rom. I create a recovery zip for apply it.
Simply extract the rar file and put LowMicFix.zip and LowMicFix.prop files on your phone. Reboot your phone into recovery mode (TWRP, CWM) and flash LowMicFix.zip.
This zip change and add the necessary lines to fix it in the build.prop file. this solution work on all rom based on CM11 or CM12.
thank to klenamenis for his " Dynamic automated build.prop editing ".
Click to expand...
Click to collapse
has anyone confirmed that this works as stated?
Please and thanks in advance.
sanjsrik said:
has anyone confirmed that this works as stated?
Please and thanks in advance.
Click to expand...
Click to collapse
dont take this the wrong way but you can test it out and let the community know. I mean its just addition to your build.prop as I read it and it wont blow your phone up
Also he has 3 thanks and I would assume thats there for a reason
Never unheard of to ask for second opinions, don't you think?
playya said:
dont take this the wrong way but you can test it out and let the community know. I mean its just addition to your build.prop as I read it and it wont blow your phone up
Also he has 3 thanks and I would assume thats there for a reason
Click to expand...
Click to collapse
1. I'm sure this is harmless, yet, asking for backup isn't unheard of here. I'd rather ask before trying to see if this has been vetted by others. Not clubbing baby seals by asking.
2. People click "thank you" all the time. Look I even clicked it for you.
Don't worries, the zip create a backup of your build.prop before change and add new line on it. But you are right, 200 download and nothing people say it's good or not ! But i think, no news.... Good news !
Good Morning. I could not even test the impact , but the OPO remains functional in any case. The changes in the build.prop set the OPO not in the bootloop .
Does this patch fix the 2G issue that the voice is scrambled in calls when using the internal mic?
Will this mod affect this "true stereo mod"?
http://forum.xda-developers.com/oneplus-one/development/mod-oneplus-one-stereo-mod-t2967925/
I'm on cm11 with ak kernel
remix96 said:
Will this mod affect this "true stereo mod"?
http://forum.xda-developers.com/oneplus-one/development/mod-oneplus-one-stereo-mod-t2967925/
I'm on cm11 with ak kernel
Click to expand...
Click to collapse
No my fix doesn't touch any xml config file of android, only edit your build.prop for specific configuration of the hardware mic material.
Added to OnePlus One index thread:
[INDEX] OnePlus One Resources Compilation Roll-Up
Transmitted via Bacon
Updated to V0.1 ( see first post for details )
sanjsrik said:
1. I'm sure this is harmless, yet, asking for backup isn't unheard of here. I'd rather ask before trying to see if this has been vetted by others. Not clubbing baby seals by asking.
2. People click "thank you" all the time. Look I even clicked it for you.
Click to expand...
Click to collapse
I get it but I mean research the zip and see what it's doing then try it. We flash roms to our phones from people we do not know everyday. Oh well I hope you tried it and it helped you out. No seals were harmed in this post.
Take it easy
This fix (the first version) did NOT work for me. I'm running on the latest nightlies of CM12 on my OPO. Is it worth trying v0.1? Also, for those worried about anything going wrong you can easily just flash the latest nightly directly or via CyanDelta and all the changes will go away.
+yamsta have you see in the build.prop if new lines are here ?
Wouldn't it be easier just to provide the required changes as well? I do not like flashing ZIPs without exactly knowing what is going to be changed.
_TB_TB_ said:
Wouldn't it be easier just to provide the required changes as well? I do not like flashing ZIPs without exactly knowing what is going to be changed.
Click to expand...
Click to collapse
If you want to know exactly. Open that updater.script then read and know.
Sent from my A0001 using Tapatalk
_TB_TB_ said:
Wouldn't it be easier just to provide the required changes as well? I do not like flashing ZIPs without exactly knowing what is going to be changed.
Click to expand...
Click to collapse
for more reliability, it's easier for the user to flash a zip than manually edit a file and less dangerous.
For more simplicity, add the zip to Cyandelta additional zip automated the process after all new nightly
gnan10 said:
If you want to know exactly. Open that updater.script then read and know.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Simply open LowMicFix.prop the process are stored here
tazzkiller said:
for more reliability, it's easier for the user to flash a zip than manually edit a file and less dangerous.
Click to expand...
Click to collapse
Maybe so, but for more clarity, it's always better for someone who puts up a fix to state exactly what the fix is doing, so users can evaluate whether they want to try it or not. Please list out the changes that your patch makes, and how it tries to fix the issue. Thanks.
