Hello everyone
I used Rom neatrom 6.4 (JB 4.1.2). It was working fine until there ten days when I started to not receive calls, have trouble texting ... well she was beginning to tire and my S2 be asked to leave a new flash !
So I thought it's time to test some of the newest lollipop Rom.
I followed the tutorials, I went back on a clean reinstall. Then flash the 1Gb-3Gb pit and kernel kitkat compatible ... then flash the Resurrection Remix 5.5.9 with the gapps going well ... then a kernel (dorimanx and Gustavo ( ialso tested .both)).
Rom turned not bad ... just the battery that screen consumes a lot ... but I could call back, receive calls and send text messages! Briefly my laptop again played its job !.
But ... test drive ... I PAIR the phone to my Bluetooth system ... and ... unfortunately when I called ... it mutes the radio for earing conversations but no sound of my interlocutor and he didn't hear me .too..
I then flash another rom involving the RR5.5.9 (I tested the 5.8 then the cyanogen 5.1.1 and slim in 5.1.1)
Same thing ... I donew flash from beginning , clean reinstall ... and same problem !
I try with kitkat 4.4.2
For this, I flashed the pit stock 2GB
and the same result! (Resurrection remix and neatrom v8st).
I go back from zero again and return the neatrom 4.1.2 I had before and ... Everything is functional ...
So hardware seems to be ok ...
I need so your helpfull to find a solution to fully enjoy a custom rom on my s2 newer than 4.1.2
Thank you in advance for your help.
Related
Hi
I am going to get red S3 next week and was planning ROMs and kernels.
I have noticed that you need to flash ICS before flashing other JB ROMs, I am no noob to android so be as technical as possible, I absorb knowledge like a sponge.
Also I read that it only applies to people who use WEP WiFi.
This is purely to satisfy my curiosity.
Thanks
P.S does this also apply when switching from stock ROM to one of those customized stock ROMs?
pashinator said:
Hi
I am going to get red S3 next week and was planning ROMs and kernels.
I have noticed that you need to flash ICS before flashing other JB ROMs,
>>>>>>Totally untrue .
Think you are reading very old Beta test rom stuff .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
no i am reading pretty new stuff, like slim bean for example, it tells me to flash ics before that so i dont get wifi not working issue
Instructions do not say it must have ICS flashed first
Instructions say if you have wifi issue flash ICS but as i said that was old 2 september post .
Suggest you read the instructions posted for that rom as defined in post one .
From another JB or ICS Rom to SlimBean
Download device_x.x.zip, slim_gapps.zip.
Enter CWM, wipe data, format system ( in mounts and storage)
Flash Device_x.x.zip***, then MUST flash slim_gapps.zip (other files optional)
*** - If the flash is too quick ( < 5 seconds or so), reflash device before flashing common or other zip files
BT Bug? Same procedure as WIFI?
Hy guys ....
first of all ... slimrom 4.2.1 is TOP! really nice ...
but there is one thing i found on my i9300
my bluetooth connection to my bt-keyboard stays only 1 or 2 seconds till its disconnect ...
so my question: is there any other here with same problems? should i proceed like the wifi fix ( stock ics => wifi connect => reinstall ... ) ?
thx & greets from austria
mories
update: i came from slimrom 3.1 but flashed other 4.2.1 roms for testing but made superwipe before installing slimrom 4.2.1 RC1
Hello everybody,
I flashed my phone (i9300) with CM 10.1 RC and everything was good, except one thing: it's dropping outgoing calls every time you try to make one, without any message. Other thing are working perfectly: SMS, incoming calls, internet connection but not outgoing calls. So I've decided to experiment with rom's versions and flashed it with nightly release (same problem), M snapshot (same problem) and when I flashed with stable 9.1 version the ability to make outgoing calls came back, but I've got a lot of other problems (like anoying message "Android keyboard stopped working", and home button not responding). So I've desided to come back to CM 10.1 RC with outgoing calls problem.
Someone have any idea how to fix it? Please help.
Thank you!
what f/w was your phone on before flashing cm 10.1?
It was on stock official firmware.
Demilian said:
It was on stock official firmware.
Click to expand...
Click to collapse
That would be which stock firmware .
JJEgan said:
That would be which stock firmware .
Click to expand...
Click to collapse
I really dont know .It's a basic firmware that phone comes with it when you buy it.
There is a thread on this forum about this firmware (I think): http://forum.xda-developers.com/showthread.php?t=1724068
So to start I want to say that I`m using Android Hd revolution 40.0 or smth like that , first time I use a custom rom , just rooted and installed about 2 days ago .
I`m using a plantronics marque m165 , on a Samsung galaxy S3 Gt-i9300 , after installing the custom rom ^ I started hearing myself during calls , it only happens if i`m using the headset , any idea what can cause this , any settings that can fix this , or any way I can find out what the problem is exactly and fix it ??
Not using my headset is not a option..
All responses are highly apreciated.
This can easily be an issue if you didnot do a clean install or may be an unidentified bug with the rom. You say this only happened after you switched to the custom rom? Try flashing the rom again after doing a factory reset. If the problem continues then either come back to stock or change your rom, there are many more to choose from
Hey I flashed CyanFox 2.0.2 (CM11 / KitKat 4.4.2 based) and I've been experiencing constant signal issues.
One moment I have full bars and the next no signal at all. It happens randomly: during calls, while tethering, when on stand by.
I've tried different basebands / modems (MS1, MS2, MS4) but I couldn't find a fix.
Any ideas? I can always go back to stock JB but I really dig this KK rom, it's almost flawless otherwise.
Thanks
Make a backup of kitkat rom and try stock rom or some other rom stock rom is in my signature included stock kernel and modem. If it is working then its not a hardware problem then try maybe some other kitkat rom.
The link to stockrom in my signature is from xwms1 but i dont know or the moden works in every country
Sent from my GT-I9100 using Tapatalk
Did you check out calling anyone or receiving a call? Maybe its just the icon problem.......
In the end I flashed a stock 4.1.2 rom and the problem persisted, so I guess this is a hardware issue.
Thanks for the suggestions!
Hi guys,
I brought Le Max 2 few days ago...
I was boared using the stock ROM so I decided to root the device...
I rooted it success fully yesterday and Installed viper4fx drivers
Everything was worked fine ,but then I noticed that there was problem with calls.... So I uninstalled the drivers and renamed the audio_effects. config file... But not successful...
please do something devs...
And I don't want to install the stock ROM...
please suggest a fix or another ROM supporting Volte
Sorry for bad English
thank you
Dirty flash the rom you are using, you wont lose anything. And install the normal viper from the official website. Works flawless for me.
Thank you bro.....
I hope this will fix the issue without affecting volte
I had the same problem with Viper.
So, I just did dirty flash from my rom and the audio in call worked again.
Hey guys.. I found that viper works good on stock rom,but we cannot make a call as the speaker and mic are dead... This happens only while calling...
I recommend not to flash viper on stock rom or else suggest a fix for this?
Reflash rom and install the official viper4android apk from their website!
After reflashing stock rom, viper app is also deleted....
We cannot use viper in stock rom.....
After installing this, we cannot make a call