I know there are other threads that have this in it but the threads are about rooting...not this problem so I figured I would make a thread for this.
Anyways...I rooted my obsidian 3 weeks ago with king root and it actually completed. Awesome right? So a week or so ago i had a message that there was a system update to install downloaded and ready to install. I figured it wouldn't be a good idea to do that since it was rooted so i turned that notification off and figured that was it. Well my girlfriend thinking she was doing a favor ended up installing it a few days later. it rebooted into the stock recovery and installed to 30% then said error and rebooted again. Now it's in a bootloop that starts at the ZTE Logo, then Tmobile logo, then reboot. Every few reboots it goes past the Tmobile logo and shows the toast message saying
"Android is upgrading
Optimizing app 1 of 127"
when it does this it usually stops at 19 of 127 and a few times has gone up to 32 of 127.
I'm trying to use the SP Flash Tool and a backup someone posted to re-flash it but i cant even get the phone to use the MTK USB VCOM driver either.
What i want to know is am I on the right path? Anyone have any suggestions. Any input and help would be welcome and appreciated.
I am having the SAME EXACT PROBLEM. I have searched EVERYWHERE and I cannot find an answer. If you find one can you please tell me and if I find one I will help you as well.
Thanks,
Nick
mad.dna said:
I am having the SAME EXACT PROBLEM. I have searched EVERYWHERE and I cannot find an answer. If you find one can you please tell me and if I find one I will help you as well.
Thanks,
Nick
Click to expand...
Click to collapse
I did get a bit further but I'm stuck now. To get the drivers to work you have to press "Download" button in the flash tool, then hold the volume up button and plug the USB in the phone. It should make the connect noise and the drivers will show in Device Manger. But then I get another error message saying i need some authentication file. I cant give much more details because I don't have that computer in front of me and I might have to redownload the flash tool and pull it up again.
My phone have the same problem after I rooted, I called Tmobile and they connect me to ZTE and ZTE create a RMA number (service number) and they sent me an email to their service web site, enter that number and your email it will send you the instructions and address to send your phone to their service center to fix it within 2 weeks, my phone is back to normal now, they just reload the software in the phone. ZTE Obsidian Z820 just released on September 2015, so it is still in 1 year guaranty period, they asked for a receipt for the phone but I said I don't have a receipt and they still agreed to fix it.
i have this problem too.... my phone isnt even rooted. but now its stuck on a boot loop and i was wondering if i can update my phones software via SD card (that option from the recovery start up menu). If so, where would i go to put all the files i need on my SD card? plz help D:
my email is: invalid323 (at symbol) yahoo (period) com
lowdown1983 said:
I did get a bit further but I'm stuck now. To get the drivers to work you have to press "Download" button in the flash tool, then hold the volume up button and plug the USB in the phone. It should make the connect noise and the drivers will show in Device Manger. But then I get another error message saying i need some authentication file. I cant give much more details because I don't have that computer in front of me and I might have to redownload the flash tool and pull it up again.
Click to expand...
Click to collapse
Can you share a link to the firmware you are trying to load via flashtool?
BootLoop
Anyone solved this error?
Full forum have this problem
Repair imposible!!!
linh7571 said:
My phone have the same problem after I rooted, I called Tmobile and they connect me to ZTE and ZTE create a RMA number (service number) and they sent me an email to their service web site, enter that number and your email it will send you the instructions and address to send your phone to their service center to fix it within 2 weeks, my phone is back to normal now, they just reload the software in the phone. ZTE Obsidian Z820 just released on September 2015, so it is still in 1 year guaranty period, they asked for a receipt for the phone but I said I don't have a receipt and they still agreed to fix it.
Click to expand...
Click to collapse
Sorry my english is not very good, but you have your zte z820 well so you can give me a backup. please :crying::crying:
JRdavis said:
Sorry my english is not very good, but you have your zte z820 well so you can give me a backup. please :crying::crying:
Click to expand...
Click to collapse
I do not think I answered you he wrote a long time ago and I have the same problem.
no creo que te conteste el escribió hace mucho y tengo el mismo problema.
