Boots in UEFI mode from live USB in "guest" mode only. Sees my WiFi AP and appears to connect without errors. But not able to open any webpage in the browser. Also, I'm confused because there is no menu or task bar visible. I can only see 4 icons on the desktop. Is that normal?... the task bar only shows up after installation? I see no options to install it. help?
ISO used: Remix_OS_for_PC_64bit_B2016040501.iso
Make/Model: Lenovo Ideapad G50-45 notebook
CPU: AMD A6-6310
GPU: Radeon R4/R5 integrated
Memory: 8GB
Hard Driver: 1TB internal samsung 5400rpm
Video Card: integrated
Audio Card: integrated
Network Card: Realtek RTL8723be wifi
Related
Dear XDA developers,
recently I've bought an Android TV Box, you can read a techincal datashet of it at this link:
telcominstrument . com
on the left menu select: Box Android Internet TV FULL-HD 1080p - Android 4.0 TV Box Full-HD Wireless
technical specification:
•Sistema Operativo Android 4.0;
•Microprocessore CPU BOXCHIP A10 frequenza 1.2GHz;
•Memoria RAM DD3 1GB, Flash 4GB;
•Uscita Video HDMI 1.4, Full HD 1080P, con decoder hardware;
•Connessione Wi-Fi a velocità massima 300mbps;
•Antenna Wifi Omnidirezionale;
•supporto Videochiamate Skype;
•Compatibile HDD formattati in FAT, FAT32, NTFS, EXT2, EXT3;
•Risoluzione Alta Definizione Full HD 1080p, max. 1920x1280px;
Principally I've one problem, It's impossible to write on an external usb disk, a permission denied message appears at all attempt.
I've tryied some different format for the device FAT,FAT32 and NTFS but no one allow me to write on the device.
So I've search some solution on internet and I've found this one:
"To enable USB host API support you should add a file named
android.hardware.usb.host.xml and containing the following lines:
<permissions>
<feature name="android.hardware.usb.host"/>
</permissions>into folder
/system/etc/permissionsin that folder find file named
handheld_core_hardware.xml or tablet_core_hardware.xml and add
<feature name="android.hardware.usb.host">
into <permissions> sectionReboot your device. Usb host api should work.
Tested on CUBE U30GT with android 4."
Unfortunatelly I haven't the access to modify the system /etc/permision folder, so I think that I must root my Android Box, but How?
Can You halp me with the USB and Root issue?
Thanks at all,
Hello all,
I have recevied an old tablet "goClever i102 ( Airis Kira N10020) and it is slow.
Here are it's specifications:
• 10" Wide TFT (1024x600)
• ARM11 up to 1 GHz Processor
• Memory 512 MB DDR2
• Storage Flash 4 GB
• WLAN - LAN 10/100
• mini HDMI - Web-Cam - 4x USB
• micro SD/SD-HC Card Reader
• Dimensions 246.6 x 172.7 x 24.5 mm.
• Weight ~ 0.90 Kg.
• Android 2.3 OS
The manufacturer's page for the device:
http://www.airissupport.com/SupportHome2.aspx?Codigo=N10020
Here are some aditional informations I gathered by openning it:
Processor
========
Infotmic imapx210bm1-80
pcc265 oop-1
1133
Stuff written on the main board
========================
pc1051
ver.1.2
2011/12/14
s-m
940-0
e305905
Some integraded circuits I could not identify
==================================
4x Samsung k4t1g164qf-bce7
Hynix Nand Flash Memory
====================
H27UBG8T2ATR-BC
PARALLEL 8M FLASH T
====================
MCXMX29LV800CBTI-70G
I rooted the device and I posted the instructions here:
http://forum.xda-developers.com/android/help/rooting-goclever-i102-n10020-t3119091
I would like to install on it Arch linux or some other linux core.
I set up a virtual machine with linux, installed a cross-compiler and the toolchain to build for ARMv6 processors and then I tried to build a bootloaded and a kernel for the tablet. It succesfuly built the kernel, just to test the toolchain ,but soon I realized that I could not configure u-boot for this specific processor. I could not find any pre-made configurations files for it. I don't have much knowledge about how to build a kernel or a bootloader.
Could anyone help me regarding this issue or give some instructions how to manually configure u-boot?
PS: I tried to boot on some RasberryPi softwares that I could find on the internet but it did not boot. Also I tried some linux software for the tablets Airis Kira N7000 / N8000 / N9000 that I found here: https://kirbian.wordpress.com/descargas/airis-kira-n7000-n8000-n9000/ ,and booted the kernel for a very short time(it displayed something like uzImage.bin and a loading bar), but then the screen went black with the cursor blinking on the left. After this it remains in this state, nothing loads or changes. After I reboot it, it loads the stock rom (Android 2.3.3)...
Thank you in advance!
Hi everyone:
I install RemixOS on hard drive following some directions found on XDA (http://forum.xda-developers.com/remix/remix-os/question-install-remix-dedicated-hdd-t3316527) to installs the system directly to hard drive without dual boot.
