Related
Hi,
I own a Huawei G535-L11 with unlocked bootloader and no system installed (the entire system partition was wiped during a faulty update).
I'm trying to compile a ClockworkMod Recovery for this device but every image I compile boots into a black screen.
The device mounts a Qualcomm Snapdragon 400 with an Adreno 305 GPU.
The kernel is available for download here. And here is a repository with the changes I made so far.
I would greatly appreciate any help to compile a working CWM.
Thanks.
Hi guys,
First up here are the details of the phone that I am currently using:
Zeaplus M7
MediaTek MT6752
Android 5.0
Root = YES
Unlocked = YES
Secure = NO
The Problem
I have compiled CWM using the CM-11.0 branch, and TWRP using the OmniRom and TWRP Minimal sources, but I always end up with the same problem, regardless of whether I flash CWM or TWRP.
After flashing either of the recovery.img files to the phone, I can attempt to boot into recovery and what happens is the phone restarts, sits at the splash logo (boot screen) and sits there for around 15-30seconds (using the stock recovery, it will already have booted by this point), and then it will just restart the phone and it will continue to boot to the system as normal.
This happens on both CWM and TWRP. What is causing both the recoveries to hang at the boot screen without actually entering the recovery? Is there a way I can get a logcat or log of what is happening during the recovery bootup so I can check if there are any error messages going on behind the scenes that I am missing out on?
If you need anymore information please let me know!
Thanks
Just committed the most recent files for a CWM (11.0) build. (Also contains some older files used for the TWRP build)
https://github.com/alien-13/android_device_zeaplus_m7
Hopefully that may help out a little bit more. Not 100% sure what could be causing the issue as the P6000 has a working TWRP, and I have based this device tree around the P6000 device tree (with specific changes made to suit the M7).
Not sure if this will help, I also have the z+m7 , have tried the ele p 7000 Rom on it and it works fine, twrp installs fine, but will not download from playstore , both are from needrom made by s7yler, when I go back to m7 Rom with the p7000 twrp package exactly the same happens as happens to your phone, have noticed in m7 Rom and Mijue t500 Rom which are the same, there is a file called Encrypt, which I have never seen in other roms.could this be a problem
There is now a twrp for the zeaplus m7 on the zeaplus forum
Problem (symptomatic): Phone doesn't start, always boots into bootloader. Have to go into recovery (OrangeFox), flash an OS every time - only Lineage OS 17.1 and RR Pie start up. Logs into the introduction screen. Wi-Fi, hotspot, mobile data - nothing works - freezes UI. When I try rebooting the installed OS, Lineage OS and RR P both load for some(really-long)time and finally boot into recovery. Tried flashing RR Q - booted into introduction screen, then immediately shut off with the obvious text "Shutting Off".
Device: Redmi Note 4 MediaTek (mido) 2GB 32GB.
Investigation: I think whatever is happening is because of one (or more) of the following reasons -
I tried flashing Ethereal kernel (Ethereal-Clang12-Mido-20210102.zip) into the stock from TWRP Install. When it didn't work (or did, Idk) I actually flashed it two more times. I was trying to install RR Q initially, and it kept saying something like treble-version-incompatible.
Looking up, they said updating TWRP works. So I tried updating to 3.5.0_9-0 from 3.3.1.0. Idk if this is an unstable version but it asked for a password. I tried all passwords suggested on XDA, didn't work. I don't have encryption on my device and 3.3.1 never asked for a password. I finally decided to do a full wipe. Don't remember correctly but I think this is where from it just went downhill.
Installed RR Pie, wireless services (modem?) wouldn't work. Tried fixing kernel by installing boot.img from recovery. Wouldn't work. So now I decided to flash kernel into the boot partition from Fastboot using fastboot flash boot Ethereal-Clang12-Mido-20210102.zip.
Nothing worked anymore and I installed OrangeFox which is better but of no avail to my problems. To further understand my issues, I fastbooted and force wrote the boot.img from RR Q into my persist (a partition?) Yeah. I know. What can I say, I was just possessed by madness.
Now my persist is damaged.
I don't remember correctly, but if mobile data and those network thingies don't work, I'd assume I also tried flashing something incorrect into the modem image partitons...
What I tried doing:
Flashing boot.img of RR Q to fix kernel.
Flash multiple kernels on the inernet.
I think none of these work because these installs are supposed to be conducted as extensions or upgrades over the base framework. Which is gone I think?
