i have infinix zero 3 .i flashed stock firmware by flash tools by misktake i choose format + download option .i lost my imei num.i try every method to write imei permanently but i fail.. it give error in meta mode .(when mobile is in meta mode ) says no response from other write (error given by sn write tools, ) chip in zero 3 is mt6795 .. anyone hrlp me how can i restore my imei permanently
asdafasdas said:
i have infinix zero 3 .i flashed stock firmware by flash tools by misktake i choose format + download option .i lost my imei num.i try every method to write imei permanently but i fail.. it give error in meta mode .(when mobile is in meta mode ) says no response from other write (error given by sn write tools, ) chip in zero 3 is mt6795 .. anyone hrlp me how can i restore my imei permanently
Click to expand...
Click to collapse
Try ...using mobile uncle tools...it might work for you if not sp flash is your only alternative
Related
Please, can anyone upload nvram.bin of MT6572 for SP Flash Tool.
The reason why I need it is mentioned in the following post:
http://forum.xda-developers.com/showthread.php?p=49706111
threatalive said:
Please, can anyone upload nvram.bin of MT6572 for SP Flash Tool.
The reason why I need it is mentioned in the following post:
http://forum.xda-developers.com/showthread.php?p=49706111
Click to expand...
Click to collapse
Using some others nvram(means you are using their imei) so it is illegal. There are ways to get your imei. First install rom in sp tools then use sn tools or go into engineering mode and write your imei that's it
If you write with engineering mode it is temporary which will go upon factory reset but If you write with sn tools it is permanent and you must have installed vcom drivers and cdc drivers in pc to write with sn tools
Sent from my GT-I9070 using Tapatalk
PradeepMurugan said:
Using some others nvram(means you are using their imei) so it is illegal. There are ways to get your imei. First install rom in sp tools then use sn tools or go into engineering mode and write your imei that's it
If you write with engineering mode it is temporary which will go upon factory reset but If you write with sn tools it is permanent and you must have installed vcom drivers and cdc drivers in pc to write with sn tools
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I have explained on the link given in my first post that I formatted NVRAM of my phone.
So right now it has no baseband/radio files, and without them SN Tools etc. don't work.
Until I flash these baseband/radio, I can't repair IMEI in any way.
So if someone can provide me with MT6572 nvram.bin, I would flash it and then modify IMEI with SN Tools.
How to load nvram.bin?
I have oposite problem , i have working CWM backup of 4.2.2 from my cubot X6, and working readback from flashtool (my nvram.bin included), when i loaded 4.4.2 i lost IMEIs and nvram warning error in wifi.
SN IMEI writer in meta mode working only for IMEIs , not for MAC adress for me.
So when i have my own working nvram.bin from 4.2.2 , how can i load it in 4.4.2?
Basicly loaded a dual sim rom on a single sim Acer Liquid Z200.
was helped so far in this thread: http://forum.xda-developers.com/and...ms-cwm-root-acer-liquid-t2960787/post59482099 by @Shreps, but somehow i got this message that due to the 10 post rule i wasnt able to post anymore.
Downloaded the last zip file, but CMW doesnt seem to recognize my SD card.
Tried to load the rom with adb using sideload, but get the message cant find device.
Is it possible to load another version of CMW, mount it with USB and flash the zip file from the pc? And can i use any CMW file or are the custom made for each type of phone/brand?
Any other suggestions, got no clue what to do now
edit 18-3-15:
Tried to re-load CWM with Smart Phone Flash Tool and got this PMT changed for the ROM; it must be downloaded
Update:
Did a format of the device using Flash Tool, MTK USB poort was loaded and was able to flash the ROM for dual SIM.
@stef951
Try to flash this firmware from a Recovery :
update-Acer_AV0K0_Z200_1.012.00_EMEA_GEN1S-sds.zip
It's the stock firmware Single SIM EMEA GEN1s, you should back to your original firmware.
Click to expand...
Click to collapse
used recovery to install the firmware for sinlge SIM.
However now stuck with IMEI issues.
Used Mobile Uncle Tool and MTK Engineering to get into Engineering mode, but get this message: "cannot find engineer mode app"
*#*#3646633#*#* doesnt do anything. Possible that Engineer mode isnt installed? And is it possible to install it on my device?
Tried to load IMEI with MTK droid gave me a message "Changes will come into force after reset", but nothing changed -_-
Any other options on this IMEI matter.....?