HELP ME PLIS
AYUDENME :crying:
Nynorsk said:
i have this problem too.... my phone isnt even rooted. but now its stuck on a boot loop and i was wondering if i can update my phones software via SD card (that option from the recovery start up menu). If so, where would i go to put all the files i need on my SD card? plz help D:
my email is: invalid323 (at symbol) yahoo (period) com
Click to expand...
Click to collapse
SD Card ROM use this one.
https://drive.google.com/uc?id=0ByQqd_psFzvxUFk4Zy1OZVVxNGM&export=download
To Update just rename file to update.zip
Good Luck
---------- Post added at 06:48 PM ---------- Previous post was at 06:41 PM ----------
kevin14XD said:
I do not think I answered you he wrote a long time ago and I have the same problem.
no creo que te conteste el escribió hace mucho y tengo el mismo problema.
HELP ME PLIS
AYUDENME :crying:
Click to expand...
Click to collapse
Here you have I think backup of phone
https://drive.google.com/uc?id=0ByQqd_psFzvxMFptMUtrV1Y3d0U&export=download
Password : dvaldezcelular
Credit for files : gsmhosting GSM KPK
Here are the roms that everyone is looking for
drive.google.com/open?id=1Pk-Duhdt0svif8YYLY8NYk6tOG-bRL2k
Related
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
leinad1313 said:
I wanted to install the ClockworkMod and have inadvertently selected the wrong then the phone had been Hongen and now it will not boot, only a black screen and no recovery mode can any help myyyyyyyyyy ?
Click to expand...
Click to collapse
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Try this: http://forum.xda-developers.com/showpost.php?p=36688645&postcount=808
PS.: If you can't get your phone in emergency mode (step 5) you can put in download mode instead. To get it in download mode press and hold volume down and up while you connect your usb cable to your pc
the phone does not go into any recovery mode (emergency) indeed, the PC recognizes it as USB\VID_05C6&PID_9008&REV_0000
Yet another brick. There should be a counter for this.
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
same problem
mejinn said:
How do I reset the counter?
the samsung is reset with a simple jig... and lg phones?
Click to expand...
Click to collapse
I have the same problem... any idea?
thanks
mejinn said:
I have had the same thing by the same procedure to unlock bootloader and flash cwm ... :crying: :crying: :crying: help us
Click to expand...
Click to collapse
same problem ... on l7 ( does anyone unbrick his phone?
Flash the stock firmware
Sent from my LG-P880 using xda premium
No solution to this problem
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
---------- Post added at 04:02 PM ---------- Previous post was at 03:46 PM ----------
breakercris said:
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts:cyclops:
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
Click to expand...
Click to collapse
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice:crying::crying::crying::crying::crying:
Sony st23i
Same chases with me, on my phone sony st23i, please help me, can anybody give me link for this chases???
hi
my phone is bricked and as i unlocked the bl moto voids the warranty.
i need help if someone is ready to do the following:
Get an external MicroSD card with “exfat” system file, and the size of this SD card should be larger than 16 GB, which is the size of the whole partition.
Do a complete factory reset on the phone. If a custom recovery is installed, use it to wipe data, cache, and internal storage.
While the sdcard is in the phone, run the follow commands via adb
adb shell
su
dd if=/dev/block/mmcblk0 of=/storage/sdcard1/backup.img bs=512 count=30535646
The size of the backup.img is around 16 GB, However, if compressed would be about 2 GB
then upload the emmc image so i might have a chance to unbrick
using hdd raw copy tool
UPDATE 2017-feb-02:
moto replaced my unit
You should be more clear in what's your problem, what your situation and what you would try to do...
it's hard brick
no screen on
detected by computer as com port:
qualcomm hs-usb qdloader 9008
meaning u can only access it as described here:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
or here:http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
reiteravi said:
it's hard brick
no screen on
detected by computer as com port:
qualcomm hs-usb qdloader 9008
meaning u can only access it as described here:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
or here:http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Click to expand...
Click to collapse
Oh man... How this could be happened exactly?
Anyway, instructions you provided could be right (I know quite all programs involved...), only some notes:
- it's better to use a just formatted PC to do the work (and be ready to reformat eventually). Use Windows 7 64 bit and Administrator user to have no hassle...