So here's my remnant solution strategy:
I replace all of the files and directories in my / folder (the folder accessible only to the device; the base folder of a Linux system) with whatever came initially from some similar device.
I try option #1.
I honestly don't know what to do. If I copy all of the files in the / folder from some other similar mido phone using a recovery tool and paste it on mine:
Can I even do that?
Here's a logical deduction: while the recovery app works, some files should be in use. The system should thus not let me touch those specific entries. Thus I can't paste (but surely copy) those files from somewhere; but then I can't write them onto my device in recovery. Do I need to? If yes, can fastboot be used?
Are there particular files in the / folder that are device specific? Does that mean I'll have to use Terminal to change them?
Are there easier (or, depending on the gravity of the situation, existent-at-all) alternatives? Like images for every single partition (and some partitions aren't accessible to the installer I suppose. So I may have to use Terminal)? If no, can anyone provide me the files from /?
So that's it. Tell me what you think. Quick would be awesome; I'll totally do your laundry for a week.
Nevermind, problem solved. Had to reflash modem image. Didn't know such a thing existed. Phone working fine now, in fact am typing from it.
BoundDroid said:
Nevermind, problem solved. Had to reflash modem image. Didn't know such a thing existed. Phone working fine now, in fact am typing from it.
Click to expand...
Click to collapse
....I've a similar problem. My phone stuck at bootscreen.
Where did you get the modem image and how did you flash?
opg2000 said:
....I've a similar problem. My phone stuck at bootscreen.
Where did you get the modem image and how did you flash?
Click to expand...
Click to collapse
Google "modem image for Redmi Note 4 mido". Hopefully you'll come across an isolated modem image.
If not, download stock image for RN4 mido and derive the modem image.
Note that you'll have to download the fastboot flashable image, which comes in a .tar.gz kind of a format. You'll have to extract it TWICE, once from .tar.gz to .tar, then from .tar to a normal folder. Then go browse that folder. You'll come across a directory somewhere called "images". It should contain all images that get flashed on different positions. It will also contain a "scatter text", something that probably tells the computer what to flash and where. Open it and see which one gets flashed in the modem partition(s). Flash it using -
Code:
fastboot flash <modem partition codename> <modem image name>.img
Hi everyone. I recently bought an Alcatel 1t 7 (8067) tablet, 1Gb ram, 16Gb rom, just wifi (no 4G), mt6580 processor, android oreo go edition; a very simple and cheap tablet, but it seemed me a very nice one, because is slim and lightweight; worhty of root access, but also a custom recovery. I prefer TWRP recovery because it's more organized... ¡Anyway!... So I got down to work, but at first, as I didn't know how to backup all firmware, and when I learned how to do it and did it (esentially I could "tame" sp flash tools, hehe), I had already lost my original recovery file. Is needless to say that TWRP recovery, as far as I know, isn't available for this model, so I needed to port it, but as at first, I didn't know how to back it up, I overwritten it with other recoveries that didn't work. I mean, at this time, the tablet is working but is without recovery tool. I'm not going to talk about root access, because I already could get it, by using magisk manager, but I need my recovery image file, back; both to reinstall it and port it to TWRP.
So finally, if anyone has this stock recovery file, the full stock rom for it, or even better the ported TWRP for this tablet, please share it to me.
Thanks in advance for your attention.
just boot into android, stock recovery will be repaired from /system/recovery-from-boot.p automatically
aIecxs said:
just boot into android, stock recovery will be repaired from /system/recovery-from-boot.p automatically
Click to expand...
Click to collapse
Thank you for reply. Ok, I booted android. I have enabled usb debugging so, when android booted, I connected it to adb, and opened "adb reboot recovery" command, to be sure that android would reboot into that mode; but it didn't, it just rebooted several times on boot screen, and when it "got tired" of rebooting, it booted into android. Didn't boot into recovery, so I guess, It didn't repair it.
PS: I was looking for that file "recovery-from-boot.p" on that path, and there isn't such file, i can't find it.
on older devices it is /system/etc/install-recovery.sh or something, it's maybe disabled if your device isn't completely stock anymore?
you can port TWRP with kernel from boot. you can use this TWRP as base
aIecxs said:
on older devices it is /system/etc/install-recovery.sh or something, it's maybe disabled if your device isn't completely stock anymore?
Click to expand...
Click to collapse
¿Must that file have the same size that the original recovery image? Because the only file named recovery that i can find on that path is named "recovery-resource.dat" and its size is 807kb, and as I have seen before, is that recovery images have several Mb of size.
aIecxs said:
you can port TWRP with kernel from boot. you can use this TWRP as base
Click to expand...