Finally found a solution to enter Engineering mode, type *#*#2237332846633#*#*
When i try to change the IMEI with AT commad get a message AT command is failed to send
Tried Uncle tools, but unaible to acces engineering mode with this app.
I can enter a valid IMEI in MTK tools, but after reboot its still unknown.
Tried to copy a new MP0B_001 file to the NVD_IMEI folder
but all failed :crying:
Still searching for the solution, but if someone over here can help me out it would be appreciated.
Phone is not reading SIM card neither, is this because of the IMEI issue?
Acer Z200 Working again!!!
GOT MY PHONE BACK TO LIFE!!!
Lost the serial number and IMEI, had to write them back to NVRAM using Maui META tool.
Tutorial how to found on http://www.gizbeat.com/6058/how-to-...-for-mtk6582-mtk6572-mtk6592-mtk6589-mtk6595/
In the attached ZIP the files i used for the Maui META tool
Android_Gadget_CDC_driver, CDC driver didnt got installed so had to do this manually.
MTK6572 database: BPLGUInfoCustomAppSrcP_MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V1_P3_1_wg_n
If you have the serial and IMEI number, go to method B under Restoring Values and add the manaully.
When loading the MTK6572 database i also got a warning: execution warning nvram database file is inconsistent with target load
Ignored the warning and just writed the serial and IMEI to the device.
Disconnected, rebooted and got a working serial and IMEI.
So happy that the damn thing got working again.
bro I saw your successful post about Acer Z200. but I can't install CDC Serial Driver .
. how to Install Manually ? Android_Gadget_CDC_driver, CDC driver.
Can you explain to me.
Thanks in advanced
Sir I downgrade my Lenovo a7000 to marshmallow to lollipop with sp flash tool with original stock rom and by mistake I select format and install in so flash tool and software install successfully but my imei number , serial never is deleted so I root my phone and re write my imei number again but when I format or reset my phone my imei number deleted again ..
I tried many method for fixing my issue permanently but all fail like imei number writer tool , my droid , meta tool but it's all not working even I install all driver too but still is does not show mobile ..
I think I facing low network issue too after my imei number problem.
Please give solution..
i flashed stockrom of my acer Z530 using sp flashtool.my imei is missing since then.i restored imei using mobile uncle tool after rooting. i cant update my phone after it.i tried several tools such as sn write tool and maui meta 3g . it didn't work for me says "apmetamode enter fail".is anyone have solution here?.
There are only 2 allowed ways.
1. Flash a stock rom (this doesn't always work)
2. Send it to be repaired.
Editing the IMEI is illegal in many places and as such all talks about doing it are banned
Can you go in to recovery mod now
It is rom on acer wed side
Hello, i'have redmi note 9 (merlin).
I had brick my phone with MTK (all data deleted).
But actually i'have flash my phone with stock rom (android 11, miui 12.5.4) and i root this (magisk) and it work!
But my MEI code not are in my phone
no IMEI = no sms, no 4g, ...
How to write my old IMEI code on my phone ?
(I still have the phone box, so I know the old code)
Thanks in advance <3
(i'm french, sorry for my spelling)
Changing or repairing an IMEI code is considered illegal in some countries/regions. But, if you still have a box as you said, you can search online on how to repair the deleted IMEI number. Losing an IMEI is rare and occurs if you've done something to the critical partitions.
Also, could you see any signal on your phone before rooting it with magisk? Or, was it gone right after the main flash?
Mineplayerminer said:
Changing or repairing an IMEI code is considered illegal in some countries/regions. But, if you still have a box as you said, you can search online on how to repair the deleted IMEI number. Losing an IMEI is rare and occurs if you've done something to the critical partitions.
Also, could you see any signal on your phone before rooting it with magisk? Or, was it gone right after the main flash?
Click to expand...
Click to collapse
My IMEI has deleted after repair my phone with SP Flash Tool.
It's good ! I have write my IMEI on my phone.
I use MTK META Utility (for run phone on "META MODE")
and i use Modem META for write IMEI
My problem is solved!
Loyerss said:
It's good ! I have write my IMEI on my phone.
I use MTK META Utility (for run phone on "META MODE")
and i use Modem META for write IMEI
My problem is solved!
Click to expand...
Click to collapse
can you give ne guide bro?
Loyerss said:
It's good ! I have write my IMEI on my phone.
I use MTK META Utility (for run phone on "META MODE")
and i use Modem META for write IMEI
My problem is solved!
Click to expand...
Click to collapse
PLEASE TELL WHICH FILE FROM WHERE TO DOWNLOAD AND WHAT ARE THE STEPS????