- it's not really needed to factory reset phone before backup command... Problem is that if someone don't, you'll restore all his private data too...
- external SD is not really needed as ext4... Even exFAT would be fine (only problem is the 4GB limit of FAT32). exFAT is even better because it could be read on Windows PC too (by who will send it to you...), while ext4 requires linux PC or some software on Windows...
Said that, I really can't, but there are A LOT of user here that are testing some firmware every day (read: e.g. testing for @janjan ) that can help you for sure... Stock software isn't really needed to unbrick: only a rooted working one is enough...
Good luck bro'...
thanks
data is no problem as u cannot access it anyway..
what i remeber is that i flashed retcn nougat
it booted and even id:n/a was reolaced with real id number
then wanted the us version so fastbooted verison system files
then rebooted to this brick
reiteravi said:
thanks
...then wanted the us version...
Click to expand...
Click to collapse
Same thing here... , please share if you solved it.
I took my moto to motocare, hopefully they can repair it or maybe apply warranty (finger crossed)
is your bl unlocked ?
plz report if they honor warranty
reiteravi said:
is your bl unlocked ?
plz report if they honor warranty
Click to expand...
Click to collapse
Yep BL unlocked, I know that unlocking it voids warranty but hope they do something :fingers-crossed:
Pal, put a short request and a link to this help thread in this discussion: http://forum.xda-developers.com/moto-z/development/twrp-ported-to-moto-z-eu-version-t3470920
There should be some people that could easily help there...
:good:
posted there
thanks
Lepezon
plz report how moto responded as i purchased mine in the uk
so sending there and back would cost some tens
would be nice to know i don't send it for nothing
reiteravi said:
it's hard brick
no screen on
detected by computer as com port:
qualcomm hs-usb qdloader 9008
meaning u can only access it as described here:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
or here:http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Click to expand...
Click to collapse
Did you followed these steps described in above links. I can take a look if you are close to my country Denmark. Can you boot in bootloader mod? Did you look at RSD ? Many possibilities there but difficult to help someone without the device. Hopefully you can solve your problem.
reiteravi said:
:good:
posted there
thanks
Lepezon
plz report how moto responded as i purchased mine in the uk
so sending there and back would cost some tens
would be nice to know i don't send it for nothing
Click to expand...
Click to collapse
Are you sure that's how it works, cause mine is also from UK, but I live in Poland, and the idea of sending it to the other side of the continent if something happens sound kind of silly to me, I mean, can't they just let you ship it to your closest Motorola service
no
i contacted mot us and they only deal with us units
had to contact moto uk
janjan
this brick means no screen
no bootloader or recovery mode
not fastboot or adb
only com port via qualcomm utility
reiteravi said:
:good:
posted there
thanks
Lepezon
plz report how moto responded as i purchased mine in the uk
so sending there and back would cost some tens
would be nice to know i don't send it for nothing
Click to expand...
Click to collapse
Yep I'll report
---------- Post added at 05:53 PM ---------- Previous post was at 05:09 PM ----------
Good news ! MOBO collaborates with Motorola here in mexico on repairing devices, I took my device to them and left it there for a couple of days. Today I phoned them to see the status, IT'S REPAIRED! :highfive:
thanks
will send it to moto then
hope uk are ok as mex
Is this issue resolved? If not may be I can assist you fix this issue. I too went through same steps.
it's not resolved
if u succeeded plz give some info how
i got sahara fail every time
Ok... You need to manually flash using fastboot command the firmware xt1650.246.45 (search blog you will find it, I can't remember link right now). Ignore any error messages while flashing.
After flashing, boot to recovery (stock recovery that was flashed manually earlier). Choose update from ADB, now sideload nougat firmware. After completion again boot to recovery and clear cache. Now you are done.
But your bootloader must be unlocked for this.
Thanks.
u missed big time
had i got any fastboot access then it was not bricked
unless u have found a way to fastboot in "qualcomm 9008 mode"
Hi guys!
I think I did something stupid while updating my XT1650-03 to Nougat.