What i did was the following: After pressing TAB on Resident mode, i removed everything after "quiet". Then i put INSTALL=1 and then format to ext4 to use all the disk space.
The installer finalizes without errors, but when i restart and choose normal init at GRUB, the system stucks on flashing screen, then never enters to graphic env.
The things changes when i boot in debug mode. The system boot up completely but to console. I know how to use Linux, but this distro its very different to an standard one, so i need some directions to diagnose and solve the problem.
In debug mode, when i grep dmesg for error or warning nothing is found. All the devices are detected and aparently installed.
The only thing that got my attention when i installed Remix was the following messages:
- intel_powerclamp: Intel powerclamp does not run on family 6 model 15
- intel_rapl: driver does not support CPU family 6 model 15
But these msgs i suppose that are normal because is an old CPU that not support all the features that the driver does, right?
Anyway, these are the specs of the intallation:
- RemixOS version: B2016071501.
- CPU: Intel Dual Core E2160 1.68Ghz
- MB: Foxconn 45CMX
- GPU: Intel integrated on MB. I don't know the exact model
- HDD: 60Gb SATA
Any ideas to solve this problem?
Many thanks in advance.
Hi
I have tried usb key, hdd install using both 32 and 64 bit, however after the grub screen my display goes blank. I have waited over 30 mins but it does load and show remix screen. Here is my config. I have this running fine on my old HP pavilion and its great so would love to be able to run it on my large Acer. Any help appreciated
OS Name Microsoft Windows 7 Ultimate N
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name KITCHEN
System Manufacturer Acer
System Model Aspire Z5610
System Type x64-based PC
Processor Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2327 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date Phoenix P01-B2, 19/01/2010
SMBIOS Version 2.6
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United Kingdom
Hardware Abstraction Layer Version = "6.1.7601.17514"
Time Zone GMT Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.87 GB
Available Physical Memory 1.63 GB
Total Virtual Memory 7.74 GB
Available Virtual Memory 5.45 GB
Page File Space 3.87 GB
Page File C:\pagefile.sys
Name NVIDIA GeForce G210M
PNP Device ID PCI\VEN_10DE&DEV_0A74&SUBSYS_069110DE&REV_A2\4&357F6195&0&0008
Adapter Type GeForce G210M, NVIDIA compatible
Adapter Description NVIDIA GeForce G210M
Adapter RAM 512.00 MB (536,870,912 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 8.17.11.9666
INF File oem5.inf (Section013 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1920 x 1080 x 60 hertz
Bits/Pixel 32
Memory Address 0xFC000000-0xFCFFFFFF
Memory Address 0xE0000000-0xEFFFFFFF
Memory Address 0xDE000000-0xDFFFFFFF
I/O Port 0x00002000-0x0000207F
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nvlddmkm.sys (8.17.11.9666, 13.09 MB (13,728,616 bytes), 17/02/2010 06:13)
Hello guys, I have a problem with this box: the system partition was tempered with (they tried to remove root) and I want to flash a new rom to fix it.
I opened it to check the hardware but the manufacturer have shielded the wifi chipset so I can't read the numbers on it.
Dmesg says:
Code:
dhd_conf_set_chiprev: chip=0x4334, chiprev=3
And I found these files in etc/wifi/
p2p_supplicant_overlay.conf
wpa_supplicant.conf
Folder 40183
config.txt
fw_bcm40183b2.bin
fw_bcm40183b2_apsta.bin
fw_bcm40183b2_p2p.bin
fw_bcm4334b1_ag.bin
fw_bcm4334b1_ag_apsta.bin
fw_bcm4334b1_apsta.bin
fw_bcm4334b1_p2p.bin
nvram.txt
So it's a broadcom4334, right? Too bad I haven't found any rom that clearly states bcm 4334 or 40183 and s905x, except this
Full specification as read from the amazon page @ https://www.amazon.it/gp/product/B0788MX52X/
OS: Android 7.1.2
Bluetooth: 4.0
CPU: AmlogicS905X Quad Core Cortex A53 a 1.5 GHz 64 bit
GPU: Penta-core Mali-450MP
RAM: 2 GB DDR
ROM: 16 GB EMMC
Wifi: IEEE 802.11 a / b / g / n, Dual-Band 2.4G/5G
LAN: 10 / 100M, standard RJ-45
The Motherboard (Aida says it's p212) doesn't have an hidden button, unlike other boxes, but I can boot into recovery using a terminal emulator
Of course I tried reaching to goobangdoo but they haven't replied.
Edit: typos
Edit: updates
I want at least root the box, I found
deamonsu, su, su.bak in system/xbin
su in sbin
Rootchecker says root is not installed properly.
I have the UPDATE&BACKUP and I used it to install:
UPDATE-unSU-signed.zip > deletes nothing
SuperSU-v2.82-201705271822 > bad recovery error
Magisk-v16.0 > failed to find meta-inf/com/android/metadata in update package
Everything failed and I tried from recovery, same thing.
I can still return the box so I'm trying not to install twrp since I don't have the stock recovery.
I'm stuck.