Click to collapse
Two questions about it; as far as I can remember twrp image must be compatible not only for the same chipset, but the same screen resolution ¿Am I right? Also, this tablet is 600x1024 px, or 1024x 600 on landscape mode. All TWRP that I have installed on former machines, worked on portrait mode, so I wonder miself ¿Could TWRP also work on landscape mode?
/system/etc/recovery-resource.dat "generates a binary patch that creates the recovery image starting with the boot image. (Most of the space in these images is just the kernel, which is identical for the two," so the resulting patch is a executable file with smaller file size than the actual recovery.) It's just few lines of code.
https://android.googlesource.com/platform/build/+/b32161a^!/
TWRP is available in landscape mode. you can read more about here
[GUIDE]Porting TWRP without source
I don't think touchscreen will work at all, so resolution doesn't matter. you can use TWRP from cmd line
https://twrp.me/faq/openrecoveryscript.html
aIecxs said:
/system/etc/recovery-resource.dat "generates a binary patch that creates the recovery image starting with the boot image. (Most of the space in these images is just the kernel, which is identical for the two," so the resulting patch is a executable file with smaller file size than the actual recovery.) It's just few lines of code.
https://android.googlesource.com/platform/build/+/b32161a^!/
Click to expand...
Click to collapse
Ok... I can find that file on my tablet, but I'm not so skilled android user, as for rebuild recovery from that file or even port TRWP from that file, so ¿Is there an easy way to do it ( or at least, comprehensible for middle skilled android users) ? ¿How? (and supposedly this machine is easy to port and root, they say on internet. I also have a huawei y7 2018 for rooting, that seems harder to root. But that's a another (my next) struggle in here, hehe)
aIecxs said:
TWRP is available in landscape mode. you can read more about here
[GUIDE]Porting TWRP without source
Click to expand...
Click to collapse
Another question. ¿Are those programs who claim to help to port TWRP with just some clicks, reliable? (for instance TWRP porter for mediatek)
aIecxs said:
I don't think touchscreen will work at all, so resolution doesn't matter. you can use TWRP from cmd line
https://twrp.me/faq/openrecoveryscript.html
Click to expand...
Click to collapse
All the TWRP recoveries that i have ported before, have had a working touchscreen, but as I understand, resolution requirement is not only for touch calibration, but for correct displaying of TWRP GUI (that all buttons and options fit on the screen), Now I've read that new versions of TWRP adjust automatically to any screen resolution, ¿Is that right?
dump boot.img off device. you can use SP Flash Tool read back. download base TWRP and unpack with AIK. replace kernel and see what happens. if TWRP booted with black screen try to enter adb shell. get partition list from adb shell. create proper twrp.fstab and flash again. you should have functional TWRP now even without working GUI.
if touchscreen is disabled it might possible to hexpatch kernel with ghidra like I did for mine.
HCU-client needs 4 credits for Huawei.
I may reply in new thread.
aIecxs said:
dump boot.img off device. you can use SP Flash Tool read back. download base TWRP and unpack with AIK. replace kernel and see what happens. if TWRP booted with black screen try to enter adb shell. get partition list from adb shell. create proper twrp.fstab and flash again. you should have functional TWRP now even without working GUI.
if touchscreen is disabled it might possible to hexpatch kernel with ghidra like I did for mine.
Click to expand...
Click to collapse
¡No, man! If TWRP porting is kinda hard having the stock recovery image, without it, is a brain smashing task (or at least for me). I mean, I really don't understand well, how to port twrp starting only with boot.img, I mean, without recovery img. I've saw tutorials about the use of carliv kitchen (windows version), and seems easy, but all tutorials are made with stock recovery.img available, not with boot.img. So, what can I do there?
as I said. replace kernel with that from boot.img and see what happens? the generic base TWRP actually is recovery.img already, so you might lucky and it works? trial + error...
aIecxs said:
as I said. replace kernel with that from boot.img and see what happens? the generic base TWRP actually is recovery.img already, so you might lucky and it works? trial + error...
Click to expand...
Click to collapse
I saw a tutorial about. It said that I must to unpack stock recovery and twrp recovery, and replace some files of unpacked twrp recovery, with respective unpacked stock recovery files, and edit some files on twrp unpacked folder, and finally repack it.