What I did was manually flash stock nougat ROM (retbr) through fastboot, following the instructions within flashfile.xml, but, as I've read some bad things about the updated bootloader I stupidly decided not to flash it. The result is that it won't power up, even though I've tried: pressing power+vol. down; power; plugging the charger; fastboot commmands ( I was hoping it was just the screen that was off); to no avail.
I've noticed that when I plug the usb cable to the computer it plays that sound of connected devices.
Any suggestions? I'm probably going to have to take my device to authorised repair (off warranty, I know), but they usually take weeks to fix anything, so you guys are my best bet for now.
Thanks in advance!
martonto said:
Hi guys!
I think I did something stupid while updating my XT1650-03 to Nougat.
What I did was manually flash stock nougat ROM (retbr) through fastboot, following the instructions within flashfile.xml, but, as I've read some bad things about the updated bootloader I stupidly decided not to flash it. The result is that it won't power up, even though I've tried: pressing power+vol. down; power; plugging the charger; fastboot commmands ( I was hoping it was just the screen that was off); to no avail.
I've noticed that when I plug the usb cable to the computer it plays that sound of connected devices.
Any suggestions? I'm probably going to have to take my device to authorised repair (off warranty, I know), but they usually take weeks to fix anything, so you guys are my best bet for now.
Thanks in advance!
Click to expand...
Click to collapse
Don't even bother going to the service center. The same happened with my device and they refused to give me the warranty. Motorola voids it the moment you get the unlock code. So my device was dead for 3 months. And I fixed it few days back. The good news is that your PC is detecting the device.
I will post the solution with a new thread in few minutes.
Manish54 said:
Don't even bother going to the service center. The same happened with my device and they refused to give me the warranty. Motorola voids it the moment you get the unlock code. So my device was dead for 3 months. And I fixed it few days back. The good news is that your PC is detecting the device.
I will post the solution with a new thread in few minutes.
Click to expand...
Click to collapse
Thank you so much for your reply, it's very much appreciated! I didn't think anyone would reply that soon
I'll wait for your thread!
There ya go
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
So, I'm totally lost.
As I posted in the thread above, even though Manish54 has been very kind to help, that solution did not work for me, so I've been trying to find another way. The thing is, this issue is beyond my comprehension. I'm not new to flashing and stuff, but I am new to moto Z. I understand that I should've been more careful and also have read a bit more before starting to mess with a new device, so feel free to judge me .
For instance, I don't know what fsg.mbm, adspso.bin, BTFM.bin and oem.img are for, since my old phone didn't have those (or at least I didn't need to mess with those), and I also don't know it they're relevant to my problem. If anyone could point me to some info on that, it'd be greatly helpfull.
Besides that, I've found mentions to tools like qualcomm's BoardDiag and QPST QFIL, but I'm not really sure if they apply for my situation, or even if I can manage to adapt the guides I've found to work on the Moto Z.
Any help is very much appreciated!
Thank you!
Solved!
I managed to unbrick my phone.
If anyone needs it, the details are in the thread made by Manish54.
https://forum.xda-developers.com/mo...rick-moto-z-hardbricked-t3590133#post71876064
Is there any way to solve it ?
Hillterpty said:
Is there any way to solve it ?
Click to expand...
Click to collapse
Did you even read the posts?
Ajuda
martonto said:
I managed to unbrick my phone.
If anyone needs it, the details are in the thread made by Manish54.
https://forum.xda-developers.com/mo...rick-moto-z-hardbricked-t3590133#post71876064
Click to expand...
Click to collapse
Amigo tb estou com o meu morto, me ajuda, qual o modelo do seu.
https://uploaddeimagens.com.br/imagens/sem_titulo-jpg--9130
hard brick moto z
Manish54 said:
There ya go
https://forum.xda-developers.com/moto-z/how-to/guide-how-to-unbrick-moto-z-hardbricked-t3590133
Click to expand...
