So I saw the posts showing how others have had playlmp, lmp, ipod files that they would edit for line to make the phone boot when you plug power in... But this phone doesn't have any of those names in system/bin... Tons of files but not those names...
Running 4.1 android
Basically I want when the phone is off, if I plug power in it will auto boot. As it is now, the phone will not boot, it's just turns on to the green battery bar, moving up and down indicating it's charging... Please help
BTW I AM ROOTED
Related
I have a problem with my Galaxy Tab 10.1, yet can't seem to figure out where to start troubleshooting.
Having the Tab since it was released, until now, I had yet to experience any problems whatsoever. But upon turning (or trying) to turn my Tab on, all that welcomed me was a black screen. I know the various button combinations, screen rub trick, and holding the power button long enough to help boot the Tab up but none of this worked. I thought maybe my battery was dead (even though I has seen it at about 60% before the problem) and decided to plug it in.
Once plugged in, the battery charging indicator came on and looked like it was about to show the battery filling up. Instead, the screen turned off immediately one second later and then popped up again with the battery icon. It would then just go on and off. Holding the power button would result in the "Samsung Galaxy Tab 10.1" welcome screen, but this would transition back to the battery icon, and turn off as usual.
I was able to access the two icons (box with an arrow and android; and android with download underneath) by holding power and vol. down. Clicking on the first icon with the box would just turn off the Tab and restart the battery icon. But clicking on the android that has the word download underneath takes me to a screen that I don't know what to do with.
This all happens while plugged in to the charger, and goes away immediately (turns off) if I take out the cord. I have tried to use the NVflash method but am basically stumbling in the dark because my computer doesn't recognize the Tab when I plug it in. It does say installing device when plugged in, but I cannot find it under devices.
Any help would greatly be appreciated!
P.S. My Tab (32 GB) has an unlocked bootloader, but the unlocked sign does not show up when I plug it in and and the Samsung welcome screen breifly pops up.
I am not a developer, so ultimately someone else will help you more than I, however the fact that you can get to ODIN means you will be able to save your tablet. There are some posts in the development section about using ODIN (that’s where you go after selecting the icon on the right), but you will be able to flash everything you need to in order to get back on your feet from within ODIN.
Does anyone know how to change the ViewPad 7 boot behavior when power is plugged in when the device is turned off? Right now it only shows a charging animation but I would like it to boot straight into Android as soon as a power source is plugged in. Any ideas?
Moved to General.
Dear all I have look up in the past posts but it doesn't help
The phone show a 100% charged battery logo when plug in to PC, but won't turn on
ADB Interface cannot list the phone (maybe I didn't turn on the debugging mode before this problem happens)
The phone cannot go into Recovery/Download mode
When I put it on charge, it vibrate and charge symbol shows for a few seconds and then it would go to sleep. If I press volume up/down or home button, the charge symbol pops up again. but not for the power button.
Please Help. Thanks.
Hmm. It either could be really sinister... Or simple.
Have you considered the power button may be faulty? That would account for it not turning on, but waking when you press the volume key. It would also not allow you to enter recovery or download mode. Its apparently (I haven't needed to myself) not hard to DIY replace it. Search on here/google for how to do it, I don't have a specific guide in mind though sorry.
Sent from a galaxy far, far away
I have several issues with my gt-p7510, ics 4.04.
The first is, there are some files i just can't delete. Not system files, some created by me and others downloaded. I've tried some file managers without success; there's no error msg, they just remain there.
The second is i have difficulties to turn on the device: i have to press the power button + volume down for like 30 seconds whenever i want to turn it on; besides, the device wont charge battery if i turn it off first. To make it charge i must connect it while is on and after that turn it off, that's the only way to get the battery charging animation while is off.
Is similar to the classic "my tab wont turn on" and "dont charge" but, i have to do the trick every time i turn it off. An i dont have battery issues, isnt rooted, has official firmware and battery has never been replaced.
Like i wrote, i must hold down power + volume down for like 30 seconds every time i have to turn on the device.
Any help?
After leaving the tablet to charge overnight, I found that it was stuck on the wave animation. Holding the power button fixed it and gave me the ability to use it again. Unplugged charger and thought tablet was ok. After a while I find that it's stuck in the animation again, so I figure a restart would do it good, after holding the power button for who knows how long I manage to restart it, but it gets stuck at the "restarting" message. After a while it falls asleep and when I wake it up, it is once again stuck in the animation. I hold power button, but this time nothing happens, so I open the micro SD thing next to the charger thing, and press the tiny red thing beside the black thing(sd card?) and it shuts down. Holding the power button to start it takes it first to the Sony text, then some more Sony text, but after that it gets stuck in the wave animation. Another thing to note is that I was using about 90% of it's storage so was thinking this is a reason.
Anyone know of a fix?
I'm open to installing a custom ROM or factory resetting it, don't really have anything important that I want to recover, just want to turn it into something usable again.
A link to one of these guides would be helpful.
When plugging it into PC via USB I cannot get it to show up in xperia Companion. It does show up in Devices I think, but I can't use it for anything.