So i got this lovely update from Verizon. I rooted using the one touch but never made any changes to the phone. Still using default UI etc. Just rooted to access saves, overclocking.
So the update reboots the phone, starts installing, and fails. Then i can go to the menu and reboot the phone. It will come all the way on, and immediately just shuts down and tried the update again. Stuck in this vicious cycle. Help?
Mount the SD card either in recovery or on a PC and see if there is a PG05IMG.zip on it. Remove it if so, then reboot.
tqhx said:
So i got this lovely update from Verizon. I rooted using the one touch but never made any changes to the phone. Still using default UI etc. Just rooted to access saves, overclocking.
So the update reboots the phone, starts installing, and fails. Then i can go to the menu and reboot the phone. It will come all the way on, and immediately just shuts down and tried the update again. Stuck in this vicious cycle. Help?
Click to expand...
Click to collapse
You can't install an OTA if your rooted, even if you haven't made any changes. The problem is the custom recovery (e.g. ClockworkMod)
When the update tries to install the updated recovery, it sees that the old stock recovery isn't there, and fails.
As far as recovering from that, I'm not entirely sure.
Seeing as you used the one touch root, I doubt you installed the S-Off eng bootloader. Try what the above poster suggested first.
Thanks for the replies guys. I did have s-off, but yeah ill tell you i tried what he suggested with no luck.
I ended up being ok i made another clockwork backup, did a full restore from a backup before the date of the update, then did just a data restore from the backup i had just made. Phone is back to normal. Thanks for the responses, ill give you both marks for being helpful
I'm in the same boat, except I was silly enough to not have a backup made. I do not see the PG05IMG.zip from recovery. Any other possible ways to fix this? If I have to clear all my data and start again, I'm ok with that though I'd obviously prefer not to do that.
Boot into clockwork recovery and wipe cache only.
Sent from my HTC Thunderbolt
This same issue has happened to me with the Verizon update. Long story on how it i clicked okay to the update. I told it reject at least 3 times already.
Anyway - i was stuck in this nasty reboot cycle. I was lucky to have a backup from March when I first rooted my TB. Not having a more recent backup is my bad.
So I have worked most of today with near factory settings from my recovered backup and now I am restoring todays backup to see if I can fix this reboot BS.
I did the Wipe Cache from ClockMod and when the phone rebooted it gave the prompt to reinstall the update which I cancelled. So success!!! Now I can clean up my junk apps and do a proper backup to protect myself in the future.
Hey guys, last night my s3 ran out of battery while I was sleeping. I woke up to charge it and turn it on although it's just stuck on boot loop now. Any ideas? I don't really want to have to restore it through clockwork recovery if I can avoid it.. any ideas?
Running CyanogenMod 10
Recovery and wipe caches .
jje
Thanks for your reply. Wiping the cache hasn't seemed to have done anything, any more suggestions?
well, try formatting system and reflashing
Thank you, just need to re root, re flash and restore from backup now.
I'm having a similar issue. Last night my S3 ran out of battery and it went off. I tried to power it on again, and it started to show the boot logo. But it went off again because there was no battery. I changed the battery and now I have a bootloop. I made a backup, and then I started trying solutions. The only one that works is wiping data/factory reset. And then, if I restore ONLY the data partition from the backup the boot loop comes back. So whatever it is, is on the data partition. But how to diagnose it or solve it? I don't wanna lose my apps or their configuration!!
Any help??
eXtremeDevil said:
I'm having a similar issue. Last night my S3 ran out of battery and it went off. I tried to power it on again, and it started to show the boot logo. But it went off again because there was no battery. I changed the battery and now I have a bootloop. I made a backup, and then I started trying solutions. The only one that works is wiping data/factory reset. And then, if I restore ONLY the data partition from the backup the boot loop comes back. So whatever it is, is on the data partition. But how to diagnose it or solve it? I don't wanna lose my apps or their configuration!!
Any help??
Click to expand...
Click to collapse
Well done for searching but this thread is from last year so a better option would of been to start a new one and linked to this one in your post saying what you have done.
If the phone turns off do to a empty battery there's a chance it can corrupt files. This is what this sounds like, no option to clean install.
Thanks for the info, I ended up using a backup.
