Hello everybody. (sorry for my writing mistakes )
XT910 with stock firmware: http://savepic.org/6550017.png
IMEI - EMEA region
Worked fine.
But then...
Through BMM installed - LiquidSmooth KitKat (http://forum.xda-developers.com/showthread.php?t=2782971)
and then
"SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_ASIA_RETAIL_HKTW_CFC_HWp2b_SIGNED.xml.zip"
(I do not know why. It was not me. But I want to help restore the phone.)
When the process is finished (Successfully О_о), the phone no longer worked.
Now:
Normally mode, Recovery - not working:
Invalid Flash Mode (S) (Boot Failure)
0A.77
To return to normal mode - first press power key to poser down
Device is LOCKED. Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
Invalid CG OTV (CG: system): Invalid SP Data
Invalid CG HAB (CG: system, status: 0X004E)
Invalid CG OTV (CG: system)
What we tried to install (AP Fastboot - RSDLite 6.1.5):
- SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_NZ_CFC_HWp2b_SIGNED.xml.zip
- SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_AUSTRALIA_OPTUS_CFC_HWp2b_SIGNED.xml.zip
- SPYDERIRD_U.01.6.7.3-94_SPI-328_04.11.01P_0A.74_MEA_RETAIL_CFC_HWp2b_SIGNED.xml.zip
- SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSO2DE_HWp2b_Service1FF_fastboot.xml.zip
- SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
- 673.94.324.XT910.AsiaRetail.en.03.xml.
- 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RTFE1007.0R_USASPDRJBRTFR_P013_A014_p2b_S1FF_fb_CFC.xml.zip (Retail FR)
- 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip (Retail GB)
Always:
11/28/14 11:48:56 [Device ID: 0] 1/19 flash mbm "allow-mbmloader-flashing-mbm.bin"
11/28/14 11:48:56 [Device ID: 0] 2/19 reboot-bootloader
11/28/14 11:49:00 [Device ID: 0] 3/19 flash mbmloader "mbmloader.bin"
11/28/14 11:49:01 [Device ID: 0] 4/19 flash mbm "mbm.bin"
11/28/14 11:49:02 [Device ID: 0] 5/19 reboot-bootloader
11/28/14 11:49:06 [Device ID: 0] 6/19 flash cdt.bin "cdt.bin_signed"
11/28/14 11:49:06 ERROR: 6/19 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL. - on device ID 0.
11/28/14 11:49:06 [Device ID: 0] 6/19 flash cdt.bin "cdt.bin_signed" -> Phone returned FAIL.
11/28/14 11:49:06 ERROR: Failed flashing process. - on device ID 0.
This metod:
1-download cdt.bin ( http://www.mediafire.com/?ua1nj6ds6r0vtue )
2-download fastboot files ( http://dfiles.eu/files/bih3tmg7b )
3-restart your phone in to bootloader ( fastboot ) mode
4-connect your phone via usb cable
5-open cmd.exe in your pc an go to fastboot files
6-flash cdt.bin via this command -------------------------------------- fastboot flash cdt.bin cdt.bin
7-restart your phone in to stock recovery
8-do triple wipe and restart your phone
Nothing helps! Can you help? What can we do?
Thanks for help...
No one has any ideas?
that's interesting: tried to remove CID and failed, because: (see picture)
Code:
Erasing CID ... INFOCommand Restricted
Wrong command?
And:
Code:
CID:5
XT910S ?
Why can not we delete CID?
Thanks for "help".
Mission completed.
Thread is closed.
did u manage to fix your i have the same problem with you please some one should help,i just want to get my phone back to normal, i have the same firmware with u
jamil1982 said:
did u manage to fix your i have the same problem with you please some one should help,i just want to get my phone back to normal, i have the same firmware with u
Click to expand...
Click to collapse
This is my script for FastBoot (0A:77 Bootloader and for XT910S)
Warning! This will remove your CID!
Use this method only when all other methods have failed.
https :// yadi .sk/d/M2EmR9HKdA3pF
unpack RAR: in C:/MyRecover/
Connect your phone (AP Fastboot mode) to PC.
