Hi,
I got my first cellphone with authority rooted in Andriod 5.x hereafter I switched on Andriod 6.0.1 after I got him here was rooted in my x axis wrong if I left then he clicks it up right ( Q is p on my keyboard) I have no backup or something . I've reset it , and I am currently actually a little desperate.
Does anyone have a solution so ?
It is a s6
Thanks in advance!
Joep
You didn't mention how you updated, but it doesn't sound like you did it officially. You should download the original firmware and flash via Odin. It'll wipe the phone so make sure to back up everything you need somewhere safe. If you rooted via a custom kernel that wasn't for your variant of S6, that might have caused this issue.
es0tericcha0s said:
You didn't mention how you updated, but it doesn't sound like you did it officially. You should download the original firmware and flash via Odin. It'll wipe the phone so make sure to back up everything you need somewhere safe. If you rooted via a custom kernel that wasn't for your variant of S6, that might have caused this issue.
Click to expand...
Click to collapse
I updated with Odin and rooted with Odin. Do you have a link for the original software?
Device SM-920f Netherlands
Well which firmware did you use? Which file to root? Did you have the issue after the firmware update or root?
Related
Thanks for reading - I'm a noob.
I came here to learn about rooting devices over 6 months ago and decided to have a go at rooting my SGS 2 to remove the bloatware and speed it up a bit.
Performance has been great - I left the stock firmware because the OS/ROM was not a concern to me. I simply flashed the kernel with CF Root: CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.tar
Now I am led to understand I would need to flash back to my stock kernel to allow the OTA update for ICS - the only issue is I cannot find any available downloads for I9100TDVKF4 - Telstra's stock kernel.
Now I read somewhere a reply to a similar question was "just flash it with a new rom, I dont know why you want to go to stock" - Well I want to update to the official ICS. I was under the impression that would be available a long time ago and never was. I just want to....
Please can anyone help me to point out where I can find that kernel? perhaps there is a different kernel i could use?!
Is there any ICS firmware I would be able to download and flash to the ROM using Odin whilst keeping my phone rooted?
I found this place really helpful in how to root and now I just hope someone can help me get onto ICS!
Cheers
Is there any ICS firmware I would be able to download and flash to the ROM using Odin whilst keeping my phone rooted?
No only custom rooted firmware .
Try Checkfus for your stock firmware download and flash via Odin .
Dont confuse yourself with kernels without understanding .
ICS on Checkfus or Kies for your phone install otherwise wait until your provider releases .
or flash your original saved firmware that will overwrite root .
jje
Thanks for taking the time to reply mate....
Dont confuse yourself with kernels without understanding - dont worry ive been trying not to but it seems thats the only thing i changed on my phone when i rooted it so i was lead to believe i needed to change that back...
My provider has just released new version of ICS but i cant actually install it once ive downloaded it over the air it only gets to 8% then reboots itself and i believe thats because the phone is rooted...
or flash your original saved firmware that will overwrite root - I dont know if i backed it up correctly on the guide i was using!!! The only thing i backed up was the apps using titanium backup so now i feel im stuck!
Use check fus down loader and get the official ics ROM.
It's under i9100t Australia/telestra
Problem solved.
Hi, and apologies as this is probably the 10,000th post on JB updates. I have searched etc, but just wanted a sanity check to see if I have this right.
As the title says, I have a UK GT-I9300 (BTU) that was rooted in my eagerness when I dumped ios (so used to Jailbreaking, I didnt even think about it). I'll admit I didnt think things through at the time (or read up enough!)
So, I rooted the phone using Odin and CF-Root-SGS3-v6.0, and now JB is upon us. I now know that I can't just use Kies or OTA (unless Ive got it wrong), so I just need to use Odin to flash a download (from one of the various Firmware sites) of the JB update for my particular version ?
If I want it to appear as unmodified, I need to use Triangle Away ?
Have I got this correct, or am I missing a piece of the jigsaw, or do I need a pre-rooted JB ?
Cheers for any help, as I'd rather not stuff this up
If I need to flash the stock rom via odin first, I'll have to find it, as all the links I found are dead now :fingers-crossed:
Hi everyone,
I am having issues with my Samsung S3 i9300. I rooted the phone while using ICS OS, then updated to jelly bean today, via official update. Then unfortunately tried to install chainfire 3D and my phone is now stuck on the samsung sIII i9300 logo.
I have tried to wipe all the data by using volume up + home + power, but still no success.
Furthermore, I was trying to do a fresh install from a downloaded stock firmware from samsung website, but I do not know the exact model number/code for my device as I really did not pay attention before. How can I check the firmware version if the phone does not start?
Please really need your help, as I am new to android and Samsung S3 and I am stuck.
Please any other suggestions?? I have not made any backup (neither with CWM) of the phone, but it does not matter, phone was almost clean.
Thanks in advance!!
Flash a .pda file with Odin.
thread: http://forum.xda-developers.com/showthread.php?t=1646610
See video tutorial in that thread.
TheCraig said:
Flash a .pda file with Odin.
thread: http://forum.xda-developers.com/showthread.php?t=1646610
See video tutorial in that thread.
Click to expand...
Click to collapse
Any firmware version will work?
Will the firmware version on that link work on my device?
Are there any other special procedures to flash the firmware of my phone (besides the instructions on that link) that I need to be aware of, or just by using the pda with Odin it will work fine? Since my phone was already rooted and so on....
thanks
Might be a kernel so just flash something new.
Hello everybody, my device is a Samsung Galaxy S Duos S7652.