Hey All,
I've upgraded my 925F to Official MM 6.0.1. Rooted it through kernel Xspace and then installed recovery TWRP_3.0_MM_S6_by_ManhIT
My only concern is when I'm in TWRP I can't reboot, it just freezes.
I can nandroid backup no problem just the reboot part freezes TWRP.
Anyone else had this problem? is there another TWRP to be used?
nb : I tried clearing cache + dalvik, freezes still happen before rebooting.
thanks for ur help.
kaemon said:
Hey All,
I've upgraded my 925F to Official MM 6.0.1. Rooted it through kernel Xspace and then installed recovery TWRP_3.0_MM_S6_by_ManhIT
My only concern is when I'm in TWRP I can't reboot, it just freezes.
I can nandroid backup no problem just the reboot part freezes TWRP.
Anyone else had this problem? is there another TWRP to be used?
nb : I tried clearing cache + dalvik, freezes still happen before rebooting.
thanks for ur help.
Click to expand...
Click to collapse
Try this TWRP form arter... this is the only TWRP being use by many of us here.. you flash it through odin or recovery...
I had the same problem and i solved changing my kernel
Inviato dal mio SM-G925F utilizzando Tapatalk
fabiok81 said:
I had the same problem and i solved changing my kernel
Inviato dal mio SM-G925F utilizzando Tapatalk
Click to expand...
Click to collapse
The issue is not the kernel... its the recovery that doesn't work when reboot to system is touch and is freezing..
Go to advance then terminal
Write reboot
Easy!
Yes i know the iusse is about the recovery but it seems because there is not compatibility between some recovery and some kernel. I tried various recovery 3.0 and i have always a kind of freeze. The TWRP... by Manhit for example gave me freeze with xspace kernel but not with hacker kernel. I don't no the reason....
Inviato dal mio SM-G925F utilizzando Tapatalk
same but different
Hi All,
I'm experiencing a freeze in TWRP after about a few seconds, the whole recovery stands still and this happens every time.
I flashed the Xspace kernel which hasn't help.
The TWRP from arter97 works great, except it doesn't allow me to copy files to my PC using MTP, message says unexpected error.
yet, the ManhIT and Original TWRP allow me to copy data but both of them freeze up after a few seconds which causing the copying to fail.
Reasons I'm doing this is because my SM-G925F start looping and I've tried flashing stock so many times to no avail.
I'm sure all i need to do is data/ factory wipe and my phone will boot fine, I just really need some data before I do that.
Is there perhaps a different kernel I can try?
or if anyone has any suggestions that would be very much appreciated.
Regards
wahwahward said:
Hi All,
I'm experiencing a freeze in TWRP after about a few seconds, the whole recovery stands still and this happens every time.
I flashed the Xspace kernel which hasn't help.
The TWRP from arter97 works great, except it doesn't allow me to copy files to my PC using MTP, message says unexpected error.
yet, the ManhIT and Original TWRP allow me to copy data but both of them freeze up after a few seconds which causing the copying to fail.
Reasons I'm doing this is because my SM-G925F start looping and I've tried flashing stock so many times to no avail.
I'm sure all i need to do is data/ factory wipe and my phone will boot fine, I just really need some data before I do that.
Is there perhaps a different kernel I can try?
or if anyone has any suggestions that would be very much appreciated.
Regards
Click to expand...
Click to collapse
Try with hacker kernel. Wipe cache but not data
callumbr1 said:
Try with hacker kernel. Wipe cache but not data
Click to expand...
Click to collapse
Thanks for your response callumbr1.
I've attempted two different kernels:
g925-hacker-echoe-kernel-V14.zip
hacker-kernel-S6-Universal-V12.zip
Above mentioned problems persist.
Since arter97 TWRP is not freezing on me, if I run a back up on the Data only. Then perform the wipe, the backup should still be there, correct?
and lets say I flash the stock ROM again if necessary and I'm able to boot the device.
Would it be possible to restore that data back up at all ?
or perhaps copy that back up to my PC and access/extract the files with a separate application?
Many Thanks
wahwahward said:
Thanks for your response callumbr1.
I've attempted two different kernels:
g925-hacker-echoe-kernel-V14.zip
hacker-kernel-S6-Universal-V12.zip
Above mentioned problems persist.
