Hi
I'm new her and sorry for my bad English
I have a wiko lenny phone a few days ago my phone stuck on wiko logo on welcome screen and blocked there even if I tried to charge it battery logo appears without percentage of charging and the screen always power on and red led not working so i flashed it by sp flash tool but didn't work although sp flash tool program said phone flashed successfully!!
I can't hard reset it because it says : CANNOT GET ENCRYPT STATE
so please anyone can help me...
thanks
any help please...
I'm still waiting...
Flash
Flash the stock rom again :3 search for it on needrom
Give a flash with latest STOCK ROM for your device, after flashing still getting boot-loop give a hard reset It should work after reset.
For Flashing U need
1-USB drivers
2-Latest Flashing Tool
3-Latest Stock ROM
STOCK ROM check HERE
2nd LINK HERE
Also please provide us Complete info of your device.
Thanks
Related
Please help me guys ((((
first you should know i rooted my phone and got new kernel and ROM 2 months ago : MIUI
but today i wanted to flash a new fast kernel "fusion" and get superJB rom ...
*i can't post links of the kernel and rom because this is my first post*
i flashed the kernel successfully with flash tool
then i tried to boot my phone i just got the fusion logo forever
so i had to pull the battery out many times
i said it was ok and i began to flash the new ROM maybe it would work
now the problem : my little brother hit the mobile cable while flashing the system.img ( rom image )
:'(
i tried to restart the process but the phone doesn't respond and i just have the logo of fusion
forever and the blue led always on .. when it boots (((
I Need help please what can i do ????
ANYTHING will be appreciated
up
up
Hi guys, new to the forum, but been reading for a while now.
I need some help with my gf's device which i got messed.. So here is the problem:
Device: Alcatel One Touch S'Pop (4030x)
Carrier: Globul(Bulgarian)
Root: YES
SU Status: Installed SuperSU
Stock firmware: latest ver of Android JB 4030x modded for globul
Recovery: Selfmade CWM.
So the problem is that the device was stock and sim locked by carrier globul, what i was trying to do is root inastall cust recovery and install new rom, hoping that this will debloat the device and eventualy sim unlock it, now i am stuck with a white screen every time i try to boot it, juat after the first boot animation. Tried to go to recovery - work flawlessly. Tried re-installing the custom ROM several times with no luck.. Here is what i done:
Rooted with VRoot, then installed CWM recovery via MTK Droid Root & Tools, all worked fine, the stock (rooted) ROM booted with no problems at all (restarted couple o times)
Then i downloaded to my SD the last version of GE-Rom from MXDevelopers blog and tried to flash it via recovery, following their guide(only difference that i used CWM instead of TWRP) everything went well and nice, then i pressed "Reboot device now" option in the recovery and it rebooted, shown the 1st bootlogo and than that white screen (ofdeath) and it doesn't do anything except when i press volume down and hold it, it vibrates as when you switch silent mode on with the vol keys, also i noticed that the power button works as supposed (locks unlocks).
What i need to do is getting a custom rom working on the device, or at least a stock (non globul) rom working on it..
I tried to flash thru recovery the X9 ROM in hope it will do the job but null... I tried several times to install and re install the rom with no succes so far. What i am thinking is that i somehow damaged the boot image ( i havent touched it but i dont know if the custom rom had tried to modify it. )
Please help!!
Will click the thanks button, i promise
If anything in the given information is unclear, just ask and i will clear it for you, or in case i haven't given enough info on something..
C'mon guys.. Why nobody posting ? I followed the help request guide, i made clear what the problem is and i've given all the information that is avail. ...
I mean.. Please help, any help, advice or whatever will be highly apreciated.. You see, i'm new here but if there is something i can help with - then i will do it.. I know that some devs here do have got that model of alcatel..
I had a very similar problem to yours and
Only resolved it today. Go into XDA and search
Bricked Alcatel 4030. Wergi1 has the solution
Well it worked for me good luck.
Hi,
I tried to Flash My phone with SP Flash Tool : Clone S5 G900H MT6571 with this ROM : s5-mtk6571-sm-g900h-hard-work-by-tonymananpa from needrom.com
Before I Flashed It , it was totally dead, after the Flash it make sounds when I touch the screen , but the problem is my screen is Black , I don't know why.
I need your help please. :crying: :crying: :crying:
Same here
I have the same problem, in fact, mine gets detected by the computer after i successfully flashed the rom. However, i am thinking it has something to do with kernel ver. Did you manage to get it fixed
Dreysus said:
I have the same problem, in fact, mine gets detected by the computer after i successfully flashed the rom. However, i am thinking it has something to do with kernel ver. Did you manage to get it fixed
Click to expand...
Click to collapse
No , If you have a solution please inform me
Hello everyone !
I have a small (huge) problem with my new phone : a Wiko Lenny 2 , it's simlocked to an operator (SALT Mobile SA ) so i tried to flash the stock rom and everything goes well untill i switch it on, and now i have grey stripes who moves on it and no bootscreen, but he seems to boot but all i have is grey stripes.. Can you help me please ?
Is the recovery mode and bootloader mode still accessable? If so, you should try to get stock rom and reflash it via recovery mode or bootloader, but if not then im afraid it's bricked
emils2235 said:
Is the recovery mode and bootloader mode still accessable? If so, you should try to get stock rom and reflash it via recovery mode or bootloader, but if not then im afraid it's bricked
Click to expand...
Click to collapse
I think it's bricked so ... :crying: any idea how to unbrick it... ?
Honestly i cannot actually tell if its bricked or not, because i haven't seen in person, but your best situation would be to do research on your phone by googling the problem. The worst case what could happen is taking to warranty or if it's definetly brocked then buy new phone.
I had the same problem and fixed it. Reinstall the phones firmware
"LENNY2_v23.zip"
Problem solved
tik6111 said:
I had the same problem and fixed it. Reinstall the phones firmware
"LENNY2_v23.zip"
Problem solved
Click to expand...
Click to collapse
it work and It's fixed thank you so much !
i reinstalled the CDC and VCOM drivers for Wiko lenny 2 and i reinstalled the firmware "LENNY2_v23.zip" like you said :good:
firmware
androidfilehost.com/?fid=962021903579484264
My Oppo Q300 got stucked on Bootloop on oppo logo then restart..
First my phone was not rooted nor not flashed another roms or any activity on system customization..
so here what i tried to do but nothing works for me.
Soft Reset- i removed battery also resets many times.
Hard Reset- i go to the system recovery boot menu and wipe all data but after it. it was the same stucked on bootloop.
Charged to full baterry
Can someone tell me what do i do..
also can i flash a new rom without installing custom recovery such as CWM, etc.
and if i can please give me links and atleast simple instructions for it.
Im might be new on this things but i can do it i know so please tell me how..
Thanks in Advance hoping to get good news for the next few days..
Thanks you.