I am new at this whole rooting thing, i did my first rooting to be honest yesterday and i chose PMP Ultra custom rom, because it was the best rom for my taste.
Unfortunately i didn't know about baseband compability , and my baseband version was s7562xxlj3 , and now my phone cannot receive or make calls.
I need help, what do i do??
I cant even find my original rom so i can install that, or even a custom rom that supports my baseband..
Can you please help me?
Best regards, Alkis.
alkis91 said:
...i did my first rooting to be honest yesterday and i chose PMP Ultra custom rom...
Click to expand...
Click to collapse
I think you are mixing some definitions.
Rooting is providing root capabilities to the phone, this is a standard operation in the *nix world.
Selecting a ROM is formatting the whole system and put a new one and you probably changed the kernel (hence the baseband problem).
Fortunately the phone is not bricked (unable to boot), so my recommendation is try to check if there are other kernels/ROMs compatible and change it.
Fortunately this showed while searching: http://forum.xda-developers.com/showpost.php?p=42182649&postcount=1708
alkis91 said:
Hello everybody, my device is a Samsung Galaxy S Duos S7652.
I am new at this whole rooting thing, i did my first rooting to be honest yesterday and i chose PMP Ultra custom rom, because it was the best rom for my taste.
Unfortunately i didn't know about baseband compability , and my baseband version was s7562xxlj3 , and now my phone cannot receive or make calls.
I need help, what do i do??
I cant even find my original rom so i can install that, or even a custom rom that supports my baseband..
Can you please help me?
Best regards, Alkis.
Click to expand...
Click to collapse
I would recommend either restoring a NANDROID backup in recovery and if you don't have a backup I would recommend searching for your devices firmware here http://www.sammobile.com/firmwares/1/ and then flashing it via Odin. Let me know if you still have questions I'll be happy to help you out.
Sent from my SCH-I535 using XDA Premium 4 mobile app
-solved-
Actually i solved the problem with a little reaserch, i flashed a differend firmware, and then the pmp rom worked like a charm
Thanks to everyone anyway!
alkis91 said:
Actually i solved the problem with a little reaserch, i flashed a differend firmware, and then the pmp rom worked like a charm
Thanks to everyone anyway!
Click to expand...
Click to collapse
Hey man, could you share with us some details how you solved the problem? What firmare you flashed, did you used some custom kernel etc?
Thanks.
best way is too..
Reflash the stock firmware by going into download mode by pressing voldwn+Home+power and connect it to pc only when u have d samsng drvrs or kies installed on pc and firmware file too..
shankarsj said:
Reflash the stock firmware by going into download mode by pressing voldwn+Home+power and connect it to pc only when u have d samsng drvrs or kies installed on pc and firmware file too..
Click to expand...
Click to collapse
That's a bit of overkill if they just need the modem, unless it's not been separated out of the original full firmware to flash separately, or you need to update the bootloaders.
To dosadnik2001: Which firmware you need depends on which region the phone is from typically. Sometimes other modems from other firmwares work on unlocked phones, but best to stick with what you know should work right first.
What I do not understand is how the baseband firmware and the custom ROM are related?
I've found some post about changing the baseband firmware and there they say that the ROM doesn't care about the baseband, so you should only change it if there are some optimized baseband that can make your network coverage better. On the other side, I found several post claiming that certain ROM is not working because of the baseband firmware version.
Flashing firmware that is not for your region is again questionable for me. Doesn't this going to mess up somehow the microwave part of the phone and you can have some issues with the network carrier eventually?
Thanks.
Hi i recently had some trouble with my phone sgh1337m and somehow lost my backup , i downloaded this but it is not factory and seems broken , no wifi or phone dial function. .
lluggnut said:
Hi i recently had some trouble with my phone sgh1337m and somehow lost my backup , i downloaded this but it is not factory and seems broken , no wifi or phone dial function. .
Click to expand...
Click to collapse
*sigh* You realize when you say "I downloaded this..." without providing what "this" is is pretty useless for us to help you troubleshoot?
What update WERE you on before you started modifying the phone?
What did you download and install?
What modem / baseband version is installed?
Wifi and phone functions are most likely not working because you either downloaded the wrong thing or didn't follow the installation instructions correctly. Typically this would be because of mismatched modem and kernel or there's a patch that needs to be installed.
Usually I would just say install the newest stock firmware (4.4.2) through Odin, but depending on what update the phone had originally and if you plan on continuing to customize your phone, it might be better to stick on an older system as the newer ones really lock down the ATT version.
Long story short: Help us help you. Provide ALL the details about what's going on and we can probably get you fixed up easily enough.
Sry
I337MVLUFNC1_880525_REV06_user_low_ship_MULTI i installed this rom , i was on kit kat 4.4.2. and i installed gummy rom which did not work , then realized i lost the @#$#@% backup here is what it says under about device: model sgh1337m
android version -4.2.2
baseband -1337mvluamdj
kernel version 3.4.0-517283 [email protected]#1
build number - jdq39.1337mvluamdj
selinux status - permissive
i have data but no wifi and cant dial out . wish i was more careful with my stock rom lol. i dont think the kernel is right ? Think gummy rom did something to it . can i fix or can i get stock rom ? I am on rogers carrier and need canada rom or to fix can you tell me if there is a patch .
I just realized that samsung posts their factory roms so i am thinking to go back to SGH-I337M RWC I337MVLUFNC1 4.4.2 . which is what I had there before , Do i need to do anything special before i flash it , this file is .zip so what is the best way to flash ? ROM Manager?