Until that point, I assume that it should work, I mean, having stock recovery. But I did that, but using boot.img, I renamed all boot resources, to recovery, for instance, boot.imgkernel to recovery.imgkernel; and replaced it, repacked it, and reflashed it, but nothing happened, I mean, it didn`t want to boot into recovery. It`s interesting to "experiment", but I`m gonna try to find its original stock recovery, to at least get it back.
Hello!
I would like some help, alcatel 1T7" 8086 no4g I likely bricked it. There's nothing else than a black screen. The tablet doesn't react to anything. The computer finds it as unknown USB tool. No visibilty is shown. What can i do with it,for it to work? Or should i just put it in the trash?
Thank you for the reply.
** UNOFFICIAL A-TEAM RELEASE**
*******Testing ONLY*******
**testing has only been done on GN2200 July patch device but should atleast boot into twrp on other sec patch on GN2200 devices***
***Let us know if not***
*****HEED THE WARNING OF IMPENDING APOCALYPSE, DOOM, BOOTLOOPS , BRIMSTONE AND FIRE, AND ALSO TWRP ******
***NOBODY IS RESPONSIBLE FOR WHAT YOU DO WITH THIS EXCEPT YOU***
***DO NOT BUILD AND FLASH THIS UNLESS YOU KNOW EXACTLY WHAT YOUR DOING***
****DONT DO ANYTHING I SAY, I CANT BE HELD RESPONSIBLE FOR WHAT I SAY OR DO*****
**THIS IS AN ** UNOFICIAL RELEASE ** SO DONT GO CRYING TO ANYONE THAT YOU MADE YOURSELF AN EXPENSIVE PAPERWEIGHT IF YOU USE ANYTHING IN THIS POST***
********* THE RESPNSIBILITY LIES SOLELY UPON YOU***
***FLASHING IN CURRENT STATE DOES NOT BOOT INTO SYSTEM****
****READ EVERYTHING BEFORE YOU DO ANYTHING******
******ONLY POSTING THIS FOR DEV PURPOSES*******
******Huge THANKS to PizzaG for this!!!******
***Thanks to Eduardo as well for his contributions, he may still be working on his own release***
Am posting this with a copy/paste i posted in telegram group..
We need people with the knowledge/skills and experience to help get this TWRP finished AND/OR work out the bugs.
GitHub - PizzaG/recovery_device_oneplus_OP515AL1
Contribute to PizzaG/recovery_device_oneplus_OP515AL1 development by creating an account on GitHub.
github.com
*this is not ready for release but the source is here for anyone who can build upon it*
touch is not working
you cant fastboot boot on this device so DO NOT flash this to your device without a backup of your stock/current boot image
issues we are having is no touch, can't mount /data, and so far cant boot into system with the recovery installed so if you want to use it youll need to flash this to boot, use it for whatever and then flash stock boot back, if your magisk patched youll need to flash the backup of that patched boot image you made before flashing this in order to get back into your system....... i have sort of found a slight work around for having to keep flashing the boot partitions until someone can get this to boot by placing my current boot image on an sdcard along with the twrp, flash the twrp to the active boot partition, boot into twrp, install image and install your backed up boot image to the current slot, then go back to advanced and install twrp to ramdisk and select and install the twrp image to the ramdisk, if your magisk patched you need to flash magisk zip right now, you can adb shell into twrp to pull a copy of this boot image if you want and i have flashed my "twrp-ramdisk installed boot image" on the Slot that my system is on and stock/backup boot image to inactive slot because its the only way to boot back to system for now without reflashing the stock(backed up) boot image back to the slot. and reboot into bootloader, change active and reboot and your back into your system.... when you need twrp you can set active to the other slot, it will bootloop once into bootloader and choose recovery to get back to twrp... when done reboot to bootloader and set active back to the other slot and reboot into system.............otg mouse works, adb works, mtp works, some work has been done on the touch but thats still not working yet, everything seems to be mounting except data............. big shout out to PizzaG for this
***this is a very round-about way to get a currently buggy twrp on the device but if you have a usb-c adapter and mouse you can navigate twrp....***
PizzaG doesnt have the device and has spent more time than anyone could possibly ask someone to spend on this for free... I dont have the skills required yet to really work on this. I have tested as much as possible and here it is for those who can build and work on it. i dont recommend releasing in its current form because im sure alot of people will be complaining and bricking their devices. if you can build it im sure you can work on it and should have the skills to atleast recover and have the sense to make backups first.......
Thanks again to everyone who has already donated the valuable time working on this for us and to everyone who will follow and build upon this!