Run MyRecoverV1.bat
done.
After that, you can install any firmware (RSDLite 6.1.5)
reccomend: Britain Retail 4.1.2 : https :// yadi .sk/d/zcq12jT5d44mu
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
Get Root
Install BMM 0.3.4
Now your phone loaded automatically (without BP TOOLS)
VasyaAgPro said:
This is my script for FastBoot (0A:77 Bootloader and for XT910S)
Warning! This will remove your CID!
Use this method only when all other methods have failed.
https :// yadi .sk/d/M2EmR9HKdA3pF
unpack RAR: in C:/MyRecover/
Connect your phone (AP Fastboot mode) to PC.
Run MyRecoverV1.bat
done.
After that, you can install any firmware (RSDLite 6.1.5)
reccomend: Britain Retail 4.1.2 : https :// yadi .sk/d/zcq12jT5d44mu
After finish all task whitout errors, reboot cellphone, press Volume up, volume down and Power, and selet "BP Tools"
Get Root
Install BMM 0.3.4
Now your phone loaded automatically (without BP TOOLS)
Click to expand...
Click to collapse
Downloading Right now thank You i will give u feed back:good:
after running my MyRecoverV1.bat see what i got
---------------------------------------------------------------
Delete CID for kwyjibo jr by Vasya
---------------------------------------------------------------
Press any key to continue . . .
---------------------------------------------------------------
getvar:all FAILED (remote: unsupported command)
finished. total time: 0.008s
getvar:all FAILED (remote: unsupported command)
---------------------------------------------------------------
0A3BEC240400A007 fastboot
0A3BEC240400A007 fastboot
CID delete:
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.010s
sending 'mbm' (512 KB)... OKAY [ 0.089s]
writing 'mbm'... OKAY [ 0.486s]
sending 'mbm' (512 KB)... OKAY [ 0.089s]
writing 'mbm'... OKAY [ 0.507s]
finished. total time: 0.596s
rebooting into bootloader... OKAY [ 0.007s]
finished. total time: 0.008s
< waiting for device >
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.011s
rebooting into bootloader... OKAY [ 0.008s]
finished. total time: 0.009s
< waiting for device >
sending 'mbm' (512 KB)... OKAY [ 0.102s]
writing 'mbm'... OKAY [ 0.489s]
sending 'mbm' (512 KB)... OKAY [ 0.103s]
writing 'mbm'... OKAY [ 0.483s]
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.010s
rebooting into bootloader... OKAY [ 0.007s]
< waiting for device >
sending 'mbm' (512 KB)... OKAY [ 0.102s]
writing 'mbm'... OKAY [ 0.488s]
finished. total time: 0.592s
sending 'mbm' (512 KB)... OKAY [ 0.090s]
writing 'mbm'... OKAY [ 0.508s]
finished. total time: 0.599s
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
erasing 'cid'... INFOCommand restricted
FAILED (remote: )
finished. total time: 0.010s
rebooting into bootloader... OKAY [ 0.006s]
finished. total time: 0.007s
< waiting for device >
cid: 5
finished. total time: 0.018s
Press any key to continue . . .
any help please?
this is what my phone is showing
jamil1982 said:
this is what my phone is showing
Click to expand...
Click to collapse
CID not erased, for 0A:74 BootLoader try to use:
http://forum.xda-developers.com/showthread.php?t=2372614
If you want to check, removed CID or not:
Just see on last line in MyRecoverV1:
Code:
< waiting for device >
[COLOR="Red"]cid: 5[/COLOR]
finished. total time: 0.018s
When CID : DEAD - you win
If another thread not helps you:
Run MyRecoverV2 and MyRecoverV3 and again V1
it should help.
VasyaAgPro said:
CID not erased, for 0A:74 BootLoader try to use:
http://forum.xda-developers.com/showthread.php?t=2372614
If you want to check, removed CID or not:
Just see on last line in MyRecoverV1:
Code:
< waiting for device >
[COLOR="Red"]cid: 5[/COLOR]
finished. total time: 0.018s
When CID : DEAD - you win
If another thread not helps you:
Run MyRecoverV2 and MyRecoverV3 and again V1
it should help.