Since arter97 TWRP is not freezing on me, if I run a back up on the Data only. Then perform the wipe, the backup should still be there, correct?
and lets say I flash the stock ROM again if necessary and I'm able to boot the device.
Would it be possible to restore that data back up at all ?
or perhaps copy that back up to my PC and access/extract the files with a separate application?
Many Thanks
Click to expand...
Click to collapse
I think best thing to do is get an otg storage adapter that plugs direct to phone. They are cheap.
Then run the backup of data and store on otg storage. Then you have it safe and it can be restored at a later time with restore option in twrp.
Or you can always do a full nandroid backup.
Can you get onto the phone now? Does it boot up?
Is there anything specific you need off the phone? To be backed up?
callumbr1 said:
I think best thing to do is get an otg storage adapter that plugs direct to phone. They are cheap.
Then run the backup of data and store on otg storage. Then you have it safe and it can be restored at a later time with restore option in twrp.
Or you can always do a full nandroid backup.
Can you get onto the phone now? Does it boot up?
Is there anything specific you need off the phone? To be backed up?
Click to expand...
Click to collapse
I plan on getting one of those, they seem extremely useful. A colleague has one which I plan to use tomorrow if they remember to bring it, I will then do as you suggest.
Never done a full nandroid back up before but will do some searching on that.
Phone still hangs at the Samsung splash screen.
And its really only pictures and some videos that I want, contacts would be nice too.
PS, this happened when I plugged my device into the PC to charge it was at about 5%, and I was making use of side sync to control the device when it just shutdown. I thought maybe the battery died so left it to charge a bit, it eventually tried to boot up by itself and its been looping ever since. Was really strange cause it gave me no issues prior to this. When I tried to get to the recovery it would hang at the "installing updates" section once I flashed the stock ROM I was able to get to recovery to wipe the cache but no luck.
Thanks for your suggestions much appreciated.
wahwahward said:
I plan on getting one of those, they seem extremely useful. A colleague has one which I plan to use tomorrow if they remember to bring it, I will then do as you suggest.
Never done a full nandroid back up before but will do some searching on that.
Phone still hangs at the Samsung splash screen.
And its really only pictures and some videos that I want, contacts would be nice too.
PS, this happened when I plugged my device into the PC to charge it was at about 5%, and I was making use of side sync to control the device when it just shutdown. I thought maybe the battery died so left it to charge a bit, it eventually tried to boot up by itself and its been looping ever since. Was really strange cause it gave me no issues prior to this. When I tried to get to the recovery it would hang at the "installing updates" section once I flashed the stock ROM I was able to get to recovery to wipe the cache but no luck.
Thanks for your suggestions much appreciated.
Click to expand...
Click to collapse
They are really useful, one of the best things ive ever bought regarding my phone. I use it daily now.
As for nandroid backup, it basically backs up absolutely everything including the firmware and data and all partitions. I always do it before flashing or modifying anything. Then if anything goes wrong, you just flash back your nandroid backup.
Can i ask before this happened did you use google photos? If so and sync was on they will all be saved. If you dont use it i reccomend you to use it from now on incase this ever happens in future.
See how you go making the backup when you can then if you need help regarding flashing the stock and getting the phone working ill help
callumbr1 said:
They are really useful, one of the best things ive ever bought regarding my phone. I use it daily now.
As for nandroid backup, it basically backs up absolutely everything including the firmware and data and all partitions. I always do it before flashing or modifying anything. Then if anything goes wrong, you just flash back your nandroid backup.
Can i ask before this happened did you use google photos? If so and sync was on they will all be saved. If you dont use it i reccomend you to use it from now on incase this ever happens in future.
See how you go making the backup when you can then if you need help regarding flashing the stock and getting the phone working ill help
Click to expand...
Click to collapse
Good day callumbr1
I never made use of google photos, not the biggest fan of cloud storage to be completely honest but I do see its benefits when it comes to times like these. lol
as for the device, last night I flashed a custom recovery (arter97) and made use of the SkipSoft Android ToolKit to pull my photos, videos and documents through the adb protocol. That being said, I have the data I wanted so all is well there.
