i bricked my xperia ray it's stuck at boot logo and can't enter to fastboot and can't enter to CWM i tried s1 tool and flash tool and no one of them detect the phone even i installed all the drivers please can i unbrick it or not??? please reply!!
z4all2011 said:
i bricked my xperia ray it's stuck at boot logo and can't enter to fastboot and can't enter to CWM i tried s1 tool and flash tool and no one of them detect the phone even i installed all the drivers please can i unbrick it or not??? please reply!!
Click to expand...
Click to collapse
Sounds like an s1 boot problem bro you need to reflash the bootloader (hard bricked) here http://www.omnius-server.com/phone?id=204 you have to pay though.
If flashed LG G2 D802 rom on D800/similar OR no recovery, no download, no fastboot OR errors like:
Lg g2 "cross dll" or "device model different" or "fota/laf partion changed" while flashing,
please follow :(Thanks to aftabalam8c2)
http://forum.xda-developers.com/lg-g2/general/lg-g2-cross-dll-device-model-fota-laf-t3003717
also if no download mode, no recovery mode, no fastboot mode follow this:(Thanks to Partager.info)
http://forum.xda-developers.com/showthread.php?t=2582142
if no success, please follow qhsub_bulk mode(its a bit tricky but possible, i did it myself after trying all above):(Thanks to tungkick)
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
to get into qhsub_bulk mode: (thanks to Aftab Alam)
remove battery connection inside the mobile, keep usb cable pugged from lg g2 to your windows pc and watch this video
https://www.youtube.com/watch?v=FiofVOqfnxw
helpful video, how to remove logic board(its not require to remove full logic board, just for reference): (Thanks to Paul W)
https://www.youtube.com/watch?v=O12UJMOCx1w
hope your phone comes back to life...
I don't want any donations, just wanted to help, as i spend so many days and nights to bring my phone back to life, after lots of research i am sharing all at one place so you guys can save your time.
Thanks and regards
Abhishek Sharma
Helppp meeee pleaseeee...!!
Hi bro, i was trying to upgrade my firmware via LG PC Suite and it upgraded my firmware to
D80220C on my LG_LS980 now im stuck at LG boot screen ( light keeps blinking ), cant do anything, pleaseeeeeeeeeeee help ASAP!!!
At the back cover it says LS 980 but the phone was showing it as D 802 ( firmware D80220b ) ABOUT PHONE ( im sure its a refurbished set / had no idea before ) , before upgrading it had D80220C , D80220b was installed on it , any solution [ STUCK AT LG LOGO SCREEN ] sorry for my bad english ? and please can you guide me STEP by STEP ( just want it to work again / stock / custom any rom will work for me )
M Tariq Khan said:
Hi bro, i was trying to upgrade my firmware via LG PC Suite and it upgraded my firmware to
D80220C on my LG_LS980 now im stuck at LG boot screen ( light keeps blinking ), cant do anything, pleaseeeeeeeeeeee help ASAP!!!
At the back cover it says LS 980 but the phone was showing it as D 802 ( firmware D80220b ) ABOUT PHONE ( im sure its a refurbished set / had no idea before ) , before upgrading it had D80220C , D80220b was installed on it , any solution [ STUCK AT LG LOGO SCREEN ] sorry for my bad english ? and please can you guide me STEP by STEP ( just want it to work again / stock / custom any rom will work for me )
Click to expand...
Click to collapse
Phone off you hand logo lg
You need short testpoint phone detect qhsusb_bulk and show very partitiont download tool unbrick qualcom 9006 of my download all partitiont img and use tool unbrick qualcom 9006 of my unbrick
If you attack pc detect qhsusb_bulk but no show very partitiont you try unplug cable and inplug attack again( and again) and show partitiont done.Next unbrick
tungkick said:
Phone off you hand logo lg
You need short testpoint phone detect qhsusb_bulk and show very partitiont download tool unbrick qualcom 9006 of my download all partitiont img and use tool unbrick qualcom 9006 of my unbrick
If you attack pc detect qhsusb_bulk but no show very partitiont you try unplug cable and inplug attack again( and again) and show partitiont done.Next unbrick
Click to expand...
Click to collapse
Thankyou, Update : I can go to Download mode, but when i enter into Dwn mode it there is a blackscreen written FASTBOOT, RESET , PORT etc , any idea how to fix it? Model : D-800-32GB
M Tariq Khan said:
Thankyou, Update : I can go to Download mode, but when i enter into Dwn mode it there is a blackscreen written FASTBOOT, RESET , PORT etc , any idea how to fix it? Model : D-800-32GB
Click to expand...
Click to collapse
PHONE of you in fastboot
need download driver fastboot connect pc and install
use fastboot flash all partitiont in cmd
fastboot flash boot boot.img (enter)
fastboot flash aboot aboot.img
fastboot flash tz tz.img
fastboot flash rpm rpm.img
fastboot flash laf laf.img
fastboot flash recovery recovery.img
fastboot flash sbl1 sbl1.img
all file partitione download http://downloads.codefi.re/autoprime/LG/LG_G2/D800/Stock_Firmware/10d_partitions
Hello, my android phone could not power on, no recovery, no fastboot and is not charging at all. Not responding. But it is being detected with sp flashtool. I am only able to flash the preloader only. I am also able to format the device with sp flashtool also. The error i get is "error: Status_invalid_gpt"
kindly guide me through and provide a possible solution. Thanks https://s18.postimg.cc/4vuzw6uh5/screen_Shot_20171210155209.png
pls help me my device not verify after flash via flashtool
device : Oukitel c12 pro MT6739
Hello people,
I bricked my Phone with custom recovery i tried TWRP Official
now it bootloops doesnt open fastboot
when i use mtk client i can flash things
a
how to flash a fastboot with mtk_client
maybe that helps me out
thx
i somehow managed to solve it by myself
can be closed "?"