Click to collapse
hello friends, I'm with hard brick on the moto z xt1650-3
due to an update via ota, when my bootloader was unlocked I was in the android oreo (8.0), however I went back to 7.0, due to an update via ota, the device did not call anymore, I tried several blankflash and nothing, I am very annoyed at this, thinking of dropping my hand, I took some assists nobody can solve, I hope someone here can help me, at least inform me something that is useful to recover my cell phone.
my cell phone is still recognized as "qualcomm hs-usb qdloader 9008 (com3)
please join the telegram group:
https://t.me/motozz
Hey, my phone was dead two (brazilian xt1650-03), i spent three days struggling until i could bring him back. Thanks to the help in this forum. Your phone probably has the latest update opls27-76-51-7-july, so it must work:
first, you have to bankflash it with blankflash_OPL_27.76-51, its in the 30+ page topic tutorial here in this forum. Very important, must be in windows 7 or 8, with usb2.0
second, use this rom opls27-76-51-7-july-moto-z. it must work because its the last one. Its not brazilian, evething works fine but the netflix app didnt , but hey, at least our phone is alive again.
The secret is in the version of the firmware instaled before the brick, it must be the rom installed or latest to work
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.
justinfinity09 said:
Hello. I have flashed my Lenovo Vibe K5, former build A6020a40_S004 to A6020a40_105, hoping for that VoLTE update. Following the proper steps and downloading the Stock ROM Firmware from trusted supplier, my phone won't boot into anything: recovery, or normal. Though the LED lights up when connected to a computer. However, it doesn't appear on my computer or hear that USB chime. I'm using a Windows 10 (which I've seen many have issues with Windows 10 and drivers) running on Bootcamp 6. I appreciate it if you guys could help me. Thank you very much.
By the way, I have no custom recovery installed. Just the basic Android System Recovery <3e> and I'm not that familiar with Android systems.[/Q
Click to expand...
Click to collapse
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Brawler leon said:
Well sorry to hear about that but I know very well how to recover from such situation. You'll need to flash the recovery IMG again so that it boots into recovery mode
Click to expand...
Click to collapse
Thanks! Can you tell me how? I've been researching about this as well for a long time now. Any help is appreciated.
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
---------- Post added at 05:30 PM ---------- Previous post was at 05:22 PM ----------
Just keep replying if it works and within a week you'll get your phone fully functional.
Here I have uploaded the platform tools needs d to flash recovery
Brawler leon said:
Here I have uploaded the platform tools needs d to flash recovery
Click to expand...
Click to collapse
Thanks a lot, man. Where the hell have you been all my life? Lol.
So my phone doesn't boot. It doesn't even show the Lenovo logo on it. Just mere darkness. :'(
I am going to Hong Kong later this week (this is where I bought the phone) and I don't know, maybe have someone fix it.
PS. Can you please DM me the links or if it isn't a loss for you you may just reply it here.
Thanks in advance and more power. The world needs more people like you.
Sincerely,
Justin
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Brawler leon said:
Sorry for responding late bud.but I am not able to post the link on this thread. If you have any e mail address then tell me so that I can mail you the links. And as you said your phone doesn't boot I want to ask you whether your phone charges when you connect it to the power and charging bar is shown or not. If yes then pls remove your phone battery and put it back and press the power button and the vol. down button hardly .if you see lenovo logo and something written in Chinese or something like that then you're on the way to get your phone back.just reply me the results soon bud
Click to expand...
Click to collapse
Hey man. Justin here, again.
You may reach me through "[email protected]".
It doesn't show anything. Though, the LED light illuminates when connected to a power source or laptop. I'm starting to think it's absolutely hopeless. But please do message me anyway.
Fondly,
Justin
I think you have hard bricked your phone but still let's try
Brawler leon said:
I think you have hard bricked your phone but still let's try
Click to expand...
Click to collapse
Sure. I will wait for you in my e-mail. Thanks!