However, after wiping the cache and doing a data / factory reset. I reflashed the stock ROM, it all goes swell until the android pops up with a message displaying " installing system updates". It gets to 32% changes to erasing then restarts , and this happens constantly no matter how many times I flash it or restart the device.
I read on another forum that my devices is probably dead and it could be the mother board. Any thoughts?
You think maybe a custom ROM would bring it up?
wahwahward said:
Good day callumbr1
I never made use of google photos, not the biggest fan of cloud storage to be completely honest but I do see its benefits when it comes to times like these. lol
as for the device, last night I flashed a custom recovery (arter97) and made use of the SkipSoft Android ToolKit to pull my photos, videos and documents through the adb protocol. That being said, I have the data I wanted so all is well there.
However, after wiping the cache and doing a data / factory reset. I reflashed the stock ROM, it all goes swell until the android pops up with a message displaying " installing system updates". It gets to 32% changes to erasing then restarts , and this happens constantly no matter how many times I flash it or restart the device.
I read on another forum that my devices is probably dead and it could be the mother board. Any thoughts?
You think maybe a custom ROM would bring it up?
Click to expand...
Click to collapse
Thats good about your data :good:
As for the little android guy and the installing updates then erasing, this normally happens. It happens every single time i restore and normally boots fine just after its not normally an issue. After yours says erasing does it then just reboot and restart the process of erasing constantly?
What i would suggest first is to flash a different stock ROM, preferably one with newest bootloader.
After flashing, boot to recovery and wipe dalvik cache. If it gets as far as the samsung logo just leave it as the first boot can take a while... like 30 minutes.
If that doesnt work try to flash a custom ROM. I reccomend CarHD ROM. I uave used it for quite some time and no issues.
It deffinately does not sound like motherboard issue. Normally you would have many issues and errors on boot prior to having main board issues.
See how you get on and keep me updated.
callumbr1 said:
Thats good about your data :good:
As for the little android guy and the installing updates then erasing, this normally happens. It happens every single time i restore and normally boots fine just after its not normally an issue. After yours says erasing does it then just reboot and restart the process of erasing constantly?
What i would suggest first is to flash a different stock ROM, preferably one with newest bootloader.
After flashing, boot to recovery and wipe dalvik cache. If it gets as far as the samsung logo just leave it as the first boot can take a while... like 30 minutes.
If that doesnt work try to flash a custom ROM. I reccomend CarHD ROM. I uave used it for quite some time and no issues.
It deffinately does not sound like motherboard issue. Normally you would have many issues and errors on boot prior to having main board issues.
See how you get on and keep me updated.
Click to expand...
Click to collapse
It doesn't say erasing after the first time. Right after the flash it will reboot to the blue screen with the android, it displays Installing update with a percentage bar which gets to 32% then that disappears and shows erasing, then again it shows installing update with no percentage bar. The android guy has a two arrows on his chest spinning which eventually stops. The device then reboots. It goes back to the Android guy but this time it shows "installing system update" without the percentage bar, it will then freeze again then reboot. That will continue forever until the battery dies.
After flashing though I can't seem to get to recovery to wipe the cache, I hit the buttons as I always do, but the blue screen and android always appears.
This is the stock ROM I'm currently using:
https://www.sammobile.com/firmwares/download/105085/G925FXXU4DPJB_G925FXFV4DPJ2_XFV/
Do you perhaps have a link to that custom ROM? would it work fine with the service provider here in SA (Vodacom) ?
And well at least that is some good news, I'm not too keen on having to take this into a shop and pay for parts.
wahwahward said:
It doesn't say erasing after the first time. Right after the flash it will reboot to the blue screen with the android, it displays Installing update with a percentage bar which gets to 32% then that disappears and shows erasing, then again it shows installing update with no percentage bar. The android guy has a two arrows on his chest spinning which eventually stops. The device then reboots. It goes back to the Android guy but this time it shows "installing system update" without the percentage bar, it will then freeze again then reboot. That will continue forever until the battery dies.
After flashing though I can't seem to get to recovery to wipe the cache, I hit the buttons as I always do, but the blue screen and android always appears.