Click to expand...
Click to collapse
thanks i will check the link please can u give me the easy way on how to make a motorola factory cable? i have some factory cables that came with my polar 3 box whenever i connect the cable from my phone to the system the phone show white led light and my system doesnt recognize the phone so i dont know if the phone is charging or not and im afraid of loosing the power battery,but with normal cable my system recognize it but the white led light doesnt show, thank you once again
---------- Post added at 09:14 AM ---------- Previous post was at 08:45 AM ----------
strange i run all the bat but it give me the same
cid: 5
jamil1982 said:
thanks i will check the link please can u give me the easy way on how to make a motorola factory cable? i have some factory cables that came with my polar 3 box whenever i connect the cable from my phone to the system the phone show white led light and my system doesnt recognize the phone so i dont know if the phone is charging or not and im afraid of loosing the power battery,but with normal cable my system recognize it but the white led light doesnt show, thank you once again
Click to expand...
Click to collapse
Only one way for factory cable: (see picture)
jamil1982 said:
strange i run all the bat but it give me the same
cid: 5
Click to expand...
Click to collapse
Now run MyrecoverV2 and V3, then V1 for check.
VasyaAgPro said:
Only one way for factory cable: (see picture)
Now run MyrecoverV2 and V3, then V1 for check.
Click to expand...
Click to collapse
I run the V2 and V3 then Run the V1 again it showed the same thing, but I noticed its like the number has change from 0a.74 to 0A.74 and now its Showing 0A.75
jamil1982 said:
I run the V2 and V3 then Run the V1 again it showed the same thing, but I noticed its like the number has change from 0a.74 to 0A.74 and now its Showing 0A.75
Click to expand...
Click to collapse
hmm...
now - run all .bat files - V1, then 2, then 3 (after 3 NOT run again 1 !)
and finally "info.bat. (https :// yadi .sk/d/HdYWqS1gdAhfr)
Put info.bat to "MyRecovery" dir and run.
Log insert here.
VasyaAgPro said:
hmm...
now - run all .bat files - V1, then 2, then 3 (after 3 NOT run again 1 !)
and finally "info.bat. (https :// yadi .sk/d/HdYWqS1gdAhfr)
Put info.bat to "MyRecovery" dir and run.
Log insert here.
Click to expand...
Click to collapse
OHHH MY G You are Genius :good: after running Myrecover1 again it deleted the cid everything went smooth and the number on my Ap fastboot display 0A.77 then i run this 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip, it run perfect without any error:laugh: then my phone restart showing Costumer error. Contact Resseller, the i off it and on it to boot menu then select Bp Tools, my phone restart, its time for me to get rid of the Costumer error. Contact Resseller if u can provide me the link i will be very greatfull thanks for everything:good::good::good:
Im rooted using this method http://forum.xda-developers.com/showthread.php?t=2298408 then install BMM Everything went ok only the Costumer error. Contact Resseller but im ok like this thank you so much
xt910 bricked and cant find firmware
Hi,
I also have xt910 razr maxx and i bricked it after installing some kind of custom rom app.
I want to flash stock firmware but all the links on internet are broken. I guess I need this one:
SPDREM_U_01.6.7.2-180_SPU-19-TA-11.6_SIGNEuropeAustraliaEMEA_USASPDRICSRTGB_HWp2b_ Service1FF_fastboot.xml.zip
Can aybody help me with a working link of this file pls, its kinda urgent.
Thanks.
VasyaAgPro said:
No one has any ideas?
that's interesting: tried to remove CID and failed, because: (see picture)
Code:
Erasing CID ... INFOCommand Restricted
Wrong command?
And:
Code:
CID:5
XT910S ?
Why can not we delete CID?
Click to expand...
Click to collapse
02/05/15 14:26:13.393 WARNING: Port 0/1/2 #0: Failed to execute "fastboot -s MedfieldEAABA328 flash radio "F:\LENOVO\K900\K900_ROW_LA_1_S_2_009_0035_130822_DVT3_CPUsign_Lang\radio_firmware_6360.bin"":
sending 'radio' (11310 KB)
fname=F:\LENOVO\K900\K900_ROW_LA_1_S_2_009_0035_130822_DVT3_CPUsign_Lang\radio_firmware_6360.bin...
