early console in decompress_kernel
input_data: 0x01556101
input_len: 0x004eb1fd
output: 0x01000000
output_len: 0x00a30490
run_size: 0x00adc000
Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel.
same message displayed both the time first i tried with the 64 bit version then the 32 bit
please help.
Same happend to after updating to 2.0.402
and besides from that message, below appears this:
.
[ 0230018] Failed to find cpu0 device node
Detecting android-x86... foun at /dev/sda7
Checking data partition ...
[email protected]_x86_64:/ #
Related
Hey guys. I'm trying to port Ubuntu Touch to the Beaglebone Black development board. I've already ported CM 10.1. I compiled the Ubuntu Touch files successfully. If I understand correctly, I put the contents of ubuntu-root on my rootfs partition. When I boot, the rootfs is mounted, but there's a kernel panic because it can't find /init, even though it's there. I've set the permissions to rwx for user/group/others as a test. Also, I noticed init is not a binary but a readable script (not sure if this makes a difference). Any thoughts? Thanks in advance.
Below is a snippet of the serial debug output:
Code:
[ 2.614647] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 2.624626] Detected MACID = 90:59:af:54:8e:7f
[ 2.629256] cpsw 4a100000.ethernet: NAPI disabled
[ 2.636569] input: gpio_keys.13 as /devices/ocp.3/gpio_keys.13/input/input2
[ 2.644458] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 2.658486] ALSA device list:
[ 2.661650] No soundcards found.
[ 2.729476] usb 1-1: reset high-speed USB device number 2 using musb-hdrc
[ 2.893267] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.901818] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 2.908978] devtmpfs: error mounting -2
[ 2.913274] Freeing init memory: 236K
[ 2.919370] Failed to execute /init. Attempting defaults...
[ 2.927598] Kernel panic - not syncing: No init found. Try passing init= option to kernel. See Linux Documentation/init.txt for guidance.
[ 2.940635] [<c001041d>] (unwind_backtrace+0x1/0x8c) from [<c0498049>] (panic+0x55/0x14c)
[ 2.949181] [<c0498049>] (panic+0x55/0x14c) from [<c04949b3>] (kernel_init+0x67/0x90)
[ 2.957364] [<c04949b3>] (kernel_init+0x67/0x90) from [<c000c17d>] (ret_from_fork+0x11/0x34)
[ 2.966176] drm_kms_helper: panic occurred, switching back to text console
Have you asked the great folks over on IRC (#ubuntu-touch)? They might be able to help you.
It's suggested in the porting guide... https://wiki.ubuntu.com/Touch/Porting
Hi, I am having issues with a Huawei modem E173u-1 on my tablet Archos 101 g9 8gb
driver not found.
Can you help me, pls?
USB_ModeSwitch log from Wed Apr 09 17:50:44 PKT 2014
Raw args from udev: 1-1/1-1:1.0
Using top device dir /sys/bus/usb/devices/1-1
----------------
USB values from sysfs:
manufacturer HUAWEI
product HUAWEI Mobile
serial
----------------
bNumConfigurations is 1 - don't check for active configuration
SCSI attributes not needed, moving on
checking config: /data/data/de.draisberghof.pppwidget/app_tmp/12d1.14fe
! matched. Reading config data
devList 1:
config: TargetVendor set to 12d1
config: TargetProduct set to 1506
Driver module is "option", ID path is /sys/bus/usb-serial/drivers/option1
Logger is: /system/bin/log
Command to be run:
usb_modeswitch -I -W -D -s 20 -u -1 -b 1 -g 2 -v 12d1 -p 14fe -f $cB
Verbose debug output of usb_modeswitch and libusb follows
(Note that some USB errors are to be expected in the process)
--------------------------------
Reading long config from command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.4 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x12d1
DefaultProduct= 0x14fe
TargetVendor= 0x12d1
TargetProduct= 0x1506
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice disabled
Success check enabled, max. wait time 20 seconds
System integration mode enabled
Use given bus/device number: 001/002 ...
Looking for default devices ...
bus/device number matched
searching devices, found USB ID 12d1:14fe
found matching vendor ID
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Skipping the check for the current configuration
Using interface number 0
Using endpoints 0x01 (out) and 0x81 (in)
USB description data (for identification)
-------------------------
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
-------------------------
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Could not reset endpoint (probably harmless): -34
Resetting message endpoint 0x01
Could not reset endpoint (probably harmless): -6
Device is gone, skipping any further commands
Bus/dev search active, referring success check to wrapper. Bye.
ok:busdev
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ...
Waiting for device file system (1 sec.) ...
Waiting for device file system (2 sec.) ...
Waiting for device file system (3 sec.) ...
Waiting for device file system (4 sec.) ...
Waiting for device file system (5 sec.) ...
Waiting for device file system (6 sec.) ...
Waiting for device file system (7 sec.) ...
Reading attributes ...
Mode switch has completed
Mode switching was successful, found 12d1:1506 (HUAWEI: HUAWEI Mobile)
Device class of first interface is ff
Now checking for bound driver ...