You can find the telegram group for our device here:
You can find the A-Team in telegram
Also FYI in case you missed the post about our kernel source, it can be found here:
GitHub - OnePlusOSS/android_kernel_msm-5.4_oneplus_sm6375 at oneplus/sm6375_r_12.0.1_oneplus_nord_n20_5g
Contribute to OnePlusOSS/android_kernel_msm-5.4_oneplus_sm6375 development by creating an account on GitHub.
github.com
If anyone with experience building twrp and especially for OnePlus devices needs a tester or any files from the device hit me up on telegram @PsYk0n4uT2 and I will do my best to provide whatever you need and test builds along with providing logs.
heres a compiled boot image from the above tree as of 10/02/2022.
**remeber it DOES NOT boot to system, this is twrp only, not installed into recovery ramdisk yet. so BACKUP YOUR STOCK(current) boot image FIRST**** you will have to flash your stock(current) boot image back to boot back into your system. you can sort of get around this by above mentioned method BUT here it is for the GN2200 anyways. working on my July patched device and my May patched device so it should work for other GN2200 sec patches too...
***BACKUP BACKUP BACKUP*****
also cant change active slot from twrp, must reboot to bootloader to change active slot
Heres TWRP installed to ramdisk on a july patched boot image. does not boot to system but since it doesnt you should still be able to use this on any patch for testing purposes.....
You can backup your boot image and flash your current boot image to inactive slot and flash this to active slot by selecting recovery from bootloader after it loops once.... use twrp then go back to bootloader and change active and reboot to get back into your system.
**BACKUP YOUR CURRENT BOOT IMAGE****
***DOES NOT BOOT TO SYSTEM**
***YOU WILL NEED YOUR CURRENT BOOT IMAGE TO BOOT YOUR SYSTEM< YOU SHOULD ALREADY HAVE A BACKUP OF YOUR STOCK IMAGE IN THE CASE THAT YOU ARE MAGISK PATCHED ALREADY< KEEP A COPY OF BOTH IN CASE YOU DECIDE TO WIPE DATA< YOU WILL NOT BOOT BACK INTO YOUR SYSTEM WITH A MAGISK PATCHED BOOT IMAGE IF YOU WIPE DATA*******
if someone can get their system to boot after installing the TWRP from post 4 or their own build after personal edits please post here how you were able to achieve the install and maintain booting into system..
currently twrp indicates that path to /mnt could not be found and cant mount /data .. i think if someone could fix this maybe some progress could be made
ScarletWizard said:
I wonder if TWRP will work for devices with a serial number defeicy
Click to expand...
Click to collapse
halfway working on mine, just isnt finished yet, we need someone who knows alot more about this than i do. another dev is working on twrp but needs a device. the serial wont affect anything else other than the oneplus care app and getting the unlock token..... other than that u have full functionality.... the one posted above needs ALOT of work to finish. no touch yet but it could work for SOME things....
I know C/C++ at a decent level, however; I don't have much experience with low level stuff (especially dealing with bootloaders and other specific proprietary android kernel stuff). If there is anything that needs testing, I am down for it since this is just a secondary phone for me and I won't be too upset if it explodes.
I'm going to attempt this
[ SOLUTION ] [ MTK ] to Fix Touch not Working on TWRP / Philz Due to Kernel Disabled Touch.
In this tutorial, i'm going to show how i managed to patch kernel to enable touch in recovery TWRP / Philz. WARNING : This worked fo...
factopea.blogspot.com
It's written for mtk device but might have similar enough instructions to port for qcom kernel,
But I believe this is what is needed to get the TWRP touch going
Is the trwp.fstab using the right version? Both have different
Code:
/dev/block/bootdevice/by-name/userdata /data f2fs noatime,nosuid,nodev,discard,inlinecrypt,reserve_root=32768,resgid=1065,fsync_mode=nobarrier latemount,wait,resize,check,formattable,fileencryption=aes-256-xts:aes-256-cts:v2+inlinecrypt_optimized+wrappedkey_v0,keydirectory=/metadata/vold/metadata_encryption,metadata_encryption=aes-256-xts:wrappedkey_v0,quota,reservedsize=128M,checkpoint=fs
Try this instead in twrp.fstab
Code:
/data f2fs /dev/block/bootdevice/by-name/userdata flags=fileencryption=ice:aes-256-cts;wrappedkey;keydirectory=/metadata/vold/metadata_encryption
Techted89 said:
Is the trwp.fstab using the right version? Both have different
Code:
/dev/block/bootdevice/by-name/userdata /data f2fs noatime,nosuid,nodev,discard,inlinecrypt,reserve_root=32768,resgid=1065,fsync_mode=nobarrier latemount,wait,resize,check,formattable,fileencryption=aes-256-xts:aes-256-cts:v2+inlinecrypt_optimized+wrappedkey_v0,keydirectory=/metadata/vold/metadata_encryption,metadata_encryption=aes-256-xts:wrappedkey_v0,quota,reservedsize=128M,checkpoint=fs
Try this instead in twrp.fstab
Code:
/data f2fs /dev/block/bootdevice/by-name/userdata flags=fileencryption=ice:aes-256-cts;wrappedkey;keydirectory=/metadata/vold/metadata_encryption
Click to expand...