Brawler leon said:
Yes my bud. I will provide you the link shortly to some SDK tools so that you can flash your recovery IMG again and et access to recovery mode. I know that situation is chaotic and sucks but I am assuming that you aren't able to access twrp or anything.when you turn the phone on it gets stuck at lenovo and after few minutes it gets restarted on its own. And on connection g it to computer, it just doesn't get connected and nothing appears to be connected. I want you to take the battery out and place it again after few minutes and press the "vol down" button and "power button at the same time. You'll see the same lenovo icon but there will be something written in Chinese or something like that. Now connect your phone to your computer and I advise you to use a very good quality data sharing cable or original lenovo cable. Now your computer will recognise your phone as a hard drive or a storage device.i I'll try to upload a video on that too. Till then try these steps and lemme know if they work and your computer recognises your dead phone.if it does then there is still a hope left. BTW I was stuck in the same situation twice but thank god I saved myself and I am using my device. Note:- this method doesn't uses any software like " QFIL" or "QCOM" loader to flash stock firmware. Hope it works
Tried removing battery, its still in bootloop.
Click to expand...
Click to collapse
need help! I tried to root my samsung galaxy a10s phone (SM-A107M). went wrong now my device has hard brick ...
can someone help me with debrick.img? to save my device ?! thank you very much
Can you boot into download mode? If you can then you can flash a full firmware with Odin.
muhammad42620 said:
Can you boot into download mode? If you can then you can flash a full firmware with Odin.
Click to expand...
Click to collapse
No, it won't start, keep the black screen ... add me on telegram @danilobrother
Gabas143514 said:
No, it won't start, keep the black screen ... add me on telegram @danilobrother
Click to expand...
Click to collapse
Or just talk about it here since your solution may be useful to others as well.
okay! so I rooted my Samsung galaxy a10s SM-A107M, when I went to install the magisk-manager apk, my phone just turned off by itself. I took an assistance, they reported that the internal memory was corrupted, then I watched some tutorials, but I found some solutions, but I did not find exactly for the model of my cell phone, I believe that my device is with HardBrick, when I connect to the computer it is disconnected and connecting, so my cell phone can't connect, I need the unbrick file to put in the micro SD and try to restart, to see if my problem is solved ... I see a lot of reports from users with the same problem, it would be very gratifying to be able help me.
what is the point of this section if mods wont help ?
Gabas143514 said:
okay! so I rooted my Samsung galaxy a10s SM-A107M, when I went to install the magisk-manager apk, my phone just turned off by itself. I took an assistance, they reported that the internal memory was corrupted, then I watched some tutorials, but I found some solutions, but I did not find exactly for the model of my cell phone, I believe that my device is with HardBrick, when I connect to the computer it is disconnected and connecting, so my cell phone can't connect, I need the unbrick file to put in the micro SD and try to restart, to see if my problem is solved ... I see a lot of reports from users with the same problem, it would be very gratifying to be able help me.
Click to expand...
Click to collapse
Same problem here. I have second device which is working perfectly, if someone have solution how to create scatter file or something with working device please post an update.
rberet said:
Mesmo problema aqui. Eu tenho um segundo dispositivo que está funcionando perfeitamente, se alguém tiver solução como criar arquivo scatter ou algo com dispositivo funcionando por favor poste uma atualização.
Click to expand...
Click to collapse
did you manage to solve?
That's very similar to my issue execpt I tried to install TWRP.
Gabas143514 said:
need help! I tried to root my samsung galaxy a10s phone (SM-A107M). went wrong now my device has hard brick ...
can someone help me with debrick.img? to save my device ?! thank you very much
Click to expand...
Click to collapse
Badger50 said:
Or just talk about it here since your solution may be useful to others as well.
Click to expand...
Click to collapse
ConcernedGuy120 said:
That's very similar to my issue execpt I tried to install TWRP.
Click to expand...
Click to collapse
Je4n.vito said:
did you manage to solve?
Click to expand...
Click to collapse
rberet said:
Same problem here. I have second device which is working perfectly, if someone have solution how to create scatter file or something with working device please post an update.
Click to expand...
Click to collapse
Hi! I just made a tutorial for unbrick this device, cuz i also bricked my A10s.
[GUIDE][SM-A107][MTK6765] Unbrick your Samsung Galaxy A10s - Stuck on a black screen, recognized as Preloader USB VCOM and cycling rebooting
Hi, yesterday I bricked my Galaxy A10s by flashing a custom recovery by Odin (The phone doesn't enter in Download or recovery modes, it just does nothing): Immediately I started looking for how to fix it, and after a lot of research, here is how...
forum.xda-developers.com