No driver has bound to interface 0 yet
Module loader is /sbin/insmod
Trying to find and install main driver module "option"
Trying to find module "option"
Loading support module /lib/modules/usb_wwan.ko
Error: insmod: cannot insert '/lib/modules/usb_wwan.ko': Invalid module format (-1): Exec
format error
Loading main driver module "option"
Error: insmod: cannot insert '/lib/modules/option.ko': Invalid module format (-1): Exec
format error
Falling back to "usbserial"
Module "usb_serial" not found, can't do more here
Driver binding seems to have failed
All done, exiting
please answer!!!
i'm solved the problem by replacing the nucleus
Hello,
First, please apologize my english.
For few days i'm trying to flash android on my onda v919 Air V9 dual OS
I have format the disk with winpe, he is now farmated in fat 32 so there is no OS on the tablet.
I have followed the instructions given by ONDA wich is to put the firmware on an USB stick and boot to "Built in uefi shell" then the tablet boot to the shell and oonly says image type x64 is not supported by this ia32 shell.
I tried to put the firmware on a micro SD and then boot on it, Droidboot launches and the flash fails it just says:
E:installer device ignored
Fastboot init
E:Failed to mount device '/dev/block/sda1' as installer partition using fs_type 'vfat'
ition using fs_type 'vfat'
FASTBOOT CMD WAITING
E:Installer device ignored
E:Installer device ignored
E:No valid installer medium found.
Could not oper /sys/devices/virtual/backlight
I can send fastboot commands when droidboot has booted. I tried to flash with fasboot but when i try i only got
FAILED (remote: flash_cmds error!)
I don't know what i can do so if you have an idea i will try
I should also say that before asking I have searched on XDA and tried everything i could but none worked.
Best regards
Boot issue (failed "claim resource", "platform device creation","controller version")
Simply put, after I install RemixOS and reboot, I get stuck on a screen with the "Android x86" logo and error messages. Is anyone familiar with this problem?
I'm sorry, since I'm a new user I cannot post a link to an album of pictures, but here is the nonhyperlinked album hosted on imgur. imgur.com/a/zau2F
Installation on a Windows 10 computer with Intel i7-6560U processor (Intel Iris graphics 540, no dedicated graphics)
RemixOS 64 bit version: 3.0.207. Installation type: Hard Disk
error message (typed out for anyone else googling this problem):
platform MSFT0101:00 failed to claim resource 1
acpi MSFT0101:00: platform device creation failed: -16
mmc0: Unknown controller version (3). You may experience problems.
Hi
I have an old Cyclone x2 box that I was trying to use as an audio streamer, but the android version on it was so flakey and running spotify on the box was dubious to say the least. I saw a libreelec build for g02ref here https://forum.libreelec.tv/thread/1...f-g18ref-th2-prima-pm-6001-vs-ip166-vs-ip015/ and thought I'd give that a go, but it doesn't power on the usb wifi card, so no wifi.
I tried building my own custom kernel based on the patches found in that thread but (after much pain and headscratching to figure out how to get from AML's DTD files to a uimage file with dtb included) I eventually ended up with a kernel that boots but still won't power on the wifi.
The kernel outputs
[ [email protected]] wifi_dev_probe
[ [email protected]] wifi_dt : interrupt_pin=GPIOX_11
[ [email protected]] wifi_dt : irq_num=null
[ [email protected]] wifi_dt : irq_trigger_type=GPIO_IRQ_HIGH
[ [email protected]] wifi_dt : power_on_pin=GPIOC_7
[ [email protected]] interrupt_pin=52, irq_num=4, irq_trigger_type=0, power_on_pin=112,clock_32k_pin=53
which matches the entry in the DTD but the DTD suggests it's for a broadcom chip and I have the rtl8192cu.
I enabled gpio_sysfs and wrote a script to skip through setting all the values manually but got nowhere, that may have been because some of the gpio pins are marked as not-exportable (I got messages like
pinmux-m6 pinmux: pin-125 (amlogic:gpio:125) status -22
sh: write error: Invalid argument
aml_sdio.0 is using the pin CARD_5 as pinmux
pinmux-m6 pinmux: request() failed for pin 126
pinmux-m6 pinmux: pin-126 (amlogic:gpio:126) status -22
sh: write error: Invalid argument
sh: write error: Device or resource busy
sh: write error: Device or resource busy
uart_ao is using the pin GPIOAO_0 as pinmux
for quite a lot of them) or it may be that there's something else I need to do.
One thing I spotted is that an old working mxlinux kernel I did manage to boot writes
set pinmux c0820b00to the console, and the wifi card appears in the list when the USB powers up there; does that give a hint?
Does anyone know which GPIO pin is actually used for wifi_power by these box? Or alternatively does anyone have a DTS or DTD file for stvmx? The atv1200 dts in the kernel sources doesn't have any info on wifi pins
I tried extracting a DTB from the mxlinux image but none of the tools I can find that claim to do that were able to find one
Thanks
Edit: I should clarify that the reason I want to run this version and not one of the older (and working) openelec builds is because of librespot - being able to DLNA-stream as well as use as a spotify streamer is the ultimate goal)
Is this your wifi module? https://www.aliexpress.com/item/32646318856.html
or are you trying to use an external USB WiFi dongle?, as it appear to be a USB module, im not sure it would have a gpio pin to switch on/off (thought that was handled with software) but im still learning alot and im very probably wrong