Click to collapse
i just unpacked the twrp image with AIK and made the suggested edits and repacked, reflashed, same...... another person is working on twrp and has gotten much of the fstab corrected in their build but their keeping their source closed til they get it ready for release and is still very far from being finished with it and doesnt have much time to work on it right now so we are just kinda stuck waiting on someone that knows what their doing to help get this going. the other person has touch working on theirs so i know its possible i just dont know how long it will be before we see a beta even
Techted89 said:
Is the trwp.fstab using the right version? Both have different
Code:
/dev/block/bootdevice/by-name/userdata /data f2fs noatime,nosuid,nodev,discard,inlinecrypt,reserve_root=32768,resgid=1065,fsync_mode=nobarrier latemount,wait,resize,check,formattable,fileencryption=aes-256-xts:aes-256-cts:v2+inlinecrypt_optimized+wrappedkey_v0,keydirectory=/metadata/vold/metadata_encryption,metadata_encryption=aes-256-xts:wrappedkey_v0,quota,reservedsize=128M,checkpoint=fs
Try this instead in twrp.fstab
Code:
/data f2fs /dev/block/bootdevice/by-name/userdata flags=fileencryption=ice:aes-256-cts;wrappedkey;keydirectory=/metadata/vold/metadata_encryption
Click to expand...
Click to collapse
also i see a recovery.fstab instead of twrp.fstab in /system/etc. is this what your referring to?
You need both from what iv read ,. TWRP.flags is a module that rewrites the stab at a certain point which may be the reason it's not compiling but I will post. Recovery.fstab is supposed to be a copy paste from the boot.img and gives the general mount partitions locations,. TWRP.fstab is mounted using the same partitions but different format/flag structure to be available to TWRP .
Techted89 said:
You need both from what iv read ,. TWRP.flags is a module that rewrites the stab at a certain point which may be the reason it's not compiling but I will post. Recovery.fstab is supposed to be a copy paste from the boot.img and gives the general mount partitions locations,. TWRP.fstab is mounted using the same partitions but different format/flag structure to be available to TWRP .
Click to expand...
Click to collapse
Interesting article above. Were you able to get that to work? I know it says MTK but seems like mechanism should be the same, or atleast I would assume anyways that the function would be very similar in the case of a flag. Was told you needed to use original kernel but then I couldn't get that to boot period. I'm out of my area of knowledge at this point but always willing to learn.
Also I tried messing around a little with the f stab and TWRP flags I was told that TWRP flags is pretty much the same as the twrp.fstab... also this build needs to have something added to the drivers I do believe that this is somehow related to USB touch it is a goodix gt9886 touch panel using the Samsung 9886 drivers. Maybe the init's need some help here as well.
I have the programming knowwledge that TWRP would require, but have not as of yet created one as my devices were typically readily complete before-hand. Once my device is back up, and running I am going to boot into Ubuntu and give it a go.
I need some excuse to have learned assembly x86, c, c++, Java, Python, and rust and have been eyeing learning scripting so it could be a fun side project assuming it is still incomplete as of the moment?
Is it normal for manufacturers to use components from other's in their builds? The kernel posted seemed to indicate at least a couple Samsung files included.
Well C is a guarantee possibly some C++ as well and definitely some sh scripting if you know rust and know how to attach it to C well enough that could add more possibilities I would imagine. The recovery is from my understanding in the boot image Android Image Kitchen would help you see it unmodified if that is the case.
I found a unofficial TWRP that flashes to the boot partition, and works pretty damn well, id have to say! I am not an experienced developer, I just like to flash around on my phone in my spare time.. Anyways here y'all go:
I am down while I got partitions backed up to the cloud.