Thl 2015 Recovery Loop Problem | Rooted | Kitkat 4.4.4 - Android Q&A, Help & Troubleshooting

Hey there, I'm currently possesed a THL 2015, chiense phone, with firmare kitkat 4.4.4, Rooted.
Ok, today i was trying to change my Bootanimation (which i've changed several times already), but i've encountred a huge problem.
My phone has stucked on On/Off loops at the first time after i've changed the bootanimation...
Well i've tried to enter Recovery Mode.. but.. hmm.. how should i put it... My phone got stuck on it aswell..
My phone is looping in Recovery mode (i know that because there is the logo with the "No command thing"),
The device is turning off, then back on every 7~15 seconds after enerting automaticly into Recovery mode..
I've tried every single key pressing on the On/off key and Volume keys.. but in failure.. the Recovery mode won't goes out, and the device still loops.
Okay... now What i've tried also.
I've tried to connect my device into my computer trying to getting a shell trough ADB. but in failure, cause of the device loops in Recovery Mode, adb and the computer won't recongnizing my device.
Ok.. Flashing?
So i've tried to download SP_Flash_tool for flashing into stocked downloaded rom, but also in failure, non of the roms i've downloaded for my Device were recognized in the SP flash tool, (the scatter).
I've downloaded it from several sites in them were this site: needrom/com/download/thl-2015.
Tried every rom, still not recognizing.
Well i've failured in everything i've tried, so im here asking for help.
My main goal is getting a shell for my device, for me deleting the bootanimation i've tried to install.
ok.. i've talked too much..
Thank's for helping.

Related

[ROM Problem] Strange stuck LG P500 but not the usually problem

Hi, i've a strange (but i hope common and resolvable) problem.
After all, i say that i searched through the forum (with the search function) but with the solution that i found and tried i didn't solve anything.
I start saying that i got a p500 with a broken sdcard reader board (it simply doesn't have a microsd 'cause doesn't recognize).
That phone some days ago just shut down and went stuck on the LG Logo.
I tried at first the hard reset (home+vlm down+pwr), nothing happens.
I tried then the recovery mode and try to update with lg updater, and didn't work, lg doesn't recognize the phone on the updater (but on the main screen of the BBc app does).
The last thing that i noticed is that one time, powering on the phone, button's leds flashed about 4-5 times. but if i try to re-do the action, doesn't get anymore.
I would know if there is another way to exit from this stuck-screen.
I also post the log of error i get from kdz:
Upgrade error
WParam: 100
LParam: 500
Here is the log: http://pastebin.com/4SECdaT4
Other things i forgot to say:
I don't need to shake the phone, if kdz doesn't detect, i take off the battery, and turn on the phone in emergency mode (up+back+pwr).
Sometimes kdz works without that error, but it reboots the phone and it stucks again in the lg silver logo.
I read about a wipe of /system through adb, but if i try to mound /system, i get the command list.
I can't do adb devices, doesn't detect the phone, and in sequence to this, can't open the adb shell.
any suggestion?
You recovery got corrupt when it was stuck on LG logo, which could be easily solved by fastboot method of recovery flashing.
I was on the same situation like you are on now. Now follow this:
Try booting into fastboot mode by pressing "Power+ home buttons"
If it does then notify me here or at PM.
Between this is not the appropriate section for this thread.
I tried to fastboot, i did fastboot erase recovery and fastboot flash recovery recovery.img commands, no errors, but when i type fastboot reboot, on the screen i read: rebooting the device, but it doesn't reboot. If i take off the usb cable, (after a big time, 10 mins for example), a --suspend-- appears.
if i take off the battery, the lg logo is stuck again, and if i do home+vol down+pwr the clockwork mod doesn't appear.. any suggestion?
See your PM
Sent from my LG-P500 using Tapatalk