Updated to V0.2 ( see first post for details )
Updated for all lollipop rom ( see first post for details )
The Ultimate Experience!
Your headphones could be much better than you thought!
It makes my QuadBeat 2 headphones soundbetter than $50 Sennheiser ones. And you can use it with those headphones as well! (tested!)
This is a combination of eXtremeBeats audio mod with my own Viper4Android profiles. It is very versatile, and it works with all headphones & ROMs.
The biggest difference is in the bass, you will be amazed, I can promise you that!
What do you need?
A brain.
Root & Recovery.
50MB of system space are required.
A full system backup!
Viper4Android app (you can download it here).
SELinux set to permissive. (via http://forum.xda-developers.com/showthread.php?t=2524485, google for help)
Any headphones.
What do I have to download? Do you have...
Android 6.0 Marshmallow? Do you encounter any compatibility issues (eg. Maxx audio force closing)? Download version 4.1 Muses of eXtremebeats.
Lollipop? Kitkat? LG Stock? AOSP? Anything but android M 6.0? Download version 5.0 Apollo (or higher) of eXtremeBeats.
eXtremebeats download here: http://forum.xda-developers.com/showthread.php?t=2634729
Download latest apk of Viper4Android FX here: http://vipersaudio.com/blog/?page_id=48
Official thread and credits: http://forum.xda-developers.com/showthread.php?t=2191223
My Viper profiles will be in the attachment below!
How do I install this?
After downloading and placing all the files to your internal storage, do this:
If you have Android 5.0/5.1 then go to developer options and make sure you disable the Nu Player and use Awesomeplayer instead.
Install the correct version of eXtremeBeats zip via the recovery.
Extract the ViPER4Android folder from my zip to your internal storage.
Install Viper4Android app (if you don't have it already), open it, and select Super Audio Quality driver, then reboot.
Open Viper4Android - press the menu button - UI Setting - Expert.
How do I use this?
Connect your headphones - open Viper4Android - press the menu button - Load Effect Profile - and load a profile of your choice!
Which profiles should I use?
If you are on LG based ROM (stock LP, KK) then use LG ROM Bass profile.
If you are using AOSP, use AOSP Bass or AOSP Rock profile.
If you want to create a new profile, then use Basic Template as a template - it has an equalizer made for QuadBeat2 headphones.
If you're using different headphones, then try these profiles first, and customize them to your taste. It will work without any problems.
Do not be afraid to experiment with Viper, try all the settings, change them, combine them, create new profiles and most of all, don't forget to press thanks!
Note: I did not create the eXtremeBeats mod, but I felt like I have to share my combination with you, because the music sounds amazing, no matter the ROM (stock/AOSP).
Wow! My headset sounds great! Thanks op well done! :good:
Added to index
[INDEX][LG G2] ROMs, Kernels, Guides and more
Sorry but i am kinda noob. I extracted your zip and found 3 folders DDC, Kernel & Profile (AOSP BASS, AOSP ROCK Basic Template & LG ROM Bass ). And i don't have any idea which folder where to place required your help.
Profiles need to be place in viper/profiles but i dont know abour other files
And one more thing everytime i am opening viper app it is asking to install driver which i have done already multiple times.
rajkatiyar07 said:
Sorry but i am kinda noob. I extracted your zip and found 3 folders DDC, Kernel & Profile (AOSP BASS, AOSP ROCK Basic Template & LG ROM Bass ). And i don't have any idea which folder where to place required your help.
Profiles need to be place in viper/profiles but i dont know abour other files
And one more thing everytime i am opening viper app it is asking to install driver which i have done already multiple times.
Click to expand...
Click to collapse
All 3 folders should be extraced to the ViPER4Android folder in the sdcard folder (meaning the DDC, Kernel and Profile folder is inside ViPER4Android folder).
Did you grant Viper root permissions? Did you reboot after isntalling the driver? Is your SELinux set to permissive? If so, then try to google for help.
danek731 said:
All 3 folders should be extraced to the ViPER4Android folder in the sdcard folder (meaning the DDC, Kernel and Profile folder is inside ViPER4Android folder).
Did you grant Viper root permissions? Did you reboot after isntalling the driver? Is your SELinux set to permissive? If so, then try to google for help.
Click to expand...
