Hi,
My android tablet iBall Brace-X1 which is with Android 4.4.2, Kernal 3.4.67 and MT6592. Its RAM is 2GB with 16GB of internal storage.
I did root it successfully but not able to install any custom recovery.
I tried many editions of TWRP but It doesn’t support any of TWRP editions.
Also it doesn’t support ClockwordMod.
While unlocking bootloader, I used ‘fastboot oem unlock’. I confirmed on tablet screen by press Volume Up but no changes on screen of computer and tablet. Even after 45 min, there are no changes on tablet screen and command prompt.
When I did google search, I found CyanogenMod 11 and CyanogenMod 12 would be compatible with this but I am not sure that which Custom ROM is compatible with it (Android 4.4.2, Kernal 3.4.67 and MT6592).
Please assist me for all above concerns.
Regards
Ugn10
Ctr custom recovery for iball brace x1
Hi friends, I ported ctr recovery for iBall brace x1. Fully compatible In touch and mode . first of all root the device. If you don't know how, just google it.
1- download the recovery image attached below .
2- install flashify or similar flashing app.
3- backup your current recovery.(it may be used to recover stock recovery in case of any disaster)
4- flash the downloaded recovery.
Restart in recovery mode done.:laugh:
Related
Dear sir, brother i want to flash cwm recovery into LT700 but i am unable to do. becuase not such type of cwm recovery, twrp recovery and Philz recovery found. it is also not detected by mtk droid tool 2.5.3. it may be of mtk6735 devices and this version of 2.5.3 may not be supported to lollipop and also i have lot of serached to find the fastboot driver for lt700 but all tries are effortless. and window 7 is also unable to install it automatically. my Qmobile Noir lt700 have a lollipop version 5.0
Not sure what this has to do with xPosed, perhaps it's better to ask in the board related to you device.
So i've that device running stock Lolipop 5.1
Got it rooted with iRoot and replaced with SuperSU
After some wasted hours i realised, MTK Tools was for 4.4 only.
I can't even create a scatter file for that device...
How can i get CWM or TWRP for that device?
I've flashed various rec from other MT6580 phones i found here, but no one will boot.
Boot & Recovery: https://transfer.sh/s4LSC/flashify-backup.rar
Partitions: http://imgur.com/a/k3PH4
Hi,
I used a prerooted firmware thrill boost to root my device because I tried many tricks and apps to root my device but all the time I failed to do this. Now I have twrp recovery for my device symphony v75 but touch not working on it when goes to recovery mode. Does anyone help me to make this recovery touchable or tell me why it happen?
Custom recovery CWM working finly on it but the problem is only twrp recovery... Advance Thanks for help..
kernel version : 3.18.19
Android version : 6.0
Chipset : Mediatek 6580
Hi, I want to install custom rom on my tablet but I can't flash or enter into any custom recovery I know.
Tablet specs:
It's a chinese BDF tablet 10''
Brand: JTY
Board: KT107_L1_20160428
Procesor: MT6580
Kernel: 3.10.72+
Android: 6.0 Marshmallow
I tried to do it using many tutorials and many ways founded on many forums, including this, without success.
During these attempts I unlocked root and bootloader, installed on my pc ADB drivers, Google USB drivers, MTK vcom drivers, PdaNet, on my device PdaNet, BusyBox, TWRP manager and ROM manager.
First I tried to install TWRP recovery using the newest recovery from their website and 3 others recoverys which I found on the internet and should be dedicated for my tablet. I installed each one of them using ADB in Command window, SP flash tool and Easy magic TWRP installer, which is dedicated for any MediaTek device, both ways: manual and automatic. Every attemp was successful but every time when I checked in TWRP manager, it said what I don't have any custom recovery installed on the device, when I tried to enter into it through the boot menu it wasn't entering into TWRP, only the chinese stock recovery.
Then I tried with Easy magic PhilZ 6 installer, but the effect was the same.