This is the stock ROM I'm currently using:
https://www.sammobile.com/firmwares/download/105085/G925FXXU4DPJB_G925FXFV4DPJ2_XFV/
Do you perhaps have a link to that custom ROM? would it work fine with the service provider here in SA (Vodacom) ?
And well at least that is some good news, I'm not too keen on having to take this into a shop and pay for parts.
Click to expand...
Click to collapse
Thats pretty much exactly what happens to mine after restoring or flashing but mine boots up.
Flash the firmware again but in odin options uncheck auto reboot. This time after flashing, the phone should stay off. Then you can boot to recovery.
If that doesnt work, whilst it is on the blue screen with android guy hold only vol down and power, phone will reboot, as soon as the screen goes off switch to recovery combo and this should force it to recovery.
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-carhdrom-1-t3111519/page1427
Here is the link to custom ROM, it will work fine on your phone. You need to flash this through TWRP. If you need steps on how to do this please tell me.
callumbr1 said:
Thats pretty much exactly what happens to mine after restoring or flashing but mine boots up.
Flash the firmware again but in odin options uncheck auto reboot. This time after flashing, the phone should stay off. Then you can boot to recovery.
If that doesnt work, whilst it is on the blue screen with android guy hold only vol down and power, phone will reboot, as soon as the screen goes off switch to recovery combo and this should force it to recovery.
https://forum.xda-developers.com/galaxy-s6-edge/development/rom-carhdrom-1-t3111519/page1427
Here is the link to custom ROM, it will work fine on your phone. You need to flash this through TWRP. If you need steps on how to do this please tell me.
Click to expand...
Click to collapse
Man I think I'm just going to try the custom to see if it works.
Would I need to flash a custom kernel or can it be stock?
After flashing the kernel with twrp I'm going to assume I would follow the same step.
1. flash TWRP custom recovery
2. copy .zip file to sdcard
3. go to recovery, install , select the .zip
Is that it or am I missing anything else when it comes to flashing ROMs through the recovery?
wahwahward said:
Man I think I'm just going to try the custom to see if it works.
Would I need to flash a custom kernel or can it be stock?
After flashing the kernel with twrp I'm going to assume I would follow the same step.
1. flash TWRP custom recovery
2. copy .zip file to sdcard
3. go to recovery, install , select the .zip
Is that it or am I missing anything else when it comes to flashing ROMs through the recovery?
Click to expand...
Click to collapse
Thats it.
Before installing rom go to wipe in TWRP, wipe data, dalvik, cache and system.
You dont need to flash a kernel though.
However when flashing carhd rom aroma installer will go through some choices, from there you can choose to install arter kernel. I reccomend doing this rather than keeping stock kernel.
Remember once installer complete and rom is installed leave it a while if it hangs on samsung logo screen. It can take a while to boot.
callumbr1 said:
Thats it.
Before installing rom go to wipe in TWRP, wipe data, dalvik, cache and system.
You dont need to flash a kernel though.
However when flashing carhd rom aroma installer will go through some choices, from there you can choose to install arter kernel. I reccomend doing this rather than keeping stock kernel.
Remember once installer complete and rom is installed leave it a while if it hangs on samsung logo screen. It can take a while to boot.
Click to expand...
Click to collapse
Currently waiting on the custom to download, don't have the quickest internet connection.
while I've been waiting, I've tried the stock ROM again.
something I forgot to mention before, which has happened a few times:
During the blue screen with the droid stating installing updates.
it switches to a screen with a big yellow triangle two dots below it and a dead droid.
After this I get to recovery, I wiped the cache and its getting to the samsung logo but freezes and then restarts all over again.
I'm just curious if you know what the yellow triangle thing means?
wahwahward said:
Currently waiting on the custom to download, don't have the quickest internet connection.
while I've been waiting, I've tried the stock ROM again.
something I forgot to mention before, which has happened a few times:
During the blue screen with the droid stating installing updates.
it switches to a screen with a big yellow triangle two dots below it and a dead droid.
After this I get to recovery, I wiped the cache and its getting to the samsung logo but freezes and then restarts all over again.
I'm just curious if you know what the yellow triangle thing means?
Click to expand...
Click to collapse
I think it normally means a failed update. Sometimes there are instructions to use smart switch other times it just means the update failed.
Try with the custom ROM and keep me updated.