OKAY [ 0.733s]
writing 'radio'...
FAILED (remote: flash_cmds error!
)
finished. total time: 10.101s
02/05/15 14:26:15.393 ERROR : Port 0/1/2 #0: Flash failure
can anyone help me with this one? any solution for it ?
thanks in advance .....
Hello guys, i bricked my phone and now i get errors:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
I have unlocked bootloader, access to fastboot and stock recovery. Any idea how to fix it?
I can't flash anything becouse i get error FAILED (remote: Command not allowed). I have driver for my phone (Android ADB Interface)
D:\ROOT\Minimal ADB and Fastboot>fastboot devices
9WV7N18425025395 fastboot
D:\ROOT\Minimal ADB and Fastboot>fastboot flash ramdisk patched_ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (8638 KB)...
OKAY [ 0.268s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.276s
D:\ROOT\Minimal ADB and Fastboot>
edit.
I had to relock bootloader and i get access to stock recovery, form there i can dowload software last version
IDeeJay91 said:
Hello guys, i bricked my phone and now i get errors:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
I have unlocked bootloader, access to fastboot and stock recovery. Any idea how to fix it?
I can't flash anything becouse i get error FAILED (remote: Command not allowed). I have driver for my phone (Android ADB Interface)
D:\ROOT\Minimal ADB and Fastboot>fastboot devices
9WV7N18425025395 fastboot
D:\ROOT\Minimal ADB and Fastboot>fastboot flash ramdisk patched_ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (8638 KB)...
OKAY [ 0.268s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.276s
D:\ROOT\Minimal ADB and Fastboot>
edit.
I had to relock bootloader and i get access to stock recovery, form there i can dowload software last version
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p20-lite/help/solution-nova-3e-p20-lites-brock-bolt-t3816608 my Solution
César Terrazas said:
https://forum.xda-developers.com/huawei-p20-lite/help/solution-nova-3e-p20-lites-brock-bolt-t3816608 my Solution
Click to expand...
Click to collapse
i cant used this method becouse i had FRP locked and i cant flash anything...
IDeeJay91 said:
Hello guys, i bricked my phone and now i get errors:
Error!
Func NO : 11 (reovery image)
Error NO : 2 (load failed!)
I have unlocked bootloader, access to fastboot and stock recovery. Any idea how to fix it?
I can't flash anything becouse i get error FAILED (remote: Command not allowed). I have driver for my phone (Android ADB Interface)
D:\ROOT\Minimal ADB and Fastboot>fastboot devices
9WV7N18425025395 fastboot
D:\ROOT\Minimal ADB and Fastboot>fastboot flash ramdisk patched_ramdisk.img
target reported max download size of 471859200 bytes
sending 'ramdisk' (8638 KB)...
OKAY [ 0.268s]
writing 'ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.276s
D:\ROOT\Minimal ADB and Fastboot>
edit.
I had to relock bootloader and i get access to stock recovery, form there i can dowload software last version
Click to expand...
Click to collapse
I've the same problem if you get the solution please inform me as well
Thanks
IDeeJay91 said:
i cant used this method becouse i had FRP locked and i cant flash anything...
Click to expand...
Click to collapse
Watch a YouTube tutorial to umlock FRP
frnds,
when i try to install twrp for my honor 8 lite oreo with cmd it shows like this;
(i unlocked oem and phone)
c:/adb>fastboot flash recovery RECOVERY-V2.img
target reported max downlod size of 471859200 bytes
sending 'recovery' (9100 KB)...
OKAY [ 0.313s]
writing ' recovery'....