At the end I tried to install CWM using MTK Droid Tools, but this program doesn't see my device and I couldn't fix this.
Could any of you help me somehow, explain or give me a right recovery file so that it works. I really want to change my Android to a LineageOS and I'm tired of my fails. I'm working on this 5 days, accidently bricked it, stucked on bootloop and stucked on logo screen so many times that I can't even count, I'm desperate for help.
any luck yet ?
Hi !
I have the exact same issues with my Chinese BDF tablet. No matter how i try to Flash a custom bootloader to the tablet, it simply wont work... Even tho it looks like i succeed, whenever i want to boot into the custom bootloader, it always boot into the installed chinese bootloader, and the chinese bootloader wont let med flash custom firmware to the tablet. Let me know if you find a fix, and i will do the same if i succeed installing a different bootloader
I did not see this specifically in your question so as far as i understand it. You first flash the twrp.img, this is a temporary boot file. DO NOT REBOOT YET. flash Magisk.zip and twrp.zip - now reboot and you should be rooted.
Hi, today I was more than seven hours on PCr and tried this....unsuccessfully... I'm really desperate
I have:
-Xperia Z2 (D6503)
-Android 6.0.1
-newest firmware 23.5.A.1.291
-UNlocked bootloader
I am trying to install root, twrp recovery and custom ROM ( specifically this ROM ). But i cannot enter to the recovery mode...
Official twrp-3.0.2-0 succesfully flashed in fastboot but when i try command "fastboot reboot recovery" the mobile only load android and turns on normally... the combination hardware buttons also do not work.
The next question is, What is a kernel ? I have successfully installed this kernel .... Could this be the reason why I can't load the recover mode?
Please help me, I don't know what to do anymore :crying: all I want is root and custom rom
EDIT: okay, i successfully root phone and finally i have access to recovery mode (TWRP 3.0.2-0) by THIS TUTORIAL now i need help with installing the custom ROM step-by-step because if I turn something wrong and phone will be bricked again, I guess I'll kill myself xD so What is next step for install custom ROM please ? Can I just download THIS, install the zip in TWRP and that´s all ???
Yup you can install it by recovery steps:
kubesak97 said:
Hi, today I was more than seven hours on PCr and tried this....unsuccessfully... I'm really desperate
I have:
-Xperia Z2 (D6503)
-Android 6.0.1
-newest firmware 23.5.A.1.291
-UNlocked bootloader
I am trying to install root, twrp recovery and custom ROM ( specifically this ROM ). But i cannot enter to the recovery mode...
Official twrp-3.0.2-0 succesfully flashed in fastboot but when i try command "fastboot reboot recovery" the mobile only load android and turns on normally... the combination hardware buttons also do not work.
The next question is, What is a kernel ? I have successfully installed this kernel .... Could this be the reason why I can't load the recover mode?
Please help me, I don't know what to do anymore :crying: all I want is root and custom rom
EDIT: okay, i successfully root phone and finally i have access to recovery mode (TWRP 3.0.2-0) by THIS TUTORIAL now i need help with installing the custom ROM step-by-step because if I turn something wrong and phone will be bricked again, I guess I'll kill myself xD so What is next step for install custom ROM please ? Can I just download THIS, install the zip in TWRP and that´s all ???
Click to expand...
Click to collapse
before you do this you should backup all your important data
1-wipe data factory reset
2- wipe cache
3- install zip rom
4- download google apps and install it by recovery it should be a zip file
5-repot system and enjoy
the recovery is like twrp or cwm it's not a kernel
there is 2 type of kernel :
1-kernel itself
2-kernel with merged recovery
about the kernel and recovery, there is deference the kernel is very important for system to work it connects between the hardware and the software and every operating system has its own kernel but here in android they sometimes merge kernel with recovery but when you flash-kernel or recovery every one replace each other be careful and know that, don't worry you won't brick something in the near future when you will install custom ROMs you will notice that.
if you need any help you can ask me