Click to collapse
Root Permissions - Yes
Reboot - Yes
SELinux- Yes
No alternative for 4.4.2?
You can use same for that too.
rajkatiyar07 said:
Root Permissions - Yes
Reboot - Yes
SELinux- Yes
Click to expand...
Click to collapse
Well, then try Google, because I have no idea what went wrong. It is a problem with Viper.
bouighil said:
No alternative for 4.4.2?
Click to expand...
Click to collapse
What do you mean no alternative? It does work for 4.4.2, just use the 5.0 version, as mentioned.
danek731 said:
What do you mean no alternative? It does work for 4.4.2, just use the 5.0 version, as mentioned.
Click to expand...
Click to collapse
Sorry i was confused lol
I've tried your tutorial and i just can say WOOOOOOOOOW awamzing bass and sound. Tnx
Tried this mods with kitkat based optimusflex rom at work as it should feels like my ears will blow
sheikhramnuj said:
Tried this mods with kitkat based optimusflex rom at work as it should feels like my ears will blow
Click to expand...
Click to collapse
Try setting the UI settings to Expert in the Viper menu, and lower the bass boost a bit.
Or, if you like it that way, try playing with the settings a bit.
Please try to share it with more people, as I feel it does not get as much views as it deserves.
danek731 said:
Try setting the UI settings to Expert in the Viper menu, and lower the bass boost a bit.
Or, if you like it that way, try playing with the settings a bit.
Please try to share it with more people, as I feel it does not get as much views as it deserves.
Click to expand...
Click to collapse
Thanks for the tips mate. I just reduce some bass effects. I already share your mods to our facebook group and they like it very much of course all credits goes to you Keep it up!
i am enjoying this thing ,,just wow.. where can i find more profiles ? any 1 ?
rajkatiyar07 said:
i am enjoying this thing ,,just wow.. where can i find more profiles ? any 1 ?
Click to expand...
Click to collapse
Just load up basic template profile (with the equalizer only) and try setting things up by yourself! Set the UI settings (in the Viper menu) to Expert, and try changing the Convolvers
danek731 said:
Just load up basic template profile (with the equalizer only) and try setting things up by yourself! Set the UI settings (in the Viper menu) to Expert, and try changing the Convolvers
Click to expand...
Click to collapse
Thanks for replying bud.. I live in India .. It is 5 AM here .. I think i am gonna my office today lol. i am new thats why i was asking for cooked meal. but i think i am on my own in this business :silly: will figure out soon how things work.
Just tried this mod and i'm not sure I did things correctly and just want to make sure of a few things.
1.) I am using a 5.1.1 rom so I installed extremebeats 5.0. Is that correct?
2.) I see that there were 4 apks installed into my system\app folder, but not in a specific app folder like other system apps. Also, those apps don't show up in my apps list. Is this all normal? Am I supposed to have access to those apps for any reason?
Thanks for any help....
flyinjoe13 said:
Just tried this mod and i'm not sure I did things correctly and just want to make sure of a few things.
1.) I am using a 5.1.1 rom so I installed extremebeats 5.0. Is that correct?
2.) I see that there were 4 apks installed into my system\app folder, but not in a specific app folder like other system apps. Also, those apps don't show up in my apps list. Is this all normal? Am I supposed to have access to those apps for any reason?
Thanks for any help....
Click to expand...
Click to collapse
You cant install V4A on 5.1.1 . Perform a full backup if you are going to try. You can flash Extremebeats too but as i said before run a full backup in recovery to secure your device and avoiding bootloops . Before all these check if your SELinux is set to permissive .
---------- Post added at 12:46 PM ---------- Previous post was at 12:42 PM ----------
My goodness i collected lot of irs and now going to mess with them . God help me if i could create some wonder
rajkatiyar07 said:
You cant install V4A on 5.1.1 . Perform a full backup if you are going to try. You can flash Extremebeats too but as i said before run a full backup in recovery to secure your device and avoiding bootloops . Before all these check if your SELinux is set to permissive .
---------- Post added at 12:46 PM ---------- Previous post was at 12:42 PM ----------
My goodness i collected lot of irs and now going to mess with them . God help me if i could create some wonder
Click to expand...
Click to collapse
I believe the problem is somewhere else, because I use BlissPop based on CM 12.1 (Android 5.1.1) and I am using Viper.
So, you can install Viper on Android 5.1.1.