FAILED (remote: partition length get error )
finished. total time: 0.322s
now i lost my stock recovery. how will i solve this problem .
i'm using a windows 10 pc
when i try to install a twrp the cmd shows this failed message
plzzz help me to solve this problem.
i hope you will find a solution for this.
frnds,
when i try to install twrp for my honor 8 lite oreo with cmd it shows like this;
(i unlocked oem and phone)
c:/adb>fastboot flash recovery RECOVERY-V2.img
target reported max downlod size of 471859200 bytes
sending 'recovery' (9100 KB)...
OKAY [ 0.313s]
writing ' recovery'....
FAILED (remote: partition length get error )
finished. total time: 0.322s
now i lost my stock recovery. how will i solve this problem .
i'm using a windows 10 pc
when i try to install a twrp the cmd shows this failed message
plzzz help me to solve this problem.
i hope you will find a solution for this.
alisonpoulose said:
frnds,
when i try to install twrp for my honor 8 lite oreo with cmd it shows like this;
(i unlocked oem and phone)
c:/adb>fastboot flash recovery RECOVERY-V2.img
target reported max downlod size of 471859200 bytes
sending 'recovery' (9100 KB)...
OKAY [ 0.313s]
writing ' recovery'....
FAILED (remote: partition length get error )
finished. total time: 0.322s
now i lost my stock recovery. how will i solve this problem .
i'm using a windows 10 pc
when i try to install a twrp the cmd shows this failed message
plzzz help me to solve this problem.
i hope you will find a solution for this.
Click to expand...
Click to collapse
You need to make this command :
fastboot flash ramdisk "patched_ramdisk.img"
Until yours [emoji846]
failed to install twrp
fastboot flash ramdisk "patched_ramdisk.img"
where did i get this file? did i need to rename the twrp.img to patched_ramdisk.img.
failed to install twrp
i renamed twrp.img to patched_ramdisk.img then thake cmd and typed like this;;;
c:/adb>fastboot flash ramdisk patched_ramdisk.img
error: cannot load 'patched_ramdisk.img
what will i do now plz help me to find a solution:::::
failed to install twrp
now i tried it again now it shows likes this
c/adb>fastboot flash ramdisk patched_ramdisk.img
target reported max downlod size of 471859200 bytes
sending 'ramdisk (31572 KB)...
OKAY [ 1.084s]
writing 'ramdisk'....
FAILED (remote: partition error)
finished. total time: 1.095s
here the failed message changed
in previous it is (remote: patition length error)
but now it changed to remote: partition error
bro plz help me to find a solution
i hope u can clarify it
thankyou
fastboot flash ramdisk "patched_ramdisk.img"
thanku brooooo it workssssss thanks alot
:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good:
my twrp is red in colour others are blue
bro is there is any problem with my twrp
can i change it to blue colour
plz help me
Hi folks,
I´ve an Xiaomi Poco F1 with an unlocked bootloader. Usb debugging is enabled and no password is set. If I run
HTML:
fastboot flash recovery twrp.img
the error
HTML:
Sending 'recovery' (31000 KB) FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
appers. Any ideas why this happens?
Count_Omega said:
Hi folks,
I´ve an Xiaomi Poco F1 with an unlocked bootloader. Usb debugging is enabled and no password is set. If I run
HTML:
fastboot flash recovery twrp.img
the error
HTML:
Sending 'recovery' (31000 KB) FAILED (Write to device failed (Unknown error))
fastboot: error: Command failed
appers. Any ideas why this happens?
Click to expand...
Click to collapse
Under linux, I get a success
HTML:
target reported max download size of 536870912 bytes
sending 'recovery' (6 KB)...
OKAY [ 0.010s]
writing 'recovery'...
OKAY [ 0.003s]
finished. total time: 0.013s
and
HTML:
fastboot boot twrp.img
creating boot image...
creating boot image - 10240 bytes
downloading 'boot.img'...
OKAY [ 0.008s]
booting...
OKAY [ 0.051s]
finished. total time: 0.059s
runs along. But it doesn´t get through to the twrp screen.
some weeks ago i read on forum that miui10.0.3 or 4 has some fastboot errors,
for example if you have flashed miui10.0.3 or 10.0.4 and then try to write recovery it will give error in fastboot
i would suggest flash miui10.0.1 or earlier via miuiflasher fastboot rom and then try!