Unable to boot to Recovery Mode GS3

Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
cugami said:
Hello
I have been using my int Gs3 for sometime and decided to root and explore the mods and custom fw world. I have started with getting to root access and after that install CWM.
Then I try to install nightly cyanogenmod 10. It didnt work and boot back to normal GS3 Touchwiz interface. After that I tried the GooManager and when the phone is restarted it went to bootloop. I removed the battery and put it back. The problem started there.
The phone does not boot to any OS, I only can see the galaxy s3 9300 black splash screen and awatis there. I can go into download mode, but when I go into recovery mode, I can see the Android robot, and it dies The screen is too fast but what I can see it cannot mount EFS, System and any folder.
So I have tried several different methods
- Tried to flash with original rom, different roms, CWM and what I can find suitable for international model. But everytime I got stucked in Nand Write part. In some of them, the flash started and stucked in installing some parts(passes the cache and hidden and stuck after that)
- Tried with bricked phone roms, different PIT files and Bootloader Vralec methods.
- When I am trying these, I have tried with 3 different PC's with/without KIES and Samsung drivers installed. When I plug the phone in Download mode, the PC recognizes it as Generic device.
- I manage to flash the CWM but when it restarts it does not go any further than the first splash screen, but in Odin, some time later it turns to pass. Funny, when the phone is on Galasy S3 black splash screen, the pc recognizes the phone and starts to install the driver.
So, here is an interesting flashing story of mine. I really would appreciate your valuable comments and suggestions.
Thanks in advance.
Click to expand...
Click to collapse
GO here : http://forum.xda-developers.com/showthread.php?t=1993044

[Q] Samsung S6500 problem

Hi everyone, I have this weird problem with my S6500, or rather my younger brother has.
He tried to put on his S6500 (not D, this phone is with NFC) Cyanogenmod 10.1, after some ups and downs, he finally got it to work, but... camera wasn't working, it was said on the cyanogenmod page to flash with the newest update, he did that, phone worked good... almost, after he was blocking his screen, he couldn't unlock it, because there was some kind of white screen stuff, weirder was the thing, that he could hear all the *clicking* sounds as he was trying to unlock. He had to restart the phone every time after he blocked the screen, so he wanted the phone to function normally and tried to put his stock ROM back again. Well the flashing went well (as Odin showed) but the phone stucked in bootloop.
The phone showed the Orange logo (he is using his original stock rom from Orange Poland, downloaded from sammymobile) and then it quickly changed to Samsung logo, after that the phone vibrates once, and after that it vibrates 3 times really fast and restarts from the Orange logo.
He tried to get into Recovery mode, but coul;dn't (the phone doesn't react to any of the combinations we found - vol+,vol-, home and power and many others), and as I forgot to mention before, after every flash (while the recovery was working) he cleared data in menu of the recovery.
We also tried the different method to boot the phone into recovery mode (put it in Download mode, which works and then instead of going further by pressing vol+ we pressed the down button and held vol+,vol- and home button, but instead of going into recovery the phone booted in weird screen with small letters RAMDUMP MODE (ARM9 mode).
We tried several times to flash new recovery with Odin, but it doesnt work, the PIT file also doesn't work, or can someone provide me with the stock s6500 PIT file as I couldn't find one, because I read in the Polish forum, that screen mentioned before only shows up if there is a SuperUser app in the phone, so we need the PIT file to flush it.
So the problem is after flashing it with numerous cwm and original stock roms we couldn't get it to boot or to get into recovery menu, or get it working.
Also the hardware is all ok, as the phone is almost brand-new ( he got it from the Orange few months ago).
So help plz?
I have the very SAME problem with my S6500D. Same as described above.
Anyone has managed to fix this problem ? I have all needed tools.

Help! Boot Loop or Complete Brick? :(

So a friend recently bought this spanish voxter tab 97 IPS (16GB) and after a few days of usage and several attempt to install a custom ROM, the tablet stopped booting. According to him, he tried loading a "compatibility bla bla bla.zip" file with CMW which I really do not know what it is, and since he did the installation, the tab stopped booting into system. Every time it's turned on, it just stops at the boot screen and nothing more. Although before this, he had installed a custom recovery and had also done a Nandroid backup with the recovery. However, what baffles me is, CMW is no longer accessible through the normal "power + volume up" key combo and I'm quite unsure of how to boot into fastboot.
That aside, I tried booting into recovery with adb because apparently, adb recognizes the device whenever it's stuck at boot screen, this also failed, neither did rebooting into fastboot via adb work. All I need to know is if this device is totally bricked, or if there's still something I can do. If there's any, I really would appreciate every help offered. Thanks..

Stuck in bootloop Neffos X1. No recovery mode.

Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.

Categories

Resources